CSM : How to display state transitions ?

Hi,
Is there any way on the CSM to monitor the number of state transitions for real servers and virtual servers (like the show summary command on the CSS)? I don't find any information in the detail output of "show mod csm x real detail" or "show mod csm x vserver detail"
Thank you,
Yves Haemmerli

Yves,
there is no counter tracking this info.
The CSM will log a message when a server goes down or up. You could save them on a syslog device and use a script to count transitions.
A CSM command to use to detect if there was probe failures is 'sho mod csm X tech probe'. It counts total of probe [not per real] so.
Gilles.

Similar Messages

CSM to GSS via KAL-AP: How to display vserver transitions ?

Hi,
I need to know how much time a CSM sent an Offline status for a VIP (vserver) to the GSS via KAL-AP. In other words, I want to see how match time a specific VIP reported a load = 255 to the GSS, because all real servers in the farm were unavailable or overloaded. With the command "show module csm 1 vserver name <Name>, I don't see this counter :
PORTAL-PROD, type = SLB, state = OPERATIONAL, v_index = 30
virtual = 160.213.139.14/32:26000 bidir, TCP, service = NONE, advertise = FALSE
idle = 3600, replicate csrp = connection, vlan = ALL, pending = 30, layer 7
max parse len = 4000, persist rebalance = TRUE
ssl sticky offset = 0, length = 32
conns = 0, total conns = 87
Domains:
PORTAL-PROD
Is there another way to display this value on the CLI ?
Thank you
Yves Haemmerli

I am reposting this question, because I am investigating why the GSS shows VIP transitions via KAL-AP, while there is no real servers failures...So, I would like to see a VIP (vserver) transitions counter on the CSM, in order to coorelate what the GSS says.
Thank you for any hints,
Yves Haemmerli

How to display the form of time statement, which was created in trans. PE50

Hi to all!
I have created the salary statement with the PE50 and I want the form to be displayed in the ESS.
How to display this form?
Thank.

Dear Siddharth,
I am getting this error for Time Statement here also we have used PE50 to create time statement for r/3 purpose, Which would be feasible one to work with for getting the display of Time Statement.
Form TH_TIME_ST does not exist
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form TH_TIME_ST does not exist
     at java.lang.Throwable.<init>(Throwable.java:194)
     at java.lang.Error.<init>(Error.java:49)
     at com.sap.pcuigp.xssfpm.java.FPMRuntimeException.<init>(FPMRuntimeException.java:34)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:357)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.tim.per.selection.VcTimPerSelection.onInit(VcTimPerSelection.java:238)
     at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelection.onInit(InternalVcTimPerSelection.java:246)
     at com.sap.xss.hr.tim.per.selection.VcTimPerSelectionInterface.onInit(VcTimPerSelectionInterface.java:162)
     at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelectionInterface.onInit(InternalVcTimPerSelectionInterface.java:144)
     at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelectionInterface$External.onInit(InternalVcTimPerSelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:467)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:359)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:755)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:278)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:722)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:623)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:215)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:113)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:70)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:818)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1265)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:750)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:715)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:113)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:107)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:278)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:623)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:215)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:113)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:60)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:101)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Appreciate your help on this.
Regs,
Raj

How to display number of rows as columns in a select statement? This is on

How to display number of rows as columns in a select statement? This is on 10g R2.
Thanks,
R

For the current (ie. row 1 of 100)
row_number over (order by -pick_a_column_set) as rnfor the total number of columns returned in your query
count(*) over() as total_count

