CS6 download to different internal HD

Can you download PS CS6 to a secondary int. HD that is being used as the boot drive?

John you can customize the installation location to install to a secondary drive. Please be aware though that there will still be shared resources stored on the operating system hard drive.

Similar Messages

Call function 'Download' using different internal tables

Hi everyone!
i declare 10 different internal tables, with the same structure but different data.
i need to create 10 different files (one from each internal table)
i dont want to call 10 times the function download.
is there someway to put a variable name(that refeer to my internal table)
something like this.
PERFORM Create_file USING mytable.
PERFORM Create_file USING mytable2.
PERFORM Create_file USING mytable3.
PERFORM Create_file USING etc....
FORM create_file USING table.
DATA: file(128),
        zcancel(1).
archivo = 'c:\loans.dat'.
CALL FUNCTION 'DOWNLOAD'
       EXPORTING
            bin_filesize        = ' '
            codepage            = ' '
            filemask_all        = ' '
            filemask_mask       = ' '
            filemask_text       = ' '
            filename            = file
            filetype            = 'dat'
            filetype_no_change = ' '
            filetype_no_show    = ' '
            item                = ' '
            mode                = ' '
            wk1_n_format        = ' '
            wk1_n_size          = ' '
            wk1_t_format        = ' '
            wk1_t_size          = ' '
       IMPORTING
            cancel              = zcancel
       TABLES
            data_tab            = <b>TABLE</b>
       EXCEPTIONS
            invalid_filesize    = 01
            invalid_table_width = 02
            invalid_type        = 03
            no_batch            = 04
            unknown_error       = 05.
ENDFORM.

Hi,
Check this example..
It download t_mara1 & t_mara2..Modify the code according to your requirement..
DATA: t_mara1 LIKE mara OCCURS 0 WITH HEADER LINE.
DATA: t_mara2 LIKE mara OCCURS 0 WITH HEADER LINE.
DATA: v_filename LIKE rlgrap-filename.
DATA: v_char5(5).
FIELD-SYMBOLS: <fs> TYPE table.
DATA: v_variable(30).
DO 2 TIMES.
CLEAR: v_filename.
v_char5 = sy-index.
SHIFT v_char5 LEFT DELETING LEADING space.
CONDENSE v_char5.
CONCATENATE 'C:\TEST' v_char5 '.TXT' INTO v_filename.
CONCATENATE 'T_MARA' v_char5 '[]' INTO v_variable.
ASSIGN (v_variable) TO <fs>.
CALL FUNCTION 'DOWNLOAD'
       EXPORTING
            filename                = v_filename
            filetype                = 'DAT'
       TABLES
            data_tab                = <fs>
       EXCEPTIONS
            invalid_filesize        = 1
            invalid_table_width     = 2
            invalid_type            = 3
            no_batch                = 4
            unknown_error           = 5
            gui_refuse_filetransfer = 6
            customer_error          = 7
            OTHERS                  = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDDO.
Thanks,
Naren

CS6 download to different computer

I want to install CS6 on a different computer. I do not have the install disk as it was a download, but I have the serial number. Where do I go online to do this, and I assume I have to uninstall it on the first computer?

Hi,
If you purchased the product as a download, I would recommend referring this link to locate your download link:
Find a Download link
Downloading the trial version is an alternative as you can always convert it to a full version using your serial number.
Please remember to deactivate the application on your other computer before you activate it on a different machine:
Deactivate Adobe Product
Thanks

Where do I find my Update Adobe Photoshop CS6 downloaded on my computer

where do I find my Update Adobe Photoshop CS6 downloaded on my computer.
because when i work on my computer without an Internet connection i can update
also when i make formate again i can update.
thank y

Update Adobe Photoshop CS6 is two way different :-
First : manually you can download from adobe
and the others
Second : adobe bridege - help - updated
Now i have all update from first and second.
Only i want to know the place to keep it

DATA UPLOAD into 5 Different Internal Tables !!!

