CSM issue while adding IPS

Dear friends,
While adding an IPS to CSM (through Add from Network option), i don't see the OS Type listing IPS as an option? I only see ASA, IOS and other options.
If i go to Tools-->IPS Manager, i still dont see an option to add IPS but only re-import and reboot.
The version of CSM that i am running is 3.01.
I also installed the CSM IPS patch.
I hope that i am adding the IPS the right way.
Is there any workaround for this
Thanks a lot
Gautam

A shared member is a virtual copy of the "real" member and cannot have a different alias than the "real" member. Once you have an alias on the "real" member the shared member will automatically have the alias as well.

Similar Messages

Issue while adding DB resources to the fail safe group

Hi,
we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
During the step, Adding the oracle Database Resource to the fail safe
group , I am getting the error.
28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
I am having one local disk C: one shared disk Z: and quorum disk Q:
Shared disk Z: is already used for SAP<sid> group.
Regards
Joel

No crossposting please!
Error while adding oracle database resource to the fail safe group

Issue while adding Help Link using personalization

Hi... i am adding a help links on all the iRec pages using personalization.
Requirment:-
Need to have a help link on all the pages of iRec at the left corner of the page
So i made the following changes to do this...
1. Created a new Region(This regios is shared by all the pages of iRec)
StackLayout (AM set to deflaut value)
|_
RowLayout (Horz Align set to end)
2. Now i go to the page, click on personalize link at top, and create a new Stack Layout Region below the PageLayoutRN for the Page
and set the extend property of this StackLayout to my above create region.
3. Create a new item under RowLayout, Item Type "Link" and set the destination URI for this link to say "http://google.com"
I do the same steps above on all the pages of iRec and point the destination URI for the link to the one i want to set and all this is done at Site level.
But the issue i am getting is that i am not able to see these personalizations for all the users and at some places the links i created are not clickable. They simply display on the page but cannot be clicked.
Is there something i am doing wrong? so is there any step i did wrongly? Please let me know the solution.
Thanks
Sandeep

It should not be show this behavior. one test you can do in this reference create Two more item at site level say MessageStyleText and one more link and check this behavior to all the user.

Issue while adding WCF Web Service reference using Oracle APEX

Hi,
We have an issue with creating the Web Service Reference for the WCF web service:
http://dev.virtualearth.net/webservices/v1/metadata/geocodeservice/GeocodeService1.wsdl
The APEX gives the following error
“The WSDL document could not be understood by the rendering engine. Click Create Web Service Reference Manually to continue creating a reference for this service.”
Can you please tell me if creating the Web Service Reference for WCF is supported on the “out of the box“ APEX?
Environment information:
APEX 4.0.2.00.07
Database 11.2.0.3
Please note that we have tried it in APEX 4.1.1 from apex.oracle.com and the error there is different, it can connect even to ASMX wsdl.
Thank you.

I don't think that is it specific to just .NET web services. I have tried with a web service created with TIBCO BusinessWorks (Middleware product) that did not work either. The wsdl validated correctly in soapUI, so I think it just must be the implementation of the parser which is looking for some specific format.
When in doubt, go with either the manual reference or with pl/sql using one of the api's.

SQL Server Transacational Replication Issue while adding a new article

I have a "PULL" transaction replication toplogy (SQL server 2008 R2 - publisher,subscriber & distributor) in place and is working fie. I added a new article (table) using sp_addarticle and it works fine. Then I tried to add subscription
to the new article using sp_adddsubscrition SPROC from the publisher (details below)
EXEC sp_addsubscription @publication = @pub_name, @article = @article_name, @subscriber = @sub_server, @destination_db
= @sub_dbname, @subscription_type = N'pull',@update_mode = N'read only', @sync_type = 'sutomatic', @status = 'active',
@reserved ='Internal'
I tried with all combination of values in the @sync_type parametr,
The above command fails with the following message:
Msg 14100, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 533;
Specify all articles when subscribing to a publication using concurrent snapshot processing.
The sync_type value parameter is "replication support type" when the subscrition was added orginally to the publication. This trsnslates into a value of 3 (CONCURRENT) in sync_method
column on the outpout of sp_helppublication SP execution.
What am I doing wrong? Please advise. Your help is much appreciated.
Thanks in advance
Kirti

