Crop tool crops more than I specify

Good morning,
Photoshop has recently begun cropping more of my image than I specify when I use the crop tool. Regardless of shape or size of the crop box I specify, whenever I use the tool and hit enter, the image is cropped down to a small square.
I can use the marquee tool and select crop from the menu with no problem.
Any suggestions?

When the Crop tool is active, do you have any numbers in the little boxes at the top of the Photoshop main window?  If so, clear them out.
-Noel

Similar Messages

  • Is there a way to do the Alpha Inverted tool on more than 1 layer?

    I'm trying to make a object appear behind me and need to have 3 layers done like that.
    Or is there a way to take one layer and cut the time line into parts instead of just editing it? Like having one layers time line cut into 3 different parts?

    Cut the layer's timeline into 3 different parts.
    Use: EDIT - SPLIT LAYER
    You may want to be familiar with expressions, parenting, or have the timing for the animation locked before you do this.

  • Script to find users that are a member of more than one of a list of specific groups

    Hi,
    I need to generate a list of users that are members in more than one group, out of a list of specific security groups.  Here's the situation:
    1) We have about 1100 users, all nested under a specific OU called CompanyUsers.  There are sub-OUs under CompanyUsers that users may actually be in.
    2) We have about 75 groups, all directly under a specific OU called AppGroups.  These groups correspond to a user's role within an internal line of business application.  All these groups start with a specific character prefix "xyz", so the group
    name is actually "xyz-approle".
    I want to write a script that tells me if a user from point 1) is a member in more than one group in point 2).  So far, I've come up with a way to enumerate the users to an array:
    $userlist = get-qaduser -searchroot 'dq.ad/dqusers/doral/remote' | select samaccountname |Format-Table -HideTableHeaders
    I also have a way to enumerate all the groups that start with xyz that the user is a member of:
    get-QADMemberOf -identity <username> -name xyz* -Indirect
    I figure I can use the first code line to start a foreach loop that uses the 2nd code line, outputting to CSV format for easy to see manual verification.  But I'm having two problems:
    1) How to get the output to a CSV file in the format <username>,groupa,groupb,etc.
    2) Is there any easier way to do this, say just outputting the users in more than one group?
    Any help/ideas are welcome.
    Thanks in advance!
    John

    Here is a PowerShell script solution. I can't think of way to make this more efficient. You could search for all groups in the specfied OU that start with "xyz", then filter on all users that are members of at least one of these groups. However, I suspect
    that most (if not all) users in the OU are members of at least one such group, and there is no way to filter on users that are members of more than one. This solution returns all users and their direct group memberships, then checks each membership to
    see if it meets the conditions. It outputs the DN of any user that is a member of more than one specfied group:
    # Search CompanyUsers OU.
    strUsersOU = "ou=CompanyUsers,ou=West,dc=MyDomain,dc=com"
    $UsersOU = New-Object System.DirectoryServices.DirectoryEntry $strUsersOU
    # Use the DirectorySearcher class.
    $Searcher = New-Object System.DirectoryServices.DirectorySearcher
    $Searcher.SearchRoot = $UsersOU
    $Searcher.PageSize = 200
    $Searcher.SearchScope = "subtree"
    $Searcher.PropertiesToLoad.Add("distinguishedName") > $Null
    $Searcher.PropertiesToLoad.Add("memberOf") > $Null
    # Filter on all users in the base.
    $Searcher.Filter = "(&(objectCategory=person)(objectClass=user))"
    $Results = $Searcher.FindAll()
    # Enumerate users.
    "Users that are members of more than one specified group:"
    ForEach ($User In $Results)
        $UserDN = $User.properties.Item("distinguishedName")
        $Groups = $User.properties.Item("memberOf")
        # Consider users that are members of at least 2 groups.
        If ($Groups.Count -gt 1)
            # Count number of group memberships.
            $Count = 0
            ForEach ($Group In $Groups)
                # Check if group Common Name starts with the string "xyz".
                If ($Group.StartsWith("cn=xyz"))
                    # Make sure group is in specified OU.
                    If ($Group.Contains(",ou=AppsGroup,"))
                        $Count = $Count +1
                        If ($Count -gt 1)
                            # Output users that are members of more than one specified group.
                            $DN
                            # Break out of the ForEach loop.
                            Break
    Richard Mueller - MVP Directory Services

  • Print cropped tighter than preview image. Why?

    If I crop a photo in Aperture 3.0.3 as desired (specifying 6x4 constraint) and then preview and print it on 6x4 paper, the print is cropped tighter than either the original photo or the print preview (about 1/4 inch tighter all round. Printer is an Epson R800.
    Why is this happening and how can I get the print preview to show the final print crop accurately?