Please Help::How to display a Map with LIsts as Keys and Values using JSTL

Hi,
I need some assistance on how to display a Map in JSP using struts or core JSTL. I have a HashMap which has a List of keys and each key maps to a value of an ArrayList.i.e I have an ArrayList of taxCodes and each taxCode maps to a value of taxDetails which is an ArrayList of details for for that particular taxCode. I have some trouble to display each taxCode then display taxDetails for each taxCode. Here is my code below:
OrderDetails.java
package orderitems;
import java.sql.*;
import java.util.*;
public class OrderDetails {
    private LineOder lineOrder;
    private Map lineItems;
    //returns an item number, key_item, from its unique keys
    public int getItemNumber(int key_item, String key_year,
            String key_office,String key_client,String key_company){
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        int itmNum = 0;
         * key_item a unique number for an item.
         * key_year,key_office,key_client,key_company unique keys
         * for each order where this key_item is taken
         * from.
        String select = "SELECT key_item FROM "+
                Constants.WEB_TABLE +" WHERE key_item = " + key_item +
                " AND key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company +"'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            if(rst.next()){
                itmNum = Integer.parseInt(rst.getString("key_item"));
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itmNum;
    //get a list of item number(item codes)
    public List getAllItemNumbers(String key_year,
            String key_office,String key_client,String key_company){
        List itemNumbers = new ArrayList();
        LineItem itemNumber = null;
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        String select = "SELECT key_item FROM "+ Constants.WEB_TABLE +
                " WHERE key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company + "'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                itemNumber = new LineItem();
                itemNumber.setKey_item(Integer.parseInt(rst.getString("key_item")));
                itemNumbers.add(itemNumber);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itemNumbers;
    //get a list of tax codes
    public List getAllTaxCodes(int key_item, String key_year,
            String key_office,String key_client,String key_company){
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        ItemTax taxCode;
        List taxCodes = new ArrayList();
        int itemNum = getItemNumber(key_item, key_year,
                key_office,key_client,key_company);
        String select = "SELECT key_tax_code FROM "+
                Constants.WEB_TABLE +" WHERE key_item = " + itemNum +
                " AND key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company +"'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                taxCode = new ItemTax();
                taxCode.setKey_tax_code(rst.getString("key_tax_code"));
                taxCodes.add(taxCode);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return taxCodes;
    /////This methode returns a Map which am trying to display in JSP
    //use tax code to get tax details
    public Map getItemTaxDetails(String key_year,String key_office,
            String key_client,String key_company,int key_item){
        ItemTax taxDetail = null;
        List taxDetails = new ArrayList();
        List itemTaxCodes = new ArrayList();
        Map itemTaxDetails = new HashMap();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //get a list of all tax codes of an item with a
        //given item number
        itemTaxCodes = getAllTaxCodes(key_item,key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator taxCodeIter= itemTaxCodes.iterator(); taxCodeIter.hasNext();){
                ItemTax itemTaxCode = (ItemTax)taxCodeIter.next();
                String taxCode = itemTaxCode.getKey_tax_code();
                String select = "SELECT tax_type,tax_value," +
                        "tax_limit_val FROM "+ Constants.WEB_TABLE +
                        " WHERE key_item = "+ key_item +
                        " AND key_year = '" + key_year + "'" +
                        " AND key_office = '" + key_office + "'" +
                        " AND key_client = '" + key_client + "'" +
                        " AND key_company = '" + key_company +"'" +
                        " AND key_tax_code = '" + taxCode + "'";
                rst = stat.executeQuery(select);
                while(rst.next()){
                    taxDetail = new ItemTax();
                    //records to be displayed only
                    taxDetail.setKey_item(Integer.parseInt(rst.getString("key_item")));
                    taxDetail.setTax_value(rst.getString("tax_value"));
                    taxDetail.setTax_limit_val(Float.parseFloat(rst.getString("tax_limit_val")));
                    //////other details records ommited//////////////////////////
                    taxDetails.add(taxDetail);////An ArrayList of taxDetails for each taxCode
                 * A HashMap which has all taxCodes of an item as its keys
                 * and an ArrayList of taxdetails as its values.
                 * I return this for display in a JSP.
                itemTaxDetails.put(taxCode,taxDetails);
            System.out.println();
            System.out.println("*********CONSOLE OUTPUT*************");//display on console
            Set set = itemTaxDetails.keySet();
            Iterator iter = set.iterator();