Hi ABAPers,
I have data in 5 different TABS of an Excel Sheet.
I have to UPLOAD this data in these different TABS to 5 different Internal tables.
Can any one give me a solution to this ???

take data from all internal tabels into final internal table.....and proceed in below way......
fill ur inetnal table and call call the below form DOWNLOAD_TO_EXCEL, This Form is displaying an internal table it_outtab
Move data from it_outtab to it_excel
it_excel will contain all the charecter fields
DATA : BEGIN OF IT_EXCEL OCCURS 0,
FLD1(32),
FLD2(32),
FLD3(32),
FLD4(32),
FLD5(32),
FLD6(32),
FLD7(32),
FLD8(32),
FLD9(32),
FLD10(32),
FLD11(32),
FLD12(32),
FLD13(32),
FLD14(32),
FLD15(32),
FLD16(32),
FLD17(32),
FLD18(32),
FLD19(32),
FLD20(32),
FLD21(32),
END OF IT_EXCEL.
FORM DOWNLOAD_TO_EXCEL.
PERFORM GET_FILE_NAME .
CLEAR IT_EXCEL.
REFRESH IT_EXCEL.
IF NOT FNAME IS INITIAL .
PERFORM POPULATE_HEADER_DETAIL.
LOOP AT IT_OUTTAB.
IT_EXCEL-FLD1 = IT_OUTTAB-BANFN.
IT_EXCEL-FLD2 = IT_OUTTAB-BNFPO.
IT_EXCEL-FLD3 = IT_OUTTAB-EBELN.
IT_EXCEL-FLD4 = IT_OUTTAB-EBELP.
IT_EXCEL-FLD5 = IT_OUTTAB-STYLE.
IT_EXCEL-FLD6 = IT_OUTTAB-SKU.
IT_EXCEL-FLD7 = IT_OUTTAB-LP_COLOR.
IT_EXCEL-FLD8 = IT_OUTTAB-MAKTX.
IT_EXCEL-FLD9 = IT_OUTTAB-CURR_PRICE.
IF NOT IT_OUTTAB-VALID_FROM IS INITIAL.
CONCATENATE IT_OUTTAB-VALID_FROM+4(2) '/'
IT_OUTTAB-VALID_FROM+6(2) '/'
IT_OUTTAB-VALID_FROM(4) INTO IT_EXCEL-FLD10.
ENDIF.
IF NOT IT_OUTTAB-VALID_TO IS INITIAL.
CONCATENATE IT_OUTTAB-VALID_TO+4(2) '/'
IT_OUTTAB-VALID_TO+6(2) '/'
IT_OUTTAB-VALID_TO(4) INTO IT_EXCEL-FLD11.
ENDIF.
IT_EXCEL-FLD12 = IT_OUTTAB-FUT_PRICE.
IT_EXCEL-FLD13 = IT_OUTTAB-FAC_PRICE.
IF NOT IT_OUTTAB-FAC_VALID_FROM IS INITIAL.
CONCATENATE IT_OUTTAB-FAC_VALID_FROM+4(2) '/'
IT_OUTTAB-FAC_VALID_FROM+6(2) '/'
IT_OUTTAB-FAC_VALID_FROM(4) INTO IT_EXCEL-FLD14.
ENDIF.
IF NOT IT_OUTTAB-FAC_VALID_TO IS INITIAL.
CONCATENATE IT_OUTTAB-FAC_VALID_TO+4(2) '/'
IT_OUTTAB-FAC_VALID_TO+6(2) '/'
IT_OUTTAB-FAC_VALID_TO(4) INTO IT_EXCEL-FLD15.
ENDIF.
IT_EXCEL-FLD16 = IT_OUTTAB-JPN_PRICE.
IT_EXCEL-FLD17 = IT_OUTTAB-EAN11_1.
IT_EXCEL-FLD18 = IT_OUTTAB-EAN11_2.
IT_EXCEL-FLD19 = IT_OUTTAB-HANG_TAG_STAT.
IT_EXCEL-FLD20 = IT_OUTTAB-LABEL_STAT.
IT_EXCEL-FLD21 = IT_OUTTAB-CJI_STAT.
APPEND IT_EXCEL.
CLEAR IT_EXCEL.
ENDLOOP.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
CHECK_VERSION = ' '
DATA_NAME = FNAME
DATA_PATH_FLAG = ''
DATA_TYPE = 'DAT'
DATA_BIN_FILE_SIZE =
MACRO_NAME = ' '
MACRO_PATH_FLAG = 'E'
FORCE_START = ' '
WAIT = ''
IMPORTING
WINID =
TABLES
DATA_TAB = IT_EXCEL
EXCEPTIONS
NO_BATCH = 1
EXCEL_NOT_INSTALLED = 2
WRONG_VERSION = 3
INTERNAL_ERROR = 4
INVALID_TYPE = 5
CANCELLED = 6
DOWNLOAD_ERROR = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF .
ENDFORM. " DOWNLOAD_TO_EXCEL
FORM GET_FILE_NAME.
DATA: TMP_FILENAME LIKE RLGRAP-FILENAME,
GLOBAL_FILEMASK_ALL(80),
GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20),
GLOBAL_DOWNLOAD_PATH LIKE RLGRAP-FILENAME,
DEF_PATH LIKE RLGRAP-FILENAME,
FIELDLN TYPE I,
MODE TYPE C,
TMP_MASK LIKE GLOBAL_FILEMASK_ALL.
FIELD-SYMBOLS: .
IF GLOBAL_FILEMASK_MASK IS INITIAL.
TMP_MASK = ',.,..'.
