Csv-export with dynamic filename ?

I'm using the report template "export: CSV" to export data to a csv-file. It works fine with a static file name. Now, I would like to have a dynamic file name for the csv-file, e.g. "ExportData_20070209.csv".
Any ideas ?

Ran,
This is a procedure, which will export result of any query into a flat file in your directory:
PROCEDURE export_rep_to_bfile (
      p_query       IN   VARCHAR2,
      p_directory   IN   VARCHAR2,
      p_filename    IN   VARCHAR2 DEFAULT 'export_csv.csv',
      p_delimiter   IN   VARCHAR2 DEFAULT ';',
      p_coll_name   IN   VARCHAR2 DEFAULT 'MY_EXP_COLL'
   IS
      v_file            UTL_FILE.file_type;
      v_column_list     DBMS_SQL.desc_tab;
      v_column_cursor   PLS_INTEGER;
      v_number_of_col   PLS_INTEGER;
      v_col_names       VARCHAR2 (4000);
      v_line            VARCHAR2 (4000);
      v_delimiter       VARCHAR2 (100);
      v_error           VARCHAR2 (4000);
      v_code            VARCHAR2 (4000);
   BEGIN
      -- Get the Source Table Columns
      v_column_cursor := DBMS_SQL.open_cursor;
      DBMS_SQL.parse (v_column_cursor, p_query, DBMS_SQL.native);
      DBMS_SQL.describe_columns (v_column_cursor,
                                 v_number_of_col,
                                 v_column_list
      DBMS_SQL.close_cursor (v_column_cursor);
      FOR i IN v_column_list.FIRST .. v_column_list.LAST
      LOOP
         v_col_names :=
                   v_col_names || p_delimiter
                   || (v_column_list (i).col_name);
      END LOOP;
      v_col_names := LTRIM (v_col_names, ';');
      v_file := UTL_FILE.fopen (p_directory, p_filename, 'W');
      UTL_FILE.put_line (v_file, v_col_names);
      --for ApEx when used outside of ApEx
      IF htmldb_collection.collection_exists (p_collection_name      => p_coll_name)
      THEN
         htmldb_collection.delete_collection
                                            (p_collection_name      => p_coll_name);
      END IF;
      htmldb_collection.create_collection_from_query
                                            (p_collection_name      => p_coll_name,
                                             p_query                => p_query
      COMMIT;
      v_number_of_col := 50 - v_number_of_col;
      FOR i IN 1 .. v_number_of_col
      LOOP
         v_delimiter := v_delimiter || p_delimiter;
      END LOOP;
      FOR c IN (SELECT c001, c002, c003, c004, c005, c006, c007, c008, c009,
                       c010, c011, c012, c013, c014, c015, c016, c017, c018,
                       c019, c020, c021, c022, c023, c024, c025, c026, c027,
                       c028, c029, c030, c031, c032, c033, c034, c035, c036,
                       c037, c038, c039, c040, c041, c042, c043, c044, c045,
                       c046, c047, c048, c049, c050
                  FROM htmldb_collections
                 WHERE collection_name = p_coll_name)
      LOOP
         v_line :=
            RTRIM (   c.c001
                   || p_delimiter
                   || c.c002
                   || p_delimiter
                   || c.c003
                   || p_delimiter
                   || c.c004
                   || p_delimiter
                   || c.c005
                   || p_delimiter
                   || c.c006
                   || p_delimiter
                   || c.c007
                   || p_delimiter
                   || c.c008
                   || p_delimiter
                   || c.c009
                   || p_delimiter
                   || c.c010
                   || p_delimiter
                   || c.c011
                   || p_delimiter
                   || c.c012
                   || p_delimiter
                   || c.c013
                   || p_delimiter
                   || c.c014
