CSCuo82087 - Policy Trace does not work in 8.0 for authenticated users

solution to this problem exists ?

Relating line numbers in compile errors to source code.
Oracle does not count blank lines in line numbers. Commenting
with "--" blank lines or deleting blank lines will make the line
counter more accurate.
Oracle counts comments delimited with /*...*/ as one line, no
matter how many lines are in the source code. Using only "--"
will make the line counter more accurate.
Oracle does not count lines before the PL/SQL block DECLARE when
compiling triggers. (CREATE ... TRIGGER....FOR EACH...WHEN(...))
parts of the syntax are not counted. The line in the source
code with the DECLARE of the trigger's PL/SQL block will be line
1.
Hint: Avoid uncertainty. Use "SHO ERR TRIGGER <trigger_name>"
when looking at compile problems.
Good Luck....

Similar Messages

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

    I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

    Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
    Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
    So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
    I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
    Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
    I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
    This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
    creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
    so it is completely unresponsive.
    I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
    I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
    Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
    may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
    but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
    I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
    I've found that Mac just doesn't play nice with some programs at all.
    And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
    I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
    Please advise if you found a resolution and what it was.
    Thanks

  • TS3988 Each time I log into iCloud, I check, Keep me logged in, but this does not work.  I have to reenter user name etc each time I try to go back to my iCloud account.

    Each time I log into iCloud, I check, Keep me logged in, but this does not work.  I have to reenter user name and password etc each time I try to go back to my iCloud account.

    Hi,
    In Keychain Access app in the Menu for the App is Keychain First Aid.
    If you open this is the tick box for Synchronising the Login password with the so called Login Keychain ticked ?
    9:49 pm      Monday; March 16, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

    there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

    Battery does not appear to charge
    Important: iPod touch cannot be charged with a FireWire-based power source.
    Verify that the power source being used is working properly.
    If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
    Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
    Try another USB port.
    Try charging from a USB charger if available.
    If that does not help, try another USB cable if available.
    Learn more about charging the battery.
    The Home button isn't working
    Put the iPod Touch to sleep.
    Wait a couple of seconds.
    Press the Home button.
    iPod Touch should wake up.
    If iPod Touch does not wake up, then iPod Touch should be serviced.
    Resources for Service
    http://support.apple.com/kb/he57
    https://selfsolve.apple.com

  • Host admin page does not work after insatlling YAST for suse9

    I am using 10205 grid and when I try to go to admin tab in grid it say YAST patch needs to be installed which I did but still it does not work.
    Anyone having same issue and how to resolve this. I also followed the metaling note for this issue which was a workaround for a bug but still it did not work.
    Any ideas?
    Thanks in advance.

    I clicked on the link that was provided on the GC host admin page and downloaded the patch and as root applied it to the server without any errors. The following are the steps:
    When I go the host page then administration tab it says the following:
    Install the SUSE patch for YAST from http://oss.oracle.com/projects/yast
    Downloaded the patch yast-EM-1.7.0-0.1.noarch.rpm
    I've installed the patch and restarted the agent and the permissions on all the files are set to 755 according to note
    414438.1
    after applying the YAST patch I clicked finish and nothing happens. I've restarted ther OMS as well but no effect. I was wondering if anyone else having the issue?

  • Lead Selection does not work after setting filter for ALV.

    Hi, Can you please suggest on below scenario :
    I have a Node with a sub node in it .
    I am using the supply function on Sub Node to retrieve the date based on Parent Node.
    There are two ALV's to display parent and item data. The issue is when a filter(user defined filter) is done on Parent table, the supply function does not work. The value is that of the selected row before setting the filter. Even after removing the filter, the item data is stuck and does not change on Lead Selection.
    One thing I noticed is if the child table is a table UI, there is no issue. The only problem is when the second table is ALV
    Thanks In Advance

    Hi Prashanthi,
    Your issue can be resolved as below
    Create an event handler method 'set_alv_data'  for the event 'ON_LEAD_SELECT' of parent alv
    Write the below code inside the event handler method
    METHOD set_alv_data.
      DATA lo_node TYPE REF TO if_wd_context_node.
      DATA lv_path TYPE string.
      DATA lv_index TYPE string.
      lv_index = r_param->index.
      CONDENSE lv_index.
      CONCATENATE wd_this->wdctx_my_parent_node
      lv_index
      wd_this->wdctx_my_child_node
      INTO lv_path SEPARATED BY '.'.
      lo_node = wd_context->path_get_node(
          path                          = lv_path
      DATA lo_interface TYPE REF TO iwci_salv_wd_table.
      lo_interface = wd_this->wd_cpifc_alv_child( ). "get the ref of alv comp of child
      lo_interface->set_data(
        EXPORTING
    *    only_if_new_descr =
          r_node_data       = lo_node
    ENDMETHOD.
    The above code sets the data node of child alv based on lead selection of parent alv data.
    Note: Replace 'parent_node', 'child_node'  with your nodes & 'alv_child' with your alv component name of child alv.
    If you want to control the data of child alv on filter function, you can use the event ON_STD_FUNCTION_AFTE and once you define the filter you get the r_param->id = 'SALV_WD_FILTER_DEFINE'  & now you can clear data of child alv.
    Hope this helps you.
    Regards,
    Rama

  • Wireless net does not work after installing SP1 for Vista - Error code 10

    After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
    Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
    Any one else has the same problem?