ELSE.
TMP_MASK = ','.
WRITE GLOBAL_FILEMASK_TEXT TO TMP_MASK+1.
WRITE ',' TO TMP_MASK+21.
WRITE GLOBAL_FILEMASK_MASK TO TMP_MASK+22.
WRITE '.' TO TMP_MASK+42.
CONDENSE TMP_MASK NO-GAPS.
ENDIF.
IF NOT GLOBAL_FILEMASK_ALL IS INITIAL.
TMP_MASK = GLOBAL_FILEMASK_ALL.
ENDIF.
FIELDLN = STRLEN( DEF_PATH ) - 1.
ASSIGN DEF_PATH+FIELDLN(1) TO .
ENDIF.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = FNAME "rlgrap-filename
DEF_PATH = DEF_PATH
MASK = TMP_MASK
MODE = MODE
TITLE = ' '
IMPORTING
FILENAME = FNAME
RC =
EXCEPTIONS
INV_WINSYS = 01
NO_BATCH = 02
SELECTION_CANCEL = 03
SELECTION_ERROR = 04.
IF SY-SUBRC = 0.
FNAME = TMP_FILENAME.
ELSE.
ENDIF.
ENDFORM. " GET_FILE_NAME
FORM POPULATE_HEADER_DETAIL.
IT_EXCEL-FLD8 = 'S U D H E E R'.
APPEND IT_EXCEL.
CLEAR IT_EXCEL.
IT_EXCEL-FLD1 = 'Price Validation Report'.
IT_EXCEL-FLD14 = 'Page'.
APPEND IT_EXCEL.
CLEAR IT_EXCEL.
IT_EXCEL-FLD1 = 'Vendor Number/Name'.
IT_EXCEL-FLD3 = 'Plan Month'.
IT_EXCEL-FLD4 = 'Effective In-store-Date'.
APPEND IT_EXCEL.
CLEAR IT_EXCEL.
IT_EXCEL-FLD1 = VENDOR_NAME.
IT_EXCEL-FLD3 = P_BEDNR.
IT_EXCEL-FLD4 = P_EFF_DT.
APPEND IT_EXCEL.
CLEAR IT_EXCEL.
sudheer start
APPEND IT_EXCEL.
IT_EXCEL-FLD1 = 'PR'.
IT_EXCEL-FLD2 = 'Line'.
IT_EXCEL-FLD3 = 'PO'.
IT_EXCEL-FLD4 = 'PO Line'.
IT_EXCEL-FLD5 = 'Style'.
IT_EXCEL-FLD6 = 'SKU'.
IT_EXCEL-FLD7 = 'Long Color'.
IT_EXCEL-FLD8 = 'Material Description'.
IT_EXCEL-FLD9 = 'Current Price'.
IT_EXCEL-FLD10 = 'validity'.
IT_EXCEL-FLD11 = 'Period'.
IT_EXCEL-FLD12 = 'Future Price'.
IT_EXCEL-FLD13 = 'Factory Price'.
IT_EXCEL-FLD14 = 'Validity'.
IT_EXCEL-FLD15 = 'Period'.
IT_EXCEL-FLD16 = 'Japan Price'.
IT_EXCEL-FLD17 = 'First UPC'.
IT_EXCEL-FLD18 = 'Factory UPC'.
IT_EXCEL-FLD19 = 'Hang Tag Status'.
IT_EXCEL-FLD20 = 'Label Status'.
IT_EXCEL-FLD21 = 'CJI Label Status'.
*sudheer end
APPEND IT_EXCEL.
CLEAR IT_EXCEL.
ENDFORM. " POPULATE_HEADER_DETAIL
Check these links for sample code :
http://www.sapdevelopment.co.uk/ms/ms_excel.htm
please check this example:
FORM download.
DATA: lh_file1 TYPE rlgrap-filename,
lh_file2 TYPE rlgrap-filename,
lh_file3 TYPE rlgrap-filename,
lh_datda(1).
CLEAR: lh_file1, lh_file2, lh_file3.
Download neue Daten
CONCATENATE xh_pfad 'Datafile materialmaster new ' sy-datum(4)
sy-datum4(2) sy-datum6(2) sy-uzeit '.xls' INTO lh_file1.
working area
DATA: index TYPE i,
lh_col TYPE i.
FIELD-SYMBOLS: .
SORT xt_bmm00 BY matnr.
SORT xt_bmmh1 BY matnr.
SORT xt_bmmh4 BY matnr.
SORT xt_bmmh7 BY matnr.
IF NOT xt_bmm00[] IS INITIAL.
MOVE 'X' TO lh_datda.
DO 4 TIMES.
CASE sy-index.
WHEN 1.
CREATE OBJECT lh_excel 'EXCEL.APPLICATION' .
SET PROPERTY OF lh_excel 'Visible' = 1 .
GET PROPERTY OF lh_excel 'Workbooks' = lh_workbooks .
GET PROPERTY OF lh_workbooks 'Application' = lh_application .
SET PROPERTY OF lh_application 'SheetsInNewWorkbook' = 1 .
CALL METHOD OF lh_workbooks 'Add' = lh_workbook .
CALL METHOD OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Item' = lh_sheet
EXPORTING #1 = sy-index .
SET PROPERTY OF lh_sheet 'NAME' = 'BMMH7'.
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S005'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_bmmh7.