Thanks for your reposne, Mr. Cottr.
It was a type-oin the value for @sync_type parameter in the sp_addsubscription call when I posted this article originally. It was actually set to "automatic". I have posted the scripts per your request. These scripts are executed in SQLCMD mode in
SSMS query qindow. Since this is a PULL subscription, thre is another script for pP-addpullsubscription that is not incldued in this post. If you need that also, I will be glald to post that also. Thanks again for your help.
-->>>>>sp_addpublication:
USE [master]
GO
 SQL Server Transactional Replication Related Scripts
Function: Configuring publication on the database at the publisher
-- TO DO: Parameters to set before executing this TSQL batch script
:SETVAR pub_dbname TestDB
:SETvar pub_name TestDB-TranPub01
:SETVAR distributor DISTRIBSVR
:SETVAR repl_admin_account <domain>\<account_name>
 --replication admin account for non-prod environment
:SETVAR repl_admin_password <pwd>
 --password for replication admin account
USE [$(pub_dbname)]
SET NOCOUNT ON
IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
BEGIN
 RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
 RETURN
END
DECLARE @dynsql sysname
 ,@repl_ddl int
 ,@allow_initialize_from_backup varchar(5)
SET @repl_ddl = 1 -- preferred value is 0 (replication of DDL statements prohibited; manually enabled
when needed only)
SET @allow_initialize_from_backup = 'true' -- preferred /do not change this value
-- Adding the transactional publication
DECLARE @desc varchar(255)
SET @desc = 'Transactional replication of database ' + QUOTENAME('$(pub_dbname)') +
 ' from publisher ' + QUOTENAME(@@servername) + '; Publication: ' + QUOTENAME('$(pub_name)')
PRINT '1. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
EXEC sp_addpublication
 @publication = '$(pub_name)',
 @description = @desc,
 @retention = 0,
 @add_to_active_directory = N'false',
 @allow_push = N'false', -- push subscription disabled
 @allow_pull = N'true', -- pull subscription enabled
 @allow_anonymous = N'false',
 @allow_sync_tran = N'false',
 @allow_queued_tran = N'false',
 @allow_dts = N'false',
 @allow_initialize_from_backup = @allow_initialize_from_backup,
 @allow_subscription_copy = N'false',
 @compress_snapshot = N'false',
 @enabled_for_internet = N'false',
 @enabled_for_p2p = N'false',
 @independent_agent = N'true',
 @immediate_sync = N'false',
 @repl_freq = N'continuous',
 @replicate_ddl = @repl_ddl,
 @snapshot_in_defaultfolder = N'true',
 @status = N'inactive', -- initialy publication is inactive / activated later after articles
are added to the pblication
 @sync_method = N'concurrent' -- preferred
IF @@ERROR <> 0 RETURN
PRINT '2. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
EXEC sp_addpublication_snapshot
 @publication = '$(pub_name)',
 @frequency_type = 1,
 @frequency_interval = 1,
 @frequency_relative_interval = 1,
 @frequency_recurrence_factor = 0,
 @frequency_subday = 8,
 @frequency_subday_interval = 1,
 @active_start_time_of_day = 0,
 @active_end_time_of_day = 235959,
 @active_start_date = 0,
 @active_end_date = 0,
 @job_login = '$(repl_admin_account)',
 @job_password = '$(repl_admin_password)',
 @publisher_security_mode = 1, --Windows authentiction
 @publisher_login = '$(repl_admin_account)',
 @publisher_password = '$(repl_admin_password)'
IF @@ERROR <> 0 RETURN
PRINT 'Executing sp_helppublication for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
EXEC sp_helppublication @publication = '$(pub_name)'
PRINT 'Executing sp_helppublication_snapshot for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
EXEC sp_helppublication_snapshot @publication = '$(pub_name)'
--->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-->>>>sp_addsubscription
USE [master]
GO
 SQL Server Transactional Replication Related Scripts
Function: Register the (pull) subscription at the subscriber
-- TO DO: Parameters to set before executing this TSQL batch script
:SETVAR publisher_dbname TestDB
:SETvar publication_name TestDB-TranPub01
:SETVAR subs_server SUBSVR
:SETVAR subs_dbname TestDB
:SETVAR distributor DISTRIBSVR
:SETVAR repl_admin_account <domain>\<account_name
 --replication admin account for non-prod environment
:SETVAR repl_admin_password <pwd>
 --password for replication admin account
USE [$(publisher_dbname)]
SET NOCOUNT ON
IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
BEGIN
 RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
 RETURN
END
DECLARE @dynsql sysname
 ,@distibutor sysname
 ,@subscriber sysname
 ,@pub_dbname sysname
 ,@pub_name sysname
 ,@pub_login sysname
 ,@pub_password sysname
 ,@dest_dbname sysname
 ,@job_login sysname
 ,@job_password sysname
 ,@repl_ddl int
 ,@allow_initialize_from_backup varchar(5)
SET @pub_dbname = '$(publisher_dbname)'
SET @pub_name = '$(publication_name)'
SET @subscriber = '$(subs_server)'
SET @dest_dbname = '$(subs_dbname)'
SET @distibutor = '$(distributor)'
SET @job_login = '$(repl_admin_account)'
 -- used by replication agents to connect
to publisher for queued updating subscriptions
 -- make sure account has DBO access on subscriber
db
SET @job_password = '$(repl_admin_password)'
PRINT '1. Adding subscriber for pull subsctiption of publication ' + QUOTENAME(@pub_name) + ' on database ' + QUOTENAME(@pub_dbname) + ' ...'
EXEC sp_addsubscription
 @publication = @pub_name,
 @article = 'all',
 @subscriber = @subscriber,
 @destination_db = @dest_dbname,
 @subscription_type = N'pull',
 @update_mode = N'read only',
 @sync_type = 'replication support only',
 @status = 'active'
IF @@ERROR <> 0 RETURN
Execute sp_helpsubscription @publication = 'FTBTrade_TEST-TranPub01'
--@pub_name

