CSS - http hangs

Config attached:
================
This config is very simple, but the customer has not given any information regarding the hang. He says that when the hang happens he can ping the vip address and the real IP addresses but http to the vip address does not respond. Just hangs. Rebooting the CSS resolves the problem.
I have asked for a scriptplay showtech at the time of the hang and the log file to see what is happening.
Are there any debug and show commands that could help in troubleshooting this problem at the time when the http connection to the vip address hangs.
Pointers to any URL will be good.

check if the service are alive [not with a ping but with a 'sho service summary']
I would recommend an upgrade to 8.10 or 8.20 as well since 7.50.103 is not the best option here.
Gilles.

Similar Messages

Cisco css http keepalive is not working with GET command

Dear all
i have Cisco Css connected to Dell Server (via switch)
Cisco CSS - 192.168.1.3 and Dell Server - 192.168.1.5
Dell server is setup with windows 2009R2 and Apache HTTPD is version 2.2
This server is dedicated to host multiple doamins with Apache lik
www.abc.co.uk
www.xyz.co.uk
Now the clinet wants to setup the http keepalive with specfic web page like /testpage.html for all these domains. i have teseed with single URI. it is working the comamnds are
config)# service serv1
(config-service[serv1])# ip address 192.168.1.5
(config-service[serv1])# keepalive type http
(config-service[serv1])# keepalive method head    ( get i have not used due to hash mismatch with apche server, if i use GET it is not working)
(config-service[serv1])# keepalive uri "/testpage.html"
(config-service[serv1])# active
It is working with single URI. but how can i do the same thing for multiple doamins ?
for multiple doamins do i need use script ? or can i use with commands ?
if i need to use script the script is
!no echo
! Filename: httptag-test
! Parameters: HostName WebPage HostTag
! Description:
!       This script will connect to the remote host and do an HTTP
!   GET method upon the web page that the user has asked for.
!   This script also adds a host tag to the GET request.
! Failure Upon:
!   1. Not establishing a connection with the host.
!       2. Not receiving an HTTP status "200 OK"
if ${ARGS}[#] "NEQ" "3"
        echo "Usage: httptag-test \'Hostname WebPage HostTag\'"
        exit script 1
endbranch
! Defines:
set HostName "${ARGS}[1]"
set WebPage "${ARGS}[2]"
set HostTag "${ARGS}[3]"
! Connect to the remote Host
set EXIT_MSG "Connection Failure"
socket connect host ${HostName} port 80 tcp
! Send the GET request for the web page
set EXIT_MSG "Send: Failed"
socket send ${SOCKET} "GET ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
! Send the HEAD request for the web page
set EXIT_MSG "Send: Failed"
socket send ${SOCKET} "HEAD ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
! Wait for a good status code
set EXIT_MSG "Waitfor: Failed"
socket waitfor ${SOCKET} "200 OK"
no set EXIT_MSG
socket disconnect ${SOCKET}sh w
exit script 0
in the script i have not used GET becasue, when CSS send GET request to apache it use hash, but apache is not able to respond with same hash and it shows that website is down. more information- click below url
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.40/command/reference/CmdKeepC.html#wp1139668
(config-keepalive) method
I have uploaded in CSS with httptag-test file and applied these commands
service comp.brit.co.uk-80
keepalive port 80
ip address 192.168.1.5
keepalive frequency 10
keepalive maxfailure 2
keepalive retryperiod 10
keepalive type script httptag-test "192.168.1.5 /testpage.html www.abc.co.uk
keepalive type script httptag-test "192.168.1.5 /testpage.html www.xyz.co.uk
but this script is not working
my question is:
1.do i need use script only to setup http keepalvie with webpage for multiple domains ?
2.with out using script is there any solution like CICSCO CSS commands to setup http uril for multiple domains which are on 1 singl server.
please help me asap

