Cropping with magic lasso and wand and polygon tool, no crop button

Thank you. I can see the green check mark at bottom of photo to finish a square crop. But where is the button after selecting an area with magnetic lasso or wand to crop, unless this s is not used for cropping? Tutorial doesn't mention neither the button nor cropping.
Note: I had to retype my question all over again, when I just clicked "submit question" and then this page pops up.

Once, again, there is no program on earth that can do this. Many programs including PSE, can create transparent areas in an image but there is no digital image in existence that is not rectangular. When you use the magic extractor you are creating transparency, not cropping to a non-rectangular shape---the extractor does not crop your image in any way whatever. It's still exactly the same dimensions when you finish as it was when you entered the extractor. No version of Photoshop can do this, because it can't be done under current technology.
You can crop an image or you can isolate an object with transparency but those are not both the same thing.

Similar Messages

Does apple have an issue with magic mouse and adobe

does Apple have a problem with magic mouse and Adobe Photoshop/Indesign/Illustrator, scrolling uncontrollable, pages moving of their own accord etc.
If so, whats the cure and why does Apple not admit to it?
Badgolfer4

it's rare that a mouse would perform in a different manner between different applications
I would troubleshoot with other apps to see if it was just adobe apps
and then I would troubleshoot by trying a different mouse
could be the mouse was defect

Line and polygon tool angles locked. not able to place point where needed...

I am not able to place the cursor in the desired position when using the line and polygon tool to outline... I read something about holding down the shift key to achieve this effect however I am not holding down the shift key and this effect is not desired.

Some how the 'snap to grid' got turned on in the view toolbar. Turned it off and it fixed the problem.

Swipe between pages feature is freezing with magic mouse and magic trackpad in Mavericks

I am experiencing a bug in Mavericks with my Magic trackpad and the Magic mouse. This bug comes and goes and is very sporadic. When it happens I am usually in a browser like Firefox or Safari, or in iPhoto. Anything that uses the Swipe between pages feature usually locks up, and on top of this it locks the scroling up and down function in the browsers and in iPhoto. The only thing that makes these functions work again is to reeboot or turn off bluetooth and turn it back on. I see that many people are having this problem in other posts, and I am just wondering if Apple is actually working on this bug or has somebody found what trigers this bug and do they have the fix for it?
Thanks for your help
Chris

Maybe this will help. You can look for other ideas in the 'More Like This' box to the right.
https://discussions.apple.com/message/25421934#25421934
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Problems with magic mouse and wireless keyboard at the same time

I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
What do you think about rarely issue?
Thanks.

Hello:
Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to use SOA Suite in conjunction with SOA Analysis and Design Tools

Hi everybody,
I am a novice in this field and I need some help regarding integrating analysis and design tools with SOA Suite.
We used to analyze and design with Oracle Designer and use its powerful form generator to develop a system. It almost covered all the software lifecycle and kept the traceability between anlaysis,design and implementation.
I have studied about the SOA concepts and read some papaer about SOA Suite. I have also installed the SOA demo based on SOA Suite and I found it absolutely amazing, but my problem is that It seems oracle does not have any tools for SOA Analysis and Design. am I right? if so, How can we analyze and design a system based on SOA concepts and implement it using soa suite in such a way that keeps traceability? What tools is used for this purpose?
It seems that IBM have some tools like Rational Software Architect and Rational Suite which enable people to design and analyze based on SOA concepts and then generates some pieces of code (like oracle designer in old days) but is it possible to design in these tools and then generating codes for SOA Suite ? (for example generating a bpel file from a design model)
As I told before I am a novice in this field and I would be so grateful if other users can share their expriences regarding this matter.
Any help would be highly appreciated.
Thanks in advance,
Navid

