CS3 VB "Image color settings"

Hi,
Can anyone tell me where I can set the icc profile on an InDesign.Image object?  This would be like setting the "Profile" on indesigns "Image Color Settings" dialog.  I've found the rendering intent (ImageRenderingIntent), but not "Profile".
Thanks!

Actually now that I look at your problem a little closer, I think you need something different from what you're asking for.
You are importing a CMYK image with a 340 TIL. You mention you need it to be Document CMYK, which is a different GCR CMYK from the image. In such case it is good that the image has the profile imported with it.
Output using one of the PDF/X standards. Select "Convert to Destination" without the preserve numbers. Document CMYK.
Native InDesign colors will not be converted. The LCP MaxK 340 will be converted to your Document CMYK.
Bottom line: if the images need to be in the Document CMYK color space, and you want InDesign to get them there, they must undergo the conversion when you output the PDF.

Similar Messages

  • Image Color Settings Default

    Hi, I’m having a problem with color profiles. When importing images through bridge into one of my Indesign documents the Image color setting is defaulted to the color profile of my image that I am importing. When I start a new document the default setting is “Use Document Default”. You can access this setting by right clicking on an image box in Indesign and going to Graphics -> Image Color Settings.
    Why is the default import option for the color profile different for just that one document and how do I get it to always import with “Use Document Default”.
    This is causing problems when we send our file to press because we are using GCR on the images and not having “Use Document Default” set is separation problems.
    I’m running:
    Windows XP
    Creative Suite Cs3

    Actually now that I look at your problem a little closer, I think you need something different from what you're asking for.
    You are importing a CMYK image with a 340 TIL. You mention you need it to be Document CMYK, which is a different GCR CMYK from the image. In such case it is good that the image has the profile imported with it.
    Output using one of the PDF/X standards. Select "Convert to Destination" without the preserve numbers. Document CMYK.
    Native InDesign colors will not be converted. The LCP MaxK 340 will be converted to your Document CMYK.
    Bottom line: if the images need to be in the Document CMYK color space, and you want InDesign to get them there, they must undergo the conversion when you output the PDF.

  • CS3: "Your current color settings discard CMYK profiles..." warning!?!?

    Why am I getting this error?
    My file contains two CMYK colors, nothing else?
    Saved .ai WITH color profiles...
    Thanks,
    Kristin.
    "Your current color settings discard CMYK profiles in linked content but profiles were set to be honored when this document was created."

    actually, it means exactly what it says.
    When the document was created, whether by you on your machine, or by someone else on another machine, or the various possible permutations thereof, the document was initially saved with profiles of linked files set to be honored. Now you are working on it with your color settings set to discard profiles on linked files.
    If you don't have any linked files, this won't affect anything with this file.
    The way you have it set up now is generally the preferred way.
    If you want to get rid of the warning, copy everything out of this file and paste it into a new file. Work on the new file from here on out.
    Doing a "save as" might work, I've never tried that.

  • Color Settings CS3 Mac for CMYK Commercial Print

    Can somebody advise me as too what I should be setting my color settings to so they will be the same across the suite and when I send my files to commercial print that prints CMYK sheet fed coated.
    I've read so much I'm confused. I'm new to CS3 and the Mac ... In the past my work has come back perfect in color and matched to my monitor. Now on CS3 on the Mac I'm not sure what to do.
    If anyone can help it would be most appreciated.