    I would imagine you are printing borderless? This is typical because of the border extension that your printer driver does to make sure it is borderless. Aperture used to have a calibration function to deal with this more accurately but that is gone in Ap3, I guess it was too complicated.
    RB

  • How to specify more than 6 parameters in the URL or in the HTTP header?

    After applying SAP note 1105368 ,it will be availible to specify more than 6 parameters in the URL  header.
    But i haven't figured out  how to specify it yet.even though i went through the note carefully, but it really hard to understand.
    Is there someone who experienced to specify more than 6 parameters ?
    Inccording to the note,the parameter fileds look like should be
    specified like below.
    parameter1: <SAP:Record namespace="http://sap.com/xi/XI/System/HTTP" name="SAP_URL_EXTENSION">urlext</SAP:Record>
    parameter2:<SAP:Record namespace="http://sap.com/xi/XI/System/HTTP" name="urlext01">Order=4711</SAP:Record>
    parameter3:<SAP:Record namespace="http://sap.com/xi/XI/System/HTTP" name="urlext02">Object=1807</SAP:Record>
    but something about the format doesn't look right....

    Hi,
    I know we can set headers by using some tools. Neoload tool is used to set values into header.
    If Servlet after receiving the request you can set header values and send back with response.
    Check this
    http://www.unix.com.ua/orelly/java-ent/servlet/ch05_06.htm
    Thanks,
    RamuV

  • Custom Administrative Template Error 53 Key name specified more than once

    Hi All,
    Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
    settings. I am trying to set this up so that it is controlled via GPO.
    My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software. 
    The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
    Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
    The adm file I have so far is below
    TIA
    Jason
    ---------------------------------------------CUT---------------------------------------------
    CLASS User
    CATEGORY "App Site Settings"
    POLICY !!Site1Policy
    EXPLAIN !!Site1Explain
    KEYNAME "Software\ApplicationCompany\Site1\Access"
    VALUENAME "SystemDatabase"
    VALUEON "D:\\App\\Data\\App.mdw"
    VALUEOFF DELETE
    KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
    VALUENAME "ConfigPath"
    VALUEON "D:\\Site1\\Data"
    VALUEOFF DELETE
    KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
    VALUENAME "ConfigFile"
    VALUEON "D:\\App\\Data\\App_Comms.mdb"
    VALUEOFF DELETE
    VALUENAME "SysConfig"
    VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
    VALUEOFF DELETE
    END POLICY
    POLICY !!Site2Policy
    EXPLAIN !!Site2Explain
    KEYNAME "Software\ApplicationCompany\Site2\Access"
    VALUENAME "SystemDatabase"
    VALUE "D:\\App\\Data\\App.mdw"
    KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
    VALUENAME "ConfigPath"
    VALUE "D:\\Site2\\Data"
    KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
    VALUENAME "ConfigFile"
    VALUE "D:\\App\\Data\\App_Comms.mdb"
    VALUENAME "SysConfig"
    VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
    END POLICY
    END CATEGORY
    [strings]
    Site1Policy = "Site1 settings"
    Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
    Site2Policy = "Site2 settings"
    Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

    Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
    ---------------------------------------------CUT---------------------------------------------
    CLASS USER
    CATEGORY "ApplicationSettings"
    KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
    POLICY !!SITE1Policy
    #if version >= 3
    EXPLAIN !!PolicyExplain
    #endif
    KEYNAME "Software\ApplicationCompany\Site1\Access"
    PART !!ConfigFilePolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
    VALUENAME ConfigFile
    DEFAULT !!ConfigFileDefault
    END PART ;!!ConfigFilePolicy
    PART !!SystemDBPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Access"
    VALUENAME SystemDatabase
    DEFAULT !!SystemDBDefault
    END PART ;!!SystemDBPolicy
    PART !!SysConfigPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
    VALUENAME SysConfig
    DEFAULT !!SysConfigDefault
    END PART ;!!SysConfigPolicy
    PART !!ArbitrationPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
    VALUENAME ConfigPath
    DEFAULT !!ArbitrationDefault
    END PART ;!!ArbitrationPolicy
    END POLICY
    POLICY !!SITE2Policy
    #if version >= 3
    EXPLAIN !!PolicyExplain
    #endif
    KEYNAME "Software\ApplicationCompany\Site2\Access"
    PART !!ConfigFilePolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
    VALUENAME ConfigFile
    DEFAULT !!ConfigFileDefault
    END PART ;!!ConfigFilePolicy
    PART !!SystemDBPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Access"
    VALUENAME SystemDatabase
    DEFAULT !!SystemDBDefault
    END PART ;!!SystemDBPolicy
    PART !!SysConfigPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
    VALUENAME SysConfig
    DEFAULT !!SysConfigDefault
    END PART ;!!SysConfigPolicy
    PART !!ArbitrationPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
    VALUENAME ConfigPath
    DEFAULT !!ArbitrationDefault
    END PART ;!!ArbitrationPolicy
    END POLICY
    END CATEGORY
    [Strings]
    ArbitrationDefault =D:\SITE\Data
    ArbitrationPolicy =Arbitration path
    ConfigFileDefault =D:\App\Data\App_Comms.mdb
    ConfigFilePolicy =Application configuration file
    PolicyExplain =Enter Explainition of the Registry settings here
    SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
    SysConfigPolicy =Application site system configuration file
    SystemDBDefault =D:\App\Data\App.mdw
    SystemDBPolicy =Application system database path
    SITE1Policy =Site1 Application Settings
    SITE2Policy =Site2 Application Settings

