Crs_stat display removed database.

hi all
I have used srvctl remove database to remove the database,but crs_stat -t still shows that the database still there:
crs_stat -t
Name           Type           Target    State     Host
ora....11.lsnr application    ONLINE    ONLINE    nzddb11
ora....b11.gsd application    ONLINE    ONLINE    nzddb11
ora....b11.ons application    ONLINE    ONLINE    nzddb11
ora....b11.vip application    ONLINE    ONLINE    nzddb11
ora.zddb1.db   application    OFFLINE   OFFLINE
try to remove againg:
srvctl remove database -d zddb1
+Remove the database zddb1? (y/[n]) y+
PRKR-1001 : cluster database zddb1 does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: zddb1
How to solve this problem?
Thanks

hi all
crs_unregister solved the problem.
Thank you.

Similar Messages

My Databases Panel will not display my Databases?

The issue "This server behavior requires a Cold Fusion Data
Source" happens to me periodically when DW crashes after a week or
two of non-stop use and all of my Databases "disappear" under the
Database Panel? DW thinks that I have no Databases setup under
Administrator? This is driving me crazy.
I can open another Site and it's database's appear in the DW
panel fine, but the Site I was under when DW crashed will not
display in the Database Panel even though all of the webpages that
access those databases work fine so I know it's not a CF server
issue?
I have tried the Site/Advanced/Remove Connection Scripts but
that does not work.
Sometimes if I rebuild the Site under Manage Sites, they will
show back up? Other times I have reinstalled but that is not an
option this time.
This issue seems to be related to a DW & CF connection
only? Any ideas or solutions?
ps: Ben Forta, I remember your comment in the CFWACK chapter
about DW's refusal to display the Databases unless a proper page is
open in DW. While all of my pages are definitely .CFM with Datasets
& querys, this looks like it's related to DW.
Thanks,
jlig

Once again, I opened up DW, created & saved a new .CFM
page, clicked on Insert/Data Objects/Recordset and DW pops up a box
saying:
Before inserting this object, please do the following:
1. Create a site for this file. (checked)
2) Choose a document type. (checked)
3) Ste up the site's testing server. (checked)
4) Specify the RDS login info on CF server. (checked)
5) Create a CF data source.
6) Create a Recordset.
Obviously, I have already set up a CF data source, and can
verify them in the CF Admin page.
What causes DW to "lose access" to my Data sources?
I would appreciate any suggestions and help.
Thanks,
cw

Main display removed - desktop

With the main LCD display removed, will the OS automatically make an external display the default? or will it still try and display the tool bar on the non existent LCD?

If it does, you can press the F7 key to turn on mirroring.

ASM remove database error

Hello all,
i have a standalone 11.2.0.2 server with asm and a database installed. after installation of grid then database. i created a database called name1. I used DBID to change the name from name1 to name2 and when i look at ASM the resource for name1 is still there
crsctl status res -t
resource etc...
resource etc...
ora.name1.db
so as grid user i enter
srvctl remove db -d name1
Remove the database name1? (y/[n]) y
PRKO-3077 : Failed to remove database name1: PRCD-1032 : Failed to remove database resource name1PRCR-1028 : Failed to remove resource ora.name1.db
PRCR-1072 : Failed to unregister resource ora.name1.db
CRS-0254: authorization failure
what i need is to remove the resource and add the proper resource or modify the resource? after many google searches they keep coming up with unlock the grid home.
can any of you help me or suggest ?
Edited by: jason_goucf on Oct 25, 2011 12:40 PM

Hi,
so as grid user i enter
srvctl remove db -d name1Try as OS user (typically oracle ) which DBCA was executed at moment creation of database:
srvctl remove db -d name1Regards,
Levi Pereira
Edited by: Levi Pereira on Oct 25, 2011 4:35 PM

Remove database fragmentation in Essbase

Hi,
Somebody guide me which is best option to remove database fragmentation in essbase at Production server.
I see Average clustering ratio is -> 0.5 which i think should be higher.
Option which i know:-
export data (all) > clear database > load data again.
Regards
Kumar

Either a full restructure or export,clear,import data should remove the fragmentation.
Personally I prefer to export/import.
Cheers
John
http://john-goodwin.blogspot.com/

Displaying available database servers

Hi,
I am using xMII 12.0, I want to display avilable database servers and after selecting a perticular database server,available tables should be displayed in my irpt page.Can any one help in this issue..
Thanks & Regards,
Eswar

Eswar,
One way of achieveing this is using the following URLs:
List of SQL servers:
http://<server>:<port>/XMII/Illuminator?Service=SystemInfo&Mode=ServerList&Method=SQL
Tables:
http://<server>:<port>/XMII/Illuminator?Server=<Server Name>&Mode=TableList
Columns:
http://<server>:<port>/XMII/Illuminator?Server=<Server Name>&Mode=ColumnList&Group=<Table Name>
Now that you know how to extract these values I would suggest try to find out (search the forums, help , wiki etc..) how you can display these values in your irpt pages.
All the Best
Udayan

Display a database item on display item

please i have a varchar database item and i want to display the last item in this field on a display item what should i do and i used the row id to get the last value but it didn't work

Still not clear what you are trying to achieve...
it is just a non database item that i want to view the data in the database item in itIf it a "non database item", how can it have a relationship with a database value?

