Cross Business Area posting restriction

Dear Experts,
Is it possible to restrict in Cross business area posting through configuration? I want to keep validation in cross business area posting.
Sourav

Hi Gaurav
Its not working. Can you tell me, what I have to write the logic in GGB0 or OB28 for restrict the Cross Business area posting.
Sourav
Hi Guys,
The issue is closed. I have done it through Substitution. For that we wrote the logic in user exist.
Sourav
Edited by: sourav1785 on Feb 2, 2012 3:34 PM

Similar Messages

Cross Business Area Balance Sheet

Hi Experts,
Can u please guide me where can i get the cross business area balance sheet?
Earlier responses will be highly appreciated.
Regards,
Mithil.

Hi
Goto TCode F.01 and enter your business areas in selection parameters.
Cheers
Srinivas

Cross Business area Transactions bettween two Business area in Classic GL

Dear experts,
we are not in new GL and we are still in Classic G/L and we have two business areas where we are doing cross business transactions and clinet want tallied trail balance of each month.
How can we achive the above situtaion. I know new G/L where systeom will take care for tallied trail balance by using Zero balance clearing account.
Thanks Reagards,
Bramhaiah

Please activate Business area financial statements in OB65.
Indicator: Business area financial statements required?
    Indicator that a balance sheet and/or a P&L is to be created per
    business area for internal purposes.
Use
    If the indicator is set, then the "Business area" field is always ready
    for input, regardless of the field control of the posting keys and of
    the accounts when you enter documents. This indicator results in
    required entries in the Controlling (CO), Materials Management (MM), and
    Sales and Distribution (SD) components.
Rgds
Murali. N

Capitalization of cwip- Business area posting

Dear All,
We are capitalizing assets through Internal Orders. The orders are created with respective business area wise and business area has given in the order. At the period end process While execution of Ko8G the system is posting corrects FI entry with respective Business area. Then we use partial capitalization through ko88. The system is posting FI docuemnt with Default Business Area which we specify in Document Splitting-Edit Constants for Nonassigned Processes .
Can any help.
b.s.rao

Please check your document splitting rule. This happens when splitting rule is not able to find out hte correct business area from corrosponding line items.

Cross business area functionality

Dear Sir,
Is there faciltiy in 4.7 version for cross functionality for business area
if it is than how to work on both customisation and user level wise
Regards
Raj

Thanks for repsonse
Actually i wanted to know that one entry is passed in 1 business Area and 2 entry in 2 business area.
To make them a zero impact entry another backend entry is passed by the system automatically.
is that possible.
Regards
Raj

Business area reconciliation

We are using business areas in balance sheet ..we have cross business area transaction .we need to run a business area recociliation so that business area clearing account can be posted and trial balance can be taken out ......I have done the settings in recociliation ledger put the business area clearing account ...please tell me what tcode i need to run to pass business area differences automatically thourgh SAP ...please can u guide me ....

Check if you can pass the business area using a substitution in OBBH with a certain set of pre requisites as an example by creation a set in GS01 for the bank GL accounts which you want to substitute with a common business area.
Thanks and regards
Kedar

AS02 Change Business Area

Dear all,
I would like to transfer an asset from 1 cost center to new cost center which is crossing business area.
i had searched through forum and found there are only 2 ways to maintain this.
i would like to maintain same asset number for this transfer, therefore i activate iMG > Specify Time-Independent Management of Organiz. Units.
However when i change this using AS02, error message shown F5 814 "Document Type not defined".
Kindly advise on the necessary config...

Hi
Please check the content of online help documents for the IMG customizing: Asset Accounting -> Master Data -> Specify Time-Independent Management of Organiz. Units:
You need to make this specification if the following applies: You want to be able to change the assignment to a business area or cost center using a simple master data transaction, although you create balance sheets at the business area level or profit center level. The system then automatically creates a transfer document when you make this master data change to the business area or cost center
That means you have to define a document type for the transfer document created by above activity.
Best regards
George

Substitute business area after document splitting or when creating document

Hi experts,
I have to do a substitution of business area after document spliting, but i saw in previous threads that it's not allowed by SAP to modify a document after spliting. So if i do this substitution when I create a document, for example in f-02 or fb01,is it possible? And how can I do? With user-exit or Badi?
I have a specific table which contains all business areas which I should put into the document:
BUKRS, GSBER
CompA, BA 1
CompB, BA 2
CompC, BA 3
Thank you for giving me some ideas.