    Charlene wrote:
    > Marco ... I read your post on rGB / CMYK conversion
    Which one was that, if you could remind me?
    >I work through a print broker that prints CMYK and the only thing he can tell me is that they print CMYK and on sheet fed coated.
    Well, yes, print is always CMYK. As for "sheetfed coated", I would assume that they intend a color space like the one described by the U.S. Sheetfed Coated v2 profile (though it could possibly be the GRACoL2006_Coated1v2 profile). You may want to ask them to confirm one or the other, to be safer.
    >So my question is di turn everything to CMYK on my monitor and change to sheet fed coated in the settings?
    To make sure I understand your question, I think you are asking me whether you should turn your image file(s) to a chosen CMYK output profile. Yes and no. You should do your color and tonal correction work
    b in RGB
    , and convert to the intended CMYK output profile
    b only as a last step
    , just before you deliver the files to the print provider or the prepress specialists.
    Do
    b not
    convert your files to the intended CMYK output profile in the beginning and correct them in CMYK. Do not do that. That is not the most desirable way to work.
    The default working spaces in Photoshop's Color Settings are important, but not essential. Yes, you should set the default RGB profile to AdobeRGB (if not ProPhoto RGB, though you may wish to hold off on that one until you have more experience with the application), and the CMYK default profile to U.S. Sheetfed Coated v2.
    But, as long as your chosen color management policies are to "Preserve Embedded Profiles", and as long as the image files you work on are tagged with the appropriate profile, then the default profile in Color Settings is no longer relevant.

  • Color Settings Images are too warm and light while editing

    Can someone help me understand color settings in Photoshop. My images look much lighter and warmer when I edit them than when I export them using Save for Web.
    For a while I though it was because I was importing a raw file with a different color depth and profile so when it got saved as a jpg that the colors and brightness would shift. Recently, I made a graphic in Photoshop and it still looked warmer than the export. I also know temperature is displayed wrong in photoshop because when I create a neutral gray color its too warm. When it's exported using save for web the temperature is shown correctly.
    If it was a mis calibrated monitor it would look warm all of the time. I'm using Photoshop CS3, my color profile is sRGB with color management turned off (its off because espon recommends this setting because it can better manage colors). Although I tried changing these settings and they don't seem to make a difference. Here's neutral gray image with screen caps to show you what I'm talking about.
    http://i14.photobucket.com/albums/a317/pcofran/test/photoshop-color.jpg

    Calibration tools calibrate your monitor to produce colors on screen that will look proper given your room lighting. Think of calibration as being a very precise, accurate adjustment to the contrast, brightness, and RGB controls of your monitor. Obviously, if these controls are set differently, your images will view differently. Calibration results in the monitor being set properly for display of images at a known gamma. You can get fairly good, but not totally accurate, calibration visually, without a colorimeter, using appropriate software tools.
    Calibration tools also produce a profile that allows color managed software, such as Photoshop, to adjust its output for very precise reproduction within the gamut of your display. Again, there are some tools that produce a profile visually, but you get better results with a colorimeter.
    Why should this be necessary? You want to display your images with the intended colors. You also want the proper colors to be sent to your printer or the files on your website. If your monitor isn't properly calibrated and profiled, pixels from the image file that are, say, light gray (RGB 200,200,200) might appear as middle gray, near-white, or even tinged with red or blue. If you adjust the colors in the image file so it displays the way you want it, the pixels in the file will no longer be light gray and will display as something else entirely on a different monitor, when printed, or when viewed at a website.

  • ID CS3 - Cannot change image color (imported using "Place")

    Hello. I'm using ID CS3, Windows XP, SP3.
    I am new to ID CS3, coming from PageMaker 6.5, and when I converted one of our brochures, everything looked great. In fact, we have some images that are tif's (I think this means it's a bitmap). The images are black and white (they are apples). Our print process is Black and a Spot Color, so the apple images are the spot color.
    The converted PageMaker6.5 apples are great, they are the spot color, and when I change the spot color, they change too. If I add a new apple image through the Place command, even the exact same file, it imports as black and white, not with the spot color. In PageMaker6.5, this is how it worked, and then I would select the image and then select the spot color. In CS3, when I select the image, and select the color, it either colors the stroke or fill. Obviously I don't want the stroke, and the fill doesn't affect the apple, only the white behind the apple, so I end up with a still black apple on a colored background in the rest of the frame.
    What I want is:
    Background: Paper or None
    Apple: Spot Color (at this point, any color would be fine)
    I have tried applying styles, object/character/paragraph, I have tried the Object->Image Color Setting as found on Adobe help area, except this option is grayed out. I have tried Place, and while selecting the file, selecting "Show Import Options" but it grays out all options when the pop-up box appears. I can't figure out what else to do.
    Also, I can't change the PageMaker6.5 apples to any other color, they are stuck on spot color.
    The problem seems to be I am not targeting the black part of the image itself, yet I can not figure out how to do so. The images are made in Photoshop 6. Thank you for any help you can give (I also have an import jpg file, which has the exact problem of any color changes are to the white background (fill) or the stroke. But again I am unable to change the black part of the image).

