CSAP_MAT_BOM_DELETE
Hi All,
I am using the RFC CSAP_MAT_BOM_DELETE for deleting the BOMs of a material.
In my requirement, the ALV Report will show the list of materials.
The user will select a material and then proceed for the deletion.
The program will delete the particular material's BOM using the RFC CSAP_MAT_BOM_DELETE.
Now User wants to have a test run kind of functionality for this deletion.
The selection screen should have test run check box and the program should do a test run deletion.
But this RFC is not having test run like some BAPIs...
In such scenario, how to handle this requirement...???
Regards
Pavan
thsnks
Similar Messages
-
How to find function module in se37
hello friends,
i am supposed to extract revesion level, matnr, plant from sap to an excel sheet.
matnr and plant we can get from marc or mara, but i could not find revision level on these tables.
the technical name is REVLV
i searched for function modules in se37 i got 3 function modules, but there was no documentation,
how does anyone get tpo know which function module works for them , with out having documentation.Hi,
What is your requirement actually and what purpose I did't get you
any how I got these below FMs which is having the field REVLV
you can go through below FMs.
/SAPHT/DRM_MAT_BOM_READ
API_DOCUMENT_MAINTAIN2
API_DOCUMENT_SAVE_BOM
BAPI_DOCUMENT_CHANGE2
BAPI_DOCUMENT_CHECKIN2
BAPI_DOCUMENT_CHECKIN_REPLAC
BAPI_DOCUMENT_CHECKOUTCANCEL
BAPI_DOCUMENT_CHECKOUTMODIFY
BAPI_DOCUMENT_CHECKOUTSET2
BAPI_DOCUMENT_CHECKOUTVIEW2
BAPI_DOCUMENT_CREATE2
BAPI_DOCUMENT_CREATEFROMSRC2
BAPI_DOCUMENT_CREATENEWVRS2
BAPI_DOCUMENT_GETLATEST
BAPI_DOCUMENT_GETLATEST2
BAPI_DOCUMENT_GETSTRUCTURE
BAPI_DOCUMENT_WHEREUSED
BBP_PROD_REVLV_CHECK
C14SX_BAPI_DOC_CREATE2
C14SX_BAPI_DOC_CREATE2_EXIT
CAD_DISPLAY_BOM_WITH_SUB_ITE
CAD_ECM_READ
CDESK_CALL_CHECKOUT_WIZARD
CDESK_CHECKOUT_WIZARD
CDESK_CHECKOUT_WIZARD_RFC
CDESK_GET_STRUCTURE
CDESK_WHERE_USED
CM_DI_PROCEED_MAT_PROV
CO_SD_BOM_SELECT_DIALOG
CSAP_DOC_BOM_CREATE
CSAP_DOC_BOM_DELETE
CSAP_DOC_BOM_MAINTAIN
CSAP_DOC_BOM_READ
CSAP_MAT_BOM_CREATE
CSAP_MAT_BOM_DELETE
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_MAT_BOM_READ
CSEP_MAT_BOM_READ
CS_RT_DIALOG_CALL
CV115_ECN_CHECK
CV115_ECN_REVLEVEL_SET
CVAPI_DOC_CHANGE
CVAPI_DOC_CREATE
CVAPI_DOC_MAINTAIN
DMU_DOC_BOM_EXPLODE
DMU_DOC_BOM_READ
DMU_MAT_BOM_EXPLODE
DMU_MAT_BOM_READ
EXIT_SAPLQAAT_002
EXIT_SAPLQBCK_001
EXIT_SAPLQBCK_003
EXIT_SAPLQPL1_001
MB_CHECK_MPN_RELATION
MB_CHECK_MPN_VALIDITY
MB_MPN_CHANGE_READ_DATA
MB_SEARCH_HTN_MATERIAL
MEPO_CONFIRMATION_PAI
MEPO_CONFIRMATION_PBO
MEX_CHECK_REVISIONSSTAND
ME_CONFIRMATION_MAINTAIN
ME_SEARCH_REVISION_LEVEL
MMPUR_Q_INFORECORD_DISPLAY
QAAT_CHECK_QM
QBCK_INSP_TYPE_LIST
QBCK_INSP_TYPE_NEXT
QBCK_QINF_LIEF_ZAEHL
QBCK_QINF_QUANTITY_CHANGE
QBCK_QINF_READ
QBCK_QM_DOCUMENT_TEXTS
QBCK_QM_GR_CHECK
QBCK_QM_PUR_CHECK
QBCK_QM_PUR_MNG_UPD
QBCK_QM_SYSTEMS_COMPARE
QBCK_VB_QINF_PLOS2_POST
QBCK_VE_QINF_STATUS
QELA_QINF_SELECT
QPAP_PLAN_SELECT
QPL1_CHECK_CREATE_POSITION
QSS1_QINF_SHOW
QSS2_REVLV_F4
RFC_DISPLAY_BILL_OF_MATERIAL
ZQM_CREATE_05_INSPECTION_LOT
Regards
Ganesh -
Hi All,
I want to know some function module which takes material number which is a BOM as input and get all the component materials of it as the output. It should not take any other fields as input since I have only material BOM to pass an input field to FM
Thanks
RickyCSAP_BOM_ITEM_MAINTAIN
CSAP_DOC_BOM_CREATE
CSAP_DOC_BOM_DELETE
CSAP_DOC_BOM_ITEM_SELECT
CSAP_DOC_BOM_MAINTAIN
CSAP_DOC_BOM_READ
CSAP_MAT_BOM_ALLOC_CREATE
CSAP_MAT_BOM_ALLOC_DELETE
CSAP_MAT_BOM_CLOSE
CSAP_MAT_BOM_CREATE
CSAP_MAT_BOM_DELETE
CSAP_MAT_BOM_ITEM_SELECT
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_MAT_BOM_READ
CSAP_MAT_BOM_SELECT
CSAP_ORD_BOM_CREATE
CSAP_ORD_BOM_DELETE
CSAP_ORD_BOM_ITEM_SELECT
CSAP_ORD_BOM_MAINTAIN
CSAP_STOCK_TYPE_CREATE
CSAP_STOCK_TYPE_DELETE
try out these BOMs
regards
prabhu -
Tell me the function module name
Hi ,
By using material in MSEG table I need to get BOM field from MAST table. Then using that BOM I have to retrieve BMENG from STKO table and POSTP (item category) in STOP table and here I need to search table STPO with BOM#; retrieve component quantity from field STPO/MENGE for all materials with Item category N
I can do the above things by using select for all entries
But One function module is there to do all these things..
