Crystal runs sql command of first sub report in the second sub report ?

Hi,
I have report that contains 3 sub reports.
Each subreport is running his own sql command to retrieve it's data.
When moving from the first subreport to the 2nd subreport, we see on the oracle that the crystal runs the sql command of the 1st subreport, and then the sql command of the 2nd subreport.
The results are fine (he ignores the 1st subreport result in the 2nd subreport), but it delays the showing of the 2nd subreport to show.
Why? The 2nd subreport doesn't need the data of the 1st subreport!
How do I cancel that????
BTW - The 3rd subreport is running only his own sql command (As should be).
Thanks.

Hello,
Not without more info about the report and the data. If there is nothing linked from the main report to sub1 then it's going to run and return all data, no filtering. And from the sounds of it to take 5 + minutes per query this is going to affect performance for the whole report.
You may want to re-evaluate why and what the subreports are used for. If they all use the same data the link them in the main report use groups to sort the data.
Having subreports in the Details section is asking for performance problems, every record returned will cause the subreport to run. Not knowing what the subs are doing I can't say for sure....
What you should do also is re-evaluate your Commands for each sub and see if you can do it either in one SQL statement or write a Stored Procedure to do all of the data collection. DB Servers are much more efficient at collecting data than CR will ever be. Pushing just the results to CR makes it simply formatting the results in the Designer and no performance hits....
Talk to your DBA on how to optimize your Command SQL's and how to get them into one SQL or into a SP that dumps the final results into a final SQL * from TEMP Table into Crystal.
Don

Similar Messages

Password keystrokes won't register in Run SQL Command

I'm sorry if this has been answered before. I searched but I couldn't find this particular problem. I'm new to Oracle and I'm trying to install it on my computer. I'm used to using the Enterprise Edition that is available at school, so the Express Edition seems so much different.
In case it is important, I'm running Windows Vista Home Premium (64-bit). When I go to Start > All Programs > Oracle Database 10g Express Edition > Run SQL Command Line, I enter "connect", then it prompts me for a username. I enter "SYSDBA", then it asks me for a password and my keystrokes are not recognized. I tried to just go ahead and enter the password I created when I installed and press ENTER but that didn't work.
I tried going to the Database Homepage, and I can log in with SYSTEM and my password, but my SQL commands and scripts (from school, that work with the Enterprise Edition) don't work. I get this pop-up window with the title "Enter Bind Variables" and the page itself has a SUBMIT button, but there is nothing else there.
I'm totally lost. Any help is greatly appreciated.
Edited by: user10823568 on Apr 1, 2009 11:56 PM

sysdba is a privilege, not a user. SYS and SYSTEM users have the DBA role privileges, SYS owns the catalog (database, tables, datafile, user and object info, all the metadata).
The sys and system users can manipulate just about anything in the instance, using a connect sys as sysdba grants the ability to do a few more management tasks (i.e. shut down the database). Its best to only use those database logins when they're really needed (backups, startups, etc) and create other database users for all the other stuff. A quick way to get started is
connect sys as sysdba; -- or connect / as sysdba;
create user joe identified by joepasswd;
grant resource to joe;
grant connect to joe;
grant create session to joeThe resource privilege is a quick way to get all the rights needed to create tables, indexes, procedures. There are a couple of rights in resource that most admins don't like to hand out to just anyone but it'll get the joe database user rolling.
Now on to that "bind variables" dialog, the script that is running needs some input, take a look at the .sql file and there's probably an ampersand in there somewhere- maybe it wants a user name name, just have to figure out what it wants.
And sqlplus does not echo characters typed in at the password prompt, that's normal.