                   || p_delimiter
                   || c.c015
                   || p_delimiter
                   || c.c016
                   || p_delimiter
                   || c.c017
                   || p_delimiter
                   || c.c018
                   || p_delimiter
                   || c.c019
                   || p_delimiter
                   || c.c020
                   || p_delimiter
                   || c.c021
                   || p_delimiter
                   || c.c022
                   || p_delimiter
                   || c.c023
                   || p_delimiter
                   || c.c024
                   || p_delimiter
                   || c.c025
                   || p_delimiter
                   || c.c026
                   || p_delimiter
                   || c.c027
                   || p_delimiter
                   || c.c028
                   || p_delimiter
                   || c.c029
                   || p_delimiter
                   || c.c030
                   || p_delimiter
                   || c.c031
                   || p_delimiter
                   || c.c032
                   || p_delimiter
                   || c.c033
                   || p_delimiter
                   || c.c034
                   || p_delimiter
                   || c.c035
                   || p_delimiter
                   || c.c036
                   || p_delimiter
                   || c.c037
                   || p_delimiter
                   || c.c038
                   || p_delimiter
                   || c.c039
                   || p_delimiter
                   || c.c040
                   || p_delimiter
                   || c.c041
                   || p_delimiter
                   || c.c042
                   || p_delimiter
                   || c.c043
                   || p_delimiter
                   || c.c044
                   || p_delimiter
                   || c.c045
                   || p_delimiter
                   || c.c046
                   || p_delimiter
                   || c.c047
                   || p_delimiter
                   || c.c048
                   || p_delimiter
                   || c.c049
                   || p_delimiter
                   || c.c050,
                   v_delimiter
         UTL_FILE.put_line (v_file, v_line);
      END LOOP;
      UTL_FILE.fclose (v_file);
      IF htmldb_collection.collection_exists (p_collection_name      => p_coll_name)
      THEN
         htmldb_collection.delete_collection
                                            (p_collection_name      => p_coll_name);
      END IF;
      COMMIT;
   EXCEPTION
      WHEN OTHERS
      THEN
         IF DBMS_SQL.is_open (v_column_cursor)
         THEN
            DBMS_SQL.close_cursor (v_column_cursor);
         END IF;
         v_error := SQLERRM;
         v_code := SQLCODE;
         raise_application_error (-20001,
                                     'Your query is invalid!'
                                  || CHR (10)
                                  || 'SQL_ERROR: '
                                  || v_error
                                  || CHR (10)
                                  || 'SQL_CODE: '
                                  || v_code
                                  || CHR (10)
                                  || 'Please correct and try again.'
                                  || CHR (10)
   END export_rep_to_bfile;You may adjust this to get a report query, by doing the following:
DECLARE
   x   VARCHAR2 (4000);
BEGIN
   SELECT region_source
     INTO x
     FROM apex_application_page_regions
    WHERE region_id = TO_NUMBER (LTRIM (p_region, 'R'))
      AND page_id = p_page_id
      AND application_id = p_app_id;
END;which will get your region query.
...and there you go.
Denes Kubicek