Hello Muhammad,
If you wish to use multiple domains for a URI keep-alive check, and perform a HEAD request what Daniel mentioned is correct. You have to use a scripted keep-alive check on the service. However, you should not use the default "ap-kal-httptag" script to do so as it's limited to only 1 website (unless you modify the script). You're best bet would be using the "ap-kal-httplist" script on the CSS as it allows the checking of 2 different websites along with a webpage to check for each site using HTTP HEAD method.
!no echo
! Filename: ap-kal-httplist
! Parameters: Site1 WebPage1 Site2 WebPage2 [...]
! Description:
!    This script will connect a list of sites/webpage pairs. The
!   user must simply supply the site, and then the webpage and
!   we'll attempt to do an HTTP HEAD on that page.
! Failure Upon:
!   1. Not establishing a connection with the host.
!   2. Not receiving a status code 200 on the HEAD request on any
!      one site. If one fails, the script fails.
! Make sure the user has a qualified number of arguments
if ${ARGS}[#] "LT" "2"
        echo "Usage: ap-kal-httplist \'WebSite1 WebPage1 WebSite2 WebPage2 ...'"
        exit script 1
endbranch
while ${ARGS}[#] "GT" "0"
        set Site "${ARGS}[1]"
    var-shift ARGS
    if ${ARGS}[#] "==" "0"
        set EXIT_MSG "Parameter mismatch: hostname present but webpage was not"
        exit script 1
    endbranch
    set Page "${ARGS}[1]"
    var-shift ARGS
    no set EXIT_MSG
    function HeadUrl call "${Site} ${Page}"
endbranch
exit script 0
function HeadUrl begin
! Connect to the remote Host
set EXIT_MSG "Connect: Failed to connect to ${ARGS}[1]"
socket connect host ${ARGS}[1] port 80 tcp 2000
! Send the head request
set EXIT_MSG "Send: Failed to send to ${ARGS}[1]"
socket send ${SOCKET} "HEAD ${ARGS}[2] HTTP/1.0\n\n"
! Wait for the status code 200 to be given to us
set EXIT_MSG "Waitfor: Failed to wait for '200' on ${ARGS}[1]"
socket waitfor ${SOCKET} " 200 " 2000
no set EXIT_MSG
socket disconnect ${SOCKET}
function HeadUrl end
Rather then modify the default "ap-kal-httplist" script on the CSS I would simply define the arguments within the service configuration itself.   Something like the following (using your service example):
service dell-192.168.1.5
ip address 192.168.1.5
keepalive type script ap-kal-httplist "www.abc.co.uk /testpage.html www.xyz.co.uk /testpage.html"
active
As long as the server is configured to reply to host headers, and the page is configured to retuen a "200 OK" the above service configuration should work. If there are any errors simply run "show service " to view why there was a failure. If there is a failure, and the output from the command specified shows a line number run the following command against the script to view at what point (line) did the failure occur:
show script ap-kal-httplist line-numbers
Hope this helps!
- Jason Espino

Safari not loading .css files / hanging page load

A bit of an odd one this...
I'm having a few issues a couple of websites in that the page takes an age to load - and when (if) it does, the CSS file hasn't loaded, so the page is unstyled.
One page is http://www.liverpoolfc.tv - the main page and the advert page before it both have the same issue.
From the activity report, this is because the browser is not completing the download of the file http://www.liverpoolfc.tv/lfc.css - although this will download fine if I download the file not as a part of the site.
The (Safari) activity report shows that the page's .css file is stalling, in this case at 8.0KB out of 8.6KB - this is consistent each time I try to load the page.
The problem occurrs in both Safari (3.2.1) and Firefox (3.0.6) on Mac OS X 10.5.6. It also happens with the current version of WebKit and Camino. The computer is up to date on all other relevant patches, including the recent Security Update, Java Update 3 and Flash.
I'm experiencing this problem with another website, again with the .css file not loading.
Similarly, I have two computers (both the same versions of software) and the problem is consistent between them.
What I've tried so far...
- resetting Safari
- deleting the cookies manually
- using a proxy server
- starting Safari in Rosetta
- using a copy of Safari without any user preferences (via the System Admin login)
None of these have made a difference. However, given that this is a problem across Safari, Firefox etc., I suspect this must be an issue in a shared component.
Any thoughts?

1. From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. From the menu bar, select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. Test.
3. From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Https hangs in Sun Application Server 9.0

Hi All,
We have recently moved our web application from Sun Application server 8.0 to Sun Application server 9.0. We have noticed that sometimes our web application hangs when switching from http to https connection. After doing netstat on the server found that lots of sockets are waiting in the CLOSE_WAIT status instead of the, I guess, the TIME_WAIT status.
Can anyone tell me the possible reasons for this and the solution to this problem.
As per some forums have also upgraded the jdk to 1.5.12 but to no avail. And there was no problem whatsoever when the application was deployed in SJAS 8.0
Thanks,
HKD

Try adding the following JVM option in domain.xml file.
<jvm-options>-Dcom.sun.enterprise.web.connector.useCoyoteConnector=true</jvm-options>