            System.out.println("Key\t\tValue\r\n");
            while (iter.hasNext()) {
                Object taxCode=iter.next();
                Object details=itemTaxDetails.get(taxCode);
                System.out.println(taxCode +"\t" + details);
            System.out.println("************************************");
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itemTaxDetails;
    //details of an item with all its taxes
    public List getAllItemDetails(String key_year,
            String key_office,String key_client,String key_company){
        List lineItems = new ArrayList();
        List itemNumbers = new ArrayList();
        Map taxDetails = new HashMap();
        LineItem item = null;
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //A list of all item numbers in the declaration
        itemNumbers = getAllItemNumbers(key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator itemIter= itemNumbers.iterator(); itemIter.hasNext();){
                LineItem itemNum = (LineItem)itemIter.next();
                int itemNumber = itemNum.getKey_item();
                String select = "SELECT item_description,item_mass," +
                        "item_cost" +
                        " FROM " + Constants.WEB_TABLE +
                        " WHERE key_year = '"+key_year+"'" +
                        " AND key_office = '"+key_office+ "'"+
                        " AND key_client = '"+key_client+ "'"+
                        " AND key_company = '"+key_company+ "'"+
                        " AND key_item = " + itemNumber;
                rst = stat.executeQuery(select);
                while(rst.next()){
                    item = new LineItem();
                    item.setItem_description(rst.getString("item_description"));
                    item.setItem_mass(Float.parseFloat(rst.getString("item_mass")));
                    item.setKey_item(Integer.parseInt(rst.getString("item_cost")));
                    //////other details records ommited//////////////////////////
                    /* A HashMap of all itemTaxeCodes as its keys and an
                     * ArrayList of itemTaxedetails as its values
                    taxDetails = getItemTaxDetails(item.getKey_year(),item.getKey_office(),
                            item.getKey_client(),item.getKey_company(),item.getKey_item());
                    //item tax details
                    item.setItmTaxes(taxDetails);
                    //list of items with tax details
                    lineItems.add(item);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return lineItems;
    public Set getOrders(String key_year,String key_office,
            String key_client,String key_company){
        List lineItems = new ArrayList();
        Set lineOrders = new HashSet();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        LineOder lineOrder = null;
        String select = "SELECT * FROM " + Constants.WEB_TABLE +
                " WHERE key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company + "'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                lineOrder = new LineOder();
                lineOrder.setKey_year(rst.getString("key_year"));
                lineOrder.setKey_office(rst.getString("key_office"));
                lineOrder.setKey_client(rst.getString("key_client"));
                lineOrder.setKey_company(rst.getString("key_company"));
                ////list of items with all their details
                lineItems = getAllItemDetails(lineOrder.getKey_year(),lineOrder.getKey_office(),
                        lineOrder.getKey_client(),lineOrder.getKey_company());
                //setting item details
                lineOrder.setItems(lineItems);
                //a list of order with all details
                lineOrders.add(lineOrder);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return lineOrders;
Controller.java
package orderitems;
import java.io.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Controller extends HttpServlet {
    private Map taxDetails = new HashMap();
    private OrderDetails orderDetails = null;
    protected void processRequest(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        response.setContentType("text/html;charset=UTF-8");
        String key_year = "2007";
        String key_office = "VZX00";
        String key_company = "DG20";
        String key_client = "ZI001";
        int key_item = 1;
        String nextView = "/taxdetails_list.jsp";
        orderDetails = new OrderDetails();
        taxDetails = orderDetails.getItemTaxDetails(key_year,key_office,
                key_company,key_client,key_item);
        //Store the collection objects into HTTP Request
        request.setAttribute("taxDetails", taxDetails);
        RequestDispatcher reqstDisp =
                getServletContext().getRequestDispatcher(nextView);
        reqstDisp.forward(request,response);
    protected void doGet(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        processRequest(request, response);
    protected void doPost(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        processRequest(request, response);
taxdetails_list.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <title>Simple Tax Detail Diaplay ::</title>
        <link rel="stylesheet" type="text/css" href="imgs/orders.css"/>
    </head>
    <body>
        <jsp:useBean id="taxDetails" class="java.util.HashMap" scope="request"/>
        <table>
            <c:forEach items="${taxDetails}" var="hMap">
                <tr>
                    <td><c:out value="${hMap.key}" /></td>
                    