  • Error: You have more than one Creative players connected. - Recovery Tool for ZEN

    My Zen 4GB cannot be turned on anymore after a failed firmware upgrade (The installation hung up). I tried to run the firmware upgrade executable file again but the player must be on. So I tried to hardware reset by switching the power slide on while pressing the play button, but it still doesn't start. I downloaded and ran the Recovery Tool while the player was connected, but an error message appeared: "ERROR: You have more than one Creative players connected. Please remove all but one, click "OK" to exit and then run this program again." - There was no other players connected but the ZEN. Please help... What can I do

    I have this very exact same problem with the same model. Did you ever find a solution to this?

  • HP Laserjet 400 M401n won't stop printing when more than 1 copy is specified

    I use this HP Laserjet printer on a network. It's brand new. I print from both Macbook Pro and / or Mac Pro running OS 10.9.5. Downloaded and installed latest HP printer driver.
    Problem: I can print 1 page just fine. But when I specify more than that, the printer will not stop printing copies for the number I specified. I have to press the cancel button to stop it. I have tried resetting the printer. No luck.

    I don't use spell catcher.
    I found a workaround posted elsewhere in the Apple discussion forum. When going through the printing dialog boxes, select Preview and print whatever number of pages I need from that window. It works fine so I'll use that method until a future Mac OS X update fixes the problem.
    The security update for OS X on 3-1-06 didn't fix the problem even after I repaired permissions.
    Thanks for responding.

  • More than one X.509 certificate was found with the specified parameters

    Greetings All,
    We are getting an error in our application event logs every minute or so and it seems to be causing search queries to fail. Same error is appearing in the ULS logs.
    System
    Provider
    Name]
    System.ServiceModel
    4.0.0.0
    EventID
    3
    Qualifiers]
    49154
    Level
    2
    Task
    5
    Keywords
    0x80000000000000
    TimeCreated
    SystemTime]
    2014-06-25T02:30:12.000000000Z
    EventRecordID
    92894
    Channel
    Application
    Computer
    Security
    UserID]
    EventData
    System.ServiceModel.ServiceHostingEnvironment+HostingManager/63835064
    System.ServiceModel.ServiceActivationException:
    The service '/0c98374520dc4b748d92a1e51b365dce/SearchService.svc' cannot be
    activated due to an exception during compilation. The exception message is: More
    than one X.509 certificate was found with the specified parameters.. --->
    System.ArgumentException: More than one X.509 certificate was found with the
    specified parameters. at
    Microsoft.SharePoint.Utilities.CertificateManager.GetCertificate(String
    storeName, StoreLocation storeLocation, X509FindType findType, Object findValue)
    at
    Microsoft.SharePoint.Administration.SPIisWebServiceSettings.get_LocalSslCertificate()
    at Microsoft.SharePoint.SPServiceHostOperations.Configure(ServiceHostBase
    serviceHost, SPServiceAuthenticationMode authenticationMode) at
    Microsoft.Office.Server.Search.Administration.SearchServiceHostFactory.CreateServiceHost(String
    constructorString, Uri[] baseAddresses) at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo
    serviceActivationInfo, EventTraceActivity eventTraceActivity) at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) --- End of inner
    exception stack trace --- at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
    System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String
    relativeVirtualPath, EventTraceActivity
    eventTraceActivity)
    w3wp
    6328
    Doesn't appear to affect the component health status or the crawling process, only the return of search results.
    Sorry, something went wrong.
    Search has encountered a problem that prevents results from being returned.  If the issue persists, please contact your administrator.
    I checked the certificates snapin, didn't see anything out of the ordinary but I have a feeling it goes deeper than that.
    Where can I remove this duplicate certificate? Thanks!