Calling web service with SSL (HTTPS) hangs client stub

If anyone can help it would make my day! I've spent way too much time on this!!!
I'm running:
- Web service is running on Linux RedHat with Oracle9iAS 9.0.3
- Client is running from Windows XP under Jdeveloper
I've successfully installed and run the web security demo "ws_security" at http://otn.oracle.com/sample_code/tech/java/web_services/wssecurity/ws_security.jar.
This demo goes through installing the web service, certificates, etc... and the demo runs fine. I'm also able to connect to the web service from a browser using https://server1:4443/CreditCardValidator/CreditCardValidator. I can download the proxy, look at the WSDL, etc...
Now I've written my own very simple stateless java class web service, deployed it to 9iAS , and then downloaded the proxy stub jar. Using the proxy stub I can call my web service and everything works fine.
Then I configure the web service to use HTTPS by making the following changes to the proxy stub (per the ws_security demo).
1) Copy the following 5 lines to the proxy stub
System.setProperty("ssl.SocketFactory.provider","oracle.security.ssl.OracleSSLSocketFactoryImpl");
System.setProperty("ssl.ServerSocketFactory.provider","oracle.security.ssl.OracleSSLServerSocketFactoryImpl");
System.setProperty("java.protocol.handler.pkgs","HTTPClient");
System.setProperty("oracle.wallet.location","C:\\Data\\Oracle\\WALLETS\\ws_security\\wallet.txt");
System.setProperty("oracle.wallet.password","thewalletpassword");
2) modify the "m_soapURL" by changing "http" to "https" and the port number to 4443
3) add the following 3 jar files to my projects library class list:
C:\Program Files\jdev9031\jlib\jssl-1_2.jar
C:\Program Files\jdev9031\jdk\jre\lib\ext\jcert.jar
C:\Program Files\jdev9031\lib\jsse.jar;C:\Program Files\jdev9031\jlib\javax-ssl-1_2.jar
When I run the proxy stub it just hangs. I've traced the hang to the "Response response = call.invoke(new URL(m_soapURL), soapActionURI);" statement in the "makeSOAPCallRPC" method in the proxy stub.
Again, this works fine if I simply change the "m_soapURL" to use "http" instead of "https". It looks like it's hanging on the client side and the call is never making it to the server.
Any help is GREATLY appreciated!!!!!

Could you explain it a little more, please.
Since my first message, I used the wallet manager to add the certificate the server where the web service is at, uses.
What else do I need to make it work??
Thanks in advance again.

Cisco CSS HTTP Redirects

All,
I have a number of web sites that are currently being load balanced by CSS 11503s runninng 8x code. I was recently requested to configure HTTP --> HTTPS redirects on the CSS for every site. In the past, I have only configured the redirects for sites that had a requirement. Now it appears that the server teams want all content encrypted.
1) What impact will this have on the CPU?
2) What impact will this have on Memory utilization?
3) Is there a maximum nubmer on redirects?
4) Are there other things I should be concerned about?
Thanks!

Hi Kevin,
As I mentioned there are two ways of doing redirects with the CSS, first is using services type redirect as you're doing and the second is using a redirect as a default action under a L5 content rule (this is where you would save some config lines).
i.e Let's say you have the site www.abz.com with 1 URI www.abz.com and www.abz.com/news; where news is balanced to a different server cluster.
In this case the configuration would look like this:
    content ABZ
      port 80
      protocol tcp
      vip address 192.168.10.10
      add service Web-1
      add service Web-2
      url "/*"
      active
    content ABZ-News
      port 80
      protocol tcp
      vip address 192.168.10.10
      add service Web-3
      add service Web-4
      url "/news/*"
      active
Now if you want to redirect all the content to HTTPS regardless of the URI to the main site https:///www.abz.com then you can just do a single content rule like this:
    content ABZ
      port 80
      protocol tcp
      vip address 192.168.10.10
      url "/*"
      redirect "https://www.abz.com"
      active
If you do need to keep the URI after the redirection; for example the new request to be like https://www.abz.com/news/ then you would do it with the type service redirect and the domain option as you're currently doing it.
HTH
Pablo

CSS 11800 healthcheck different HTTP version

For our 2 CSS switches running redundant ifc's, (1 active, other standby) we notice that the HTTP version, when performing a healthcheck, is different.
When uses a css HTTP version 1.0 or 1.1 to do a healthcheck?
Could there be a parameter to use always only 1 version.
Thanks,
Wim

Wim,
normally the CSS uses 1.1 but it will first start by sending 1.0 and then switch to 1.1
You can force 1.0 with the command 'keepalive type http non-persistent'
There are also a bug that was fixed for a problem of version.
CSCed85319 - CSS incorrectly bumping 1.1 keepalive to 1.0
You should verify that you have the fix.
Regards,
Gilles.

