Css content weight?
Hi,
I have the following scenario, I have site A and site B, both are currently working using one vip each, with 2 services under each.. and we are using GSLB under the contents i.e. add dns www.domain.com..
All is working fine and we are using the app session and "dns both" to dynamically pass the content from switch A to switch B and vice versa..
However when I make the dns query for "www.domain.com" to each switch indepentantly they each give back their local content VIP (unless I manually fail one of the sites).. I would like switch B to always pass back the VIP for switch A in its dns response (unless site A is down).
I have tried looking at weight but this seems only to apply to services... does anyone have any ideas on how to achieve this?
Many thanks
Matt
Matt,
you have to first convert from content-based GSLB to zone-based.
With zone-based GSLB you can use weight.
ie:
CSS11503-2(config)# dns-server zone 1 tier1 "css1503-2" ?
Execute command
weightedrr Return records using a weighted round robin algorithm
Look at the following link to convert from content-based to zone-based GSLB
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a00801577fc.html#998504
Gilles.
Similar Messages
-
Is there a way to extract CSS font weight info in illustrator cc
Hi there,
i am trying to extract CSS font weight infos from Typekit Fonts from the Illustrator CSS export function. No Luck – Is there even a way to do it?
Illustrator is not able to separate between Bernina Sans Semibold or Extrabold oder even condensed vs non condensed…
Help is very much appreciated! :-)Sudeshna,
Thank you for your response. Unfortunately I do not know programing so am unable to do anything with the code in the link provided. This process has caused quite allot of stress as I was able to make something work with one of my clients Flash files into Illustrator but not the other. I have CC and previous versions of Flash but none of them work for what I need. Even when I am able to get an FXG file saved it will not open in Illustrator and I keep getting the same message that the "file needs to be validated". I have no clue what that means or how to validate it. There is nothing online to help.
Is this a problem that Adobe has recognized and that is why it has been removed… for a rebuild? If so, I certainly hope they come up with a better solution than previous solutions. I am surprised there are no posts about this online as I would think it is a headache for others as well.
I am sorry for all of my frustrations and I am certainly not trying to take them out on you. I am just trying to remove vector art from Flash to work with in Illustrator. Easy enough from Illustrator to Flash.
Please let me know of any other solutions you might have and thank you again for your response.
Jim -
Exam Content & Weighting Information
Dear Gurus
while taking the SD certification exams , we had a section called
"Exam Content & Weighting Information", which gives in terms of "++" the weightage of a category. where :-
Weighting Key in the Test:
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
Can anyone post the same for a MM certification please.
Regards
Manoji got it from this link H:my documentspersonalCertification Requirements Documentation.htm
reward if helpful
SAP Consultant Certification
Solution Consultant SCM - Procurement with mySAP ERP 2005
Software components: SAP Enterprise Central Component (ECC) 6.0
Certification exam is included in course TSCM52 and is also offered in separate certification events at many SAP locations.
Certification ID (Booking code): C_TSCM52_05
Certification duration: 3 hours
Number of certification questions: 80
Required certificates for participation in this certification test: None
Consultant Academy courses for certification preparation: TSCM50 (Procurement I), TSCM52 (Procurement II (incl. Case Study)) and the e-learning courses SAP125 (Navigation), ERP001 (Management empowered by mySAP ERP), SAP210 (Procure to Pay), SM001 (Solution Manager Overwiew)
Alternative Project Team Training courses for certification preparation: SCM500 (External Procurement Processes), SCM525 (Consumption-Based Planning), SCM520 (Purchasing), SCM515 (Invoice Verification), SCM510 (Inventory Management and Physical Inventory),SCM550 (Customizing in Materials Management) and case studies from TSCM52 (Procurement II (incl. Case Study)) and the e-learning courses SAP125 (Navigation), ERP001 (Management empowered by mySAP ERP), SAP210 (Procure to Pay), SM001 (Solution Manager Overwiew)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant SCM - Procurement with mySAP ERP 2005 verifies the knowledge in the area of the Procurement] for the consultant profile. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. SAP Overview
SAP navigation
Management Empowered by mySAP ERP
Procure-to-pay
2. Procurement Process (++)
Purchase requisitions
Purchase orders
Requests for quotations
Procurement for stock
Procurement for direct consumption
Subcontracting
External services
Reporting
3. Master Data
Material master
Vendor master
Purchasing info records
Source list
Quota arrangement
Messages
4. Purchasing Optimization (++)
Contracts
Scheduling agreements
Invoicing plans
Document release procedure
Purchasing document configuration
5. Inventory Management (+++)
Goods receipts
Goods issues
Stock transfers
Reservations
Consignments
Physical inventory
Availability check
Transaction types
Messages
6. Valuation and Account Determination
Material valuation
Price control
Account determination
Split valuation
7. Material Requirements Planning
Reorder point planning
Lot-size calculation
Planning run
Planning result
8. Logistics Invoice Verification (++)
Invoices
Credit memos
Automatic settlement
Invoice verification in the background
Adjustments
Freight invoices
Blocked invoices
GR/IR clearing account maintenance
9. Configuration of the Enterprise Structure and the Material Master
MM organizational levels
Material type
Field selection
10. Solution Manager
Overview of the Solution Manager
11. Experience from Implementation (Case Study or Project)*
Design of enterprise structures (organizational levels in mySAP Business Suite)
Integration and dependencies
= Cross-subject implementation and integration knowledge is tested in subject area 11. Implementation and integration knowledge referring to a special subject (such as goods receipt) is tested in the relevant subject (such as inventory management).