HT1473 i am not able to add mp4 file to itune.What may be the issue.While adding mp4 file i am not getting any error message from itune.Please help.

I am not able to add mp4 or mov files to my itune.itune is also not throwing any error message,I am bit confused.Which formats of video file can be added to itunes??I have itunes of 11.0.2.26 version and iphone 4s-6.1.3 version.

I am not able to add mp4 or mov files to my itune.itune is also not throwing any error message,I am bit confused.Which formats of video file can be added to itunes??I have itunes of 11.0.2.26 version and iphone 4s-6.1.3 version.

Issues while adding job title of a Business Partner through rel ship cate

Hi friends
we are getting employees data from R/3 HR . i am trying to assign the job titles to employees in CRM systems through relationship category but here i am getting error "Maintenance is only possible via an external HR system" .here if choose continues i am getting job title in change mode . i can give input for job title but it is not saving. Could any one please suggest me how to do add the job title.
whether it can be possible to change job title in CRM or not.
If it is HR how could i add it.
Earlier reply would be appreciated
Thanks in advance
Rao

Hi friends
we are getting employees data from R/3 HR . i am trying to assign the job titles to employees in CRM systems through relationship category but here i am getting error "Maintenance is only possible via an external HR system" .here if choose continues i am getting job title in change mode . i can give input for job title but it is not saving. Could any one please suggest me how to do add the job title.
whether it can be possible to change job title in CRM or not.
If it is HR how could i add it.
Earlier reply would be appreciated
Thanks in advance
Rao