index = sy-tabix + 1.
DO 4 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_bmmh7 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
WHEN 2.
GET PROPERTY OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Add' = lh_newsheet .
SET PROPERTY OF lh_newsheet 'Name' = 'BMMH4'.
CALL METHOD OF lh_excel 'WorkSheets' = lh_activesheet
EXPORTING #1 = 'BMMH4'.
CALL METHOD OF lh_activesheet 'Activate' .
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S004'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_bmmh4.
index = sy-tabix + 1.
DO 4 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_bmmh4 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
WHEN 3.
GET PROPERTY OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Add' = lh_newsheet .
SET PROPERTY OF lh_newsheet 'Name' = 'BMMH1'.
CALL METHOD OF lh_excel 'WorkSheets' = lh_activesheet
EXPORTING #1 = 'BMMH1'.
CALL METHOD OF lh_activesheet 'Activate' .
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S003'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
Die folgende Abfrage ist notwendig, weil der Namensraum ZZ...
in der Struktur nicht erlaubt ist, aber im Excel-Sheet als
Überschrift gebraucht wird.
IF xt_ftab-fieldname = 'SPIRIDON'.
MOVE 'ZZSSN' TO xt_ftab-fieldname.
ENDIF.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_bmmh1.
index = sy-tabix + 1.
DO 72 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_bmmh1 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
WHEN 4.
GET PROPERTY OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Add' = lh_newsheet .
SET PROPERTY OF lh_newsheet 'Name' = 'BMM00'.
CALL METHOD OF lh_excel 'WorkSheets' = lh_activesheet
EXPORTING #1 = 'BMM00'.
CALL METHOD OF lh_activesheet 'Activate' .
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S002'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_bmm00.
index = sy-tabix + 1.
DO 21 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_bmm00 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
ENDCASE.
ENDDO.
CALL METHOD OF lh_workbook 'SAVEAS'
EXPORTING #1 = lh_file1.
CALL METHOD OF lh_excel 'QUIT'.
FREE OBJECT: lh_cells, lh_sheet, lh_sheets, lh_application,
lh_workbook, lh_workbooks, lh_excel,
lh_chart, lh_activesheet.
ENDIF.
Download geänderter Materialstammdaten
CONCATENATE xh_pfad 'Datafile materialmaster change ' sy-datum(4)
sy-datum4(2) sy-datum6(2) sy-uzeit '.xls' INTO lh_file2.
IF NOT xt_emmh1[] IS INITIAL.
MOVE 'X' TO lh_datda.
DO 2 TIMES.
CALL METHOD OF lh_sheets 'Item' = lh_sheet
EXPORTING #1 = sy-index .
CASE sy-index.
WHEN 1.
CREATE OBJECT lh_excel 'EXCEL.APPLICATION' .
SET PROPERTY OF lh_excel 'Visible' = 1 .
GET PROPERTY OF lh_excel 'Workbooks' = lh_workbooks .
GET PROPERTY OF lh_workbooks 'Application' = lh_application .
SET PROPERTY OF lh_application 'SheetsInNewWorkbook' = 1 .
CALL METHOD OF lh_workbooks 'Add' = lh_workbook .
CALL METHOD OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Item' = lh_sheet
EXPORTING #1 = sy-index .
SET PROPERTY OF lh_sheet 'NAME' = 'BMMH7'.