Clear screen in "Run SQL Command Line" causes the utility to dump in Window

Just for your notice... I have not checked if i can reproduce this on Linux platform or on second node running Windows XP Pro.
But if I use "Run SQL Command Line" utility and do
clear screen
The utility dumps, (not the database though only the utlility)
Maybe some other people could confirm if this findings is a bug or not and if it is a port specific issue with Windows XP only.
Kindly Rgds
/Ulf, Kentor IT Sweden

Tracking info is in
Re: SQL*Plus generated Program Error
-- cj

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Weu0092d like to get Custom reports. The base of reports is Security Audit Log

Wed like to get Custom reports. The base of reports is Security Audit Log files. This is files for SM20.
What does the file structure look like? What is field of it?
Thanks!

Hello Marina
The data written to the security audit log correspond to the DDIC structures RSLGENTR (up to release 4.6) and RSAUENTR2 (in newer releases). DDIC structures can be viewed using TA SE11 (data type).
As I can see you have already opened a thread regarding this. Please don't duplicate the threads, as this only widespreads the information.
Regards,
Désiré

Javascript: Check Internet connection before attempting to run SQL command on remote server

Good evening,
I am developing a form that reads and posts data from/to a table hosted on a remote PC running XP/SQL Server Express 2008 R2. I access the server through the Internet.
My problem is that if the internet connection happens to be down when I -eg- try to save data to the table using the form, the SQL command tries to reach the server for a while, and eventually crashes.
Is there a way to programatically verify that a remote SQL server is reachable over the Internet before attempting to run a command on it?
Many thanks in advance for any help you can provide!
Randy

Did you find a solution to this? I am attempting a similar form and need to verify there is an active internet connection before allowing the form to process.

Run Sql command line is not openning.

Hi !
sql command line is not openning.(windows 2008 enterpise and oracel 11g express)
please tel me is there any other way to open it, i have tried it from the phyical directory also.
but oracel is working properlly.
i wanted it load data from captured data to oracle database. (i was migrating).
yours sincerely
Edited by: 944768 on Aug 14, 2012 12:12 AM

Open a command prompt (cmd), from there run:
c:\> sqlplus user/passwordHow do you plan to "load data", based on what format? Sqlplus might not be the right tool for the job.
Sql*loader is one option. Another option to help with migration is Oracle SQL Developer (separate, free tool).

Running sql commands from a .sql file

Hello , I have this problem. How do i execute sql commands found in a .sql file with jdbc. My RDBMS is mysql.

You will have to open and parse the .sql file, connect to the database, and execute the statements. You can't simply tell JDBC to run your .sql file.
Depending on the complexity of your .sql file this is easy or hard. If its a bunch of e.g. updates or deletes or something you may be able to get away with running it as a block. In Oracle for example, you can put "begin" and "end;" around a bunch of statements and run it all together. In that case your program would open the SQL file, read the text, put it inside a "begin" and "end;", and run it as a single SQL statement.
If its a bunch of statements that must be run independently then you'll have to programatically split them up to run one at a time. If its a select and you want to e.g. print results to the screen, well, then it gets tougher...
- Jemiah

Problem adding data to the CRM /Saas application by running SQL commands

Hello,
I've been following the CRM/ Saas tutorial:
http://www.oracle.com/technology/pub/articles/bobrowski-saas.html
and I tried to run the SQL commands in the tutorial to populate the TENANTS, CUSTOMERS, TENANT_COLUMNS, and USERS tables and keep on getting an "ORA-00911: invalid character" error.
I could use the Object Browser page to do this but would like to know how to do this by running a SQL command.
Has anyone else encountered this problem when trying to populate the tables in the CRM application?
Thanks
Linda

Hello,
Are you sure you copied it correctly?
If you try to run 1 create statement, does that work?
For ex.
-- USERS
INSERT INTO users (username, tenant_id)
VALUES ('MIKE',1);
INSERT INTO users (username, tenant_id)
VALUES ('JOE',2);
COMMIT;
Does that work? I don't see that many special characters...
What you may try to do is to change the ; by a /
for ex.:
INSERT INTO users (username, tenant_id)
VALUES ('MIKE',1)
INSERT INTO users (username, tenant_id)
VALUES ('JOE',2)
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Permission to run SQL Server DTA - dbo access needed --- to the user database, or msdb ?