Issue while adding BW reports to role menu

Hi All,
Today, I was trying to assign a list of BW reports to a partcular role in our project. As i started assigning the reports from menu
tab in PFCG, I observed that all the reports are getting stored with same name "RRMX - Business Warehouse report "
I also observed that all the reports have only one auth obj S_TCODE, when I checked in auth tab.
As, Iam new to BW security, I need guidance here.
->Is it normal for all the reports to get saved with same name in role menu?
->Also, I need to confirm if the reports given to me are already created and active reports, How can i check it?
->Also suggest me the proper way to assign reports to the role.
Regards,
Brahmeshwar.

> ->Is it normal for all the reports to get saved with same name in role menu?
Unfortunately these BW-reports are all started by t-code RRMX. PFCG does not know what is behind RRMX. The t-code in PFCG is always 'RRMX'
> ->Also, I need to confirm if the reports given to me are already created and active reports, How can i check it?
hmmm,.... maybe execute them?
> ->Also suggest me the proper way to assign reports to the role.
well normally simply press the 'add report' button on the menu tab of pfcg, then select as per your choice.
BW-REports (RRMX) are a bit different....
There is a note from BW giving some information for BW-admins who have to work on backend and maintain roles....
note # 316470
b.rgds,
Bernhard

Error Code "-5002" While adding a Goods Issue Document

Hi,
While adding a goods issue document for only a specific combination of items I get "Internal Error (-5002) occured" message.
The scenario is i am adding 5 rows with following specification
Row1- Serial Managed Item
Row2- Batch Managed Item
Row3- Managed by none
Row4- Batch Managed Item
Row5- Serial Managed Item

Hi I had the same Issue,
What my problem solved was setting the baseline number for each serial and batch number on each specific line to the line number of that specific line.
like this:
doc.Lines.SerialNumbers.SetCurrentLine(doc.Lines.SerialNumbers.Count - 1);
doc.Lines.SerialNumbers.InternalSerialNumber = 2;
doc.Lines.SerialNumbers.BaseLineNumber = doc.Lines.SerialNumbers.Count - 1;
Regards

Issue with Webparts while adding in Project Site

Hi
I am getting an error while adding web parts in project site page 2010. Below the steps
Open project site --> site actions --> edit page --> click on Add webpart --> ProjectWebApp --> Project fields --> Add
Please try and let me know is this possible or not
Regards
Santosh

Santosh,
The Project Fields webpart is ties to the PWA context, and cannot be added to Project Site.
There used to be a solution starter called Project Workspace Custom Fields webpart. You might want find and use that
An alternative is to develop your own SSRS report and display it in webpart..
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Error while adding a webpart to a sharepoint

I need some help with adding a custom web part to the landing page. I created a new wsp file for the web part and tried to add it as a solution into the web galleries of the site settings. But I am unable to invoke this web part and it throws an error, “The
site collection containing this sandboxed solution has exceeded its daily resource usage quota”
The web part appears within the custom web part section when I try to add it into the page. As an FYI, I tries to modify the quotas and locks of the template being used within the site collection-> modify quotas and lock of the central administration
and have increased Sandboxed resource solution quota to 300 points but still it somehow doesn’t appear to change while adding the web part.
What am I doing wrong here?

Well, the issue was that while updating the quotas and locks for the sharepoint site I needed to select the web application and not the web farm. The resource did get increased to 300 points at the farm level but as I was using a sandboxed application
to be added as a web part, the target should have been the web application. I corrected this and then added the solution to the sharepoint and activated the solution. After which I was able to include the web part into the site. Hope this helped, do let me
know if anyone needs any further explanation.

Error while adding Image: ORA-00001: unique constraint

Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AM

Hi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators.

