!csComponentDataNotFound, when enabling a custom compoent in UCM 11g.

Hi,
I am seeing following exception when enabling custom component in UCM 11g (through component manager). Any pointers on what could be the issue.
intradoc.common.ServiceException: !csComponentDataNotFound, DV_Eloqua
After enabling when i restart the server, i don't see this exception again and in the component manager the component looks enabled.
Logs are not clear on what is causing this. Can i Ignore this?
Thanks in advance,
Seshan K.

Hi,
I see this issue with install of all the custom components. The exception I pasted in previous post was just one of the many.
To give you some back ground,
This was done as part of migration effort from UCM 10gR3 to UCM 11g.
There custom components were developed for UCM 10gR3, we have updated the code to use RIDC and  as part of migration to 11g.
Custom components were then installed to 11g using component manager.
This issue is not see in of the component installed, even that component was migrated from 10gR3.
Thanks and Regards,
Seshan K.

Similar Messages

  • Custom Service in UCM 11g - Can't find proper .jar files

    Hi,
    I'm trying to migrate some custom services I created in 10gr3 into the new 11g platform. The services contain some custom java methods that I'd compiled for the older version using the server\shared\classes\server.zip package.
    It seems that the structure of the new UCM has changed somewhat - I've found a package in 11g at ucm\cs\weblayout\common\idcapplet.jar which looks to contain some of the classes, but not all of them. Specifically, it doesn't have the not the intradoc.server or intadoc.provider packages that I need to extend the Service and ServiceHandler classes.
    Does anyone know where these packages are kept in 11g, or if they even still exist in the new architecture?
    Sorry if I've missed some key information, feel free to ask. Thanks in advance!

    Hi
    I think there is a jar file with name IdcServer.jar that shows up as being loaded right at the beginning of CS startup for 11g and I guess this is the file that contains all the classes needed for CS . I am not sure about this but it seems to be the one that you are looking out for .
    Let me know if that is the case.
    Thanks
    Srinath

  • How a custom component is called when we install a custom component in UCM.

    How a custom component is called when we install a custom component in UCM.
    On what event the component services will be activated and called.
    Suppose i create a Custom service name MULTIPLECHECKIN then this service will be called on what event and where it will be defined to call.

    Saurabh,
    the code is packed in the component (see component\Security Filter\java\Security Filter\ModifyAttributesFilter.java - the first Security Filter is the component name, the other Security Filter is the Java package name).
    What is important:
    - your class must implement the FilterImplementor interface (you will need UCM standard classes - server.zip in your classpath) and its doFilter method
    How the filter is executed?
    - actually, in this case you don't need any new service - you can use the standard 'hook', which is provided by standard checkin services
    - in Component Wizard create a new component, add your compiled class to it (make sure you follow the rules not to end up in classpath issues)
    - in Component Wizard click the 'Java Code' tab. Here you can add a Custom filter called validateCheckinData, which is executed by standard checkin services. If you parametrize the filter to call your class created above, you are done.
    'Working with Content Components' manual (e.g. here: http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/using_components_10en.pdf) can give you a basic picture. A better resource is Bex Huff's book - I would recommend you to get it, because it has a step-by-step HelloWorld example which can guide you through Component Wizard. I could also send you my own component (send me an email at [email protected]) which implements a filter for user quotas, so you just need to "replace classes".
    As for the other half of your task, searching for the file in the database server will work only if you use database as your storage (ie. install and configure File Store Provider component accordingly). Of course, you could do a search for file in this case - just consider that you will be comparing two BLOBs rather than two relatively short check-sums (most likely strings or arrays of bytes). Besides, it will not work if you use filesystem as your storage.
    Jiri

  • Error when reassigning a custom task process

    Hello!
    I have an error when reassigning a custom task process.
    That is what I see at the workflow history: Task assigned to xxx was delegated by xxx. Coments: xxx
    However in the second line of the history an error is shown with the following information:
    Event type: error
    User ID: System account
    Description: An error has occurred in nameofthetask
    No new task is created for the user who the task was reassigned to.
    Any help would be appreciated

    Hi，
    From the error message， I
    guess that you come across an OOTB Approval
    Workflow.
    When you define your workflow, there is a section "Enable content Approval Workflow Activities", where you can check "Update the approval status after the workflow is completed (use
    this workflow to control content approval)". If you check this option, and you do not have content approval enabled on the library level, you get the system account error message. If you do not check it, everything works fine.
    Or you can go to the document library settings and go to Versioning Settings Page, set "Require content approval for submitted items to?" to yes and everything should be fine.
    Refer to  the following blogs about the similar issue:
    http://mossnwss.blogspot.com/2008/10/workflow-error-system-account-error-has.html
    https://sharepointtechs.wordpress.com/2011/11/18/workflow-error-an-error-has-occurred-in-approval/
    Besides, here is a similar post, you can use as a reference:
    https://social.msdn.microsoft.com/Forums/en-US/fff5ee1f-904b-4a95-989f-c5a079cdf666/workflow-error-system-account-an-error-has-occured-after-workflow-completed-moss-2007?forum=sharepointcustomizationlegacy
    Best Regards，
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • When to use Custom Adapter, Event Beans and Spring beans