Learn About All Things SOA:: SOA India 2007:: IISc, Bangalore (Nov 21-23)
Aligning IT systems to business needs and improving service levels within the constraints of tight budgets has for long been the topmost challenge for CIOs and IT decision makers. Service-oriented Architecture (SOA) provides a proven strategy to clearly address both of these objectives. Creating more agile information systems and making better use of existing infrastructure are two leading factors that are boosting SOA adoption across large, medium, and small Indian industries from the BFSI, Retail, Telecom, Manufacturing, Pharma, Energy, Government and Services verticals in India. If you are an IT decision maker belonging to any of these verticals, SOA India 2007 (IISc, Bangalore, Nov 21-23 2007) presents a unique opportunity to gather cutting-edge business and technical insights on SOA and other related areas such as BPM, BPEL, Enterprise 2.0, SaaS, MDM, Open Source, and more.
At SOA India 2007, acclaimed SOA analysts, visionaries, and industry speakers from across the world will show you how to keep pace with change and elevate your IT infrastructure to meet competition and scale effectively. The organisers are giving away 100 FREE tickets worth INR 5000 each to the first 100 qualified delegates belonging to the CxO/IT Decision Maker/Senior IT Management profile, so hurry to grab this opportunity to learn about all things SOA. You can send your complete details, including your designation, e-mail ID, and postal address directly to Anirban Karmakar at [email protected] to enrol in this promotion that is open until 12 October 2007.
SOA India 2007 will also feature two half-day workshops on SOA Governance (by Keith Harrison-Broninski) and SOA Architecture Deep Dive (by Jason Bloomberg). If you are an IT manager, software architect, project leader, network & infrastructure specialist, or a software developer, looking for the latest information, trends, best practices, products and solutions available for building and deploying successful SOA implementations, SOA India 2007’s technical track offers you immense opportunities.
Speakers at SOA India include:
•     Jason Bloomberg, Senior Analyst & Managing Partner, ZapThink LLC
•     Keith Harrison-Broninski, Independent consultant, writer, researcher, HumanEdJ
•     John Crupi, CTO, JackBe Corporation
•     Sandy Kemsley, Independent BPM Analyst, column2.com
•     Prasanna Krishna, SOA Lab Director, THBS
•     Miko Matsumara, VP & Deputy CTO, SoftwareAG
•     Atul Patel, Head MDM Business, SAP Asia Pacifc & Japan
•     Anil Sharma, Staff Engineer, BEA Systems
•     Coach Wei, Chairman & CTO, Nexaweb
•     Chaitanya Sharma, Director EDM, Fair Isaac Corporation
A partial list of the sessions at SOA India 2007 include:
•     EAI to SOA: Radical Change or Logical Evolution?
•     BPEL: Strengths, Limitations & Future!
•     MDM: Jumpstart Your SOA Journey
•     Governance, Quality, and Management: The Three Pillars of SOA Implementations
•     Building the Business Case for SOA
•     Avoiding SOA Pitfalls
•     SOA Governance and Human Interaction Management
•     Business Intelligence, BPM, and SOA Handshake
•     Enterprise 2.0: Social Impact of Web 2.0 Inside Organizations
•     Web 2.0 and SOA – Friends or Foe?
•     Achieving Decision Yield across the SOA-based Enterprise
•     Governance from day one
•     Demystifying Enterprise Mashups
•     Perfecting the Approach to Enterprise SOA
•     How to Build Cost Effective SOA. “Made in India” Really Works!
For more information, log on to http://www.soaindia2007.com/.

Can you be more selesctive with teh Lift and Stamp tool?

I use the lift and stamp tool a lot. Mainly on metadata. The problem is that the metadata/adjustments come in categories. You can see all the info of the pic your lifting from, and you can choose to only lift & stamp keywords or just Iptc, Label, rating etc.
My question is, can you select one specific field from these categories?
For example right now I only want my pictures to share Caption, but keep the information of provider and content location which varies from image to image.
is this possible?
Thank you in advance
Eleni

I don't want to delete any of the IPTC info.
I just want to lift Caption from IPTC and leave any other IPTC info untouched in both images (lifted and stamped)
So the image I'm lifting has a different provider from the one I want to stamp but the should all have the same caption. How can I only lift and stamp the caption?
thank you

Problem with Magic TrackPad and Macbook Pro

I just bought the Apple Wireless Keyboard and Apple Magic TrackPad for my home desktop setup. I connect my Macbook Pro 13" (from august 2010) to a Dell U2410 screen.
Everything works perfectly for a while, but then the cursor starts jumping around on the screen when I use the Magic TrackPad. Now here comes the weird thing, if I open the lid on the Macbook just a few inches the jumping stops completely and the Magic TrackPad works perfectly again.
I have tried googling a bit and browsed these forums also - no luck finding a solution.
I have also tried connecting a USB mouse to the Macbook when the cursor started to jump around - no problem with the USB mouse. I have also tried a different Magic TrackPad that my friend also just have bought for his setup - same problem after a short time.
Everything is updated to the latest software and firmware.
Thank you in advance for your help.

I have the same problem with a Trackpad paired with a new Mac Mini just purchased in September. After a while, my trackpad also starts to exhibit behavior similar to those described by Hecro. The trackpad cursor feels frozen, or else it jumps around, often trying to stay away from or jump over any hyperlink in either text or graphic form on the page I am viewing.
I find that if I pick up the trackpad and hold it above my palm between my thumb on one side and my fingers on the other side — so there is no pressure on the clicking feet on the bottom of the trackpad — a "jumping" trackpad instantly becomes a "stable" trackpad. Put it back down on a surface and it starts jumping again.
Also, when it starts jumping or skipping, I also find that if I use one finger and bear down hard on the trackpad, it resumes being responsive.
I am filing a comment about this on Apple's feedback forum at www.apple.com/feedback at the advice of a Genius at the Apple Store at Cambridgeside in Cambridge, Massachusetts USA.

Can i receive a fax with magic jack and a mac?