    Thanks, in an odd way it worked...
    I dragged like you said. The entire frame became the Spot Color (meaning I could no longer see anything but a large solid block of Green). So I went to Edit->Undo, and it undid the large solid block of green, leaving the previously black image now green, exactly what I wanted. While I don't understand why the Undo command fixed it, I'm happy with the results.
    Thanks.
    Edit - I did it again to another apple, this time it worked perfectly without the undo command. The first time, my cursor became a hand. The second time, it stayed an arrow with a small block under it. Regardless of what happened the first time, thanks again.

  • Color Settings: Getting colors in PS CC to match colors of the image when used as a Windows Background

    or vice versa. I probably do not know enough to be able to ask the question properly.
    The colors of photos in PS CC are not the same when used as a desktop background in Windows 7. The colors are somewhat more saturated when as a background on the desktop and while not totally unusable, it would be nice to have matching color between my PS editing screen and the photo as viewed as a desktop background.
    The following are some conditions that may or may not be relevant to the answer of my following question.
    1.) I am a complete novice to Color Management so a presumption of knowledge and the heavy use of jargon may not penetrate my head.
    2.) I shoot with sRGB embedded in my photos.
    3.) My RAW conversions use sRGB IEC61966 - 2.1.
    4.) My PS Color Settings are North American General Purpose 2 with sRGB IEC61966 - 2.1 as the working space and Intent as Relative Colormetric
    5.) In the Win 7 Control Panel>Color Management>Device, my Device = NEC LCD2690wuxi, ICC Profile = NEC LCD2690wuxi (default), file name = nl269wui.icm
    6.) In the Win 7 Control Panel>Color Management>Advanced, Device profile = System Default sRGB IEC61966 - 2.1 and (everything else set to System Defaults too). The only difference from the PS Color Settings being that Windows is defaulted to Perceptual Intent, but a change in either PS or Win 7 has no effect on the relative color differences.
    7.) The monitor is set to the Native internal preset, but the relative differences in color remain the same even if the monitor is changed to sRGB, or any other internal preset.
    8.) I have Proof Setup set to Monitor RGB but none of the settings will match the Win 7 Background color.
    Now, my question is this. How would you set up your color settings/profile in PS and/or Windows to match color between PS and the Windows desktop of Windows 7?

    Nevermind. I didn't have Proof Colors checked.

  • Grayscale Images Colorized in InDesign Don't Print Properly

    Hi, we're having trouble getting proper color output when we colorize grayscale TIF files in InDesign CS3.
    We have just a couple basic grayscale TIF files, no transparency, saved with or without embedded profiles (Dot Gain 20%).
    We add a foreground and background color to these in InDesign using process colors (no spots). These colors should, and need to, match a couple large swatches of these colors elsewhere on the document.
    When we check the colors using Separations Preview, the numbers on the light and dark parts of the image are identical to the process colors they should be. They look correct on screen (with or without Overprint Preview).
    We usually print using 'Postscript Printer Determines Color' and let our RIP determine color settings (we have a Doc12 w/ Splash RIP). We tried many different settings on the RIP, no luck. We also tried printing using 'Let InDesign Determine Colors'. No luck. The colors are just slightly off. (ie - 0, 30, 100, 0 looks almost like pure yellow, much brighter).
    If I export to a PDF and print, it looks correct. If I make a CMYK version of the photo in Photoshop and use a gradient map to apply the same colors, it prints correctly.
    - ANY IDEAS???
    Thanks a lot.