Hi All,
I am remotely working with a developer who wants to run DTA (SQL Server 2008 R2). I gave the AD Group "ALTER TRACE" permission, and also "execute" permission to xp_msver in master db. I also read that
the user needs to be in dbo group. This is to the user database they wish to use DTA with, correct ? I just want to be sure that dbo to msdb is not needed.
Thank you,
Joe Clark
Joe Clark

Please see the link bellow
http://technet.microsoft.com/en-us/library/ms190987(v=sql.105).aspx
vt
Please mark answered if I've answered your question and vote for it as helpful to help other user's find a solution quicker

Sub:find out the user exit report for any tc

Hi,
i want to find out the user exit report for any tc
Thanks,
jayaraj

Hi,
Pls go through it the following coding. It will helps u.
*& Report YMS_USEREXITTEST *
REPORT YMS_USEREXITTEST no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR' and object = 'FUGR' and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab where pgmid = 'R3TR' and object = 'SMOD' and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt where sprsl = sy-langu and name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
-End of Program-
Thanks,
Shankar

Urgent Please: Cannot publish Reports to the Sharepoint Integrated - Reporting Services Login

Hi,
Sharepoint 2010 / SQL Server 2008 R2
The user I am using in BIDS to deploy the reports has Admin permission to the site collection and databases.
Reporting Services Login prompt all times and I can´t go ahead to publish the reports.
I ve reviewed my deployment properties -
http://msdn.microsoft.com/en-us/library/bb283155(SQL.90).aspx
The same test works to my dedicated server (Sharepoint and SQL Server in the same machine) but not to the enviorement bellow:
Server 1 - SSED, SSAS, SSRS, Sharepoint Web Front (minimal installation)
Server 2 - Sharepoint Server 2010 (SSRS Sharepoint Integration Mode)
I´ve read all the discussions and articles I couldn´t find anything conclusive.
Please, any clues?!
Thanks in advance,
Alex Berenguer

Hi Syed, thank you so much for your help. I have already spent many hours in order to solve this issue but nothing so far.
The Web Application I created to test it has a Business Intellicente Center as Site Collection. The Report Services features is running on it. I checked it. Thanks.
Follow more details I ´ve discovered:
Here's the scenario:
I have a Web Front End (WFE) server, and an Application Server (AS) in a Sharepoint 2010 Farm. The configuration database, content database, etc.. are located on a clustered SQL 2008 R2 instance on another set of machines. I have installed SQL
2008 R2 Reporting Services w SP1 on the AS. I have installed the SQL 2008 Reporting Services Add-In for Sharepoint 2010 on the WFE. I have gone through all the configuraiton settings, set the SPNs for the service accounts, etc... The Excel Services
with external data, for example, is working fine.
When the reporting services integration is set to "Trusted Account", I can deploy reports to the server with no problem, EXCEPT that I can't deploy data sources that use "Windows Authentication" as their credentials, which is desirable for our implementation.
When I switch the reporting services instance to "Windows Authentication", I can no longer deploy projects to the report server. When I go to deploy the reports, I continually get a "Reporting Services Login" prompt, showing the server it is being deployed
to, and requesting a username and password. No combination of username and password works.
Here's a fun little bit for you too, if I continue to try to login to the server, I will eventually (after hitting the GPO threshold) lock out my account from Active Directory. This I found out after nearly creating a set of tracks down my scalp all
day today trying to figure out what was happening to my sharepoint sites while I was debugging this....
So it seems that it is trying to authenticate my login credentials through BIDS, but is unable to do so.
Also, when I attempt to "Manage Datasource" directly through the Sharepoint interface I am getting 401 errors.
I appreciate any assistance.
Thanks a lot.
Alex Berenguer