How to remove database profile in report

Hello,
We have a report right now and upon accessing it, a window asking for a Database Profile comes out. This causes the program to have additional selection parameters for Project Definiton, WBS element etc.
Before we just ran the report for Period, Year, Cost Center Group. Ever since the Database Profile appeared we now have to put * in the WBS element so that the report will run.
Anyone know how to remove the Database Profile selection? One of our users reported that this wasn't in the selection parameters and our developer said there were no changes to the report.
Are there possible reasons why the Database Profile suddenly appeared?
FYI, the report was created using Report Groups (GR51/2/3)
Thanks.

Hi,
What selection criteria you need?
Database profile is needed to access objects from Logical PS DB. You have to put at least one selection object viz. Project Definition or WBS, or Network or Activity.
Create one of your own profile as per requirements and default it in user param.
Regards,
Harsh.
Edited by: Harsh Saxena on Jul 8, 2011 1:13 PM

Don't display empty database fields

Hi
I'm putting together a Stockist database-driven site using PHP & MySQL however some of the fields in the database are blank for some records, i.e. not all will have two lines in the address and not all will have a post code depending on the country etc. I want to display the details as an address block but wonder if there is a way to not display empty fields? Currently if a line is blank then it displays as a blank line but I want to suppress these blank lines to avoid gaps in the address block.
Is this possible?
Paul

Use if/else for your dynamic elements with a condition if field = null show nothing else show the field on the page. Your code will look something like this:
<?php
// show if no City
if (@$row_profile['city'] == "") {
?><?php
// else show City
} else { ?><?php echo $row_profile['city']; ?><br /><?php }
// end if no City
?>
I use something like this on the profile page. The sample code is for the users listed city from the profile recordset. If a city is saved in the database table it will show the city with line break on the page. If there's no city in the database it will not show anything. In the sample code change 'profile' and 'city' to your recordset and your table field, respectively.

Deleting/dropping/removing database using Enterprise Manager (12c)

Hi,
I have run some searches and review the documentation... but I haven't found any way to drop/remove/delete databases using 12c EM.
We have multi-instance environments (one physical server with several instances/database). And from time to time we have to remove one or more instances when they are decommissioned.
So far we are using DBCA, but I wonder if there is any way to do the same with EM "out of the box ...
Could someone point me in the right direction?
Thanks in advance,
Francisco Palomares

Hello Francisco,
the only "out of the box" methods to delete/remove a database would be:
- Create a "User defined procedure" to do the job - Checkout the "Lifecycle Management" guide in the documentation
- When using the Self Service Portal as part of the Cloud Management feature, users would be able to request for a database to be created. When requesting for a database to be created the user can also identify for what period he/she would need the database. Meaning that you can indicate the moment a database need to be decommissioned. In that case not only a Job will be scheduled to create the requested database, but also a job will be scheduled to remove the database after the indicated time frame has passed. Check for this the Cloud Management Guide.
- You could of course also think about doing this using a custom made script that you could schedule from the EM job system.
Well enough material to think about ;-)
Regards
Rob
http://oemgc.wordpress.com

IBook G4 Display Removal

I recently bought a 2005 iBook G4 running Tiger. The display on the iBook was not working when I purchased it and I thought I could either replace the inverter or display and make a quick buck, however it is apparently a mainboard problem instead. I really do not want to bother with changing the mainboard, and the iBook works fine with an external display, so I was wondering if there was any way I could remove the lid of the iBook (screen, frame, etc.) and use only the bottom base connected to an external display (basically as a desktop). I thank you in advance for helping me with this issue!

Some ideas on the complexity of disassembly to remove the display
from the bottom section can be seen among the iFixit.com guides.
If the computer is considered an iBook G4 Mid-2005:
http://www.ifixit.com/Guide/Device/iBook_G4_12%22_1.33_GHz
Some ideas from a troubleshooting part of their site:
http://www.ifixit.com/Wiki/iBook_G4_12%22_Troubleshooting
iBook G4 14" LCD removal instructions:
http://www.screentekinc.com/lcd-removal-instructions_en,apple.shtml
While physically removing the lid, LCD and cold fluorescent backlight
may seem appealing, there may be less trouble in an actual repair.
A takeapart could be problematic, but may be an adventure.
Good luck & happy computing!

