ERROR: No control line for item 000010 in invoice document.

Hi,
Here, in VF02, when I try to release the document to accounting, system is giving following error.
ERROR: No control line for item 000010 in document 852660. (where 852660 is invoice number)
Please guide.
Thanks in advance.

Hi Chetan
you will have to check whether have the Account Assignment Group been input in the Customer Master (Billing tabstrips - Accounting sections - Field name: Acct assgmt group).
The Account Assignment Group will be copied automatically into the sales order.
Check whether the configuration in transaction VKOA have been done correctly.
Check whether the sales order (VA03 - Goto - Header - Financial Accounting - Field name: AcctAssgGr) have been filled in automatically.
Check whether the billing document (VF03 - Goto - Header - Header - Field name: AcctAssgGr) have been filled in automatically.
If the customer master have not been maintained and the user have already input the sales order, then the user will have to maintained the Account Assignment Group manually either in the sales order or the billing documents.
Take note for One Time Customer, the user have to input the Account Assignment Group manually into the sales order.  One Time Customer can be used by many customer, therefore, the system will not be able to determine the Account Assignment Group manually.
Hope it will help  u
Regards

Similar Messages

  • No control line for line item - error while posting bd to accounting

    Hi all,
    Billing document showing err "no control line for line item" while posting to accounting doc.Sales document is complete no in completion logs.
    Previous errr: g/l missing for line item" in order incompletion after maintaining company code for customer, then refresh the g/l missing for line item is no more logs and showing the error "no control line for line item" while posting bd to accts.
    Please help
    Regards
    anush

    Hello Anush,
    if the company data of the payer was not created when the sales order has been created, then the system could not create the correct records in table VBREVK. Once the company data has been maintained the VBREVK records could be corrected by re-saving the sales, but only if no billing document exists.
    In your case you already created the billing document.
    Please try these step:
    1. reverse billing document
    2. run VA02 add a blank char to PO number, save
    3. create new billing document
    Best regards,
    Ivano.

  • Error message "No business area can be determined for item 000010"

    Hi all,
    I had maintained business area assignements.
    However, while creating a sales order, the following error message appears : "No business area can be determined for item 000010"
    What does it mean ? And how can I fix this problem ?
    Regards,
    Bahia.
    Edited by: Bahia M. on Nov 13, 2008 11:58 AM

    Dear Bahia,
    Please go to IMG path assign the business area
    IMG>Enterprise structure>Assignment>Sales and Distribution>Business Area Account Assignment-->Define Rules By Sales Area(Roule 1)
    -->Assign Business Area To Plant And Division
    I hope this will help you,
    Regards,
    Murali.

  • Error in account assignment for item

    Hello,
    We have configured EBP at Stack 03 in SRM release 550
    We are facing problem to create shopping cart,
    Already it was working fine but now at the time of adding item to shopping cart it shows below error
    messages
    1.Version 0 is not defined for fiscal year 2007
    2.Error in account assignment for item
    For your reference error screen is given in attached document.
    pls advise
    Regards,
    Santosh

    Hi Christophe,
    I am getting the same error <b>'Version 0 is not defined for fiscal year 2007'</b> when tried to create a Sales Order in IDES system and I am trying the solution to add the fiscal year 2007 in T.code OKEV but it fails.
    The steps what I have done :
    1. Go to OKEV
    2. Selecting control area 1000
    3. Selecting the version 0 line
    4. then trying to open the Settings for Each fiscal year from Dialog Structure
    The error i get is :
    <b>E: Activation of the indicator is not permitted</b>
    and the highlighted line in red is for Version 1
    The default indicator is set for version 1 is Plan, WIP/RA, Variance & Legal Valuation (Valuation view)
    I tried in many ways to 'uncheck' the boxes for this version 1 but fails.
    Pls help.
    regds,
    Umesh

  • Error in net price calculation, item 000010 (Please correct)

    Hi
    Can you tell me error and correction for the same ? It occurs during creation of Std.PO. whom RM1000 prcing procedure is assigned.
    Error in net price calculation, item 000010 (Please correct)
         Message no. 06213
    Diagnosis
         Possible causes:
         o   The net price is negative.
             Check the prices and conditions entered.
         o   An error has occurred during currency translation.
             Check whether the foreign currency is defined in the system.
         o   The unit of measure of an item is not allowed.
             Check the units of measure entered.
         o   An internal error has occurred during the price determination
             process.
             A mandatory condition type is not defined in the system. Please
    In the analysis under item details condition tab I got message 301 as Acess 0002 12 is missing.
    Acess seq. 0002 is assigned to condition type PB00.