    I am also having problems.  Upgraded to Acrobat DC.  I use a Mac (latest software)
    When I export from InDesign CC to Acrobat DC the interactive elements - especially buttons - go cranky.  I get a strange smudgy kind of drop shadow but in a variety of colours behind the arrows, buttons etc.  All very strange.  It gets worse if I apply a drop shadow and bevel and emboss to the button (even a home made button rather than one of the sample buttons).
    I'm currently working away from home and so can't try any other computer.
    Strange.
    Richard

  • Cannot apply any color settings to RAWs from CompactFlash card

    Usually we shoot tethered around here, but i had to shoot to card yesterday and was having no luck using Bridge and ACR to apply color settings to my files. I would open a .MOS file in ACR from Bridge and change its color balance and/or exposure, etc. and click DONE and nothing would happen in Bridge. It would make an XML file that sat alongside it in the folder, but Bridge would not recognize these changes. There preview and the thumb would stay the same, and i wouldn't get that little circle icon with the arrows in it next to the thumb in Bridge.
    Changing preview types, thumbnail types, auto-exporting cache, purging cache from Tools menu, reapairing permissions, changing parent folder permissions, restarting my Mac, dump Bridge's preferences etc. nothing worked. i even tried the same images on a different Mac with CS3 and Bridge and got the same results. If i made a New Camera Raw Default, that WOULD work, but i could not make specific single-image changes.
    BUT, somehow as i was pulling my hair out, i found a fix. Going to the Finder, i Got Info on the RAW file, went to the Open With popup, found Adobe Photoshop CS3 again (even though it was already highlighted), clicked ADD, and closed the Info window. Instantly that file's Thumbnail in Bridge got rebuilt and now my color changes would stick.
    Every file that comes off these cards needs that done to it, but never when we shoot tethered to the computer. Weird. I'm not sure if it's specific to the Digital back or not.
    This was using a Leaf Aptus 75S mounted to a Mamiya RZ67 shooting to SanDisk 4GB Compact Flash cards. I'm running a G5 tower using OSX 10.4.11, Bridge 2.1.1.9, and ACR 4.4.1.
    Any ideas?

    answered in another forum

  • Illustrators color settings

    Let me start by saying that I don't want anyone to tell me to sync my color setting with bridge to fix this problem.  I only want to address a specific issue with Illustrators color settings.
    In my workflow I embed a custom color profile to my images only, so I do this in Photoshop. when I have an image placed in Illustrator I tell Illustrator to ignore the embedded profile.
    In color settings, I have color management turned off for RGB files, if I have the box checked to warn me if I have a profile mismatch I get a warning that asks if I want to use the embedded profile or ignore it. Illustrator defaults to have the profile embedded, which is not want I want to do, so if I uncheck the box to warn me if I have a profile mismatch, it automatically uses the embedded profile, even though in the color settings it says color management is turned off.
    I would like to understand what the logic is here. If I print a tif file with my profile embedded it looks great, if I place this same image into Illustrator and print it looks differnt and bad. If I don't have the warning box checked and it is supposedly embedding this profile in Illustrator what is it actually doing? because it does not look like the photoshop tif, it looks flat and desaturated when printed.
    I asked about this a while ago and never got an answer, but recently I think it was when I was loading CS4 I lost all my settings in my CS3 applications, and now I can't get the warning window to stick to the option on the bottom, and before I had gotten it to stick, so now my brain is used to looking at the warning but not having to change it to what I want.  I just keep wondering why when I tell Illustrator to not color manage it still does if I don't have the warning checked, but if I do have it checked it gives me this option.
    I've tested this in CS4 and it does the same thing.
    Maari