                </tr>
            </c:forEach>
        </table>
    </body>
</html>am displaying taxCodes(in this case i have VAT and ICD) fine but cant figure out how to display a list of value for each taxCode.Here is the output am getting
both in my JSP and on the console:
*******************************CONSOLE OUTPUT****************************
Key          Value
ICD     [orderItems.ItemTax@13e6226, orderItems.ItemTax@9dca26]
VAT [orderItems.ItemTax@13e6226, orderItems.ItemTax@9dca26]
Edited by: aiEx on Oct 8, 2007 6:54 AM

hi evnafets,
yes i need a nested for loop.I have tried your advice but my bean properties are not found.Am getting this error:
javax.servlet.ServletException: Unable to find a value for "key_item" in object of class "java.lang.String" using operator "."
I have tried this as stated earlier in the post:I have tried to make the method getItemTaxDetails return a List and get the returned list value as taxDetails. I then tested to display this list on JSP and its displaying fine.
public List getItemTaxDetails(String key_year,String key_office,
            String key_client,String key_company,int key_item){
        ItemTax taxDetail = null;
        List taxDetails = new ArrayList();
        List itemTaxCodes = new ArrayList();
        Map itemTaxDetails = new HashMap();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //get a list of all tax codes of an item with a
        //given item number
        itemTaxCodes = getAllTaxCodes(key_item,key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator taxCodeIter= itemTaxCodes.iterator(); taxCodeIter.hasNext();){
                ItemTax itemTaxCode = (ItemTax)taxCodeIter.next();
                String taxCode = itemTaxCode.getKey_tax_code();
                String select = "SELECT tax_type,tax_value," +
                        "tax_limit_val FROM "+ Constants.WEB_TABLE +
                        " WHERE key_item = "+ key_item +
                        " AND key_year = '" + key_year + "'" +
                        " AND key_office = '" + key_office + "'" +
                        " AND key_client = '" + key_client + "'" +
                        " AND key_company = '" + key_company +"'" +
                        " AND key_tax_code = '" + taxCode + "'";
                rst = stat.executeQuery(select);
                while(rst.next()){
                    taxDetail = new ItemTax();
                    //records to be displayed only
                    taxDetail.setKey_item(Integer.parseInt(rst.getString("key_item")));
                    taxDetail.setTax_value(rst.getString("tax_value"));
                    taxDetail.setTax_limit_val(Float.parseFloat(rst.getString("tax_limit_val")));
                    //////other details records ommited//////////////////////////
                    taxDetails.add(taxDetail);////An ArrayList of taxDetails for each taxCode
                 * A HashMap which has all taxCodes of an item as its keys
                 * and an ArrayList of taxdetails as its values.
                 * I return this for display in a JSP.
                itemTaxDetails.put(taxCode,taxDetails);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        //return itemTaxDetails;
        return taxDetails;
    }And my JSP
taxdetails_list.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <link rel="stylesheet" type="text/css" href="imgs/orders.css"/>
    </head>
    <body>
        <table>
            <c:forEach var="curRecord" items="${taxDetails}" varStatus="rowCounter">
                    <c:choose>
                        <c:when test="${rowCounter.count % 2 == 0}">
                            <c:set var="rowStyle" scope="page" value="odd" />
                        </c:when>
                        <c:otherwise>
                            <c:set var="rowStyle" scope="page" value="even" />
                        </c:otherwise>
                    </c:choose>
                    <tr class="${rowStyle}">
                        <td>${curRecord.key_item}</td>
                        <td>${curRecord.tax_value}</td>
                        <td>${curRecord.tax_limit_val}</td>
                    </tr>
                </c:forEach>
        </table>
    </body>
</html>I can't see where am going wrong even with your advice.Please help.
Thnx.