Amount of questions by topic (as a percentage of the test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
No responsibility is taken for the correctness of this information. Copyright © SAP AG 2006. -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/780590]''
I want move Firefox tabs to the bottom like opera
but the code of userChome.css
#content > tabbox { -moz-box-direction: reverse; }
does'nt work,
and tabmix can do this,but current version of tabmix is incompatible with Firefox 4.You can get the development version of Tab Mix Plus which works with Firefox 4 from http://tmp.garyr.net/forum/viewtopic.php?t=10888
The author of Tab Mix Plus has stated that he is almost ready to release a new version of Tab Mix Plus. -
CSS content configuration problem
Hello,
I've a strange problem with CSS configuration (written below). In 10% of times, content "ABCD80old2" doesn't work - clients trying to access "/AB*" resources, receive answers from Serv3 and Serv4 (not from Serv1 or Serv2, as they should). Upgrade to the version 8.2.01 didn't resolve the problem.
Here's the configuration from CSS 11506:
content ABCD80old2
vip address 10.30.4.254
advanced-balance sticky-srcip
sticky-inact-timeout 120
add service Serv1
add service Serv2
port 80
protocol tcp
url "/AB*"
active
content ABCD80
vip address 10.30.4.254
protocol tcp
port 80
advanced-balance sticky-srcip
sticky-inact-timeout 120
add service Serv3
add service Serv4
active
Thank you in advance for any ideas.I have to configure different content for URL /AB*, because such resources reside on different servers. So, if clients are incorrectly redirected to Serv3 or Serv4, they get "Page not found".
Configuration for services:
service Serv1
ip address 10.30.2.22
protocol tcp
port 80
keepalive type tcp
keepalive tcp-close fin
keepalive frequency 20
active
service Serv2
ip address 10.30.2.23
protocol tcp
port 80
keepalive type tcp
keepalive tcp-close fin
keepalive frequency 20
active
service Serv3
ip address 10.30.2.24
port 80
keepalive type tcp
protocol tcp
active
service Serv4
ip address 10.30.2.25
port 80
keepalive type tcp
protocol tcp
active
Correct me, if I'm wrong, but I read, that CSS looks for the most _exact_ content first - so URL with /AB* should be processed with content ABCD80old2, which is more precise than content ABCD80. -
CSS - add service x.x.x.x weight command
Hi, From the Cisco pages I read the following
"The CSS uses the weight for a service when you configure weighted roundrobin load balancing on the content rule. When you assign a higher weight to the service, the CSS redirects more requests to the service."
This suggests to me a server with a weight of 2 will receive twice as much hits as one with a weight of 1.
We have this configuration but the customer sees the server with a weight of 1 getting more hits, this is backed up by the show summary stats on the CSS.
content www.abc.com
vip address 145.26.114.42
port 443
protocol tcp
advanced-balance sticky-srcip
sticky-inact-timeout 31
add service 1.1.1.1-443
add service 2.2.2.2-443 weight 2
add service 3.3.3.3-443 weight 2
add service 4.4.4.4-443 weight 2
add service 5.5.5.5-443 weight 2
add service 6.6.6.6-443 weight 2
add service 7.7.7.7-443 weight 2
balance weightedrr
active
=======================================
www.abc.com
Service Hits
2.2.2.2-443 2784623
3.3.3.3-443 2868285
4.4.4.4-443 2688701
5.5.5.5-443 2763660
1.1.1.1-443 5105735
6.6.6.6-44 2634987
7.7.7.7-44 2733737
cheers,
MikeGilles,
I can't really believe this is the cause, prior to configuring the weights the hits on the box were almost identical (+/- 5%).