    John,
    Yes to all of the questions or points you made! except the part about not being able to use the profile at the source file.  I am working in a closed loop, and one of the things we do is large format photographic printng, we feel we get better results keeping everything in RGB color for this output.  My understanding is that the profile is embedded and there is no way for any other other application to change that. As you said it would be interesting for someone else to chime in.
    Here's the thing, I think this is a bug. I finally figured out how to get the warning window to show the correct option (to discard the profile) - if I change the color settings to the option "color management off" all of the settings we want appear, and it defaults to have the warning box checked, then when you open a file that has the differnt profile, the option to discard the profile is selected. Then if you go back and un-check the warning box, and still all the same settings everywhere else, it still chooses the correct option - to discard the profile. If I then go and change the color settings to some other option "north american....." and open a file.... then close.... then go back and just select the same options that match the color management options except now I did them manually so it says custom, it chooses to use the embedded color profile if I have the warning checked the option at the top is selected and if I have the box unchecked it uses this option.
    This is the part that I think is a bug, and furthermore I would like to know what it is doing, it does something horrid to the color when it says it's using the embedded profile, when I tell it to not use the profile, it matches the tif printed with the profile embedded, and if I change the profile on the tiff and print it this changes the color as well so I know the profile is changing the color at final output.
    Anyways my main frustration was that I had figured all this out when we first got CS3 and I do keep the warning box checked, but I have gotten used to not having to change the option, but just look at it to see the correct thing is selected, then when I lost my settings the other day, I had forgotten how I had arrived at getting everything correct in this round about way, I was half way through opening a bunch of files and realized that the wrong option was selected....just wondering why it would behave this way.
    Thanks for you input!
    Maari

  • Help! Can anyone offer any advice re color settings?

    Hi all, I just don't know where to begin! Take a look at the screenshots attached.
    The two images look completely different. Photoshop CS5 renders the image entirely differently. I now notice that in my old copy of CS3 the image renders way closer to what I see in ACDSee AND in Lightroom. I have NEVER managed to even begin to understand this stuff. There's the monitors, the computer, Photoshop, Lightroom and ACDSee and they all have to interract with one another and... help! Is ACDSee almost accurate? How can I make CS5 look like the images I see in Lightroom and ACDSee? Should I? Then there's the printer I use online to consider. HELP! Can anyone offer any help? All the options under color settings both on CS3 and CS5 are identical and I even tried saving the ones from CS3 and loading them into CS5, just in case, to no avail.
    Can anyone offer any help? I also uploaded screenshots of the different settings in ACDSee and in CS5 and CS3 in case that helps. Is it something to do with the Proof Setup settings? They are both set to Working CMYK. Oh, my aching head!
    Thanks a lot for any help anyone can offer!
    Phil

    Thanks. I think I DO understand the basics of color management. I have attempted to callibrate my monitors many times and even paid someone to do it once all to no avail. I end up with washed out renderings which are different on each of my monitors and look NOTHING like the prints I get. All I'm trying to ascertain is why CS5 would render so entirely differently than ACDSee, Lightroom and even CS3. Even XPlorer2 agrees with everything other than CS5! And yet all the settings in CS5 SEEM to be the same as in CS3 so what else could be causing the washed out look? I'm also noticing CS5 is sometimes showing things marginally out of focus compared to other apps but I won't even get ionto that!
    Thanks, and if anyone else has any thoughts on why this would be I'd appreciate it.
    Phil