Similar Messages

Csv-export with dynamic filename or include a report footer?

Hi All,
I have a question regarding the exported csv file contains a variable value as part of the file name.
I read the following thread and example from Denes here:
http://htmldb.oracle.com/pls/otn/f?p=31517:39:2021865942697087
How to generate Excel file name
I created a test page per instruction and I could successfully duplicate the effort and verified the csv file contains the variable value if I click on 'export to CSV' from the link.
However, the application I am working on is slightly different. Basically in page 1, there is a 'download' button which branches to the page 2. And in page 2, in Layout and Pagination section, the value for the Report Template is set to Export CSV. In REport Export session, I set enable CSV output to Yes and file name is: &P20_REPORT_DATE..csv. Of course, I also have a hidden item &P20_REPORT_DATE whose value gets set in page process before header. Note: in this case, the user never really see the search results on screen when they click on the 'download' button which is different from the above example.
When I run the application, the file name simply doesn't show up correctly, instead it is &P20_REPORT_DATE.csv. It appears that the value of the P20_REPORT_DATE is never set.
Also, is there any way I could include a report header or footer to indicate when the report is generated?
Your help is greatly appreciated.
Thanks,

Hi all,
I'm using Application Express 3.1.1.00.09.
What I want to do is include the current date in the report filename. I created an item on Page 0 called P0_CURR_DATE, which is the value of "select current_date from dual". So, the filename I attempted to create is Vendor_&P0_CURR_DATE._report (notice the & and the . are included).
When I click the report csv report link, the popup window shows file name as Vendor__report.csv (that's two underscore characters with no characters in-between).
I think that I have figured out my problem. I originally created the item on Page 0, as "Display as Text (does not save state)". So, after I change the item to "Display as Text (saves state)", the csv report filename becomes Vendor_28-JUL-08_report.csv .
I guess that's the pitfalls of being a newbie!
Thanks to all who offered help and suggestions.
Bryan
Message was edited by:
BryanG

Reporting Services Auto Export to PDF on a shared location with dynamic filename

Hi Guys,
I have this ERP system that is calling a url with the Document No parameter, the link automatically converts to a PDF but comes up with the OPEN/SAVE/CANCEL box however i want to automatically save to a default location...is this possible?
Secondly i need the filename to be saved as the Paramter Name and the date.pdf in the format DocumentNo- Datetime.pdf is this also possible?
Thank you in Advance

Hi Dan,
According to your description, you want to export a report to PDF using URL access. And trying to export the report with specify name automatically without prompting the OPEN/SAVE/CANCEL box. The file name should come from the parameters of the report.
For security reasons, it is not allowed to write files on a client computer (Shared folder), except for a few pieces of information in cookies.
While using URL access to export a report, the exporting process will save the file with the report’s name automatically.
In order to export the report to a specify folder with a specify name, we can send a request to the Report Server in custom application, and then receive the data from the Report Server. In the custom application, save the data to the specify folder with the specify name in server side.
Please follow these steps to archive the target:
1.       Create a C# Web application.
2.       In the page_load event of a page, embed the following code:
string URL = "http://localhost/Reportserver?/AdventureWorks Sample Reports/Employee Sales Summary";
            string Command = "Render";
            string Format = "PDF";
            //We can get values of these parameters from Request object.
            string paramReportMonth = "12";
            string paramReportYear = "2003";
            string paramEmpID = "288";
            URL = URL + "&rs:Command=" + Command + "&rs:Format=" + Format + "&ReportMonth=" + paramReportMonth + "&ReportYear=" + paramReportYear +"&EmpID=" + paramEmpID;
            System.Net.HttpWebRequest Req = (System.Net.HttpWebRequest) System.Net.WebRequest.Create(URL);
            Req.Credentials = System.Net.CredentialCache.DefaultCredentials;
            Req.Method = "GET";
            //Specify the path for saving.
            string path = @"C:\" + paramEmpID + "-" + paramReportYear + "-" + paramReportMonth + @".pdf";
            System.Net.WebResponse objResponse = Req.GetResponse();
            System.IO.FileStream fs = new System.IO.FileStream(path, System.IO.FileMode.Create);
            System.IO.Stream stream = objResponse.GetResponseStream();
            byte[] buf = new byte[1024];
            int len = stream.Read(buf, 0, 1024);
            while (len > 0)
                fs.Write(buf, 0, len);
                len = stream.Read(buf, 0, 1024);
            stream.Close();
            fs.Close();
3.       Use the URL of the above page with parameters to export a report to the specify folder with specify filename.
E.g. http://<server>/custom application/export.aspx?parameterReportYear=2003&parametermonth=12&EmpId=288
Of course, we can pass other parameters with the URL such as Format.
Please feel free to ask, if you have any more questions.
Thanks,
Jin Chen
Jin Chen - MSFT

Export with dynamic file name

Hi everyone.
I want to know how export oracle tables with dynamic file name on windows XP platform.
bye.

You'd have to generate the export command-line or par file using a script -- Windows or SQL !
It would be easy to use SQL to generate the script.
So you could have a BATch file that
a. Calls the SQL to generate the export command-line or parfile
b. Executes the export
even possibly run in a loop.
Hemant K Chitale

Picking files from FTP server with dynamic Filename.

