Crytsal Reports 11 cannot connect to Visual Foxpro Database table
I hope someone can help me here. I have read through the other posts here, but can't seem to fiind the answer I need.
We use Crystal Reports to pull information from our Sage databases to create and distribute reports. Currently this is working fine on the original server. However, we decided to move the installation of Crystal Reports from one server to another.
In setting up the new server, I keep getting the message "The database table (table name) cannot be found. Proceed to remove this table from the report?" It displays this message for all the different tables in which data is trying to be accessed. Once I click No to all of these notifications, the correct info is poplulated in the report just fine. I need to get this corrected. It does not do this on the original installation.
Also if I open Database Expert and single click too expand the "Current Connections" folder, I get a message that pops up saying "Database Connector Error: 'HY010:[Microsoft][ODBC Visual Foxpro Driver] Function sequence error'". When I click OK to that, I get another similar error that reads "Database Connector Error: 'IM001:[Microsoft][ODBC Driver Manager] Driver does not support this function'"
Please let me know of any ideas that you may have as to what may be causing this issue. I have tried reinstalling the ODBC drivers, Runtime files, and Crystal. I appreciate any help.
I tried what you mentioned but it did not work. I believe it has to do with a "SQLNumResultCols" in SQL. The reason I say this is because I did a trace on both the server that is working and the server that is not and this is the first key that displayed an error in the SQL.LOG file. Here is this section of the SQL.LOG file for the server that isnt working...
dde 2e94-28b0 EXIT SQLNumResultCols with return code -1 (SQL_ERROR)
HSTMT 03442998
SWORD * 0x0012F3F4
DIAG [HY010] [Microsoft][ODBC Visual FoxPro Driver]Function sequence error (0)
And here is this section of the SQL.LOG file for the server that is working...
dde eb8-c94 EXIT SQLNumResultCols with return code 0 (SQL_SUCCESS)
HSTMT 03542508
SWORD * 0x0012F3F4 (5)
I believe if I can figure out what is causing this, I will be able to resolve this issue, but I am not a programmer and I am having a very hard time with this. Any help is appreciated.
Similar Messages
-
Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
passwordHi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”. Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
i. Click on the DPMReoprts_GUID to open the DPM reports.
ii. Click on the DPMReporterDataSource
iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
iv. tick "Use as Windows credentials when connecting to the data source."
v. Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
I want to connect Visual foxpro database through forms6i.
Hi ,
I want to connect Visual foxpro database through forms6i.
actually i want to access Visual foxpro database in forms6i and retrive and update data from forms6i.
please help me urgently how can i do this in forms6i.
Thanks,
Md.Muniruzzaman Khan
Email : [email protected]do the following steps for hetrogenous service
Step 1
Create ODBC named Access1.
Step 2
Go to urs inithsodbc.ora file which reside at
ORACLE_HOME\hs\admin\inithsodbc.ora
and overrite by
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = Access1
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
Step 3
Add the following entry to the tnsnames.ora file:
ACCESS1.WORLD =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
(CONNECT_DATA=(SID=ACCESS1))
(HS=OK)
Step 4
Add the following entry into the listener.ora file:
(SID_DESC=
(SID_NAME=ACCESS1)
(ORACLE_HOME=D:\Oracle)
---Define urs oracle home path in mine case it is at D:\Oracle--
(PROGRAM=hsodbc)
Step 5
Reload the listener from contol panel services yours listener service
Step 6
Create a database link using:
CREATE DATABASE LINK access1.world CONNECT TO "MyUser" IDENTIFIED BY "MyPassword" USING 'ACCESS1.WORLD';
Step 7
Connect to scott/tiger
Query the table using:
SELECT *
FROM [email protected];
Step 8
Same you can connect to urs forms and write above sql in cursor
Acknowledge me.
Khurram Siddiqui -
SharePoint 2007:Cannot connect to the configuration database.