    I know this thread is very old but I had the same issue and found the solution.
    Enter the SubTotal in the pricing scheme for condition P101 (in my Case 9 - Copy values to KOMP-BRTWR (gross value)).
    Than it works for my case.
    Hope this helps.

  • No business area can be determined for item 000010

    Hi All
    I'm facing above error during sales contract (T code VA41) creation.The following are the scenario,
    we had two plants, one is manufacturing 'A' and another one is warehouse plant 'B'.Noramally we will do GR against production order in manufacturing plant 'A'and will make stock transfer to ware house plant 'B'.We made this transaction and material also transferred.
    But we are trying make sales from warehouse plant 'B' for that material.We are getting error message during sales contract creation 'No business area can be determined for item 000010'.This error comes for all materials extended to warehouse plant 'B'.This plant newly created,we checked all config every thing alright.
    Anybody can help me out of this issue.
    S S

    Hi Suresh,
    Go to TCode: SPRO -- Enterprise structure -- Assignment -- Sales and Distribution -- Business Area Account Assignment -- Assign Business Area To Plant And Division and check also --  Assign Business Area by Sales Area.
    Check whether you have maintained here the necessary settings for plant B.
    Hope this solves your problem.
    Thanks,
    Viswanath

  • Foreign trade data incomplete for item 000010

    Hi,
    When we release the billing doc (while sending for accounting), I am getting the following message:
    "Foreign trade data incomplete for item 000010"
    While debugging I found when the field UVALL is "X" such message will come.
    Can anyone tell me why it is coming n how to correct this?
    Is this because of material master?
    Please reply immediately though Purchase Orders also affected.

    Did not receive any answer from SDN

  • Error :-Cancel transfer order for item

    Hi,
    The material has batch split and we are facing an error while cancelling transfer order for one item.Now here 4 items are there out of which item 1 is batch split i am able to cancel transfer order for 2,3 and 4 item whereas in item 1,sub category 10 (pick quantity is grade out) can you suggest why i am not able to cancel it.
    Thanks,
    Dharmesh

    Hello,
    Since item 10 is covered via WM hence the picking qty is grayed out.
    You can go the document flow and find out for item 10 what is the TO no and also if its  completed ( confirmed) or not. If its confirmed, then you cant cancel the TO.
    If its no you can cancel the TO via LT15.
    Thanks,

  • Handle Reverse charges tax lines from Sabrix for creation of new Invoice document.

    Hi Gurus,
    I am facing an issue in case where Sabrix is returning Reverse Charge Lines as show below:
    Tax Rate
    Tax Amount
    Tax Base
    -0.24
    -240
    1000
    0.24
    240
    1000
    The original invoice Line item was as follows:
    Net Amount : 1000.00
    Tax Amount : 0.00
    PO Number at line level.
    Tax code : I1
    Now, I am using BAPI : BAPI_INCOMINGINVOICE_CREATE to create an invoice document for non reverse charge scenarios. I am filling table : GLACCOUNTDATA with other details such as GL account, tax code, amount, etc from Invoice related document and PO.
    But I have no idea where should I push these reverse charge lines.
    Please help me from technical perspective on how to assimilate these reverse charge lines.
    Thanks and Regards,
    Saurabh.

    HELLO STAR SHANKAR SIR,
    Oh gr8. first time seeing this type of question.....
    u r really...................
    with regards
    Suvetha
    Gayathri

  • Multiple OINM lines for one INV1 (or other document) line

    Hello,
    I'm trying to do report application using warehouse journal table (OINM) and I see that sometimes exists more than one line in OINM corresponding to one document line (eg. INV1). What is the reason of that multiplicity? Item at the position is managed by batches but only one batch is used in the document.
    Thanks for reply.
    K.