Can I receive a fax with just magic jack VOIP and a mac? I have no land line.

sarahfromberkeley wrote:
how can I receive a fax? The phone jack does not seem to fit in the ethernet port....(OS 10.6.7)
The MacBook has no fax-modem. You will need an external (USB) modem.
Stedman

Connection problems with Magic Mouse and handoff

I did a clean install of 10.10.3 and since then the Magic Mouse has had problems connecting. First it wouldn't pair. After a few reboots and repeated attempts I was able to pair the mouse with the rMBP. After waking from sleep it now no longer connects. I select the mouse in the Bluetooth menu and connect. Connection appears on the screen, but the mouse doesn't respond. After a few moments I get Connection Lost on the screen.
In addition to the mouse problems I have completely lost any hand off capability to or from the iPhone to the rMBP or back. It's like the Bluetooth connection between the devices is not working or is too weak to function.
It would be very much appreciated if any one has any suggestions on the cause or to a solution.
Thanks.

Hey Tom,
NVRAM and PRAM are, while technically different, effectively the same. Newer systems utilize NVRAM to store the same information that was stored in PRAM on older Macs.
On older Mac computers, similar information was stored in Parameter RAM (PRAM). Resetting NVRAM on Intel-based Macs using the same key combination is like resetting PRAM.
How to Reset NVRAM on your Mac
https://support.apple.com/en-us/HT204063
Cheers,
Allen

IMac 27" i5: Bluetooth Enabler Driver Problem with Magic Mouse and Keyboard

So I just got my iMac 27" Quad Core i5 computer and was able to succesfully install Windows 7 64-bit (using this guide to get past the blank screen problem http://discussions.apple.com/thread.jspa?messageID=10533092). I then installed the Boot Camp 3 drivers from the Mac OS CD and updated windows via Windows Update. Everything seemed to work well.
I even had right click and scrolling capabilities with the MAGIC MOUSE! Also, all the keys were functional on the wireless keyboard.
However, after a few minutes of use the keyboard and mouse would hang and get stuck and I would have to do a hard reboot of the machine. I uninstalled the Apple Bluetooth drivers from the Add/Remove Programs menu and it fixed the problems with the devices getting stuck. However, function keys on the keyboard (brightness, volume, etc.) and scrolling in the Magic Mouse now not work. Is anyone else having this problem?

I found a solution, and everything now works! I followed step three in this discussion http://discussions.apple.com/thread.jspa?threadID=2221427&tstart=0 which says:
Disable power management for Bluetooth Radio. Open device manager, open Bluetooth Radios and right click on "Apple Bluetooth". Select the "Power Management". Uncheck "Allow the computer to turn off this device to save power".

My new MacBook Pro Bluetooth is intermittent with Magic Mouse and music

Bluetooth keeps disconnecting then reconnecting randomly... Both music and Magic Mouse. Any ideas... THANKS, your friend in Ohio...

Hello Ohio friend
Try making the devices favorites.
Also, I would reset the PRAM and SMC.
Barry

Problems with Magic Mouse and Apple Wireless Keyboard battery levels 10.6.7

Last day, when I update to 10.6.7, Mac tells me that the batteries of the mouse and the keyboard is 18850648374% and in the Preferences panel always tell me 100%, but the other day Mac tells me that the keyboard had no battery and that's not true
How can I fix it?
This is driving me crazy!
Thank you!
P.D: sorry for my bad English, I'm Spanish...
Message was edited by: Alfonso Garcia
Message was edited by: Alfonso Garcia

Getting Bluetooth set up initially in Bootcamp is a bit of a hit and miss affair in my experience, but persistence pays off, and connection is reliable. I gave up with the keyboard on my Mac Pro at one stage, tried again a few days later and it worked.
How did you do it?
Persistence and repetition, reading lots of threads and getting snippets from various sources, can't recall any silver bullets.
Have you searched this forum, there are a LOT of posts on the subject.
Links please? I can't find any.
If you type "bluetooth" in the search box while at the top level of the Bootcamp section you will get six pages of hits. Here are just a few, not necessarily the best or a complete list or in any particular order, but they contain relevant info.
I can't remember the detail now but one of the key steps for me was launching the bluetooth "service" mentioned in some of these links. Initially option wasn't appearing at all. Also mine (and others) seems to need a single click after boot to be activated. If you try and move it before a click it won't respond so you might think it wasn't working.
BTW I am assuming you have successfully installed the Boot Camp 3.1 drivers?
http://discussions.apple.com/thread.jspa?threadID=2221427&start=0&tstart=0
http://discussions.apple.com/message.jspa?messageID=10943844#10943844
http://discussions.apple.com/thread.jspa?messageID=10669525&#10669525
http://discussions.apple.com/thread.jspa?threadID=2057008&tstart=0
http://discussions.apple.com/thread.jspa?messageID=10948512&#10948512
http://discussions.apple.com/thread.jspa?messageID=10935130&#10935130
I am afraid at this point I stopped trawling through looking for the most relevant ones so the above is incomplete.

HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

Cropping with magic lasso and wand and polygon tool, no crop button

Similar Messages

Maybe you are looking for