    Open IIS and check server certificates
    Check if there is any certificate applied to Security token service
    Did you used any certificate for web application in site
    Check binding of all web application in IIS
    Try to browse
    servername/0c98374520dc4b748d92a1e51b365dce/SearchService.svc from all servers, check the certificate details
    If this helped you resolve your issue, please mark it Answered

  • How to specify more than Two Tables in NATURAL JOIN

    Hi,
    I am using Oracle9i R-2. I want help in writing a Query using Two Tables in SQL*PLUS. I am using ANSI/ISO Standrard for table-joins:
    select col1, col2, descr
    from tab1 natural join tab2
    There are two columns col1 & col2 is common between thse two tables. So, it will join them and query execute well.
    How can i use 3rd table tab3 in the same way in Natural Join...? If column col1 & col2 is available in tab3 also.
    I tried this way, but it gives me error:
    select col1, col2
    from tab1 natural join tab2 natural join tab3
    Is it possible to specify more than two tables in Natural Join Clause.
    Please check that out & help please. Thanks.
    Regards,
    Kamesh Rastogi

    I do not get an error when I try the same thing on the same version, as demonstrated below. Can you post your table structure and a copy and paste of a run of your actual query with the error that you are receiving?
    scott@ORA92> select banner from v$version
      2  /
    BANNER
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    PL/SQL Release 9.2.0.1.0 - Production
    CORE     9.2.0.1.0     Production
    TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
    NLSRTL Version 9.2.0.1.0 - Production
    scott@ORA92> select * from tab1
      2  /
          COL1       COL2 COL3
             1          1 A
            10         10 B
    scott@ORA92> select * from tab2
      2  /
          COL1       COL2 COL4
             1          1 C
            20         20 D
    scott@ORA92> select * from tab3
      2  /
          COL1       COL2 COL5
             1          1 E
            30         30 F
    scott@ORA92> select col1, col2, col3, col4, col5
      2  from tab1 natural join tab2 natural join tab3
      3  /
          COL1       COL2 COL3 COL4 COL5
             1          1 A    C    E
    scott@ORA92>

  • Can BO universe design tool read from more than one data source

    Hi Experts
    can I add personal data (from excel or Text) on a designer that is connected to relational Database
    can we combine more than one universe from different data sources to do so
    Please advise
    thanks all

    Thanks for reply
    I tried the linked universe concept but it is not working when I read in this topic in the universe design tool guide it indicated that
    both universes should have the same database I cote from this book
    ("The core universe and derived universe use the same data account, or database, and the same
    RDBMS.")
    I also checked in the designer help it says the same condition
    If you have idea how to do so please send me the steps
    thanks

  • ___When I have a multi page Ai file and 'Save as', it saves more than just the page I specified

    When I have a multi page Ai fil e (50 pages) and 'Save as', it saves more than just the single page I specified (ie. Range 1-1)... it saves all 50 over again? How do I just save 1 of the 50?

    Just answered my own question - if I use 'Save a copy' it works... must be a glitch

  • When I export photos to Iphoto slideshow they crop more after each play. Is this common?

    When I export photos to IPhoto slideshow they crop more and more after each play. Is this common?

    No. In fact, I've never heard of it before.
    It might help if you could give us some details. What do you mean by "export photos to iPhoto Slideshow"? DO you mean you're adding photos to a slideshow in iPhoto? Or hat you created a slideshow in iPhoto and exported that to the Finder?

  • How to fix "More than one receiving system has been specified for the BAPI"

    Due to patching the HR system I am testing the functionalities in our test environment before patching the production system. When doing a hiring action (in our test environment) I get this error message at infotype 0000 when I try to save:
    "More than one receiving system has been specified for the BAPI (AcctngServices, CheckAccountAssignment)"
    It is message no. B1811
    My first suggestion weas that it could be the presence of dual connections in SALE, but disabling one of them didn't help.
    Since the Basis team is currently patching the HR system I wonder if that has any affect that might end out in the above error.
    Anyone who can help me out here? Please?