State transitions across components?

Hi,
I've been using Catalyst for a few days now to put together a "clickable mockup" of an app. Instead of working based on a comp, I'm creating the UI in Catalyst directly, using it's built-in components and creating a "wireframe" look. Works fine. I anticipate to work with more hi-fi comps.
One thing I'm having trouble with, is making deep transitions between states from subcomponents.
Imagine this setup:
The app has two states/pages, "1" and "2". Inside each page, I have one component to represent all the states of that page. So for the first page, the internal component states would be 1-1, 1-2 and 1-3. Ditto for 2.
So, now, let's say that in state 1-3, I have a button inside the component, where I want to transition to 2-2. Currently, it appears that there is no way for me to do that. When I click on the options in "Play transition to state" of the button, it shows me states 1 and 2, as well as 1-1 through 1-3, but it does not show the "child" states of "2".
Is there any way to accomplish the transition from 1-3 to 2-2?
Another version on the same problem: let's say I can somehow get from 1-3 to 2-2. Now, inside 2-2, I have a button that jumps back to "1". Currently, when I jump to "1", it jumps to whatever state 1 was in, which is 1-3 in my case, which is undesirable. It would be nice if I could somehow reset the component state on some event (showing, hiding, ...) to its default state, so that when people later jump back to it, it would start in its default state.
I am familiar with ActionScript and XML and did poke around a bit. I see that in components, there is this kind of code:
protected function Button_click_1_1():void
    mx.core.FlexGlobals.topLevelApplication.currentState='AppHome';
I speculate that this lets me do what I need by editing code, and instead of topLevelApplication.currentState using topLevelApplication.someComponent.currentState... but I wanted to see if there is/will be another friendlier way of accomplishing this?

Hi,
Just my, hopefully helpful thoughts about how to render complex state transition much easier to understand, design and debug ...............
Perhaps, initially for coders with a solid background in conditional logic, the inclusion of one or two design windows/panels providing the ability to design and display at least state transition diagrams and preferably also state transition tables, could be very helpful when trying to either design or understand complex, inter-related state transitions - actually, even relatively simple state-transitions with only five to seven objects, each with only three or four states to track concurrently, can be difficult to design, debug and test using just a mental model and memory to retain knowledge of the desired vs. actual state transition paths.
Although I say "initially for coders", many years ago I taught both of these techniques successfully during software "design principles" courses that addressed software developers who's function was to prepare "design specifications" rather than actually write the code which, in those days, was the job of programmers rather than designers. In fact many of my students were not programmers at all - for example analysts who used state transition diagramming techniques to design functions regardless of whether those functions would become implemented as code, or as a set of human actions, or mechanical machine operations (think pinball!).
It should be possible using today's technoloy to be able to
    (a) generate code from a state transition table or a state transition diagram and
    (b) generate both forms of diagram from existing code (including the code autogenerated during visual design and
    (c) consistency check existing code automatically.
It should be possible, using state transition table and diagram functions, to highlight structural logic errors. How such highlighting should be done, for example:
    (a) using a classic state transition table or diagram or
    (b) generating some form of structured text report or
    (c) inserting colour-highlighted error messages in-line in the code or
    (c) some other more visual-designer-oriented signalling technique or
    (d) a combination of several of the above
would be a design issue for Adobe. This would not be a trivial exercise for Adobe, but the functionality would be reusable, i.e. transferable into other products.
After all, the only reason for such tables or diagrams is to render complex state transitions understandable by humans, and these two techniques have proved extremely useful for many decades in many areas of design - programming, electronic circuit design, machine design, business process design......
Re. Catalys, it's just a classic program design application, with some whizzy UI graphics that need to display, disappear, change colour, glow, shimmer, move, .... in predictable and desirable ways.
The original pinball machines used mechanical relays to implement their underlying state transition diagrams; pinball designers needed to understand at least two things (a) complex state transitions and (b) a well designed UI. From this point of view, Catalyst looks like a pinball design panel!