Hello Experts,
I want to pick some files from a FTP server in a File to Idoc scenario. The files in the Ftp Server are created with the filenames as timestamp of the file when it was created. How do I pick up these files?
Thanks,
Merrilly

Hi,
The above masking concept (*.txt, . etc) will be applicable for the files with NFS only,
See the below link to apply it
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
The below link will help you to build up the adapter module to read the dynamic file name
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da5675d1-0301-0010-9584-f6cb18c04805
This could be applicable for FTP ...
Thanks
Swarup

Extremely slow PP Export with Dynamic Links

I have very slow exports from Premiere Pro that are entirely made with Dynamic Links to AE (green screen footage).
It's taking about 4+ hours to export a 12 minute video!
I'm on an iMac late 2012
3.2 GHz Intel Core i5
24 GB 1600 MHz DDR3
NVIDIA GeForce GTX 675MX 1024 MB
OS Yosemite
Footage is on an external HD
Project file is on main HD
Writing exported file to external HD
I've followed several troubleshooting tips including:
Uninstall and re-install CC 2014
Clean adobe media files
Check permissions on all folders
Switch Open CL to Software Only
Unchecked "Display out of sync indicators for unlinked clips"
Disabled "Show Duplicate Frame Markers"
Disabled "Show FX Badges"
I've also tried changing the location of where the final file is written to.
I've also tried this on my MBP with 2.3 GHz Intel Core i7, 8 GB RAM and AMD 6750M
Same results.
Any ideas? Am I missing something obvious here?
Thanks.

Wrong forum. This is the hardware forum for hardware related posts.

Export query results to flat file with dynamic filename

Hi
Can anybody can point me how to dynamic export query serults set to for example txt file using process flows in OWB.
Let say I have simple select query
select * from table1 where daterange >= sysdate -1 and daterange < sysdate
so query results will be different every day because daterange will be different. Also I would like to name txt file dynamicly as well
eg. results_20090601.txt, results_20090602.txt, results_20090603.txt
I cant see any activity in process editor to enter custom sql statment, like it is in MSSQL 2000 or 2005
thanks in advance

You can call existing procedures from a process flow the procedure can create the filename with whatever name you desire. OWB maps with file as target can also create a file with a dynamic name defined by an expression (see here ).
Cheers
David

Load XML with dynamic filename

Hi,
I am trying to create a load xml function where I can send
the filname to load to the function, however I get a syntax error
with the following function, can anyone see what is wrong here?
function loadXML(file){
myXML:XML = new XML();
myXML.ignoreWhite = true;
myXML.onLoad = function(success) {
if (success) {
// Success
} else {
// fail
myXML.load(path+file);
Thanks for your advice

I was trying to do the same thing and came across this great
tutorial. I think your syntax is just a little off.
myXML=new XML();
myXML.ignoreWhite=true;
myXML.onLoad=function(ok){
if(ok){
//trace('data loaded');
allData=this.firstChild.childNodes;
for(i=0;i<allData.length;i++){
trace(allData
.attributes.text);
}else{
trace('error');
myXML.load('gridTest.xml');
<?xml version="1.0" encoding="iso-8859-1"?>
<nav>
<but text="home">
<heading>You are at Home</heading>
<content>This is the text that is displayed when click
on home</content>
</but>
<but text="About Us">
<heading>You are at the about us
section</heading>
<content>This is the text that is displayed when click
on about us</content>
</but>
<but text="Contact"></but>
<heading>You are at Contact</heading>
<content>This is the text that is displayed when click
on Contact</content>
</nav>

How to generate a second csv file with different report columns selected?

Hi. Everybody:
How to generate a second csv file with different report columns selected?
The first csv file is easy (report attributes -> report export -> enable CSV output Yes). However, our users demand 2 csv files with different report columns selected to meet their different needs.
(The users don't want to have one csv file with all report columns included. They just want to get whatever they need directly, no extra columns)
Thank you for any help!
MZ

