How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

Similar Messages

How to join fields from different internal tables and display into one int

hai i have one doubt...
how to join fields from different internal tables and display into one internal table..
if anybody know the ans for this qus tell me......

hii
you can read data as per condition and then can join in one internal table using READ and APPEND statement..refer to following code.
SELECT bwkey                         " Valuation Area
         bukrs                         " Company Code
    FROM t001k
    INTO TABLE i_t001k
   WHERE bukrs IN s_bukrs.
IF sy-subrc EQ 0.
    SELECT bwkey                       " Valuation Area
           werks                       " Plant
      FROM t001w
      INTO TABLE i_t001w
       FOR ALL ENTRIES IN i_t001k
     WHERE bwkey = i_t001k-bwkey
       AND werks IN s_werks.
    IF sy-subrc EQ 0.
      LOOP AT i_output INTO wa_output.
        READ TABLE i_t001w INTO wa_t001w WITH KEY werks = wa_output-werks.
        READ TABLE i_t001k INTO wa_t001k WITH KEY bwkey = wa_t001w-bwkey.
        wa_output-bukrs = wa_t001k-bukrs.
        MODIFY i_output FROM wa_output.
        CLEAR wa_output.
      ENDLOOP.                         " LOOP AT i_output
    ENDIF.                             " IF sy-subrc EQ 0
regards
twinkal

How to insert values from different region into one table

Hi everyone
I have created a page which contains 4 html regions like region1,region 2 ...region 4
in region 1 i created 2 text items like (emp_name,emp_id).
in region 2 i created 2 date fields (start_date,end_date).
In region3 i created a tabular form which contains(job , hire_date).
in region 4 i created a textfield (%of Hike)
So i want to create a button(submit) .when i press the button it will insert all the informations provided by the user in different regions will be inserted to a table called employee_information.
Can i do this?
If it is possible please tell me how to do this
if not then tell me any alternative solution.
Thanks,
Regards,
Sabyasachi

Sabyasachi wrote:
Hi fac586
Can you please tell me step by step how to do it or can you please make an example in apex.oracle.com and give me the credentials so that i can know clarify my doubts.1. Create a Form using a Wizard. This will create the items and processes necessary to retrieve data from, and perform DML on, the table. The items will be contained in a single default region.
2. Create custom HTML regions on page.
3. Move items and buttons from the default region created by the Form Wizard by changing the Region value in the "Displayed" section of the item attributes page, or Page Items page; or reassign items to regions using the Reassign Region Items page.

How to Insert data from an XML file into an Oracle 10g table

Hello,
Please can you help me as I have hit a brick wall with this problem.
We are running version 10g Oracle and we will start receiving XML files with employee data that needs loading into a table, this is the XML file:
<?xml version="1.0"?>
<RECRUITS>
<RECRUIT>
<FIRST_NAME>Gordon</FIRST_NAME>
<LAST_NAME>Brown</LAST_NAME>
<SHORT_NAME>GORDONBROWN</SHORT_NAME>
<APP_NO>00002</APP_NO>
<STATUS>M</STATUS>
<DATE_FROM>21-JUL-2006</DATE_FROM>
<RESOURCE_TYPE>P</RESOURCE_TYPE>
<TITLE>Mr</TITLE>
<DATE_OF_BIRTH>28-DEC-1983</DATE_OF_BIRTH>
<SOCIAL_SEC>AB128456A</SOCIAL_SEC>
<PARTTIME_PCT>1</PARTTIME_PCT>
<SEX>M</SEX>
<ADDRESS_TYPE>1</ADDRESS_TYPE>
<ADDRESS>A HOUSE SOMEWHERE HERE</ADDRESS>
<ZIP_CODE>PE3 LLL</ZIP_CODE>
<PLACE>BOROUGH</PLACE>
<COUNTRY_CODE>UK</COUNTRY_CODE>
<PROVINCE>UK</PROVINCE>
<EMAIL>[email protected]</EMAIL>
</RECRUIT>
(FYI - there may be more than 1 employee in each file so all of the above will be repeated X amount of times)
</RECRUITS>
To make things simple we have created a table which mirrors the XML file completely to load the data into, the SQL i have used is thus:
CREATE TABLE RECRUITMENT
FIRST_NAME VARCHAR2(30),
LAST_NAME VARCHAR2(30),
SHORT_NAME VARCHAR2(30),
APP_NO NUMBER,
STATUS VARCHAR2(1),
DATE_FROM DATE,
RESOURCE_TYPE VARCHAR2(1),
TITLE VARCHAR2(4),
DATE_OF_BIRTH DATE,
SOCIAL_SEC VARCHAR2(9),
PARTTIME_PCT NUMBER,
SEX VARCHAR2(1),
ADDRESS_TYPE VARCHAR2(1),
ADDRESS VARCHAR2(30),
ZIP_CODE VARCHAR2(8),
PLACE VARCHAR2(10),
PROVINCE VARCHAR2(3),
EMAIL VARCHAR2(20)
Every method we try from the numerous documents and so called "user guides" have failed, please can somebody show me the PL/SQL i need to get this files data into the above table?
We need to be able to do this purely through SQL*PLUS as we hope - if we ever get it working manually to create a procuedure that will encapsulate everything so it can be run over and over again.
The XML file is sitting in the XMLDIR and is called REC.XML.
Please help : (