    Hi,
    I have basic question on when or on what basis/scenario the Custom Adapter, Event Beans or Spring beans should be used.
    All three has same implementation methods.
    Please help me in understanding when to use Custom Adapters, Event Beans or Spring beans.
    Thanks,
    Sri
    Edited by: 897694 on Mar 7, 2012 8:12 AM

    custom adapters:
    you have to use a custom adapter when you don't find any adapter in ocep which will serve your purpose.
    Most of the times you use an adapter to connect the application with external things like http server, etc It can be both to listen the events or to send the events outside.
    Event Beans:
    This type of beans does most of the work that an adapter code does but in convention beans are not used to connect the application with external stuff
    You can use Beans as event sink etc In this case using an using an adapter is not suggestable.
    If you implement Interfaces like Initializing Bean for an adapter code it won't work properly, you have to use an event Bean in that case.
    Spring beans:
    Spring beans are used when the bean code doesn't implement EventSink or EventSender.
    These beans are used to enable something (eg: make ${wlevs_dev_home}/abc/a/b.java this path is not understandable by java code unless you override the path using a spring bean)
    Most of the things which doesn't need a connection between components in the application (eg cache loader: you can do this using spring beans and event beans both but spring beans doesn't need a connection with cache)
    Hope this small writeup helps you :)
    Edited by: Patha on Mar 8, 2012 9:10 AM

  • Enabling a customer info type for fast entry

    I would like to enable a customer info type, info type in the 9000 range, for fast entry. Your assistance in this regard will be greatly appreciated.

    Hi Mark
    Thanks for your help in this forum, as always.
    I was able to add the new contact type to the table from SM30 but as mentioned in my original question, the contacts created using this new contact type is not editable. When a business user opens the work item at a later day and wishes to update the contact, the change button is not appearing against these contacts. We can see the change button against every other item which were created using the SAP delivered options.
    I was wondering if there is any other table where we can maintain an entry to make this editable.

  • SSO Enabling a custom application with OAM

    Hi All !
    Am a bit stuck on a problem and need some urgent help. Actually we are trying to launch some custom-built (J2EE/.NET) web applications from the Oracle Portal with SSO i.e. once the user logs into the portal he would not have to log-in again to the applications which would be launched from the portal home page.
    We have successfully integrated the Oracle Portal with the OAM SSO, but facing some problems with SSO enabling the custom applications. Any help on what should be the ideal integration architecture and approach for SSO enabling the apps with minimum amount of modification of the application code.
    The licenses are available for OID, OVD, OAM.
    Thanks in advance. Any views/comments/links to useful material appreciated.
    Cheers
    Soumak

    If your custom application uses its own database for Authentication, then you have to modify the login process for your application. i.e. you have to trust the OAM to have done the authentication and then create any custom cookie that your application might use in its landing page.
    I am assuming that your custom application have some way of tracking if the user has logged in or not. You can protect the Custom application URL within OAM and once the user has logged in you can then generate your custom application cookie.
    Even if you use OVD, you stil have to modify login process in your custom appliation to trust the third party to have done the authentication.
    Thanks
    Ram

  • TS3048 Is there a way to "calibrate" the magic mouse? I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled.

    Is there a way to "calibrate" the magic mouse? Batteries are good. I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled-flashing between the app I am in and launchpad. When right-click is enabled I have to go to the extreme upper left of mousepad to click or it is interpreted as right-click. Won't consistently "scroll". Suggestions?

    Here's some things you could try....
    Reset your computer's PRAM
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Mac OS X: Starting up in Safe Mode
    http://support.apple.com/kb/HT1455

  • When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the SearchText and IF statements that change the URL depending on what is typed?

    When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the searchTerms and IF statements that change the URL depending on the searchTerms? Every time I try to add something firefox doesn't want to add it as a search plugin. I need to create a more powerful search tool for personal use.

    I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

  • How to find out when 'enable secret' and username secret' was set/changed

    Hi,
    I was wondering if it is possible to find out when 'enable secret' and username secret' was set or changed last time on an IOS based machine.
    Is there any show command or kind of timestamp or MIB which can be read out?
    tnx Ralf

    Probably your syslog server would give you that info.

  • Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos.

    Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos. When I turn off photo stream on iCloud preferences the memory is freed up. I like to be able to access my icloud photo streams on
    my macbook but it has a small Hardrive and loosing that much space is annoying and it kind of voids the point of photo streams. Is there a way I can stop
    this ?