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S005'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_emmh7.
index = sy-tabix + 1.
DO 4 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_emmh7 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
WHEN 2.
GET PROPERTY OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Add' = lh_newsheet .
SET PROPERTY OF lh_newsheet 'Name' = 'BMMH1'.
CALL METHOD OF lh_excel 'WorkSheets' = lh_activesheet
EXPORTING #1 = 'BMMH1'.
CALL METHOD OF lh_activesheet 'Activate' .
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S003'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
Die folgende Abfrage ist notwendig, weil der Namensraum ZZ...
in der Struktur nicht erlaubt ist, aber im Excel-Sheet als
Überschrift gebraucht wird.
IF xt_ftab-fieldname = 'SPIRIDON'.
MOVE 'ZZSSN' TO xt_ftab-fieldname.
ENDIF.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_emmh1.
index = sy-tabix + 1.
DO 72 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_emmh1 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
ENDCASE.
ENDDO.
CALL METHOD OF lh_workbook 'SAVEAS'
EXPORTING #1 = lh_file2.
CALL METHOD OF lh_excel 'QUIT'.
FREE OBJECT: lh_cells, lh_sheet, lh_sheets, lh_application,
lh_workbook, lh_workbooks, lh_excel,
lh_chart, lh_activesheet.
ENDIF.
Download geänderter Texte
CONCATENATE xh_pfad 'Datafile materialmaster change PO ' sy-datum(4)
sy-datum4(2) sy-datum6(2) sy-uzeit '.xls' INTO lh_file3.
IF NOT xt_tmmh7[] IS INITIAL.
CLEAR: lh_cells, lh_sheet, lh_sheets, lh_application,
lh_workbook, lh_workbooks, lh_excel,
lh_chart, lh_activesheet.
MOVE 'X' TO lh_datda.
CREATE OBJECT lh_excel 'EXCEL.APPLICATION' .
SET PROPERTY OF lh_excel 'Visible' = 1 .
GET PROPERTY OF lh_excel 'Workbooks' = lh_workbooks .
GET PROPERTY OF lh_workbooks 'Application' = lh_application .
SET PROPERTY OF lh_application 'SheetsInNewWorkbook' = 1 .
CALL METHOD OF lh_workbooks 'Add' = lh_workbook .
CALL METHOD OF lh_workbook 'Sheets' = lh_sheets .
CALL METHOD OF lh_sheets 'Item' = lh_sheet
EXPORTING #1 = 1 .
SET PROPERTY OF lh_sheet 'NAME' = 'BMMH7'.
Überschrift erstellen
CLEAR xt_ftab.
REFRESH xt_ftab.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
langu = sy-langu
tabname = '/SIE/TS_MM01S005'
withtext = ' '
only = 'T'
TABLES
fieldtab = xt_ftab
EXCEPTIONS
OTHERS = 1.
CLEAR lh_col.
LOOP AT xt_ftab.
ADD 1 TO lh_col.
PERFORM fill_cell
USING 1 lh_col xt_ftab-fieldname lh_excel lh_cells.
ENDLOOP.
LOOP AT xt_tmmh7.
index = sy-tabix + 1.
DO 4 TIMES.
ASSIGN COMPONENT sy-index OF STRUCTURE xt_tmmh7 TO lh_excel lh_cells.
ENDIF.
ENDDO.
ENDLOOP.
CALL METHOD OF lh_workbook 'SAVEAS'
EXPORTING #1 = lh_file3.
CALL METHOD OF lh_excel 'QUIT'.
FREE OBJECT: lh_cells, lh_sheet, lh_sheets, lh_application,
lh_workbook, lh_workbooks, lh_excel,
lh_chart, lh_activesheet.
ENDIF.
IF lh_datda NE 'X'.
MESSAGE i016.
ENDIF.
ENDFORM. " download
FORM fill_cell USING p_i
value
p_customer_cell1
h_excel
h_cells.
CALL METHOD OF h_excel 'Cells' = h_cells EXPORTING #1 = p_i #2 = value.
SET PROPERTY OF lh_cells 'Numberformat' = '@'.
SET PROPERTY OF h_cells 'Value' = p_customer_cell1.
ENDFORM. " fill_cell