Html/css page out of line in firefox

hi there,
i've created a html page layout and then put the blog coding in and it looks fine in all browsers (and even the phones in my house) EXCEPT for firefox.
just wondering if anyone had any input they could offer? it would be much appreciated. the other pages are fine, but here's the link to the blog: http://voicegeek.net/news/
denise

When things go wrong, validate your code and fix reported errors. That's the first step in solving layout problems.
HTML errors:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fvoicegeek.net%2Fnews%2F
CSS:
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fvoic egeek.net%2Fnews%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I need help with CSS and floating

Okay, I know I need to get up on CSS and get rid of tables in
my sites.
However, I'm running up against a problem, and after banging
my head
against it for a while, I realize I need help. I've stripped
this down
so as to only show the area where I'm having difficulty.
What I want is a page that has everything down the center,
taking up no
more than 750 pixels and no more than 550 pixels of width. No
problem there.
After the header and the top content, I'd like to have two
"columns",
each in it's own separately-colored box. I would like the
right-side
column/box to be a static size, while the left-side
column/box sizes
dynamically.
Where I'm having problems is that when one column is boxed,
it's fine,
but whenever I wrap each column in its own box, the
fixed-size box
either jumps below or above the other box (depending on which
one has
been floated and which order the div's appear in the code).
Here are the links:
CSS:
http://www.afice.org/stylesheet/floatmestyles.css
ex 1:
http://www.afice.org/floatme1.html
ex 2:
http://www.afice.org/floatme2.html
Before sending, I took a look again, just to see if I was
missing
anything. I did notice that it doesn't seem to be that the
box is
jumping down so much as it is that it's getting written over.
Anyway, sorry for the long-winded explanation. I hope I've
managed to
explain what I'm trying to do well enough that someone can
tell me where
I'm going wrong.
Thanks,
--Kevin

Do you want something like this:
http://www.pmob.co.uk/temp/spointfooter.htm
You will need to look at the code to see how it was done.
Otherwise, there are different examples here on Pauls' site:
http://www.pmob.co.uk/temp/3colfixedtest_4.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"Kevin D-R" <[email protected]> wrote in
message
news:[email protected]...
> Okay, I know I need to get up on CSS and get rid of
tables in my sites.
> However, I'm running up against a problem, and after
banging my head
> against it for a while, I realize I need help. I've
stripped this down so
> as to only show the area where I'm having difficulty.
>
> What I want is a page that has everything down the
center, taking up no
> more than 750 pixels and no more than 550 pixels of
width. No problem
> there.
>
> After the header and the top content, I'd like to have
two "columns", each
> in it's own separately-colored box. I would like the
right-side column/box
> to be a static size, while the left-side column/box
sizes dynamically.
>
> Where I'm having problems is that when one column is
boxed, it's fine, but
> whenever I wrap each column in its own box, the
fixed-size box either
> jumps below or above the other box (depending on which
one has been
> floated and which order the div's appear in the code).
>
> Here are the links:
>
> CSS:
http://www.afice.org/stylesheet/floatmestyles.css
>
> ex 1:
http://www.afice.org/floatme1.html
>
> ex 2:
http://www.afice.org/floatme2.html
>
> Before sending, I took a look again, just to see if I
was missing
> anything. I did notice that it doesn't seem to be that
the box is jumping
> down so much as it is that it's getting written over.
>
> Anyway, sorry for the long-winded explanation. I hope
I've managed to
> explain what I'm trying to do well enough that someone
can tell me where
> I'm going wrong.
>
> Thanks,
>
> --Kevin

CSS (some, not all) not showing up in browser, but fine in DW. Plus other desperate issues....