Now the server with weight of 1, is almost 50% more than all the other 6 servers, if stickyness was the cause then each of the 7 servers would have differing hits, 6 of the servers are extremely close in hits.
The nature of this application would not cause the a user to open one connection, and another to open 10.
cheers,
Mike -
Characters inside content="" code disappears on saving .css
If I open an existing css file with the code content=""; make some other changes and save the content it disappears.
My guess is that this is some kind of language/character/utf related setting?
I only have this problem in Dreamweaver CC, not in old versions of Dreamweaver.
Before:
.test {
content:="";
After save and reopen the file the line looks like:
.test {
content:="";This link describes the proper use of the 'content' style -
CSS Content Property -
I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
Does anyone have any suggestions on how to solve this probelm?
Here is the error:
The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>500 - Internal server error.</title>
<style type="text/css">I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
Hi,
I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
{"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
I do have windows Activation Features installed and I am using .Net Framework 4.
Thanks
Sofia Khatoon -
Hello:
I have a CSS 11501 where I need to balance Telnet,I can´t get service up and running.
My client need telnet to server connected to a server farm. I adjunt config and Troubleshooting.
!*************************** GLOBAL ***************************
ip route 0.0.0.0 0.0.0.0 192.168.198.1 1
!************************* INTERFACE *************************
interface e7
bridge vlan 16
interface e8
bridge vlan 16
!************************** CIRCUIT **************************
circuit VLAN1
ip address 192.168.198.200 255.255.255.0
circuit VLAN16
ip address 10.10.10.1 255.255.255.0
!************************** SERVICE **************************
service serv1
description "Server for Telnet"
ip address 10.10.10.2
active
!*************************** OWNER ***************************
owner CSS
content Telnet
vip address 192.168.198.100
add service serv1
protocol tcp
port 23
active
CSS11050# sh ser
Services (2 entries):
Name: serv1 Index: 2
Type: Local State: Alive
Rule ( 10.10.10.2 ANY ANY )
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 11/09/2004 05:20:12
Mtu: 1500 State Transitions: 6
Mtu: 1500 State Transitions: 6
Total Connections: 12 Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
CSS11050# sh summary
Global Bypass Counters:
No Rule Bypass Count: 0
Acl Bypass Count: 0
Owner Content Rules State Services Service Hits
CSS Telnet Active serv1 1
CSS11050# sh service summary
Service Name State Conn Weight Avg State Idx
Load Transitions
serv1 Alive 0 1 2 6 2Hi,
What's the server's default gateway? It should be the CSS vips of the back-end. -
Not able to access the floating content from UCM into WLP using VCR
Hi,
I am facing an issue while accessing the content ( floating content i.e CSS,content,javascript) from UCM 11g into WLP 10.3.2 using VCR. But at the sametime, i am able to access the content once its moved to contribution folder.
Please let me know is there any limitation in VCR i.e VCR can read the content from UCM once its moved to Contribution folder.
Thanks a lot,
SureshHi
Do you have sample code , how to refer css stored in UCM. If you have please share it -
Converting Smartforms output content into HTML File
Hi,
I have a requirement, Smartforms output contents needs be converted as HTML File and it should be sent as email.
I am able to get the Smartforms output in html format but the output is shown as binary format.
After the fm call the job_output_info parameter is holding the smartforms output content in
job_output_info-XMLOUTPUT[] (xsf content)
job_output_info-XMLOUTPUT-STSHEET[] (css content)
job_output_info-XMLOUTPUT-TRFRESULT[] (html content)
Help me out how to handle the job_output_info details to html format.
Code
DATA v_fm_name TYPE rs38l_fnam.
DATA v_tdsfname TYPE tdsfname VALUE 'ZVR39_SF'.
DATA output_options TYPE ssfcompop.
DATA job_output_info TYPE ssfcrescl.
DATA document_output_info TYPE ssfcrespd.