'No detailed information exists for this person' while adding new reviewer

Hi All,
This is an extremely urgent issue.
We are getting the following message in SRM while adding a new approver to the Shopping cart once the - 'No detailed information exists for this person'
We have implemented the following OSS Notes in the SRM 5.5 system, Release 700 after rasing a call with SAP.
SAP Pilot OSS note - 1002957
Other OSS Notes -
999528 Adding Ad Hoc Approver fails due to comit erro...
722357 Ad hoc: Commit control with ad hoc enhancement...
990467 Commit Problem with AdHoc Agents...
984582 Problems with Posting Container Data (ad Hoc
 agent...
947296 Inserted/changed approver is not transferred...
910925 SRM Workflow: Ad-hoc agent not found...
803628 BADI workflow: You cannot add an approver
Here are the details
 Cannot add additional approver
 We are now on SRM 5.5 and a document attached shows the
 patch levels
 from SPAM.
 In shop transaction, it is possible to change the
 default approvers,
 but not possible to Add.
 When we add, the system shows the list of available
 approvers, allows
 selection, but "transfer" button does not actually
 transfer.
 When the cart is saved, the added approval shows as "no
 approval
 available".
 We are using the standard workflows for 2 step approval.
 A document is attached to show what happens and the
 results of checks
 we have performed.
 BUS2121 also shows as ok when checked.
Any pointers what could be possible reasons.
Points for sure. !!
Regards
- Atul

Hi Atul,
Here is the list.
 |----- 0000702787 EBP 4.0: Message "Enter a country"
 |----- 0000732828 E-mail messages for work items with incorrect line break
 |----- 0000735026 Memory problems at BBP_GETLIST_INDEX_FILL
 |----- 0000804317 SRM40/SUS/PO: PO inbound with error BBP_PD 147
 |----- 0000862851 PO not ordered due to different locations error
 |----- 0000902956 Changing Account assignment category BE Limit service PO
 |----- 0000911446 No reservation is created
 |----- 0000917869 SRM 5.0: PPOMV_BBP - Vendor address tab page
 |----- 0000919553 SRM 5.0: Termination of output preview for invalid partner
 |----- 0000920363 Shopping cart transfer: Sourcing indicator is not set
 |----- 0000924218 SRM 5.0: wrong error message for non existant auth. PurchOrg
 |----- 0000924811 SRM5.0: Javascript error on document screen
 |----- 0000926750 Shopping cart: Unit of measure is not restored
 |----- 0000926878 Link for expanding details in the shopping cart too small
 |----- 0000927142 SRM5.0: Browser hangs up during attachment upload
 |----- 0000938168 SRM50: Message "No default value from vendor master"
 |----- 0000938296 JavaScript runtime error in the bid invitation
 |----- 0000940805 BBPS_SC_APP_SOS cannot be enhanced
 |----- 0000941935 External requirements displayed as a reference
 |----- 0000942742 Update is cancelled if new source of supply is found
 |----- 0000944592 No location when vendor has changed
 |----- 0000944918 ECS: Find back end purchasing group as a responsible group
 |----- 0000945601 Termination when you display purchase order item detail
 |----- 0000948425 Shopping basket changeable although already approved
 |----- 0000953238 Shopping cart history in the sourcing cockpit
 |----- 0000954066 Follow-On Documents Tab does not get Highlighted
 |----- 0000954409 Error message during approval of a confirmation
 |----- 0000955377 Long runtimes for workflows with blocks
 |----- 0000956108 Empty worklist after clicking button 'Find'
 |----- 0000956723 BBPMAININT:Bus. partner display switches to maintenance mode
 |----- 0000956797 RUSRM50: Limit Purchase Order Functional Area Error Message
 |----- 0000957884 Category Management: Data disappears after program SAVE
 |----- 0000958045 BBPSC04: Delete icon not hidden despite screen variant
 |----- 0000958349 Final delivery with quantity 0
 |----- 0000959528 During PO creation wrong error message BBP_PD 428
 |----- 0000960169 Favorites not saved for 'Purchase for'
 |----- 0000961422 BBP_MON_SC: No search help for 'Created By'
 |----- 0000962093 BBP_VENDOR_CREATE: Refresh BP data
 |----- 0000962252 BBP_GETLIST_INDEX_FILL: Incorrect processing statistics
 |----- 0000962474 Error after changing partner data
 |----- 0000964132 Approval Preview for Rejected Items: Wrong User's Inbox
 |----- 0000964361 Cannot find employee of vendor
 |----- 0000964455 Country for the PO box is initial
 |----- 0000964911 Kopieren von Alertkategorien: Containerelemente verschwinden
 |----- 0000966072 Download of material fails - set type COMM_PR_UNIT
 |----- 0000966323 Service Item: Not able to create PO in ERP backend
 |----- 0000967429 Approval buttons not updated after release
 |----- 0000967615 Performance of BBP_PD_PO_GETDETAIL may be poor
 |----- 0000968110 Transfer canceled, account assignment acc. to value/quantity
 |----- 0000968251 BBPSC02:In source of supply preferred vendor not validated
 |----- 0000969091 SRM does not support passwords longer than 8 characters
 |----- 0000982293 Ext requirements: Purchasing group data not transferred
 |----- 0000982448 Impossibility to delete an item in PO
 |----- 0000982674 Change PO quantity does not update account assign quantity
 |----- 0000983130 Search for back-end purchase orders using the requester name
 |----- 0000984184 BADI BBP_ALERTING active but its implementation isn't called
 |----- 0000985179 Delete button active for backend service entry sheets
 |----- 0000990264 Multiple confirmations cannot be posted for service & limit
 |----- 0000996104 No catalog when confirming back-end blanket purchase orders
 |----- 0001003408 BBPCF: Cannot Add Catalog Item to Confirmation for Limit PO
 0001010791 Flag Confirmation based Invoice Verification set erroneous
Kind regards,
Yann