Triggering a state transition via time

Something that comes up often for me is the need to jump from one state to another after a certain amount
of time (as opposed to a user clicking on something).
For example, lets say you are prototyping a search interface. The sequence is:
1) The user fills in a form and clicks "Search" (state 1)
2) The UI displays a "searching" indicator for a few seconds (state 2)
3) Search Results are displayed (state 3)
Note that the user does not "click" anything to go from "state 2" to "state 3"; it happens
automatically after some specified time.
For the life of me I cannon figure out how to do this in Flash Catalyst gracefully. You can kind of fake it
my fading things in the timeline, but this seems "hacky"; also, I cannot figure out how to fade something in AND
fade something out in the same transition (to simulate state 2 above).
Any suggestions?
Thanks!
Rob

Hey! thanx for your quick reply. This really sucks.....
Date: Sun, 7 Feb 2010 11:06:28 -0700
From: [email protected]
To: [email protected]
Subject: Triggering a state transition via time
You can't do this in Catalyst; you have to add timer code in Flash Builder. And what totally sucks is that once you modify code in Flash Builder, you can't bring it back into Catalyst; it's a one way street
>

How to display database items

can anyone tell me how to display the selected contents of
the database by using a variable from my form field(like text box
)

Hello Guys!
Sorry forever to get back. Going to throw this up here quick
so I dont time out, but if you need further help post back and I
will help with specific questions.
Using the City, State example. This operation is two fold.
(a) the search page, and (b) the results page.
(a) On your search page you would have two fields. City and
State. Make sure your table that holds these fields are containted
within a form tag. (Insert > Form > Form). Also make sure
your textfields have names. You can click on the textfield to
highlight in design view and change the name from 'textfield' and
'textfield1' to 'city' and 'state'..
Highlight the form tag and in the properties panel where it
says "action" insert the URL/file of your results page. This is the
page that is actually going to display the information, then save
your work.
(b) Open up your results page, and in the bindings panel
click the "+" then select query. In the 'simple' window name your
recordset (example: rsStores) select your connection, then select
the table you desire to display results from. From this window you
can also choose a field to use as an order by. Do not use the
filter!
With this done and 'without' saving yet, click on the
"advanced" tab. You should now see and a simple statement in the
window that looks something like:
SELECT *
FROM Stores (The name 'Stores' will actually be replaced with
your table name)
Below the statement you will see 'parameters' with a + and -.
Hit the plus to add a parameter. For name use varState, for Type
use text, for Value use Request("State") and for default value use
zero. Replicate the process for varCity using Request("City") for
the value. (The requests are the same names as the names you used
to name your fields in the search form). Now go up to the original
statement and edit it to look like this:
SELECT *
FROM Stores WHERE yourfieldname = varState AND WHERE
yourfieldname = varCity
Replace 'yourfieldname' with the actual field name holding
the values. Keep EVERYTHING case sensitive. Testing in design view
will not work because there are no values yet passed. So click ok,
save the page and upload them to server. Test by going to the
search page and submitting the search form.
Hope that helps..!!

How to display special characters in APEX Classic Report column

Ref: Thread: How to display newline characters as new lines
Version: APEX 3.2
Hi,
I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
Thanks very much.
Rohi
Edited by: Rohi on 18-Jul-2012 04:21

876651 wrote:
Hi,
Thanks for your response.
I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
But it is not displayed like it should be.
I do not want the value to be displayed along with the html tags as a string.
I want the html tags to take effect and highlight the value within it.
Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
So I changed it to 'No' and and it contained the html tags.
I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
You can't pass HTML and CSS around in URL parameters.
I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
<span style="color: #&P0_HIGHLIGHT.;">Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach...