    Usually, when you have HR and FI on separate boxes, certain FI information (e.g. cost center) do not physically locate on HR box. Instead of replicating these data into HR for integrity check, you have an option (for a few countries) of remotely connecting from HR box to FI to do these checking though BAPI. I think this is the scenario you have (i.e. when doing the hiring, a new ee will be assigned to a personnel area which in turn default a cost center which SAP would need to check for integrity).
    Please go into distribution model, and check if for some reason, this is set up to go to to more than 1 destination for HR accounting integrity check.
    Rgds.
    Edited by: Ted Dinh on Jun 12, 2009 8:55 AM

  • Sysprep : a component is specified more than once

    Hi,
    I had some free time so I started updating our standards WDS image.
    It was on Windows 8.1 ( updates until july/august 2014) and I installed all available updates up to last week.
    Within WDS, I specify an answer file that it should use. This file was working great with the previous image.
    However if I tried to use the same answer file, I get "a component is specified more than once..."
    Any idea's why this should be the case with the same Windows version only few months apart.
    It was in the "specialize" part
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="specialize">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <CopyProfile>true</CopyProfile>
                <TimeZone>Romance Standard Time</TimeZone>
            </component>
            <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipAutoActivation>false</SkipAutoActivation>
            </component>
            <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SearchScopes>
                    <Scope wcm:action="add">
                        <ScopeDefault>true</ScopeDefault>
                        <ScopeDisplayName>Google</ScopeDisplayName>
                        <ScopeKey>Google</ScopeKey>
                        <ScopeUrl>http://www.google.com/search?q={searchTerms}</ScopeUrl>
                        <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    </Scope>
                </SearchScopes>
                <DisableAccelerators>true</DisableAccelerators>
                <DisableFirstRunWizard>true</DisableFirstRunWizard>
                <Home_Page>www.google.be</Home_Page>
            </component>
            <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fDenyTSConnections>false</fDenyTSConnections>
            </component>
            <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <FirewallGroups>
                    <FirewallGroup wcm:action="add" wcm:keyValue="RemoteDesktop">
                        <Active>true</Active>
                        <Group>Remote Desktop</Group>
                        <Profile>all</Profile>
                    </FirewallGroup>
                </FirewallGroups>
            </component>
            <component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <UserAuthentication>0</UserAuthentication>
            </component>
        </settings>
        <settings pass="generalize">
            <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipRearm>1</SkipRearm>
            </component>
        </settings>
        <settings pass="windowsPE">
            <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <UserData>
                    <AcceptEula>true</AcceptEula>
                    <FullName>Prodware</FullName>
                    <Organization>Prodware Belux</Organization>
                </UserData>
            </component>
        </settings>
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <AutoLogon>
                    <Password>
                        <Value>udontneedtoknow</Value>
                        <PlainText>true</PlainText>
                    </Password>
                    <Enabled>true</Enabled>
                    <Username>Prodware</Username>
                </AutoLogon>
                <DesktopOptimization>
                    <GoToDesktopOnSignIn>true</GoToDesktopOnSignIn>
                    <ShowWindowsStoreAppsOnTaskbar>false</ShowWindowsStoreAppsOnTaskbar>
                </DesktopOptimization>
                <OOBE>
                    <NetworkLocation>Work</NetworkLocation>
                    <ProtectYourPC>3</ProtectYourPC>
                </OOBE>
                <UserAccounts>
                    <AdministratorPassword>
                        <Value>udontneedtoknow</Value>
                        <PlainText>true</PlainText>
                    </AdministratorPassword>
                    <LocalAccounts>
                        <LocalAccount wcm:action="add">
                            <Password>
                                <Value>udontneedtoknow</Value>
                                <PlainText>true</PlainText>
                            </Password>
                            <Description>Prodware</Description>
                            <DisplayName>Prodware</DisplayName>
                            <Group>Administrators</Group>
                            <Name>Prodware</Name>
                        </LocalAccount>
                    </LocalAccounts>
                </UserAccounts>
            </component>
            <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <UserLocale>nl-BE</UserLocale>
                <UILanguage>en-us</UILanguage>
                <SystemLocale>nl-BE</SystemLocale>
                <InputLocale>0813:00000813</InputLocale>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim:e:/temp/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>

    Hi,
    Personally, I think the answer file should be correct, but always a good choice to verify it again, if you get any progress on this issue, please keep us updated.
    Regarding to the error "This application requires version 6.3.9600.16384 of the Windows ADK." if the ADK version is right is your system, then it might be some corrupted .dll in your system for the toolkit, to confirm this, please try another answer
    file and check the verification, see if it work.
    You can also refer to this link, check if it can give ua any hints
    https://social.technet.microsoft.com/Forums/en-US/11438771-e635-4734-bba3-4729b5cc5747/unable-to-create-sysprep-answer-file-for-server-2012r2-preview?forum=mdt
    some more reference links
    http://www.gregorystrike.com/2010/07/23/sysprep-specialize-pass-error-resolution/
    https://social.technet.microsoft.com/Forums/windows/en-US/0e40e579-4ceb-40b7-b25c-3420fd68db97/syprep-error-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize?forum=w7itproinstall (the
    last reply)
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for