    I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

  • Since last update anything on the first three lines of a web page if it has a a button to click on to go to another page does not work. use Google Crome for fo

    Loging onto my bank I go to the barclays pege there on the top line is "log in" it used to work when I click on it but has stoped, any button on the first three lines of a web page does not work.
    I now use Google crome but would like to stay with Firefox if this coruption can be sorted.
    Rod

    Please reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    See if this helps solve the issues you had and please report back to us!

  • EPrint does not work with Google Apps for Business (hosted email)

    I have looked up numerous posts, from back into 2011 even, and HP still has not resolved this.
    HP's ePrint does not work with companies using Google Apps for Business (hosted email).
    Our emails come from our domain, but from the servers/DNS of Google, so we wind up getting
    the "550 5.7.1 Command Rehected" error.
    This is a major issue as more and more companies (especially small business owners) are moving away
    from having in-house/Exchange servers, and they are moving toward hosted systems.
    You really need to find a way to stop rejecting emails coming from Google Apps hosted email.
    It's been around 4 years now (looking at previous posts). Why hasn't HP found a resolution to this yet?

    I have brought your issue to the attention of an appropriate team within HP.
    They will likely request information from you in order to look up your case details or product serial number.
    Please look for a private message from an identified HP contact.
    Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Continue button does not work in content player for user on XP system

    "Continue" or "Here" buttons does not work in "My Learning" content player for users on XP unlike for users on windows 2007 works fine. Pls let me know if XP needs to be on certain java version to work. we are on LSOFE 604.Java 1.6_21, IE8.
    Pls let me know why user on windows 7 don't have any issues completing the course in ESS thru content player and only XP users have issues.
    Thanks in advance.

    Nicklas,
    Check the link below. Maybe it will help.
    http://discussions.apple.com/thread.jspa?threadID=2672794&tstart=30

  • Since I have updated IOS 6 my mail does not work, it keeps telling me my user name and password is incorrect.

    Since I have updated my iPad to iOS 6 my mail will not work, so I deleted my account and added a
    New, now it says my username and password is incorrect.  But my username and password are correct.
    Does anybody have a solution?

    May be something here.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Find not working in GW 7 for one user

    The Find option does not show any results for one user. It works on Archived items. The user does have 14,000 sent items alone. Any step to take to fix this issue without having to recreate their account. Ran an analyse/fix and structural rebuild that didn't work.

    You could try going into the Display Properties of any folder, select the
    Find Results entry from the list and press Delete. Sometimes that entry
    can get corrupted and needs to be recreated, which will happen next time
    you run a Find.
    Cheers Dave
    Dave Parkes [NSCS]
    Occasionally resident at http://support-forums.novell.com/

  • Firefox does not remembe the login name for the user login name on secure sites.

    My user got a new computer and I installed the latest version of firefox. It no longer remembers user names on secure sites and the employee does not like the fact that she has to type in her user name every time she needs to log into the site. The browser is set to automatically save user names and passwords.

    Please first update your plugins, Flash has a new version.
    Does this happen in Safe Mode?
    *[[Troubleshoot Firefox issues using Safe Mode]]
    First troubleshooting steps are:
    *[[Control whether Firefox automatically fills in forms]]
    It is also possible to check the saved passwords to make sure that the information is saved. On an https site that does not autofill the information for logging in , the username is blank. I removed the entry by right cicking on the page, selecting "Page Info" and under "Security" viewing the saved passwords.

  • RSS Feed not working in chrome browser for anonymous users but working fine in IE

    HI All,
    We are having public facing site for anonymous users. We have created links for OOTB RSS feed for lists and libraries. The link is working fine in IE, but for chrome it is asking for credentials. We are using publishing site. Any idea or pointers is much
    appreciated. We are in testing phase and this issue sticking us.
    Rohit Pasrija

    Hi,
    According to your description, my understanding is that you want anonymous user access RSS feed link without asking for credentials.
    I suggest you can check if you have deactived the “Limited-access user permission lockdown mode” feature in the site settings-> site collection features
    In my environment ,after disabling the feature, then the rss feed link will be accessed without credentials for anonymous users in Chrome.
    Thanks
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

Maybe you are looking for