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

How to display data in Table control?

Hi Experts,
Can anyone please explain me how to display the data from two different tables(those two table is related with 1 field) into a single table control?
For Example: T1 has fields (F1,F2) and
                     T2 has fields (F3,F4) --> here F3 is foreign key for F1
I need to display the data F1,F2,F3,F4 into the table control.
Can anyone explain me?
Thanks in Advance,
Regards,
Raghu

Hi,
If F3 is foreign key for F1, then both fields will have same values. Then why do you need to display both F1 and F3? Either one of them is enough. Try the following code.
types: begin of t_table,
             F1 type T1-F1,
             F2 type T1-F2,
             F4 type T2-F4,
          end of t_table.
data: i_table type standard table of t_table with header line.
select F1 F2 F4 into table i_table from T1 inner join T2 on T1F1 = T2F3.
You should create three columns in the table control with names i_table-F1, i_table-F2, i_table-F3.
After populating the internal table, refresh the control with the following statement.
REFRESH CONTROL <NAME> FROM SCREEN <SCREEN_NO>.
All the above statements should be in your PBO Module.
Regards,
Hema
Message was edited by:
Sorry, Declarations can be in the common include. Select statement and refresh statement should be in PBO.
        Hema Nagarajan

How to display value in memory

How to display value in memory, except call function 'LIST_FROM_MEMORY' .
Thanks.

Hi
See this
may be useful
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
SAP global memory retains field value through out session.
set parameter id 'MAT' field v_matnr.
get parameter id 'MAT' field v_matnr.
They are stored in table TPARA.
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
ABAP memory is temporary and values are retained in same LUW.
export itab to memory id 'TEST'.
import itab from memory Id 'TEST'.
Here itab should be declared of same type and length.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
ABAP Memmory & SAP Memmory
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Reward points for useful Answers
Regards
Anji

How to display more than 132 characters in a smartform

Hi Experts,
I am reading notes/text entries by calling read_text and then passing them in a variable. I want to display the notes. But even after declaring the variable as LINE2048, it is displaying only 255characters as output length in smartform.
My code:
TYPES: BEGIN OF TYP_FINAL,
         PARTNER_NO      TYPE BU_PARTNER,         "Partner No.
        OBJECT_ID       TYPE CRMT_OBJECT_ID_DB, "Object ID
        PROCESS_TYPE    TYPE CRMT_PROCESS_TYPE, "Activity Type
       ACTUAL_NOTE     TYPE LINE2048,           "Actual Notes
       END OF TYP_FINAL.
data : T_FINAL           TYPE STANDARD TABLE OF TYP_FINAL,
          WA_FINAL          TYPE TYP_FINAL.
data: v_actualnote     TYPE LINE2048.
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
             CLIENT                        = SY-MANDT
              ID                            = C_0002
              LANGUAGE                      = sy-langu
              NAME                          = l_name1
              OBJECT                        = C_BUT000
            TABLES
              LINES                         = t_line
           EXCEPTIONS
             ID                            = 1
             LANGUAGE                      = 2
          IF SY-SUBRC = 0.
           clear: v_accountnote.
           LOOP AT T_LINE INTO WA_LINE.
             CONCATENATE v_accountnote wa_line INTO v_accountnote SEPARATED BY space.
             clear: wa_line.
           ENDLOOP.
          wa_final-account_note = v_accountnote.
          clear: v_accountnote.
         ENDIF.
On the smartformm side, under main window->loop->text(to display the variables).
How to display more than 255 characters in a smartform.
Regards,
Sangeeta.

why the heck would you use read_text when you want to print a text/note on a form?
in SAP-Script we use the "INCLUDE"-Statement for this.
and in smartforms a Text-node of type 'I'.
you can not write all in one line and expect the system to handle this like a floating text.
one character takes a cretain amount of space (varying for different characters and font and font sizes).
you Page has a certain width, so where is the miracle in the thesis that on a sheet of paper with a certain width just a certain amount of characters will fit?