Select-options variable to be displayed ,remove 'IEQ'

I'm getting plants as an input range.
Select-options: PLANTS for T001W-WERKS.
since its stored as IEQFD01 internally ,
what should be done to remove this IEQ and display as FD01.
how to display the from and to range like Plant range : FD01 to CH03.
Thanks.

Use something like :
LOOP AT PLANTS.
* sign I, E
CASE PLANTS-SIGN
WHEN 'I'.
     WRITE: / 'including'.
WHEN 'E'.
     WRITE: / 'excluding'.
ENDCASE.
* options EQ LT BT CP GE GT LE NB NE NP
CASE PLANTS-OPTION.
WHEN 'EQ'.
    WRITE 'equal'.
WHEN 'LT'.
     WRITE 'lower than'.
WHEN 'BT'.
    WRITE 'between'
ENDCASE.
WRITE plants-low.
IF plants-option EQ 'BT' or plants-option EQ 'NB'.
    WRITE: 'and', plants-high.
ENDIF.
ENDLOOP.
Regards

Image upload and display from database blob coloumn in ADF

HI
how can i upload and display image from database ( blob ) coloumn in ADF

Hi,
Take a look to this video: http://www.youtube.com/watch?v=_KYquJwYFGE
AP

How to display two database field in report

hi,
i have made a report and in that report i am displaying two fields with same data and these fields are database.In the FORM f_display_report i have given the same name in both fields.But when i going to SUM it gave me only one field SUM and other fields gives null.
give me some guidance as i have to display both fields with same data and same amount of SUM.
Thanks