Hello,
I'm doing it usually. Typically example would be in the report only the column "FIRST_NAME" and "LAST_NAME" displayed whereas
in the csv exported with the UTL_FILE the complete address (street, housenumber, additions, zip, town, state ... ) is written, these things are needed e.g. the form letters.
You do not need another page, just an additional button named e.g. "export_to_csv" on your report page.
The csv export itself is handled from a plsql procedure "stored procedure" ( I like to have business logic outside of apex) which is invoked by pressing the button "export_to_csv". Of course the stored procedure can handle also parameters
An example code would be something like
PROCEDURE srn_brief_mitglieder (
     p_start_mg_nr IN NUMBER,
     p_ende_mg_nr IN NUMBER
AS
export_file          UTL_FILE.FILE_TYPE;
l_line               VARCHAR2(20000);
l_lfd               NUMBER;
l_dateiname          VARCHAR2(100);
l_datum               VARCHAR2(20);
l_hilfe               VARCHAR2(20);
CURSOR c1 IS
SELECT
MG_NR
,TO_CHAR(MG_BEITRITT,'dd.mm.yyyy') AS MG_BEITRITT ,TO_CHAR(MG_AUFNAHME,'dd.mm.yyyy') AS MG_AUFNAHME
,MG_ANREDE ,MG_TITEL ,MG_NACHNAME ,MG_VORNAME
,MG_STRASSE ,MG_HNR ,MG_ZUSATZ ,MG_PLZ ,MG_ORT
FROM MITGLIEDER
WHERE MG_NR >= p_start_mg_nr
AND MG_NR <= p_ende_mg_nr
--WHERE ROWNUM < 10
ORDER BY MG_NR;
BEGIN
SELECT TO_CHAR(SYSDATE, 'yyyy_mm_dd' ) INTO l_datum FROM DUAL;
SELECT TO_CHAR(SYSDATE, 'hh24miss' ) INTO l_hilfe FROM DUAL;
l_datum := l_datum||'_'||l_hilfe;
--DBMS_OUTPUT.PUT_LINE ( l_datum);
l_dateiname := 'SRNBRIEF_MITGLIEDER_'||l_datum||'.CSV';
--DBMS_OUTPUT.PUT_LINE ( l_dateiname);
export_file := UTL_FILE.FOPEN('EXPORTDIR', l_dateiname, 'W');
l_line := '';
--HEADER
l_line := '"NR"|"BEITRITT"|"AUFNAHME"|"ANREDE"|"TITEL"|"NACHNAME"|"VORNAME"';
l_line := l_line||'|"STRASSE"|"HNR"|"ZUSATZ"|"PLZ"|"ORT"';
     UTL_FILE.PUT_LINE(export_file, l_line);
FOR rec IN c1
LOOP
     l_line := '"'||rec.MG_NR||'"';
     l_line := l_line||'|"'||rec.MG_BEITRITT||'"|"' ||rec.MG_AUFNAHME||'"';
     l_line := l_line||'|"'||rec.MG_ANREDE||'"|"'||rec.MG_TITEL||'"|"'||rec.MG_NACHNAME||'"|"'||rec.MG_VORNAME||'"';
     l_line := l_line||'|"'||rec.MG_STRASSE||'"|"'||rec.MG_HNR||'"|"'||rec.MG_ZUSATZ||'"|"'||rec.MG_PLZ||'"|"'||rec.MG_ORT||'"';
--     DBMS_OUTPUT.PUT_LINE (l_line);
-- in datei schreiben
     UTL_FILE.PUT_LINE(export_file, l_line);
END LOOP;
UTL_FILE.FCLOSE(export_file);
END srn_brief_mitglieder;Edited by: wucis on Nov 6, 2011 9:09 AM

Dynamic Filename in BPM process (SOAP with attachm. and PayloadSwapBean)

Hello together
I have the following BPM process:
1. IDoc=>WebServiceRequest
2. WebServiceResponse (payload) => IDoc
3. WebServiceResponse (attachment) => File
XI receivs an IDoc an map it to an WebService. The Webservice is called by XI and we receive the WebServiceResponse including a PDF attachment.
The challenge is to store the PDF attachment with a dynamic filename from the payload of WebServiceResponse.
We use the PayloadSwapBean to change the payload to the PDF attachment. But then we are not able to access the required information on the original WebService-XML-Response via variable substitution.
Is there a solution in the standard or have we to use a custom adapter module?
Thx
manuku