Reports 11gR2 - The in-process Reports Server failed to start

Hello,
I recently installed the new Forms Reports 11gR2 on an Oracle Linux 5 update 6 64bit. Firstly, I installed the JDK1.6.29 64bit. Then, I installed the Weblogic Server 10.3.5 (jar version). Finally, I installed the Forms Reports 11gR2. After installation I reboot the machine. When it came up I manually started the Weblogic Server (10.3.5), the WLS_Forms, the WLS_Reports and OPMN. Everything looks fine except the in-process reports server.
I can access the page (http://apps8.orasys.gr:8888/reports/rwservlet) without any problems but when I try to access the showjobs (http://apps8.orasys.gr:8888/reports/rwservlet/showjobs?)
I get this message “REP-52266: The in-process Reports Server rep_wls_reports_apps8_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0”
The status of the In-process Reports Server is down. When I try to start it, it fails. This is what I get in the log files:
#SEARCH_CRITERIA
#     START_TIME: 2011-11-15T09:36:20.036+02:00
#     END_TIME: 2011-11-15T10:36:20.036+02:00
#     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
#SELECTED_TARGETS_LIST
#     /Farm_ClassicDomain/ClassicDomain/WLS_REPORTS/reports(11.1.2):oracle_repapp
[2011-11-15T10:06:53.414+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: Thread-34] [userId: <anonymous>] [ecid: 004gS5sBFOS0RtdePdaQPP00017Y00000O,1:27964] [probKey: 33] [APP: reports#11.1.2] [URI: /reports/rwservlet/showjobs] REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1 [[
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(String.java:1937)
     at oracle.reports.server.LDAPManager.createDirContext(LDAPManager.java:260)
     at oracle.reports.server.LDAPManager.createOIDContext(LDAPManager.java:176)
     at oracle.reports.server.RWSecurity.start(RWSecurity.java:122)
     at oracle.reports.server.SecurityHelper.start(SecurityHelper.java:107)
     at oracle.reports.server.RWServer.startServer(RWServer.java:985)
     at oracle.reports.server.RWServer.run(RWServer.java:358)
     at java.lang.Thread.run(Thread.java:662)
[2011-11-15T10:07:02.729+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 004gS5sBFOS0RtdePdaQPP00017Y00000O,0:1:0x5f5e102] [probKey: 34] [APP: reports#11.1.2] [URI: /reports/rwservlet/showjobs] ServerManager:getServer Bind to Reports Server rep_wls_reports_apps8_asinst_1 failed.
[2011-11-15T10:36:05.110+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: Thread-68] [userId: weblogic] [ecid: 9abaf3e65885e557:23d03fee:133a635b091:-8000-0000000000000296,0] [probKey: 35] [APP: reports#11.1.2] REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1 [[
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(String.java:1937)
     at oracle.reports.server.LDAPManager.createDirContext(LDAPManager.java:260)
     at oracle.reports.server.LDAPManager.createOIDContext(LDAPManager.java:176)
     at oracle.reports.server.RWSecurity.start(RWSecurity.java:122)
     at oracle.reports.server.SecurityHelper.start(SecurityHelper.java:107)
     at oracle.reports.server.RWServer.startServer(RWServer.java:985)
     at oracle.reports.server.RWServer.run(RWServer.java:358)
     at java.lang.Thread.run(Thread.java:662)
[2011-11-15T10:36:11.798+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 9abaf3e65885e557:23d03fee:133a635b091:-8000-0000000000000296,1:27966] [probKey: 36] [APP: reports#11.1.2] ServerManager:getServer Bind to Reports Server rep_wls_reports_apps8_asinst_1 failed.
#MESSAGE_COUNT: 4
Please help. I really need to evaluate version in order to move to it as soon as possible.
Thank you in advance,
Evris

Hi Evris,
REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1
Follow the below metalink id
Start Report Server Failed, Javalang String Indexoutof Boundexception Rep-50125 [ID 372362.1]
Hope this will be helpful,
Regards,
Fabian

Crystal runs sql command of first sub report in the second sub report ?

Similar Messages

Maybe you are looking for