CS6 download - wrong english

CS6 download - accidentally installed north american english version rather than international (British) version, can I install correct version over the top?

SUre. Though I fail to see the point. Aside from really minor UI string differences, this doesn't really change anything. All spell checkers and dictionaries can be set to other languages without such a reinstall...
Mylenium

Downloading two different text files using gui_download

Hi Folks,
I have two internal tables.itab1 and itab2.Generally in most cases I have to download only the data in itab1 as a text file using Gui_download.In some cases if a particular condition is satisfied I need to download both itab1 and itab2 data as two different text files using gui_download.To achieve this I had called the gui_download twice as I have to pass two different internal tables.
But I am getting only itab1 textfile and not itab2 textfile.
In the selection screen I am giving the path as c:\..
Kindly let me know where I am going wrong.
K.Kiran.

Hi
You keep the both files in a ITAB and in the loop of that Itab use GUI_DOWNLOAD to download the two files
data: begin of itab,
file like rlgrap-filename,
end of itab.
In initialization event
put the two files into this ITAB.
loop at itab
call function gui_download.
endloop.
check like this
Regards
Anji

Why is the contents of Safari's downloads folder different than the actual folder?

Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.

RTorrent: move downloads to different directories depending on tracker

Hi!
I would like rTorrent to move completed downloads to different directories depending on the trackers in the torrent. An ideal setup for me would be something like this:
torrents/completed/tracker_x
torrents/completed/tracker_y
torrents/completed/tracker_z
torrents/completed/unknown_trackers
torrents/incomplete
torrents/torrent_files
torrents/session_data
Any hints/links/etc for me? I think i can make something work if rTorrent could pass the .torrent file path and downloading directory to a bash script

very lazily copied out my .rtorrentrc
32 schedule = watch_directory_1,10,10,"load_start=/home/share/media/torrents/foo/*.torrent,d.set_custom1=/home /share/media/video/foo"
33 schedule = watch_directory_2,10,10,"load_start=/home/share/media/torrents/bar/*.torrent,d.set_custom1=/home/s hare/media/video/bar"
39 on_finished = move_complete,"d.set_directory=$d.get_custom1= ;execute=mv,-u,$d.get_base_path=,$d.get_custom1="
there's also this, but i think it doesn't actually move the files; it makes symlinks.
http://code.google.com/p/pyroscope/wiki … Completion
Last edited by tladuke (2010-12-12 23:31:40)