    Hello,
    If you using FiFo as stock valuation method, then it may happens, that for the same bacth number you have more than one fifo layers. (Please note batch is a property).
    Regards
    János

  • SIS: quantity for items at $0 invoice

    Hello,
    I have created an info structure (with update rules), and then a report (using Report Painter) based on that info structure. The key figure in this  report is invoiced quantity. The report shows quantity only if Net Value for this Item(in the invoice)  is not $0.00. When I display data in the table for my info structure, what ever items were invoiced at $0 are not in the table (it probably has something to do with update rules)
    Q: Is it possible to show all invoiced quantities, even if a Net Value if the invoiced item is $0.00 ?
    Thank you in advance,
    Olga

    I got it:
    You just need to assign Statistics groups for each sales document Item type

  • Error message not authorized for items on this computers

    when snycing i receive this error message and nearly every purchased song won't sync.

    Is your iTunes library authorized with the account you used to purchase these tracks from the iTunes Store?  To check, head to Store -> Authorize this Computer and enter in the same Apple ID credentials used to purchase the tracks.
    B-rock

  • CS5 Error: Updating the cache for items within the folder recursively

    I have another odd issue and have no clue to what would resolve this.
    I'm on Mac OS X 10.6.8. Bridge CS5
    I've been getting the same message when creating a new folder. However when I create a new folder in my Finder window, it creates the folder immediately and reflects as such in bridge.
    I can cope with creating folders this way. But it becomes a pest when I forget to do it.
    One thing is, the only time this happens is when using our server. But this has not always been the case.
    This thread below also has the same issue and wasn't resolved:
         http://forums.adobe.com/thread/994281?start=0&tstart=0

    BEA Marcom wrote:
    One thing is, the only time this happens is when using our server. But this has not always been the case.
    I suspect it has to do with server issue.  Some have found they had a 10 sec or more delay and that if the server is pointed to Favorites Bridge wants to cache all the files on the server.  May be something like that.   

  • Enable change logs for item level of Sales Document

    Hi,
    On transaction VA02, additional screen field (Booking Date) is added (& consequently 2 appends with date field in the tables VBAK & VBAP).
    When this date is changed in the header, the corresponding dates are changed in the item level as well.
    However, the change documents are created only for table VBAK (though item data is updated in VBAP also).
    When the date is changed at the item level, the change logs are created for the corresponding field in table VBAP.
    The data element has 'Change Document' checked.
    How can I activate the change to be logged for the item level (VBAP), when the date is changed at header level (VBAK)?

    Hi Nidhi,
    Maybe set a breakpoint in include MV45AF0C_CHANGE_DOCUMENT_CREAT
    Then check in UPDATE debug mode the value of upd_vbap and the contents of xvbap which are passed on to function VERKBELEG_WRITE_DOCUMENT .
    This function creates the change documents based on the data changes.
    I would have thought that since the date values are changed at item level as well when you only change it at the header, they should get a change document created automatically, since the dates must be in the XVBAP table (as their value is changed at the DB).
    So I would compare the various internal tables for both scenarios (header change,  item change) to determine their differences.
    After this use one of the user-exits to populate the internal tables for the header scenario based on the values of the item scenario. I would feel this to be a last resort though, since something appears not to be working correctly (I think).
    Hope this makes sense,
    Robert

  • Error-M2O-Settlement rule for assembly order for item...could not be genera

    Hi,
    When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
    But while saving the sales order, the below error message is displaed:
    Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                    Yes/No
    1. If No is choosen the following error message is displayed
           Error when processing Production order
          Error when processing Production order
          Message no. V1380
          Diagnosis
            A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the  following meanings:
    1 = External block,  2 = General error,  3 = Insufficient data for the interface,  4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued.  Procedure: Inform your system administrator.
    2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
    "Distribution rule for Sales document item can only be created automatically Message no. KD063"
    We are using the requierement class with below details:
    Reqmts class: ZSO- for M2O
    AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
    Settlement profile contain:
    Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
    If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
    The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
    Need your valuable inputs to meet this requirement.
    Let me know if you need any further details.
    Thanks in advance.
    Regards,
    ADI

    Dear SAP PP Consultant ,
    What is the strategy group you are maintained in the material master ?

Maybe you are looking for