Getting an error while adding the user in Sharepoint foundation 2010 environment.

Hi,
I am having full control access to SharePoint site. Then i tried add user for that site.
But i am getting following error while adding the user to the site.
An unexpected error has occurred.
Troubleshoot issues with microsoft SharePoint Foundation.
Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
Can you please help me anyone on this.
Thanks,
Ashok

This could be any one of a number of things. You need to lookup the Correlation ID in the ULS logs on the SharePoint server. That should provide the additional information necessary to diagnose and solve the problem. Here's a blog post
on how to find the error.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Not able to set Weblogic Runtime on eclipse while adding new weblogic srvr

Hi Everyone,
I downloaded Oracle Integration pack for eclipse by clicking at "Download additional server adapters". I am not able to set Weblogic Runtime on eclipse while adding new weblogic server.
I am trying to give following values:
Name :Oracle WebLogic Server 10gR3 (2)
Weblogic home :C:\bea\wlserver_10.3
Java home: C:\bea\jrockit_160_05
Below it I am getting "No applicable extension found" and finish button is greyed out.
Please help in telling what is wrong. Never faced such an issue.
Thanks
SM

I found this problem too.
OS:windows7、eclipse:helios、oepe:Part of Oracle Enterprise Pack for Eclipse 11.1.1.7.3
<workspace>\.metadata\.log:
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: enter_new_hit_count in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: exception_occurred_setting_bp_properties in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: hit_count_must_be_positive in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: no_description_provided in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: scripts in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: select_javascript_file in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: set_bp_hit_count in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: suspend_target in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: suspend_thread in: org.eclipse.wst.jsdt.debug.internal.ui.messages
!ENTRY org.eclipse.osgi 2 1 2012-06-05 00:16:06.357
!MESSAGE NLS unused message: the_argument_0_is_not_valid in: org.eclipse.wst.jsdt.debug.internal.ui.messages
I tried the weblogic 10.3.1、10.3.3、10.3.4、10.3.5 still show the info that "No applicable extension found" and finish button is greyed out.
What is the reason?
thanks!

CSM issue while adding IPS

Similar Messages

Maybe you are looking for