CS5 Error: Updating the cache for items within the folder recursively

I have another odd issue and have no clue to what would resolve this.
I'm on Mac OS X 10.6.8. Bridge CS5
I've been getting the same message when creating a new folder. However when I create a new folder in my Finder window, it creates the folder immediately and reflects as such in bridge.
I can cope with creating folders this way. But it becomes a pest when I forget to do it.
One thing is, the only time this happens is when using our server. But this has not always been the case.
This thread below also has the same issue and wasn't resolved:
     http://forums.adobe.com/thread/994281?start=0&tstart=0

BEA Marcom wrote:
One thing is, the only time this happens is when using our server. But this has not always been the case.
I suspect it has to do with server issue.  Some have found they had a 10 sec or more delay and that if the server is pointed to Favorites Bridge wants to cache all the files on the server.  May be something like that.   

Similar Messages

  • I am trying to update a number of items which the software check brings up:      It runs and says it is installing but at the end I get this error message:    The update could not be expanded, and may have been corrupted during downloading. The update wil

    Hi,
    I am trying to update a number of items which the software check brings up:
    It runs and says it is installing but at the end I get this error message:
    BUT then I ge tthis:
    Can anyone help me to enable the software to update?
    Thanks

    Thanks.  Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
    Think will have to take it into the store.....
    thanks for replying.

  • How to clear cache for items after submitting the page ?

    db11gxe , apex 4.0 , firefox 24 ,
    hi all ,
    i have a non enterable pop-up lov and a report in the same page , and i search with the pop-up item , but the problem is when i click the search button ,
    the value in the pop-up is not deleted , and sure i want it cleared after i search ? how to do so ?
    thanks

    Surely, when you click the search button, the value in your item is required by the report (as a parameter).
    Create a button (RESET) with a branch back to the same page and use the clear cache in the branch
    Gus

  • Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

    We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
    I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
        get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
    One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
        http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
        "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
    tests using troubleshooting scripts find no issues with search indexer,
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
        Get-EventLog : No matches found
        At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
        + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
        -eq $msftesqlCrashEventId}
            + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
            + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
        Name IsDeadLocked CatalogStatusArray
        SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
    and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
        Server Database ServerGuid ResultFound SearchTimeInSeconds Error
        SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
    I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
    We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
    Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
    same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

    Hi IAMChrisL,
    Any updates?
    Frank Wang
    TechNet Community Support

  • Clear Cache for Items

    Hello again,
    i`ve made simple process with type "Clear Cache for Items (ITEM,ITEM,ITEM)" and with process point "On Load - Before Header" through wizard, in "Process" field i`ve inserted all items what i want to be clear on page load(from list below). When i run my page, error is:
    Error ERR-1002 Unable to find item ID for item "P12_BIT " in application "123".
    OK
    Unexpected error, unable to find item name at application or page level.
    but, item P12_BIT exists!! and it`s type is "radiogroup", such error is on all items that is in process.
    in another app this process works good.. Maybe error is because app 123 i`ve imported?? How can i solve it??
    Thanks for help anyway!!

    Jelena,
    In the message:
    Error ERR-1002 Unable to find item ID for item "P12_BIT " in application "123".
    I see some whitespace after the item name. Looks like we're not preparing that string as well as we should. Please try removing whitespace from the comma-delimited list of item names in the process definition and let us know if that doesn't work.
    Thanks for pointing this out.
    -Scott

  • Clear cache for items not working with multiple items

    APEX 4.0, 11g. I've made a session state process that clears cache for items (item_1, item_2, item_3) but I keep getting an error "Unexpected error, unable to find item name at application or page level" I have now created 3 session state processes, each with one page item in it, and it works fine but as soon as I try to put more than one item in the process field, separated by commas, I get this error. Is there some other setting I have to change to make it accept multiple values in this field?

    No, I wasn't using the parenthesis... just the items separated by a comma.
    I don't want to clear the cache for all page items, just these 3. It works okay in 3 separate clear cache for item processes, just thought it was odd that I can't put all three items into one process separated by commas.

  • The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

    I am looking at an issue with users not getting specific group policies. 
    After searching a number of client computers I found that the following error
    The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
    I can find the folder in the Sysvol folder on all of the domain controllers. 
    The issue with end users seems to be that the proxy settings for internet explorer is not being applied. 
    Potential problems?
    one folder in sysvol entry is empty 
    \\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
    or is this our issue
    The old method of configuring proxy settings  to Internet Explorer 9 has changed?
    https://support2.microsoft.com/kb/2530309?wa=wsignin1.0 
    http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

    Hi all 
    In administering this policy I am a little confused. 
    We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
    I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

  • Parameter REPORT for the Report Web item in the Web template is empty or mi

    Hello,
    I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
    Web Item Report Error
    Web template error in specifications for the Web item report
    Parameter REPORT for the Report Web item in the Web template is empty or missing
    Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
    Contact your system administrator. This error was recorded
    What can I do to solve this error?
    Thanks!
    XmchX

    As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
    The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
    Thanks!
    XmchX

  • ERROR: No control line for item 000010 in invoice document.

    Hi,
    Here, in VF02, when I try to release the document to accounting, system is giving following error.
    ERROR: No control line for item 000010 in document 852660. (where 852660 is invoice number)
    Please guide.
    Thanks in advance.