The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors:
Log Name: Application
Source: Office Server Search
Date: 2015/2/28 22:30:47
Event ID: 10034
Task Category: Gatherer
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Office Server Search" />
<EventID Qualifiers="49152">10034</EventID>
<Level>2</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
<EventRecordID>2323514</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name: Application
Log Name: Application
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:30:50
Event ID: 5586
Task Category: Database
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="0">5586</EventID>
<Level>2</Level>
<Task>484</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
<EventRecordID>2323517</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>64</Data>
<Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:31:00
Event ID: 27745
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="14130">27745</EventID>
<Level>2</Level>
<Task>1105</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
<EventRecordID>2323520</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C) 0x08FC Search Server Common
GathererSql 0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common UtilCommon
0 Monitorable Dumping error record [0]: Source: Microsoft OLE DB Provider for SQL Server HRESULT: 0x80004005 Code: 11 Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Cannot connect to the configuration database
I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
"Cannot connect to the configuration database"
Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
" This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the HelpWas the active directory server that you removed the last active directory server in the farm? If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain. It may have lost its Domain membership when you removed
AD from it and gone back to being a standalone server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Cannot connect to the configuration database when App Server is down
Hi,
We had a App Server not come up after a restart.
When trying to access a site we get
the "Cannot connect to the configuration database"
We have now started the App Server and everything working again...
My problem, there are 2 WFE servers with NLB Configured apart of the App Server ....Why wont the site work and why cant i connect to config DB?
Something must be misconfigured? Sites should be connecting to the WFE servers and work if App server is down.
Yes, NLB Points to the WFE Servers.
Any ideas where i can look? This is a Project PWA Server, not sure if that will make a difference but the root SharePoint site had the same issue.
ThanksHi Danie,
is it possible that the SQL Server is running on the same box as the SharePoint (application) server? This would be the only thing that can explain the symptoms. Please check following:
IP address of the SharePoint Application server by typing nslookup AppServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
AppServerName with the FQDN of the application server, e.g. appserver.domain.local
IP address of the SQL server by typing nslookup SQLServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
SQLServerName with the FQDN of the SQL server, e.g. sqlserver.domain.local
SQL Server alias configuration by checking the entries in the cliconfg.exe on both SharePoint WFEs
In most cases, SQL server has nothing to do with the SharePoint Application server role and it is stored on the separate box. My guess here is that the farm started as one-server farm setup and over the time got expanded by additional 2 WFEs, moving
Web Server roles from the initial server, leaving it with the application role (service applications) and SQL server on the same box.
But, I am just making an educated guess here. Can you provide some additional information?
Hth,
Aleks -
Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mkHiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down) -
Cannot connect to the configuration database Error in HTTPS
Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
PrabakarHI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
DUPLICATE DB : ORA-17629: Cannot connect to the remote database server
[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database serverWelcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112 -
User with VPN Connections cannot connect to our Oracle Database
Hi Everyone,
I am facing a problem today with our Production Database.
User with our branches using VPN connection cannot connect to our Oracle Database.
As per checking the alert log, I saw this message
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 13-AUG-2013 13:08:42
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.100.131)(PORT=1137))
We are using Oracle 11gR2 Database running OEL 6
Kindly help us to solve this.
Thank youHi Dude,
My firewall is disable in my db host.
I also check the firewall on client end and it is also disabled.
I also talk to my Network Administrator for adjustment in Router and Firewall to allow port 1521 to accept connection but still unsuccessful.
What seems to be the problem ? -
How to connect to a foxpro database
im a newbie in java database connectivity. may i know how to establish a connection to a foxpro database using java. i am not sure of the codings needed
Have a look at the JDBC tutorial. That should get you started.
kind regards,
Jos -
The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.comUsing:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com -
** 911 ** Cannot connect to oracle 9i database No suitable Driver
All:
Any help rendered would be appreciated. (jdk 1.4.2_06, Tomcat 4.0,
Oracle DB 9i Windows XP)
I have a web app (Jasper report tool) and I cannot connect to a Oracle 9i database.
1)error received: "Apr 2, 2007 2:05:15 PM com.entDB.Enterprise_db connectToDatabase SEVERE: Function connectToDatabase() - Cannot load the driver, reason:java.sql.SQLException: No suitable driverCheck classpath for driver java.sql.SQLException: No suitable driver
2)CLASSPATH SETTING = C:\tomcat\common\lib\ojdbc14.jar
3)Source code:
protected boolean connectToDatabase() {
try {
// I tried this !!! Class.forName("oracle.jdbc.driver.OracleDriver");
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = DriverManager.getConnection("URL,USER,PASSWORD ");
return true;
}catch (SQLException e) {
logger.error("Function connectToDatabase() - Cannot load the driver, reason:" + e.toString() + "Check classpath for driver ", e);
return false;
4.I placed a copy of the jar file in TOMCAT common lib, and server lib.