DNS resolution on Anyconnect - multiple different internal DNS servers

All,
We have multiple different internal windows AD domains within our network, that currently do not replicate their DNS zones between them.
Is there anyway with an ASA/anyconnect VPN to create a configuration so the ASA inspects the DNS lookups from a user connected via the anyconnect VPN client, and route it to a defined internal DNS server?
For example I have three internal AD domains site1.com with a dns server ip of 1.1.1.1 , site2.com 2.2.2.2, site3.com with a dns server ip of 3.3.3.3, when a user VPN's in and performs a dns lookup for the name server1.site1.com the ASA see's it is for site1.com and routes the lookup to 1.1.1., however when a user performs a dns lookup for server1.site2.com, the asa see's its is fro site2.com and routes the DNS lookup to 2.2.2.2.
Any thoughts on alteratives to over come the problem also welcome and/or if anyone can point me to a link that explains the function of "mulitple DNS server groups, which is located in the ASDM interface under Remote Access VPN->DNS (as I have not been able to find a plain english explanation of the function as I am unsure if this does what I am looking for)
Thanks

Hi Dominick,
I have a solution for your problem. You will need to log into the CLI of the WSA and issue the following commands:
s370r01.csw> dnsconfig
Currently using the local DNS cache servers:
1. Priority: 0 10.9.8.8
Choose the operation you want to perform:
- NEW - Add a new server.
- EDIT - Edit a server.
- DELETE - Remove a server.
- SETUP - Configure general settings.
- SEARCH - Configure DNS domain search list.
[]> localhosts <----- Hidden Command
Local IP to Host mappings:
Choose the operation you want to perform:
- NEW - Add new local IP to host mapping.
- DELETE - Delete an existing mapping.
[]> new
Enter the IP address of the host you are adding.
[]> 10.1.1.1 < -------- IP of the M series
Enter the canonical host name and any additional aliases (separate values with spaces)
[]> Host name of the M series. Hit enter until you get back to the command prompt and type commit then enter.
Sincerely,
Erik Kaiser
WSA CSE
WSA Cisco Forums Moderator

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

Using one public ip for ssh`ing to different internal servers using port-redirections

Hi, we are having a requirement to use the same public IP to ssh into different internal servers using port re-direction. So lets say from outside, if a user does ssh @ root 4.4.4.4 2222, it should go to a sshsrv1 and then ssh @ root 4.4.4.4 2223 to sshsrv2
My config is like this:-
object network sshsrv1
host 10.110.100.10
nat (inside,Outside) static 4.4.4.4 service tcp 22 2222
And then i allowed the object "sshsrv1" in my inbound acl from outside.
It dosen`t seem to work. Is this doeable?
Any suggestions??

Hi,
Would need to see your NAT configurations.
There is a possibility that you have a NAT configuration that might be preventing this from working. Then again you are using an extra public IP address for this so it seems strange.
Could you try the "packet-tracer" command
packet-tracer input outside tcp 12345 2222
This should tell us if there is some problem in the ASA configurations.
- Jouni

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

Will Time Machine back up iTunes media on a different internal drive

I have my iTunes media on a different internal drive.
Will Time machine back up that data as well?
I have two other internal drives, each 750gb.
Does Time Machine back those drives up as well? Or does it contain itself to the OS disk?

Stephen,
Amazingly, Time Machine will do this by default!! In fact, Time Machine will back up every volume that is present at the time of the initial backup, unless told to do otherwise. I keep my iTunes and iPhoto libraries on a secondary partition of my MBP's hard drive, and Time Machine backed that up automatically.
Your backup will be contained in a "Backups.backupdb" folder on whatever external volume you choose to use for Time Machine. Within this folder, you will find other folders named for the various volumes that are being backed up. As far as I know, there is no limit to how many can be kept.
Scott

Downloading data from internal table to xls file leading zeros are not disp

Hai abap gurus,
when i am downloading data from internal table to excle file. some field values in a column are with leading zeros and some others dont have leading zeros.but in the output it is showing without leading zeros. then how to get with exact values.
Ex:
<b>ECC Code.</b>
045234
88567
098456
but output is giving like this:
45234
88567
98456
how to get the actual values.....
plz help me in this matter.

Dear Kiran,
Those field in the internal table having Leading Zeroes, make those fields' datatype as character.
Then use the function module to download the content of the internal table to the excel file.
Regards,
Abir
Don't forget to Reward Points *

CS6 download to different internal HD

Similar Messages

Maybe you are looking for