I would really appreciate any and all help I can get to solve these problems as I'm new to CSS/HTML (completely new) and have been attempting to code my design just well enough to get it uploaded and working as a site. Once I can atleast achieve this feat, I plan on completely converting to CSS. But for now, I need to get the site working and I really didn't want to come and bother all of you on here with my problems and have been procrastinating posting on here for absolutely ages now....but since I can't figure all of the messy-uppy ness going on on my own, I beg forgiveness for any of your time wasted on my problems .
Okay, so the "main" issue here is that I can see some(some, not all) CSS on DW, but I see NONE whatsoever when I go to preview in browser, same after uploading. I do have all of the files uploaded and placed in the correct directories, including the stylesheet, and images folder. But, nope, nada. Now, I did think this was a root/directory problem, maybe the url's weren't pointing to the right directories. I checked and attempted to fix this several times and any changes made no difference. Also, uploaded to the root of my site, where all files and folders are where they should be, yet no change. I am utterly clueless as to what is going on here....
Second: Padding, or margins added through CSS for the divs is simply not working in DW or otherwise. I have padding placed on all of the content type areas with writing/content in them and despite the fact that the changes to the font/text formatting I've made show up, the padding does not. This is only in DW since no CSS whatsoever is showing out of DW anyways. I would like to know how to get the padding and the formatting, just all of the CSS in general to actually show up in browser/when uploaded.
Third: The next issue is also confusing, and this only occured after I made the page into a template and uploaded the home.htm page I created from it to my site. For some reason, the image called "../images/aurora2_14_content_marg.gif". Is appearing at the very top of the page for no reason at all. I don't understand why it is there, or how it even got up there in the first place.
Fourth: This was actually next on my list of things to figure out once I've gotten all of the above issues taken care of but since I'm still drawing a blank after 2+ weeks on how to get this done in a way that will work I guess it couldn't hurt to ask on here and get some expertise on the matter. The issue is that I have a repeating background (images/bg.png) that I want stretching downwards as I add content to the page. I have this placed as the main background for the entire site as you will be able to see in a moment through my code/site. Now, the place I want this to start is from where the aforementioned image (../images/aurora2_14_content_marg.gif) stops. However, I want the content to actually start from 20 pixels or so from the top of that very image. I want to try and achieve this through the use of margins but since the margins and padding are not showing up I hve been unable to experiment with it enough to figure out any other way to achieve this. Any suggestions on how to achieve this would be much appreciated.
Fifth (yes, unfortunately we're still going): As you may be able to see through the design I have two seperate areas for the main content and the navigation and other such items to be placed. To clarify, the content will be placed(through the use of expandable content boxes, once I figure out how to work that) beginning at the aforementioned image/td/div (../images/aurora2_14_content_marg.gif) with a bit of padding or margin from the top and sides (too pull the content towardsthe center of the site rather than all over from left to right like it is appearing now). The navigation etc will be placed where the long cyan area is under the search bar. For both of these, I cannot figure out how to split my one background image and also the content_marg.gif image into the two divs/or whatever else would work to split their contents from eachother. I think that seperating them into 2 divs with padding from the sides and eachother and seperate top paddings (I want the navigation to begin more near the top of the page than the content). The issue here is, I cannot figure out how to do this.
Any and all suggestions would be greatly appreciated. Also, any tips on how to achieve the code for the solutions provided would also be very much appreciated, as I am only just starting out coding.
The site/page:
http://aurora.comeze.com/home.htm
The stylesheet (style.css):
http://aurora.comeze.com/style.css
Like I mentioned above, all of this except the padding shows up in DW. Whereas, none of this shows up at all in browser view, or through the site.

Summary of issues #1 through #5:
Code errors galore:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Faurora.comeze.com%2Fhome.htm
Photoshop generated HTML.
20th century table based layout with endless spacer gifs.
START OVER
From Tables to CSS Web Design Part 1 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
From Tables to CSS Web Design Part 2 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
=========================
DW Starter Pages (CSS Layouts)
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
=========================
Taking a Fireworks (or Photoshop) comp to a CSS Layout in DW
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
========================
HTML & CSS Tutorials - http://w3schools.com/
Learn CSS positioning in 10 Steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
========================
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Changed a Library Item and now my CSS no longer works!

I am so frustrated I am almost in tears. I created a menu in a roughly 7 page website and used DW Library menu to put it on additional pages. Everything was working fine and then I changed a path to one of my links and hit the button to update the rest of the pages and that's when it happend. My CSS was gone, no longer applying to any of my menus. I created an additional CSS sheet just to style my menu and it worked fine up until I changed a frickin link to one my menu icons. Now my CSS sheets won't apply at all. I have no idea what has happened and why me changing the path of a link would void out my styles. Has anyone else had this happen? Suggestions are greatly appreciated. Thanks!