    Hi Chetan
    you will have to check whether have the Account Assignment Group been input in the Customer Master (Billing tabstrips - Accounting sections - Field name: Acct assgmt group).
    The Account Assignment Group will be copied automatically into the sales order.
    Check whether the configuration in transaction VKOA have been done correctly.
    Check whether the sales order (VA03 - Goto - Header - Financial Accounting - Field name: AcctAssgGr) have been filled in automatically.
    Check whether the billing document (VF03 - Goto - Header - Header - Field name: AcctAssgGr) have been filled in automatically.
    If the customer master have not been maintained and the user have already input the sales order, then the user will have to maintained the Account Assignment Group manually either in the sales order or the billing documents.
    Take note for One Time Customer, the user have to input the Account Assignment Group manually into the sales order.  One Time Customer can be used by many customer, therefore, the system will not be able to determine the Account Assignment Group manually.
    Hope it will help  u
    Regards

  • Error in account assignment for item

    Hello,
    We have configured EBP at Stack 03 in SRM release 550
    We are facing problem to create shopping cart,
    Already it was working fine but now at the time of adding item to shopping cart it shows below error
    messages
    1.Version 0 is not defined for fiscal year 2007
    2.Error in account assignment for item
    For your reference error screen is given in attached document.
    pls advise
    Regards,
    Santosh

    Hi Christophe,
    I am getting the same error <b>'Version 0 is not defined for fiscal year 2007'</b> when tried to create a Sales Order in IDES system and I am trying the solution to add the fiscal year 2007 in T.code OKEV but it fails.
    The steps what I have done :
    1. Go to OKEV
    2. Selecting control area 1000
    3. Selecting the version 0 line
    4. then trying to open the Settings for Each fiscal year from Dialog Structure
    The error i get is :
    <b>E: Activation of the indicator is not permitted</b>
    and the highlighted line in red is for Version 1
    The default indicator is set for version 1 is Plan, WIP/RA, Variance & Legal Valuation (Valuation view)
    I tried in many ways to 'uncheck' the boxes for this version 1 but fails.
    Pls help.
    regds,
    Umesh

  • After downloading the latest update IOS.8, for my IPad the Backup

    After downloading the latest update, IOS.8 , for my IPad the Backup  and Storage option under settings is no longer there

    The iCloud backup option has moved - it's now Settings > iCloud > Backup (it's towards the bottom of the list of items to back e.g. photos, mail, contacts, calendars ...  Backup, Keychain, Find My iPad).
    The storage option is Settings > iCloud > Storage (above the list of items to back up)

  • ERROR : Object could not be scheduled within the specified time interval

    I have the next error Object could not be scheduled within the specified time interval.
    When i schedule a report to be refreshed and the moment come when the report have to be refresh appear the error.
    i check the error in the following path in the CMC
    HOME> FOLDERS > USER FOLDERS > ... > "REPORT FOLDER"  Instance Properties
    Why i get this error?
    Anyone can give me a good solution to solve this error?
    Thanks!!!

    Hi Ed,
    The above error message is appearing due to the reason, when a large number of requests are scheduled to start at the same time, this may exceed the Maximum Number of Simultanius Requests that the deployment can support.
    To resolve this error message, increase the end time on the scheduled instance. To increase the end time, use the following steps:
    1. In the Infoview, browse to the desired report and click 'History'.
    2. Find the desired scheduled instance and click 'Reschedule'.
    3. Under the 'When' section, increase the end time for the scheduled instance.
    Upon completing these steps, the error message no longer appears.
    Hope it will help in resolving the error.
    Regards,
    Ritesh Nayyar

  • Can't download music from PC to IPhone 5. Error message says "Cannot copy item. The device has either stopped responding or has been disconected. Help?

    Can't download music from PC to IPhone 5. Error message says "Cannot copy item. The device has either stopped responding or has been disconected. But the phone is connected. Help!!

    Hello iyurdin,
    We've an article that can help keep your iPhone connected in Windows' eyes.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Cheers,
    Allen

  • How user can get a Sales Text for the any Line Item in the Billing?

    Salute Masters ! !
    How user can get a Sales Text for the any Line Item in the Billing?
    It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
    Where I can configure in system for all.
    Rgds
    Srivastav
    09973504950

    Hi,
    Sales text can be copied from customer to order , order to delivery and delivery to billing .
    Check the T-code : VOTXN , do the customization as per your requirement.
    check the below link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

  • So are we to assume that the preview for developers is the WP 8.1 update intended for Lumia Icon users?  Why is it taking so long for this update to be released?!

    Of those of you that have tried out the preview for developers on the Lumia Icon, what issues have you seen from it?  Does it in fact void your warranty?

    yleetsbob wrote:
    I have largely given up on this device, I think that I made mistake trying out a Windows phone.  I really miss my Android device and feel like I have made a 2 year mistake.
    I don't think you should give up on Windows Phone.  I think you should instead give up on Verizon.  Lets say you had an android device, Verizon could do the same thing and hold up an important update that you're waiting for.  AT&T is much quicker to release Windows Phone updates so you may want to try them next time.For example, you can see on this page Availability in North America - Nokia that AT&T has released the update for their top two phones the 1020 and 1520.  The Verizon icon is almost the same as the Lumia 930 which is the international version.  The 930 has been on Windows Phone 8.1 for many months.  Windows Phone 8.1 has lots of new features including the notification center and Cortana.  It's a shame that Verizon is too lazy, too slow or just doesn't care.  I'm probably going to start installing the developer preview soon and you could do the same.  Basically, you sign up for a free developer account.  Then install the developer preview app to get the updates. Google has no such option for android uses so if Verizon were holding back an android update you'd be worse off.  At least Microsoft gives us a stupid carrier work around...  It's annoying but then you can enjoy your Windows Phone with out having to wait for Verizon whom doesn't care.  They haven't even said a word about it which = worst carrier ever in my opinion.

Maybe you are looking for