How to display field information dynamically in reports

How to display field information, depending on the description in DOMAINS..dynamically in reports...
give an example.
Thanks

Hi
the text u should take into the internal table for that and
it should send into the ALV_GRID_DISPLY
SLIS_FIELDCATALOG_T_ALV-SELECTION_TEXT = " DOMAIN".
other wise u should set in the write statement
write : / ' '.

How to display the eror message in the iView

Hi
I want to check the user input in the client side and display an error message in the iView instead of displaying the error message as an alert
it is ok when I tried to do it as an alert
alert('ERROR MESSAGE');
but the problem is how to display the error message as a text in the iView ...
I wrote the below code..
any one can see it and has any sugestion?
Thanks
=============
<%@ taglib uri="tagLib" prefix="hbj" %>
<%
String compid = "";
String message = "";
%>
<hbj:content id="MyContent">
<hbj:page title = "Selection Screen">
<hbj:form id = "myForm">
<br>
<br>
<br>
<center>
<H3>Benefits Statement </H3>
<H4>Selection Screen</H4>
<hbj:gridLayout
id="FSSLayout"
debugMode="False"
width="40%"
cellSpacing="5"
>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="1"
width="10%"
horizontalAlignment="LEFT"
style="WildStyle"
>
<hbj:label
id="label_inputPernr"
required="TRUE"
text="Personal Number:"
design="LABEL"
labelFor="inputPernr"
/>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="2"
width="40%"
horizontalAlignment="LEFT"
>
<hbj:inputField id = "inputPernr"
>
<%
compid=MyContent.getParamIdForComponent(inputPernr);
%>
</hbj:inputField>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="10"
columnIndex="1"
width="40%"
horizontalAlignment="CENTER"
colSpan="2"
>
<hbj:button id = "myButton" text="Submit.." design="EMPHASIZED"
tooltip="Click me to submit this form" onClick="ClickEvent" onClientClick="validRequired()">
</hbj:button>
</hbj:gridLayoutCell>
</hbj:gridLayout>
</center>
<p font="Arial" size=20><%= message%></p>
</hbj:form>
<SCRIPT LANGUAGE="Javascript">
function validRequired()
var myvar = document.getElementById('<%=compid%>').value;
var ivID='<%=componentRequest.getComponentContext().getContextName()%>';
if (myvar = " ")
message = "Enter Employee Number";
ivuRefresh(ivID);
htmlbevent.cancelSubmit=true;
</SCRIPT>
</hbj:page>
</hbj:content>

No problem, here is an example of some html code and javascript that you can adapt to your needs. You can display this standalone to see how it works.
I hope this helps
<html>
     <head>
          <script language="JavaScript">
               function validateForm(){
                    if(document.getElementById("nameField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Name";
                    else if(document.getElementById("ageField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Age";
                    else if(document.getElementById("idField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the id";
                    else
                         document.getElementById("errormessage").innerHTML = "";
          </script>
     </head>
     <body>
          <table border="0" cellpadding="0" cellspacing="0">
               <tr>
                 <td>Name</td>
                 <td><input type="input" id="nameField" name="nameField"></td>
               </tr>
               <tr>
                 <td>Age</td>
                 <td><input type="input" id="ageField" name="ageField"></td>
               </tr>
               <tr>
                 <td>Id</td>
                 <td><input type="input" id="idField" name="idField"></td>
               </tr>
               <tr><td><font color="red"><span id="errormessage"></span></font></td></tr>
               <tr><td><input type="button" name="validate" onClick="validateForm()" value="Click to validate"/></td></tr>
          </table>
     </body>
</html>

CSM : How to display state transitions ?

Similar Messages

Maybe you are looking for