Crystal Report 2013 - Data not displayed

Dear All
I created one report connecting to SAP Tables directly.
a) I made a new connection - connecting to SAP tables directly.
b) It is connected successuly. It shows all related tables correctly.
c) I selected a table MARA
d) I selected the fields MATNR, ERNAM (for example)
Completed the report.
But on executing, the data is not displayed.. It idspayes 0 records selcted.. ( no errors also )
Can someone help me... Why the dta is is not fetched...
Effectivley, : No data returns when we execute the report.
Regards,
Venkat

Hi Venkat,
Go through below SAP note to over come this issue :
1637505 No data returns when refreshing a reports based off an SAP data source in Crystal Reports.
Symptom
 No data returns when refreshing a report in Crystal Report.
 Reports based off an SAP Customer Relationship Management System (CRM), ECC, ERP... or ABAP functions returns no data in Crystal Reports.
Environment
 Crystal Reports 2008
 SAP Crystal Reports 2011
 BusinessObjects Solution for SAP Integration for XI 3.1
Reproducing the Issue
 Verify from the SAP Customer Relationship Management System that the table or function to which Crystal Report will connect to has data.
 In Crystal Report, create a new report using the connection: SAP Table, Cluster, or Function.
 The new connection will use the Open SQL driver to connect to the table of SAP System.
 Add database fields to the Details section of the report.
 Refresh the report.
 The report returns no data.
Cause
 This is an SAP Netweaver Gateway issue that prevents Crystal Reports from retrieving data.
 When looking at the Crystal Reports logs, you will notice the SAP Gateway Connection to the SAP Netweaver System fails with the error:
 [Tue Sep 27 10:58:21 2011] 5996 5808 SAP: Received return code 1 from RfcWaitForRequest. This is an error. Message CPIC-CALL: 'SAP_CMACCPTP : rc=20
 LOCATION SAP-Gateway on host <host name> / sapgw00
 ERROR Registration of tp <name> from host <host name> not allowed
 TIME Tue Sep 27 1:11:11 201
 RELEASE 720
 COMPONENT SAP-Gateway
 VERSION 2
 RC 720
 MODULE gwxxrd.c
 LINE 3627
 COUNTER 3557
 . Existing receiving thread...
 [Tue Sep 27 10:58:21 2011] 5996 5808 SAP: Data reader received error notification. Preparing to go out of scope.
 For information on how to create a log for Crystal Reports, see the SAP Knowledge Base Article 1220085.
Resolution
 To resolve this issue, consult your SAP BASIS Administrator to update the SAP Gateway to allow your user, or computer, or application to connect to the SAP System. For more information see SAP Note 1408081 - Basic settings for reg_info and sec_info.
 If you have any questions or issues setting security on the SAP Gateway, then create a message for SAP Gateway support, under the component: BC-CST-GW
-Sastry

Similar Messages

Visual Studio 2013 Crystal Report V9 does not display in browser

Hello, I work with Visual Studio 2013, and was anxious for version 13.0.9.1312, glad you came. Well I installed the full version and the report usually opened in VS, but when it does not compile command displays. Published in a local and it worked, but the VS does not work, if you click with the right mouse button to display codes are the codes it, but does not show. I used IE, and nothing Chomo. How does VS2013 use IIS Express as a server. Have any solution for this?

See this post for the answer...
Re: Crystal Reports does not load aspnet_client files to proper IISExpress directory
Don

Crystal Report V9 do not display decimal value HELP!

I have a field in Informix data type is Decimal(6,2)when i used the field in the report, the decimal is not displayedexample: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!

have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.have tried the formula as well but still doesnt work.any other possible solutions, pls help, thanks.

Crystal Report for Enterprise not displaying Long Text from BEx

Hello,
I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report. Can I display long text in the Crystal Report? How?
Thanks,
KP

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Crystal Report Toolbar images not displaying properly in IE?