  • Dual monitor color settings seems to be messed up cs4

    Hi
    My daughter has this setup
    AMD 9550 quad 2.2mhz machine, Windows 7 ultimate. latest updates
    ATI Radeon HD 5700 gpu card (latest driver)
    Two LCD monitors
              1. LG 2361V HDMI (main)
              2. Cintiq 21UX (Extended)
    Both monitors are calibrated, and have the latest driver updates. It does not matter which monitor is the main one.
    PS cs4 also has the
    1. If i load a photo in fireworks and drag the application back and forth accross the two monitors, the image looks virtually identical.
    2. If i load the same photo in PS (cs4 11.0.1) and do the same, the image looks perfect in the LG but immediately darkens when on the Cintiq.
              a. The darkening is not instantanious. It looks good for about one second before it changes.
              b. If I hover the image between the two monitors, then the darkening only is applied to half of the image.
    3. If i change the preferences to not "color match" (in the performance->open GL) then the image does not darken and it remains loyal to the color profile in place. But!!!! the navigator and color selection tools remain darkened while on the Cintiq. So if she chooses a color from the tool, it paints a different color on the canvas.
              a. If I modify the color settings, then the modification affects both monitors display and the difference issue does not go away.
    Ideally we want to be able to select a color from the palette and have that color be what is painted onto the canvas. We also want the image to appear as similar as they do in fireworks.
    While Color Matching is checked:
    On the cheaper monitor, the image and the navigation pane always has the same color appearance. when i change the color profile, the change is reflected in both the canvas and the navigation pane.
    The same is true on the Centiq, but the image and navigation pane is always darker than on the other monitor.
    While Color Matching is UNchecked:
    The color selection tool and the navigation panel are affected but the canvas is not. But the two monitors canvases match.
    So. in order for the navigation and color selction tool to match the canvas, the color matching needs to be checked.
    But this creates the darkening on the cintiq. No matter what profile i choose, the cintiq is too dark. and photoshop is doing it because fireworks does not do this.
    How can i set it up so that all the colors are true to the profile, and match the nav and color tools?
    Thank you
    Any ideas will be appreciated.
    Jerry C

    Thanks
    @Noel
    It sounds as if the monitors are using two quite different profiles, which may indicate the calibration is off a good bit on one of them and the profile was generated to compensate.  The clue here is that you see a change when you move a document from one to the other, and that temporarily (while an image crosses both monitors) you see quite a difference in it.
    If you drag an image in a non-color-managed application across both monitors, so that specifically part of it is shown on one and part on the other, how different do they look?
    Using fireworks or MSpaint or IExplore, an image looks pretty much exactly the same on either monitor as well as when spanning accross both.
    The two monitors are clibrated so that all colors match on both monitors.
    http://www.lagom.nl/lcd-test/
    The Cintiq has a better contrast ratio so the whites are slightly brighter.
    But!!!  If the moitors were not calibrated, then a fireworks image would look different on each screen. In fact they look exactly the same on both.
    Even when the image spans accross the two screens.
    It is only Photoshop that darkens the part of the image that hangs onto the Cintiq. And it is very dark.
    Even in the famed "Monitor mode", the image is much darker than is is in IIE or MSPaint or Fireworks.
    I dont want to disable the color profiling, as it is important to see what the target will look like.
    But i do want to see what the target will look like! right now it is way to dark. No matter what profile i choose.
    Also my examples are more to demonstrate the comparrison between the two monitors, but the goal is to get PS CS4 to work on the centiq. It would be nice to have the navigator and some panels on the other monitor and have the colors match, but more important is to have the colors on the cintiq look normal at all!
    Thanks so far. but we are still messed up.
    Jerry C

  • I'm having a hard time understanding the best way I should have my color settings, set. Can I get someone's help with this?

    I am scanning old photographs with an Epson V750 Pro and have a question on how my Photoshop should be set, or how the scanner should be set.
    I have Photoshop 7.0 and it works fine, but I have started scanning some old photographs with my new Epson V750 Pro scanner and every time I go to open a scanned photograph, I receive a message reading:
    My Photoshop's color setting are "custom" set: I never changed anything, but this is how I've always ued it and have never had any problem before. Is there a better way it should be set?
    Right now these are the Color Settings:
    Should any of these settings be different? If something in Photoshop should be changed, what should I do? I don't want to be asked this every time I open a scanned image.
    Or, should any of the settings in the Epson Scanner when scanning?
    Right now:
    The other color settings available are 48-bit Color and Color Smoothing, but sometimes when I use the 48-bit Color, Photoshop will give me an error when I go to save the edited scan, telling me there isn't enough space to save it. I have no idea why this happens because there is plenty of space, but I end up having to change the scan to 300dpi to save it.
    Well, I don't know if any of this makes since, but I would love to receive any help. I would like to understand why I am having this problem and how the color settings should be, so I don't have this trouble anymore.
    Thanks,
    Sean