DATA job_output_options TYPE ssfcresop.
DATA w_control TYPE ssfctrlop.
*-Finding the Smartform Layout Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = v_tdsfname
IMPORTING
fm_name = v_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
*-Defining the output to HTML Format
*-Activating XSF Output
output_options-xdfcmode = 'X'.
output_options-xdf = space.
output_options-xsfcmode = 'X'.
output_options-xsf = 'X'.
output_options-xsfoutmode = 'A'. "
output_options-xsfoutdev = 'P863'.
output_options-xsfformat = 'X'.
*-Calling the Smartform Layout
CALL FUNCTION v_fm_name
EXPORTING
output_options = output_options
user_settings = 'X'
IMPORTING
document_output_info = document_output_info
job_output_info = job_output_info
job_output_options = job_output_options
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
GiriHi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf -
i am using jse 1.6 jee 1.5 icefaces 1.6 sun app server 9.0.
the application works fine until i will hit the back button. The error is:
[#|2007-10-08T14:50:56.441+0800|WARNING|sun-appserver-pe9.0|javax.enterprise.resource.webcontainer.jsf.lifecycle|_ThreadID=19;_ThreadName=httpWorkerThread-8080-0;_RequestID=2a6e47f0-fe67-493c-9dcf-6c05ff7a6d26;|executePhase(RENDER_RESPONSE 6,com.icesoft.faces.context.BridgeFacesContext@1716083) threw exception
javax.faces.FacesException: Can't parse stream for /css/admission/admission.css Content is not allowed in prolog.
at com.icesoft.faces.application.D2DViewHandler.renderResponse(D2DViewHandler.java:563)
at com.icesoft.faces.application.D2DViewHandler.renderView(D2DViewHandler.java:154)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at com.icesoft.faces.webapp.http.core.PageServer$1.respond(PageServer.java:26)
at com.icesoft.faces.webapp.http.servlet.ServletRequestResponse.respondWith(ServletRequestResponse.java:125)
at com.icesoft.faces.webapp.http.core.PageServer.service(PageServer.java:31)
at com.icesoft.faces.webapp.http.servlet.BasicAdaptingServlet.service(BasicAdaptingServlet.java:16)
at com.icesoft.faces.webapp.http.servlet.MultiViewServlet.service(MultiViewServlet.java:53)
at com.icesoft.faces.webapp.http.servlet.PathDispatcher$Matcher.serviceOnMatch(PathDispatcher.java:52)
at com.icesoft.faces.webapp.http.servlet.PathDispatcher.service(PathDispatcher.java:29)
at com.icesoft.faces.webapp.http.servlet.MainSessionBoundServlet.service(MainSessionBoundServlet.java:97)
at com.icesoft.faces.webapp.http.servlet.SessionDispatcher.service(SessionDispatcher.java:35)
at com.icesoft.faces.webapp.http.servlet.PathDispatcher$Matcher.serviceOnMatch(PathDispatcher.java:52)
at com.icesoft.faces.webapp.http.servlet.PathDispatcher.service(PathDispatcher.java:29)
at com.icesoft.faces.webapp.http.servlet.MainServlet.service(MainServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog.
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1685)
at com.icesoft.faces.webapp.parser.Parser.parse(Parser.java:122)
at com.icesoft.faces.application.D2DViewHandler.renderResponse(D2DViewHandler.java:557)
... 41 more
I have checked all the *.xml file and they are all ok...i've tried every solution i've found over the net but nothing seems to work....
plz help guys
ronaldIt looks to me like you have set up your servlet mappings to pass the CSS request through the FacesServlet. This is not the usual case, typically CSS is served directly.
-
Safari won't display XML content with an embedded stylesheet
I'm using Safari 5.0.2 on Windows XP. I cannot get it to display an XML document with an embedded CSS stylesheet. The file in question appears in this ZIP file: http://www.hl7.org/documentcenter/ballots/2011JAN/downloads/CDAR2IG_SDISP_R1_D12011JAN.zip
That document demonstrates is an attempt to enable display of standardized healthcare content in common web browsers. Can anyone here help?I have a separate bug report to Chrome on this one, same general result in display. The file is an XML document, not a CSS style-sheet. It contains an xml-stylesheet processing instruction that has a local URI #hl7-css-for-cda pointing to an element in the XML that contains the CSS stylesheet. That element uses xml:id to identify itself, so it is (according to the W3C) possible for the browser to determine that element as being the target of the URI.