Hi,
I am using VisualStudio 2012 ,crystal report version 13.0.2000.0 and sp5.
My problem is that after loading crystal report, toolbar image icons (such as print,export etc) are not showing properly in internet explorer(version ie10). But it is displaying correctly in chrome and firefox.
What could be problem ?? Any help will be appreciated ..

See this re. images:
Visual Studio 2012 Crystal Report not working on Windows Server 2012/ 0x800a1391 &#8211; JavaScript runtime error: &…
Also, don't forget to do your own searches - search box is in top right corner and simple search strings are best. E.g.; 'Crystal net red x'.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on
Twitter

Interactive report's data not displaying on the edit form.

I have an interactive report that contains 3 rows. When I click on the edit button next to one of these rows, the edit form displays the data from that row.
But when I click the edit buttons next to the other 2 report rows, I get an error message that states: "ORA-01403: no data found. Error Unable to fetch row."
I do not see why this is happening. The PK of the table involved is "Request Date", so the report's "Link Column" region sends the value "Request Date" to the item P54_Request_Date in the form page.
Any idea why this would work correctly for one of the report rows but not for the other 2?
Clearly, each of the report rows must have a value for the PK, so why would the form not be able to find the same row that the report displays? Is it a problem with the form's "Fetch Row from" process?
Thanks.

Hello:
Your problems are primarily related to in your choice of a 'Date' type as the PK for your table. The Automated Row Fetch (ARF) process uses a SQL statement similar to the one below to retrieve a record from a table select c1, c2, c3 ... from tab where PK_col = :page_item_containing_PK_value . This would work find if the the 'page_item_containing_PK_value' were of the DATE data type. However, all APEX binds are done using varchar2. This means that the 'page_containging_PK_value' needs to have the char representation of the date that matches the default date setting on your database. So the page-item needs to be something like 'DD-MON-YYYY HH24:MI'. In your case the PK item is probably being set to 'DD-MON-YYYY' and therefore the fetch fails.
Now, for the 'issue with the :' in the character representation of the date.The link on the report page uses the standard APEX URL syntax to construct the link
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
As you can see, the ':' acts as the separator that delineates the components that make up the APEX URL. So, having a ':' in the 'itemValues' component will make the APEX engine treat whatever follows the ':' in the value passed as a delimiter as opposed to being part of the value being passed.
Varad

Crystal Report 2011 does not display when keyfigures are zero

I am using Crystal report 2011 with BEX Queries as Data Source. I am not able to see some of the characteristics values when keyfigures are zero or null. In BEX query there is a costCenter Characterstic, few costcenter characteristics values are zero for some months but BEX Query is designed to show as spaces even if the keyfigures are zero for those costcenters. When I am using the same Bex Query with Crystal report 2011 all the costcenters with keyfigures as zero are not showing up on the report. Can anybody suggest how I can show the characterstics values even if all the keyfigures are zero. (I have not selected any kind of suppression in section expert in crystal report), (In Bex Query CostCenter- Properties-Advanced----Access Type for Result values are set to Master Data)

Hi,
Have you made sure the correct Transport files have been loaded on the SAP system? Since you're using CR 2011, you need to make sure the Transports that come with this version of CR are present on the SAP system.
Could you see if the workaround mentioned in SAP Note: 1391673 works for you?
Here's a snippet of the SAP Note:
SAP Development team of BW BEX MDX Interface suggest the following implementation:
Since Crystal Reports is not correctly interpreting the character used to represent NULL values (by default the value: X) please use the Customizing transaction: RSCUSTV4 to change the sent value.
Please note, this is a Global setting, and will also modify the behaviour in BEx application.
WORKAROUND: Create a formula field based on the selection that always returns a number - converting null to 0.
Create a formula in BEx for the KF.
Edit the Selection
Edit the formula to behave like:
COUNT ('KF') * 'KF' + 0
('RKF' + 0) * 1
Not generally acceptable since it requires duplicating fields.
Also, business may not accept 0,00 for a NULL result.
Hope this helps!
-Abhilash