    In Epson Scan, click Configuation at the bottom of the main window, and try these settings.
    If it doesn't work, I think it'll  be ok converting to sRGB in Photoshop,
    Edit: You can set PS to convert to sRGB automatically under Color Settings > Color Management  Policies > RGB.
    But if you can control it from Epson Scan, that's probably preferrable.

  • Image Colors Change in Bridge Preview Window

    I edited some images first in Camera Raw and then Photoshop (CS5), all working in sRGB color space, and saved them as JPEGs.  If I select one of these images in the Bridge content pane, minimize the Bridge window, then maximize the Bridge window, the image appears correctly in the Bridge content pane but the colors are incorrect in the Bridge preview pane.  If I resize the view in the content pane, the image colors in the preview pane get corrected within a couple seconds.  Likewise, if I click on another image and then back, the image colors are correct in the preview pane, but if I again minimize then maximize the Bridge window, the image colors in the preview pane are incorrect again.
    Windows Explorer displays the image colors correctly.  ZoomBrowserEX (browser software provided with Canon camera) displays the same image (same file) with incorrect colors.  When I upload these JPEGs to my web photohosting site (PictureTrail), the images appear there with incorrect colors.  That is where this issue becomes most problematic because with the colors being off, the images are useless for posting to online forums or classifieds.
    It seems that the color in the JPEG is being read differently by different software, and is even being read differently under different circumstances within Photoshop (Bridge).  Is there a setting somewhere that I need to change?  Or some other issue?  Thanks.....

    I have a fair understanding of color profiles and color management.  My monitor is a Dell UltraSharp U3011 set to the factory-calibrated sRGB display mode.
    What makes me certain that this is not a simple matter of different color management in different applications is that Bridge is displaying the same JPEG file/image in two panes on the screen simultaneously and the colors do not match.  Furthermore, the incorrect colors in the preview pane image change to the correct colors if I resize the thumbnails in the content pane, or click on another image and then back; and the colors in the preview pane go back to incorrect if I minimize then maximize the Bridge window.  Seems to me that there must be something within that JPEG that is being interpreted differently in different circumstances that results in the "two versions" displayed within the same application (Bridge) on the same screen at the same time, and that other apps are interpreting one way or the other.
    Message was edited by: BoaMorph1
    Exploring a bit further, I've realized that the same color display issue exists with the original JPEGs from my camera (Canon T1i, shooting in sRGB color space).  So it seems the issue did not originate with settings etc. in Photoshop.... but Photoshop (Bridge) IS displaying "two versions" on same screen at same time, and so must be doing something different with the JPEG info in one pane vs. the other.

  • Aperture 3.1.1 ignores color settings in Canon 7D .CR2 Raw files

    hi there!
    i have a problem with the import of pictures taken with my canon 7d.
    when i take pictures using color presets e.g. black/white, aperture ignores those completely during import. even if i open them in preview.app the settings are not applied. if i open the same picture in photoshop cs4 it will be displayed correctly in b/w.
    neither the updated of the raw processing (http://support.apple.com/kb/HT3946) nor the 3.6 raw update solved this problem for me.
    how can i fix this?
    thanks,
    paul

    hmm, this behaviour of aperture is a bit odd.
    i understand the approach but if i shot a few thousand images on a journey, i don't remember afterwards, which image was supposed to be b/w. this leads to a situation where i +have to post-process+ images. i would expect aperture asking me if i want to keep attached color settings instead of ignoring them!
    and, yes, i'm sure that this image is a raw. photoshop interprets the color settings correctly.

Maybe you are looking for