if i am using the database field i-e wt_qbshb then it gave me the data but when im going to sum both field it gave me sum of only one field.This the code:
ITAB:
BEGIN OF gi_main OCCURS 1,
   belnr      LIKE bseg-belnr,          " Document No.
   buzei      LIKE bseg-buzei,          " Item
   blart      LIKE bkpf-blart,          " Document Type
   lifnr      LIKE bseg-lifnr,          " Vendor No.
    lifntn     LIKE lfa1-stcd2,          " NTN
    lifnic     LIKE lfa1-stcd1,          " CNIC
    name1      LIKE lfa1-name1,          " Vendor Name
    stras      LIKE lfa1-stras,          " Address
    ort01      LIKE lfa1-ort01,          " City
    qekar      LIKE v_t059e-qekar,       " Source of income Description
    qscod      LIKE v_t059z-qscod,       " Section Code
    budat      LIKE bkpf-budat,          " Date of Payment(DD/MM/YYYY).
    dmbtr      LIKE bseg-dmbtr,          " WHT Base Amount
    qsatz      LIKE v_t059z-qsatz,         " Rate of WHT
   dmbtr      LIKE bseg-dmbtr,          " WHT Base Amount
    wt_qbshb   LIKE with_item-wt_qbshb, " Amt of tax collected & deducted
   AMT_TAX    TYPE with_item-wt_qbshb,   "Amt tax Deposited.
    p_tax type sy-datum,                  " Date of Tax Deposited
   witht      LIKE t059z-witht,         " WHT Type
   wt_withcd LIKE t059z-wt_withcd,     " WHT Code
   hkont      LIKE with_item-hkont,     " Gl Code
    text40     LIKE t059ot-text40,       " Section Description
    eatxt      LIKE v_t059e-eatxt,       " Source of Income Code
END OF gi_main,
and this is the BEGIN OF gi_main OCCURS 1,
   belnr      LIKE bseg-belnr,          " Document No.
   buzei      LIKE bseg-buzei,          " Item
   blart      LIKE bkpf-blart,          " Document Type
   lifnr      LIKE bseg-lifnr,          " Vendor No.
    lifntn     LIKE lfa1-stcd2,          " NTN
    lifnic     LIKE lfa1-stcd1,          " CNIC
    name1      LIKE lfa1-name1,          " Vendor Name
    stras      LIKE lfa1-stras,          " Address
    ort01      LIKE lfa1-ort01,          " City
    qekar      LIKE v_t059e-qekar,       " Source of income Description
    qscod      LIKE v_t059z-qscod,       " Section Code
    budat      LIKE bkpf-budat,          " Date of Payment(DD/MM/YYYY).
    dmbtr      LIKE bseg-dmbtr,          " WHT Base Amount
    qsatz      LIKE v_t059z-qsatz,         " Rate of WHT
   dmbtr      LIKE bseg-dmbtr,          " WHT Base Amount
    wt_qbshb   LIKE with_item-wt_qbshb, " Amt of tax collected & deducted
   AMT_TAX    TYPE with_item-wt_qbshb,   "Amt tax Deposited.
    p_tax type sy-datum,                  " Date of Tax Deposited
   witht      LIKE t059z-witht,         " WHT Type
   wt_withcd LIKE t059z-wt_withcd,     " WHT Code
   hkont      LIKE with_item-hkont,     " Gl Code
    text40     LIKE t059ot-text40,       " Section Description
    eatxt      LIKE v_t059e-eatxt,       " Source of Income Code
END OF gi_main,
and this is the BEGIN OF gi_main OCCURS 1,
   belnr      LIKE bseg-belnr,          " Document No.
   buzei      LIKE bseg-buzei,          " Item
   blart      LIKE bkpf-blart,          " Document Type
   lifnr      LIKE bseg-lifnr,          " Vendor No.
    lifntn     LIKE lfa1-stcd2,          " NTN
    lifnic     LIKE lfa1-stcd1,          " CNIC
    name1      LIKE lfa1-name1,          " Vendor Name
    stras      LIKE lfa1-stras,          " Address
    ort01      LIKE lfa1-ort01,          " City
    qekar      LIKE v_t059e-qekar,       " Source of income Description
    qscod      LIKE v_t059z-qscod,       " Section Code
    budat      LIKE bkpf-budat,          " Date of Payment(DD/MM/YYYY).
    dmbtr      LIKE bseg-dmbtr,          " WHT Base Amount
    qsatz      LIKE v_t059z-qsatz,         " Rate of WHT
   dmbtr      LIKE bseg-dmbtr,          " WHT Base Amount
    wt_qbshb   LIKE with_item-wt_qbshb, " Amt of tax collected & deducted
   AMT_TAX    TYPE with_item-wt_qbshb,   "Amt tax Deposited.
    p_tax type sy-datum,                  " Date of Tax Deposited
   witht      LIKE t059z-witht,         " WHT Type
   wt_withcd LIKE t059z-wt_withcd,     " WHT Code
   hkont      LIKE with_item-hkont,     " Gl Code
    text40     LIKE t059ot-text40,       " Section Description
    eatxt      LIKE v_t059e-eatxt,       " Source of Income Code
END OF gi_main,
and this is the PERFROM DISPLAY REPORT:
PERFORM fill_fieldcat USING 'LIFNTN' 11   'NTN' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'LIFNIC' 16   'NIC' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'LIFNR' 10 'Vendor' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'NAME1' 35 'Name' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'STRAS' 35 'Address' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'ORT01' 35 'City' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'QEKAR' 40    'Nature of Payment etc' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'QSCOD' 10 'Payment Section Code' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'BUDAT' 10   'Date of Payment(dd/mm/yyyy)' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'DMBTR' 20   'Value/Amount on which Tax Collected or Deducted' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'QSATZ' 10     'Rate of tax (%)' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'WT_QBSHB' 16   'Tax Amount Collected/Deducted' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'WT_QBSHB' 16   'Amount of Deposited' 'GI_MAIN'.
PERFORM fill_fieldcat USING 'P_TAX'(001) 15   'Date of Tax Deposited(DD/MM/YYYY)' 'GI_MAIN'.
Thanks.

How to remove database name from SQL query

We have an MS SQL server with several databases that are of the same schema but have different data. We do this for testing different environments. We are using Crystal reports for the first time and we are having trouble changing the database location in the designer. If update the data source location to the same database server, but different database name, the data still comes from the original database used when creating the report. We look at the SQL query and it contains the database name and does not change when updating the data source. Therefore the data always comes from the database used when originally creating the report.
How can I remove the database name from the SQL query so the proper database is used when testing the report?

Hi C F
Please ensure you have followed the procedure mentioned below:
In Crystal Reports, there are two ways to set the location of the data source your report points to, depending on your connection type.
For ODBC and Native Connections:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click the data source to be changed. You must click each individual table in the data source one by one. If the data source is a stored procedure you will not see individual tables.
NOTE In Crystal Reports 10, XIR1, and XIR2, if you are mapping from a data source such as a stored procedure where the report designer can not determine which fields should be mapped automatically, you will see a 'Mapping' dialog box where you can manually map fields, as in the procedure cited above.
3. In the 'Replace with' section, click the data source you want the report to use.
4. Click 'Update'.
5. Close the 'Set Datasource Location' window.
The report now points to the new location.
For Native Connections Only:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click 'Properties' to expand it and right-click 'Database Name: <path to database>'.
3. Click 'Edit' and then type the path to the
new data source location.
4. Close the 'Set Datasource Location' window.
The report now points to the new location.
Regards
Girish

Crs_stat display removed database.

Similar Messages

Maybe you are looking for