Cannot load report from server in Crystal Reports 2013 Viewer

Hello,
I am having trouble opening a report that is hosted on a Crystal Reports Server (2013) from the Crystal Viewer. I've created and uploaded the reports using the report designer (version 2013). The reports have been uploaded using the "Save As -> Enterprise" to save to my enterprise server. This part works fine. I then navigated to the Crystal Reports Viewer to open my report (that I just uploaded w/ the designer) from the server. Depending on the report, one of two things happens:
1.) I get a loading bar at the bottom right of the screen that says "Operation in progress . . ." followed by an error message:
Unable to Refresh Report
A problem occurred while refreshing on the server. The report may not be configured properly for refresh.
Please contact your server administrator. (me)
2.) I get a loading bar at the bottom right of the screen that says "Refreshing <file name of the report> (<server name>)" followed by... nothing. The loading bar goes away and nothing happens. It goes back to the screen that shows when the application first loads (blank canvas).
I've taken some basic troubleshooting steps to try and rule out any potential issues that came to mind, but I've not been successful.
Any help would be appreciated, thanks!

Hi
Check the below thread
Crystal Reports 2013 data didn't refresh using OLE DB Provider for SQL Server
With Regards
Balaji Sampath

How to Save/Transport Crystal Reports 2013 reports in ECC (not BW)

Hi,
we are using Crystal Report 2013 and have reports which are based on ALV´s and SAP Tables directly.
I want to know if it´s possible to save the reports directly in the ECC system, with transport connection etc. and maybe the possibility to translate the reports later in another language.
I know the way when we have reports based on a BW system, there it is really easy and integrated.
But in this case we are on a normal ECC System, not a BW Enviroment.
At the moment we have the report rpt files locally.
Has someone already done this and or knows a tutorial what steps are to do? (connection, package, roles)
Kindly regards
Max

Hi Max,
Please have a look at this document from Tammy Powlas.
-Abhilash

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SAP Crystal Report 2013 on Windows 2012 and Lotus Notes Databases

Hi everybody, does someone already try to use version 2013 of Crystal Report to report Lotus Notes databases content?
We have been used older version for about 10 years without any difficulties as a native driver exist for Lotus Notes.
But installing the version 2013, we have discovered that lotus Notes is not anymore present int the list of database to connect to...
Can anyone provide sonme help?
Many thank in advance
Dominique Anderegg
Insentia SA
Lausanne - Switzerland
[email protected]

See the SAP Crystal Reports 2013 Product Availability Matrix (PAM), page 9 and download the doc linked to there. According to that doc, Lotus Notes is now only supported via ODBC only.
Also, the search string 'lotus crystal 2013' (search box in top right corner) brings up the following KBA:
1238167 - Cannot create new report off the Lotus Notes Domino native driver in Crystal Reports
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SAP tab in Crystal Reports 2013 issue

We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
"An error occurred while generating a new report templete.
No error"
Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue) and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
Thanks
GORO.

Hi Abhilash,
Thanks for your response.
Yes reports are working in CR 2013 designer.
Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
After exporting to pdf getting above errors...
-Srinivas

IE11 - Crystal Reports - PrintMode ActiveX now displaying PDF prompt (instead of printer prompt)

I asked this question over at stackoverflow and am now taking it here: http://stackoverflow.com/questions/20672254/ie11-crystal-reports-printmode-activex-now-displaying-pdf-prompt-instead-of
It's a simple straight-forward question. IE11 is breaking the ActiveX plug-in used for printing from the Crystal Report Viewer. All the pretty pictures are in the link I provided. But the jist is that for my ActiveX Print Mode reports, the PDF dialog is presented now instead of the normal Printer dialog (unless I use Compatibility Mode)
Other details:
I am using the Crystal Reports that comes with Microsoft Visual Studio 2008. For the life of me I can't remember how this got installed on one of my browser's (maybe an install from Visual Studio?) ... but I've been deploying the Crystal Print Control 10.5 (32-bit; version: 10.5.1.2285).
And as mentioned in the stackoverflow post I have all ActiveX settings enabled and ActiveX Filtering off.