Can any one tell me the function module name
Thanks,
Navaneethcheck this BOM related
CSAP_BOM_ITEM_MAINTAIN
CSAP_DOC_BOM_CREATE
CSAP_DOC_BOM_DELETE
CSAP_DOC_BOM_ITEM_SELECT
CSAP_DOC_BOM_MAINTAIN
CSAP_DOC_BOM_READ
CSAP_MAT_BOM_ALLOC_CREATE
CSAP_MAT_BOM_ALLOC_DELETE
CSAP_MAT_BOM_CLOSE
CSAP_MAT_BOM_CREATE
CSAP_MAT_BOM_DELETE
CSAP_MAT_BOM_ITEM_SELECT
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_MAT_BOM_READ
CSAP_MAT_BOM_SELECT
CSAP_ORD_BOM_CREATE
CSAP_ORD_BOM_DELETE
CSAP_ORD_BOM_ITEM_SELECT
CSAP_ORD_BOM_MAINTAIN
CSAP_STOCK_TYPE_CREATE
CSAP_STOCK_TYPE_DELETE
CAVC_I_CHANGE_BOM_ITEM_DATA
CAVC_I_DELETE_BOM_ITEM
Check Above function modules which all related to BOM
And also Check function groups CSAP, CSAI, CSAR, CSBD etc...
Check out the following:
http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
regards,
prabhu
reward if it is useful -
CSAP_MAT_BOM_MAINTAIN does not delete BOM
Hi Friends,
FM CSAP_MAT_BOM_MAINTAIN does not delete BOM when we use DELETE_IND = X
in STKO_API01 in import parameters of this FM. Do you have any idea ?
Regards,
GauravHi,
you should use instead CSAP_MAT_BOM_DELETE.
Regards,
Andrea -
Delete material bom from ECO.
Hi,
I need to delete material bom from eco .
thanks,
Aviva.Hi
please check
CSAP_MAT_BOM_DELETE
FM to Delete material from BOM
Regards
Sujit -
I used the CSAP_MAT_BOM_DELETE function module to delete / expire the BOM.
Is there a way to "undelete" a BOM?
If I have deleted the BOM with a Change number which sets the BOM items to expired, can I re-vitalize the BOM items again?
I cannot seem to find an SAP function module to do this.
Does anyone know how this can be done, if at all?
Thanks for your input.
FredHi Fred,
you can try to uncheck flag to '' if at all any field was set to 'D' after u delete/expire BOM
Theja.
Maybe you are looking for
-
PO outbound message control - Condition record / PO IDOC outbound user exit
Guys, I have a system with PO outbound message control sending PO idocs to a unique plant that is set up as a customer in the partner profile. I am using a custom message type and RSEOUT00 to send my idocs with custom message type to this plant. This
-
Quickly create 8 minute highest quality DVD with no menus from Motion 4?
What's the fastest/simplest way to create a high quality DVD without any menus that just plays from Motion 4? I set quality to best. I just tried using Share, and I can see one of my processors working at 100%, but I've got no indication of any progr
-
When will LabVIEW Drop Support for the NXT?
We currently use LabVIEW to program LEGO NXT kits in our engineering courses. However, LEGO is phasing out the NXT within the next year or two. Does anyone know the LabVIEW/NXT life cycle plan, i.e., when will LabVIEW no longer support the NXT plat
-
Hi, We had availability reporting requirement that need to be delivered for a list of key servers. I created a group with these key servers as its members and started reporting on these servers. I was surprised to see the no. of servers in the report
-
Freezing Mac after trying to upgrade to Yosemite
Those are the screens I will still be getting and spend 4 times with Apple-support chat, restarted with command,option,P,R and still the same.