I don't want to rub salt into your wounds here, but why are you using Library Items for menus? That's what DW Templates are for.
http://www.smartwebby.com/web_site_design/dreamweaver_template.asp#1
Or better still, Server-Side Includes.
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Shortcomings of Library Items: they cannot be inserted into the <head> tags of documents. Nor can they contain code that belongs in the <head> tags. Library items can only be inserted into the <body> tags.
My advice is to run your code through the online validation tools below and fix reported errors.
HTML - http://validator.w3.org/
CSS - http://jigsaw.w3.org/css-validator/
If you can't solve the problem yourself, upload page(s) and supporting files to a public web space you control and post the URL here.
Nancy O.

CSS Level 2 Support for RGB Hex Abbreviation

when creating a style sheet during the tutorial in
Flash 8: Training from the Source, i abbreviated my hex
colors as usual when i have repeating pairs (in this particular
case #999 instead of #999999) and the publised Flash page would not
display the correct color. it displayed black text instead of gray.
after changing the #999 to the full #999999, the republished
Flash page displayed the page correctly. I understand from the book
Flash 8 does not support level 2 CSS, which includes more than my
simple abbreviation issue.
when do you (Adobe Flash Team) expect to incorporate CSS
level 2 support into the product? is it supported by Flex 2, as I
am not too familiar with that platform yet?
thank you,

Hi Mike,
OHJ uses the ICE Browser, which we license from a company named ICESoft. It generally compares favorably with other Java-based browsers, although it is not as complete as a native browser such as IE or Firefox.
There is a list of what is and is not supported in CSS:
http://www.icesoft.com/developer_guides/icebrowser/htmlguide/featuresappendix3.html#86328
We recently finally resolved the licensing issues that were holding us back from releasing a version of OHJ with JavaScript support. The current versions don't support JavaScript, but our next major release will.
Depending on your needs, we also have OHW, which is a server based help system, that uses the client's native browser.
Regards,
Jeffrey Stephenson
Oracle

Dw does not recognize css rules.

As all know when a CSS file opens in Dw in the left side of the window(in the CODER view) we can find the CSS styles pane where the CSS properties are listed.
When i click to css rule code segment to the open document, automatically, the pane in the left, demonstrates the relevant properties.
Lately, this does not happen in a specific CSS document i am working on. It works fine in other documents but in a specific one, this feature does not work-except in very few rules, rules relative to the body tag for instance.
Why that?
What might be wrong with other rules and their properties are not demonstrated in the CSS pane?
Any ides?
Another strange thing is the fact that when i click the all button in the CSS pane, only 6 rules appear(in the tree structure) despite the fact that the document is full of rules.
As a result it is only these 6 rules that their properties are listed in the CSS pane when I click the corresponding code segment in the main editor window.

<Lately, this does not happen in a specific CSS document i am working on...>
Validate your code and fix reported errors (excluding Spry hacks for legacy browsers).
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Viewing CSS at properties bar

Hi everyone
My problem (well not a problem but) with Adobe Dreamveawer is viewing css styles at properties bar. At Adobe Dreamveawer CS3 you could see the background, font type, color etc in short as you designed. This useful function is seems disabled or hidden. I have tried to view all help files and didn't find anything. Does anyone knows how to resolve this issue? Thanks for replies.

In the CS4 Property Inspector, you have two buttons: HTML and CSS.
http://forums.adobe.com/servlet/JiveServlet/showImage/2-2032992-5277/property_inspector_12 0dpi.png
You can view either CSS or HTML (but not both) at any one time by toggling these buttons.
I am not a fan of these buttons. I'd prefer to see both CSS and HTML info next to each other simultaneously.

CSS background container color not "showing through" ?

Hi all-
I know this may be a basic CSS question but as I'm just now getting into doing it by hand, I'm looking more closely at how things work (or don't seem to) and can't figure this one out.
Here's the example:
http://www.turnerdesign.com/testsite/
and the css:
http://www.turnerdesign.com/testsite/test.css
I have #container as a green color, but it doesn't show in the gap to the right of #rightColumn.
I think it has something to do with the way floats work... uh... or something
Any help appreciated!
thanks,
Andrew

Wow, thanks guys.
Looks like I have some reading to do. Odd thing is, I don't see where the "overflow" is actually occurring. Maybe I'm misinterpreting the definition.
But I have to read it a few more times...
I'm trying to choose which one "solved" this!
thanks again,
Andrew

CSS - http hangs

Similar Messages

Maybe you are looking for