Hi William,
Moved your post to the .NET SDK forum.
CR for VS 2008 was included in the installer of Visual Studio, you can remove it from Add/Remove Programs.
Unfortunately the CR Basic that comes with VS 2008 only had one patch released and that's it. IE 11 was not released when it came out so we could not support it.
Currently there are no versions of CR or our SDK packages that do support it.
Crystal Reports Developer for Visual Studio SP 9 will support IE 11. You can get it from the Overview Tab and then on the left side. But it requires VS 2010 or above and SP 9 will support VS 2013 and IE 11.
In VS you could select either ActiveX or PDF:
I don't have IE 11 but to change the PDF go into the Add-ins menu:
See this link for supported OS's and VS's:
http://wiki.sdn.sap.com/wiki/x/b4JiAw
Also, IE 11 is likely on Windows 2008 Server or possibly Window 8.x.
Best thing to do is upgrade VS and then download the CR installer into VS so it supports current OS's and Browsers.
Don

Crystal Reports 2013 java-error "java.lang.ClassCastException: class com.crystaldecisions..." when promoting

Hi,
when promoting "Crystal Report 2013" report (with data connectivity BW MDX Query) from BO DEV to BO PROD with BO Promotion Mgmt (LCM), we get the following error message in LCM jobs history:
Resolution Status=Overwritten, Dependency Status=All the required dependencies are included.,
Commit Status=Commit attempted and failed.,
Promotion Status=Failure : Object promoted. Update failed.
Error: java.lang.ClassCastException: class com.crystaldecisions.sdk.occa.report.lib.ByteArray:java.net.URLClassLoader@1d634758 incompatible
with class com.crystaldecisions.sdk.occa.report.lib.PropertyBag:java.net.URLClassLoader@1d634758
The report itself is present on BO PROD, but the overwrite (BW DEV MDX Query-> BW PROD MDX Query) is not applied, so report connectivity still points to the BW Query on the development system :-( .
Moreover, the overwrite itself is detected when the job is "test promoted" ("active overwrite").
Before, we successfully were able to transport crystal reports 2013 with overwrite (the connection then pointed to BW PROD). No idea yet what suddenly changed that...
Any ideas what causes the error and what can fix it (no posts found, no SAP note, google also no hits)?
Best regards
Florian Pitschi

Update:
After more investigation, it looks as if the BO Server "CrystalReports2013ReportApplicationServer"
from time to time has an issue - not only when promoting, but also when viewing publications that contain Crystal Report documents or when executing them, the java class error or similar issue is thrown.
Did sb face similar behaviour and knows what is the root cause for "CrystalReports2013ReportApplicationServer" not working probably and throwing the java-class error? - it was running fine for several months, now, the class error showed up twice in one month.
We need to find out what is causing the issue (aleady checked tomcat and BO-logfiles...).
Best Regards
Florian

Crystal Reports 2013 on SAP BW

Hi Gurus,
We are trying to establish connection between Crystal Reports 2013 and SAP BW 7.4. Could you please let us know whether we can create Crystal Reports on following BW objects or not?
-BW BEx Reports
-BW Cubes
-BW DSOs
-BW Master data Info Objects
-BW Multi Provider
Regards
Viswanath

Hi Manoj,
Using the SAP BW MDX Query driver, you can design formatted Crystal reports that are based on data that is stored in SAP NetWeaver Business Warehouse (BW). You base these reports either on queries that are created with SAP Business Explorer (BEx) Query Designer, or directly on the cubes in BW.
See this : Crystal Reports 2011: Connect to an SAP BW data source
Thanks,
DJ

Crystal Report 2013 - Data not displayed

Similar Messages

Maybe you are looking for