    Is there a way I can stop
    this ?
    No, Photo Stream is syncing with iCloud. The most recent 1000 photos in iCloud will be buffered on your mac, even if you do not import them to your photo library, if you enable My Photo Stream.
    See this link:   iCloud: Photo Stream FAQ
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.

  • In the shared variable properties box, when enabling aliasing, what is the difference between binding to a project variable vs. to a psp url

    In the shared variable properties box, specifically with regard to a the target being an rt target, when enabling aliasing, what is the difference between binding to a project variable vs. to a psp url?

    The difference is in the type of variable you are binding it to.  A project variable is a variable that lives within the specific project in which it was created.  A PSP URL is an address using the Publish-Subscribe Protocol (PSP).  You can learn more about PSP URLs here: http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/using_datasocket_technology/#Specifyin...
    PSP URLs will enable it to communicate between different machines and also between projects which may or may not be open.  The project variable will exist within the project.
    Julian R.
    Applications Engineer
    National Instruments

  • Gett 403 error code when trying to access UCM 11g from Admin console -- deployment

    We have deployed UCM 11g in cluster mode. When I test the application via the admin conssole --> deployment --> UCM.   I can access  UCM only on one member of the cluster.  The other member gives me a 403 error code.. 

    Please, take a look at https://blogs.oracle.com/proactivesupportWCC/entry/clustering_and_high_availability_for (and contact the support group as advised)

  • Labview freeze when accessing a custom menu with data on the clipboard

    This one has got me stumped:  When selecting a custom menu item with data on the clipboard the GUI freezes.  Freezes are longer for more data and longer for older versions of Labview.  I wrote the test code, attached, but the example "Menu Selection Demo.vi" shows the same behavior.
    Running Labview 2011 here are some freeze delays for my laptop (a bit slower machine) with various amounts of text data on the clipboard:
    Clipboard size        Delay
    1.3MB                   2.1 sec
    2.6MB                   4.9 sec
    3.8MB                   17.2 sec
    14MB                    253.3 sec
    The delay appears to be non-linear.  A doubling of the clipboard data size more than doubles the delay and a tripling of the clipboard data size produces a delay of almost 10X!  Things are also much, much worse on my ancient version 8.2.1 (over a 40 second freeze for 1.3MB and it goes up from there).
    Note that the freeze also occurs on programs with a custom menu when exiting.  This would seem to suggest it might have something to do with the timeout, but why timeout should vary with clipboard size and not with the value wired to it makes this feel even more like a bug in the custom menu functionality.
    This seems to be related to known issues in Labview 2011 #39604 49UBP4LE (http://www.ni.com/white-paper/13168/en#39604_by_Da​te) that was first reported in version 8.2.1.  This known issue relates to Labview freezing when large amounts of data are copied from Labview to the clipboard.  No fix has been implemented since this was originally reported in 2007.
    This freeze also occurs when shortcuts to menu items (such as Ctrl + L) are used when large amounts of data are on the clip board.
    Thus far this has been 100% repeatable and I have not been able to find a way around it.  I also haven't found anything else similar on the forums or on the web.  It appears to be a GUI freeze with Labview still running in the background, which is also odd.
    My work-arounds at this point are either to not use the clipboard (bad), programatically clear the clipboard several times each second (worse) or remove all custom menu functionality and replace those functions with onscreen controls.  So, for now, I'm removing custom menu items because my users need the clipboard and I can't have massive delays making my data acquisition code look crashed.
    Any ideas would be helpful.  This one has me scratching my head...
    Attachments:
    Menu_Clipboard_Lv2011.vi ‏17 KB

    Well, doing Microsoft Word, Excel and what else on a computer that is used to run an important production test, is a very bad idea. There is no way that you can guarantee, that one of these applications is not causing some interruption to the currently running time critical task. Word and Excel and just about any other computer application can crash, lock up the computer or eat your breakfast while you are doing seemingly harmless things.
    The issue with the clipboard in LabVIEW is indeed a problem that exists for a long time and I hope they fix it sometime, but the fact remains, that you should NEVER use a computer for other tasks while you run a test or other manufacturing related application on it, when a failure of that application can cost you more than a few pennies.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • MRP_ATP_PUB.Call_ATP api not retrieving requested_date_quantity value when executed in custom schema but when executed in apps its working fine, can anyone help on this..

    The MRP_ATP_PUB.Call_ATP api not retrieving requested_date_quantity value when executed in custom schema but when executed in apps its working fine, can anyone help on this..
    We are passing the required values to the ATP API.
    1) The x_return_status is showing as 'S' i.e. success but x_atp_rec.Requested_Date_Quantity is not returning any value.
    2) If there is a grant issue how to identify it.
    Regards,
        Vinod Annukaran

    Pl do not post duplicates -0 MRP_ATP_PUB.Call_ATP api not retrieving requested_date_quantity value when executed in custom schema but when executed in apps its working fine, can anyone help on this..

Maybe you are looking for