I have tried various solutions listed at different web sites without success. Has anyone had similiar problems? Can anyone assist?
thanks ......
******* Confused *********I used 911 because It is an emergency for me (I am
under a deadline) . You might want to read this: Urgent Questions
URL, PASSWORD, USER are strings
declared in another section of code.Yes, but in the code you posted the variable names are all inside double quotes? -
Can oracle PLSQL program communicate to VFP (Visual Foxpro) Database.
Hello All,
I am using dataabse 9i in windows 2003 - 32 bit server.
I have couple of application in forms and Visual Foxpro(VFP). The VFP program can commucate to the oracle database.
when I am inserting/updating/deleting some data to the oracle database it should insert/update/delete the record in VFP database.
For this I have created triggers in the oracle tables so that when DML oreration are happening in the database it can triggered and same time the VFP tables can be updated by the oracle triggers. But my problem is I am not able to connect to the VFP table from the Oracle.
Any body have any idea on it, Please suggest.
Thanks,
SUNOracle has a facility called Heterogeneous Services. It uses odbc or ole to communicate to third party databases.
You need a Foxpro ODBC driver, and you need to set up several Net related files.
Please refer to http://download.oracle.com/docs/cd/B10501_01/server.920/a96544/gencon.htm#1656
Sybrand Bakker
Senior Oracle DBA -
Report cannot connect to OID server
Hi all ,
When I try test Report on Oracle Applaication
http://hercules.dati.lv:7785/reports/rwservlet/getserverinfo?server=rep_hercules&authid=portal/sys_new904
then get error message
REP-50200: Cannot connect to OID server.
URL http://hercules.dati.lv:7785/reports/rwservlet/
works fine.
Connect with sqlplus portal/sys_new904 to Infrasructure is ok also.
What a problem may be ?
We can't run any reports on iAS :(
We have iAS 10g on Solaris 8.
Thanks a lot,
Pavel.Hi,
let me start asking teh question if you need reports to conenct to OID. This is required when you want to authenticate users via SSO or when you use Reports access control security to protect Reports Servers and Reports definition files.
If the answer two both are NO, try
SINGLESIGNON=NO in rwservlet.properties located in ApplicationServerHome\reports\conf
and remove the elements
<security id="rwSec" class="oracle.reports.server.RWSecurity">
<!--property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/-->
<property name="oidEntity" ...
</security>
from the <Reports Srever name>.conf file
Restart the application server and you should be fine. I don't know why Reports Srever can't connect to OID, did you try and connect to DAS http://server:port/oiddas
If this fails too, then possibly the problem occured when configuring the OID access during the midtier installation
Frank
Maybe you are looking for
-
hi, i have a jsp that validates a login form and depending on the result of the validation, redirects the user to the main page (validation ok), or redirect the user to the login page with a querystring, like this: "response.sendRedirect("login.jsp?l
-
Hi, after operation 20 (say after cutting), the product need to be inspected by inspector using special machine, which will take atleast 3hrs time and then the product is passed to next operation. in this case shall we define this insp as one operati
-
How to add the fields to the transaction 'Z10SD25' using ABAP Query
Hello, I want to add the new fields like 'From' and 'To' depending on some conditiions. But i have to do this using ABAP Query. Can any one help me with this as I am not much aware of ABAP Query . Regards, Darshana
-
Can not load Crate and Barrel to save my life!
I found a post over on the Safari board that speaks to an identical problem I am having with Crate and Barrel and CB2. No solutions offered there yet. Would appreciate any help! I started trying to load the site on Sunday and thought it was their sit
-
Need to do a full restore but my backup drive is not recognized
My backup drive is not recognized by Migration Assistant nor on OS x 10.6.8 start up. Need a full restore via Time Machine. On startup with new drive, I initially selected to restore from Time Machine backup. It asked to connect the drive which I d