Hi, I have got some material for inserting data into oracle table from xml file, this might help you.
Create XML Document Table
create table XML_DOCUMENT_TABLE
FILENAME varchar2(64),
XML_DOCUMENT XMLTYPE
(This will be as per your record details).
Inserting record to Oracle Table
declare
XML_TEXT CLOB := '<smsnotification>
               <messageid> 256427844 </messageid>
          <protocolid> CO0NPS2KHQ </protocolid>
          <notifiedon> 1156123007416 </notifiedon>
          <status> 3PBI: Invalid </status>
<additionalinfo> Customer account not active </additionalinfo>
<carrierid> 1175 </carrierid>
</smsnotification>';
begin
insert into XML_DOCUMENT_TABLE values ('Receipt.xml',XMLTYPE(XML_TEXT));
end;
Select Statement
select extractValue(XML_DOCUMENT,'/smsnotification/messageid') Messageid,
extractValue(XML_DOCUMENT,'/smsnotification/status') Status,
extractValue(XML_DOCUMENT,'/smsnotification/carrierid') CarrierID
from XML_DOCUMENT_TABLE;

How to combine data from different input forms outside a nested iView

Hi,
i try to combine data from different input forms in a single one.
Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
Is there any solution?
Thanx
Mathias

Hi Scott,
i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
greets
mathias

How to "join" data from different SyncBO's within MAM?

Hi,
Have anyone tried "joining" the data from different SyncBO's into one in a custom MAM application? For example, the SyncBO MAM30_30 (Functional Location) has references to MAM30_016 (Catalog + Code Groups). Is there an easy way to display all of the related information together, instead of first looping through objects from MAM30_030, then for each individual object, loop through a list of MAM30_016?
Basically, the application that we're working with has 3000+ Functional Locations, so we are looking for a way to join the data and display them as one object to improve performance.
Many thanks!
Jeffrey

Thanks Norbert. Unfortunately, we cannot create new Syncbo's, as we have limited access to that R/3 backend.
Basically, what we want to do is customize the MAM bit so that it can display the Tech Obj List with all its codes and children item syncbo's, instead of having the user click on the link to see more info. We would like to do this without having to loop through the child sync bo's.
Many thanks!

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

How to scan data from one internal table to another

Hi All,
let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.

if u want to copy data from itab1 to itab2 then use
itab2[] = itab1[].
if u want to compare whether both itab1 and itab2 are same or not,use
if itab1[] = itab2[].
*--same
else.
*--not same
endif.
if u want to compare itabs based on primary key....
loop at itab1.
read table itab2 with key f1 = itab1-f1.
if sy-subrc <> 0.
*--not same....
endif.
endloop.
if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
append lines of itab1 from 1 to 3 to itab2.
if internal tables don't have same structure,
say only fields f1 and f2 are common,then
loop at itab1.
itab2-f1 = itab1-f1.
itab2-f2 = itab1-f2.
append itab2.
clear itab2.
endloop.
if there are many common fields then...
loop at itab1.
move-corresponding itab1 to itab2.
append itab2.
clear itab2.
endloop.
Please don't forget to reward points....!!!
Regards
vasu

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
    CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
       EXPORTING
         i_infoprovider           = s_cubename
         i_query                  = query_name
        i_t_parameter            = query_string_tab
       IMPORTING
         e_cell_data              = t_cell_data
         e_axis_data              = t_axis_data
         e_axis_info              = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to download data from an internal table to a text

Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.

Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
      wa_intab LIKE LINE OF intab,
      no_of_rec TYPE i,
      count TYPE i.
DATA: BEGIN OF f_intab,
        str(255) TYPE c,
      END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
      w_intab LIKE LINE OF t_intab,
      temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
            tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
            others RADIOBUTTON GROUP rad1,
            delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
    MESSAGE i001.
    EXIT.
ENDIF.
IF others = 'X'.    " check to ensure delimiter.
    IF delimit = ' '.
      MESSAGE i002.
      EXIT.
    ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'.       " default delimiter tab is used
      CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'DAT'
        mode                    = 'A'
      TABLES
        data_tab                = intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ELSE.             " If user defind delimiter is to be used
              Counts the number of fields                *
    DO.
      ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
      IF sy-subrc <> 0.
        EXIT.
      ELSE.
        count = count + 1.
      ENDIF.
    ENDDO.
    LOOP AT intab INTO wa_intab.
      DO count TIMES. " Adding the delimiter in required places
        ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
        CONCATENATE temp delimit <f> INTO temp.
      ENDDO.
      SHIFT temp.
      APPEND temp TO t_intab.
      CLEAR temp.
    ENDLOOP.
    CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'ASC'
        mode                    = 'A'
      TABLES
        data_tab                = t_intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

Filling dynamic internal table with data from other internal table

Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best Regards

Hi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji

How to insert data from different internal table into a data base table

Similar Messages

Maybe you are looking for