The problem appears to be that the Display Engine in Safari won't load the content of that URI as a CSS stylesheet.
When I validate the CSS content in that XML element it returns as being valid CSS, and when I validate the XML using my XML editor, it is both well formed, and valid against the XML Schema appropriate to that file. -
Need help with mobily slider CSS
Hi there, I have found a really nice slider which you can see a demo here:
http://playground.mobily.pl/jquery/mobily-slider/demo.html
Basically, I am trying to get the bullets currently underneath the images to sit on top of the image, but whatever I try, I am not achieving what I want. I was wondering if you could give me some advice on where I on how to make it happen... please!
I can get one bullet to move up and sit on top, but then I loose all but the one bullet.
Here is the CSS:
#content {
width:900px;
.slider {
float:left;
width:900px;
height:305px;
position:relative;
padding-bottom:26px;
.sliderContent {
float:left;
width:900px;
height:305px;
clear:both;
position:relative;
overflow:hidden;
.sliderArrows a {
display:block;
text-indent:-9999px;
outline:none;
z-index:50;
background-image:url(../gfx/prev_next.png);
width:42px;
height:42px;
position:absolute;
top:50%;
margin-top:-34px;
.prev {
background-position:0 0;
left:15px;
.prev:hover {
background-position:0 -44px;
.next {
right:15px;
background-position:-44px 0;
.next:hover {
background-position:-44px -44px;
.sliderContent .item {
position:absolute;
width:900px;
height:305px;
background:#fff;
z-index:10;
.sliderBullets {
position:absolute;
bottom:0;
left:50%;
z-index:50;
margin-left:-45px;
.sliderBullets a {
display:block;
float:left;
text-indent:-9999px;
outline:none;
margin-left:5px;
width:10px;
height:11px;
background:url(../gfx/bullets.png) no-repeat;
.sliderBullets .active {
background-position:0 -13px;
.sliderContent a {
outline:none;
a {
color:#fff;
a img {
border:none;
Any guidance you could give is going to be appreciated.
Thanks in advance
MatAdd padding: 20px 0 0 0; to the css selector below, as shown.
.sliderContent {
padding: 20px 0 0 0;
float:left;
width:800px;
height:350px;
clear:both;
position:relative;
overflow:hidden;
Amend bottom: 0; to top: 0; on the css selector below, as shown:
.sliderBullets {
position:absolute;
top:0;
left:50%;
z-index:50;
margin-left:-45px;
That's it, Job done. -
Using CSS for Web dynpro application in EP
Hi,
I have some CSS (Style sheets) which I need to apply to the portal, so that all the web dynpro applications can have the same look and feel.
I read something about Theme Editor in EP. Can I somehow use that to import the CSS contents into the EP theme?
Any pointer to using CSS for Web Dynpro applications will be appreciated.
Thanks.
PuneetHi,
Go thorugh the follwing Web Dynpro Java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw04stack09themes.zip
To know how to use it and for the steps to be followed please follow the tutorial here
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to edit web dynpro themes.pdf
the last url gives you a step by step procedure with wizards..
Regards,
RK
Maybe you are looking for
-
I tried to delete start up disk files and messed up, galaxy screen only comes after I log in, no dock, won't take start up disk, can't get to utilities to try and fix it
-
Unable to assign wIPS profile to Controller (Mac address can not be found)
Guys and gals, I have been struggling with this one for a couple of days now and need some help. I am running NCS 1.1.24, and 7.2.110 on both my MSE and WLC. The WLC is synchronized with the MSE and my NMSP is active. Anyone ever seen this issue
-
SUBMIT...ALV
Hello, I am calling zreport1 giving alvlistoutput in background using SUBMIT zreport1 and return from another zreport. After generating spool output i want the itab alv contents obtain in reuse_alv_list_display to be displayed in zreport. I tried
-
hello to all: good newly I am beginning to use the whole technology of Oracle, beginning with the JDeveloper that not wise anything and now you something, good now what I would like that they help me it is like I can begin to carry out reports to be
-
I currently have a 3-year old G4 Powerbook w/ only 768mb of RAM. I'm looking to upgrade to a more powerful machine that can handle tons of large RAW files. My question is a two-parter: 1) I know Adobe PS CS2 is not universal, but what are the chances