Hi Jayasimha,
We can do this by "Adapter Specific Message Properties" of ur comunication channels.
1.If u want to keep the output filename same as input filename, no need to use the UDF. only the 'adapter specific parameters' in both sender n receiver file adapter will do that.
In case if u want to get the filename inside our mapping we have to create a user defined function
which will return the filename and map it to one of our XML tags. 2nd point gives solution 4 that:
2. If u want to generate an output file taking some input from the payload,then u hav to use the UDF.There u hav to populate the name.
Pretty much.... if you set an attribute from the sender side, for example, you can use a UDF and access the particular attribute sent and use it in the mapping. In another example, where no attributes are sent from the sender, you can still actually set a particular attribute, say a filename derived from the payload, using a UDF, and enable the receiver attribute to use it. That's where the UDFs come in - either to get or set particular adapter specific message attributes.
This will be a very helpful blog which solves ur query:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Vinod.

How to give dynamic name for csv export files?

Hi,
how we can give dynamic file name for each csv export file? ex(&item_name.csv)
I am using apex 4.1 and IE 6,
thanks in advance
regards
Chandran

Please help me on this
I am using report template as a csv export..
when user click on download link on other page he will redirect to csv export temlate page and he is is directly get the open or save window
but dynamic title name is not working for only for this.
regards
Chandran

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Dynamic column heading in csv export not working

Hi,
I have a SQL report where the column headings are defined dynamically. for an example let's say I have a report
SELECT NAME, TODAY'S_DATE FROM TABLE A.
Under report attribute column I have defined column heading as "&P_todays_date.”. This item has source value “Select sysdate from dual. When I export the data into csv file the dynamic column headings are coming as blank.
Any suggestions?
Thanks,
Manish

You are posting this question in the PeopleSoft forums. I think it belongs in the BI section:
https://forums.oracle.com/forums/category.jspa?categoryID=16

Slow PPr Export with all Dynamic Links

I have very slow exports from Premiere Pro that are entirely made with Dynamic Links to AE (green screen footage).
It's taking about 4+ hours to export a 12 minute video! Without the dynamic links, it takes about 20 minutes.
I'm on an iMac late 2012
3.2 GHz Intel Core i5
24 GB 1600 MHz DDR3
NVIDIA GeForce GTX 675MX 1024 MB
OS Yosemite
Footage is 1920x1080 .MOV with H.264 Codec, Linear PCM
Footage is on an external HD
Project file is on main HD
Writing exported file to external HD
I've followed several troubleshooting tips including:
Uninstall and re-install CC 2014
Clean adobe media files
Check permissions on all folders
Switch Open CL to Software Only
Unchecked "Display out of sync indicators for unlinked clips"
Disabled "Show Duplicate Frame Markers"
Disabled "Show FX Badges"
I've also tried changing the location of where the final file is written to.
I've also tried this on my MBP with 2.3 GHz Intel Core i7, 8 GB RAM and AMD 6750M
Same results.
Any ideas? Am I missing something obvious here?
Thank you

Hi Matt,
Try this: close After Effects when rendering in Premiere Pro.
Thanks,
Kevin

Export AD group members to csv powershell with full details

Hi,
please help me...
How to Export AD group members to csv powershell with full details
fasil cv

Yep, that's true. Even if we try:
$GroupName = "group1"
Get-ADGroupMember -Identity $GroupName | where { $_.objectClass -eq "user" } | % {
Get-ADUser -Identity $_.distinguishedName -Properties * | select * |
Export-Csv -Path "$GroupName.csv" -NoTypeInformation -Append -Force
By scoping the Get-ADGroupMember to user objects, we may still have mismatched columns since some users may have properties that others do not; like 'isCriticalSystemObject'
I suppose one solution is to enumerate the properties before the Export, and add the consistent ones to a custom PSObject, and export that to CSV. It would help if the task requirement specifies what user properties are needed instead of the blanket "full
details", or if we export to XML instead of CSV.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Filtering the object type to just user objects is already implicit in Get-ADUser. If you really want information on all the members you'll need to run Get-ADUser on the user objects, and Get-ADGroup on the group objects.
Edit: There might also be computer account objects in there, too.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Csv-export with dynamic filename ?

Similar Messages

Maybe you are looking for