If each Company code has a different business area, why do you need to populate it in the first place?
The definition of a business area is that is can cover a range of Company Codes, but not be directly linked to one. I would suggest your use for Business Area is wrong.
You are right about changes after splitting, however I would check with an ABAP'er on this or OSS.
Also, if you are saying Business Area is Company code dependent, then there should not be a problem as the Business Area posted to will be correct, as an accounting document can only be for a single Company Code.
You should have your business are validation, or substituion prior to document splitting.
Hope this helps, award points if useful.

Restriction of banks to business area in F110

We have the following requirement.
We have multiple business areas in vendor line item level & we restrict vendor open items to a particular business area when making payments (T-code F110) by using the "Free Selection" tab.
Also we have assigned the bank accounts/House bank/Bank ID to business areas in customization(FBZP -> Bank determination -> Bank accounts).
We need to validate the House bank & the bank ID according to the business area defined in the "Free Selection" tab.
Is there any method we could validate the above?
Thanks/ Tharanga

Tharanga
When you are selecting MAINTAIN VARIANT.., it is asking for the details like this..
<b>Payment method
Pmt meth. supplement
Business Area
House Bank
Account ID
Check lot number
Restart from Check Num
Currency
Payment document no.</b>
If you set business area, House Bank and Account id, defietenly it will not allow to post in any other business area.
Just make a try if the this satisfy the requirement . there must be other ways also to do the same. I will make a try to find the way if this does not work.
regards
RKG

Cross com code business area postings

hi sap guru,s
how to post cross com code business area postings ?
thaks in advance

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Restricting business areas as per company code

Dear friends,
The Company Code is 1000. This company code has four Business areas IQE,DQE,DPS,KQC.
The Requirement is that when the user selects the company code 1000, He must restricted to pick only the business areas
IQE,DQE,DPS,KQC.
Please advise how to proceed?
Thanks
Sridhar

HI,
one possible sample for business areas:
Prerequisite: BSEG-BUKRS = '1000'
Check: BSEG-GSBER = '0010' OR
BSEG-GSBER = '0100' OR BSEG-GSBER = '0200' OR
BSEG-GSBER = '0400' OR BSEG-GSBER = '0600' OR
BSEG-GSBER = '0700' OR BSEG-GSBER = '0900' OR
BSEG-GSBER = '1900'
Message: (own defined) raised if the business area differs from the ones listed above:
"Business area & can not be posted in company code & ! "
with variables 1: BSEG-GSBER 2: BSEG-BUKRS
BR Christian

"Check Business Area of the company code" error while posting stock

Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Hali

hi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay

Business Area for Vendor Line Items during Payroll Posting

Dear All
We are in ECC 6 version of SAP. We are using Business Area for Internal Financial Statement. We are facing a problem with regard to Business area in Payroll posting. Business area does not appear in vendor line items when we make posting of payroll for multiple business area. We have setting technical accounts for HR. We read SAP note 203276 and it seems that it is possible. Can someone tell us what is the reason that business area not coming in vendor line item while payroll posting.

Hi
That part we have already done. The problem only come when we run payroll and there are vendors belonging to several business area in that case system keep the business area field blank. In case if we set field status required system give error. That is why we run payroll by each business area we also have maintained technical account for 1001.
Regards

Error while posting billing document - Error belongs to Business area/G/L a

Hi All,
When i am posting the billing document i ma getting below error message:
Business Area must be entered, Pl check if the Business Area is correct Message no. ZT017
I think it is due to MWST tax condtion type and respective G/L account only.
When i post 17% tax of MWST i am able to post it - it is having one G/L account,
When i post 5% tax of MWST, i am not able to post it - Different G/L Account - I am getting above error.
Please suggest us to proceed further.
Regards
Lakshmikanth

Hi Lakshmipathi,
This is not at all related to VKOA settings, because the G/L account determination through OB40 here. But every thing is in place. A1 tax code with XXXXXX G/L account is working fine, A2 tax code with YYYYY G/L account is not working fine. If change A2 tax code G/L account to XXXXXX, it is working fine. Here only with YYYYY G/L account issue,
The error details already available in this thread.
Thanks and Regards
Lakshmikanth

Error while posting business area to TCODE J1IH using BDC

Hi ,
Using BDC i am trying to post values to J1IH.
Here, the business area is not getting posted.
Can you help me ?
regards
ekadevi S

Thanks for your quick response, Michael!
I have another question on import. I imported a folder and it got imported with a warning (A folder named 'Folder Name' was created or modified during the import but is not in a business area
Import completed, but with warnings. Please check the result.
I can see the folder in the database table. Is there a way to add this folder to the business area? Or my only option is to delete the folder out of EUL?
Thanks once again!
AJ

Cross Business Area posting restriction

Similar Messages

Maybe you are looking for