CSV File mapping deployment gets failed

Hi All,
I have one CSV file. I want to pull it into OWB 11.1.0.7 and load into Target Table.
I followed the following steps, but facing issues at the time of deploying mapping
VLD-1141: Internal errror during mapping generation+
I created OTHER_MODULE In Files and imported CSV file from D drive. After that i Created Target table and mapped it.
Mapping Validation is getting Sucessfull. While deploying the mapping facing facing above error...
I tried 3 times by recreating mapping, but facing same error.
How can we resolve this?
Regards,
Ava
Edited by: Ava on Dec 4, 2010 1:11 AM

Did you set the the database parameter "utl_file_dir" ?
More see this issue on My Oracle Support:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=949157.1
Cheers
Nico

Similar Messages

CSV File Doesn't Get Included In The Package

Hello friends,
We have problem with packaging the indesign document.
we are opening have data merge CSV files which show in the links pallet.
when we run the package command the .csv file doesn’t get included in the package
so if there are any extra settings that copies .csv files in the current package please help me.
Regard
Tahir

Hi
And how about this technet article
http://technet.microsoft.com/en-us/library/ff980461(v=exchg.141).aspx
To avoid this error in the future, follow one or more of these steps:
Do not manually modify message tracking log files. By default, these files are located in the following directory: C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\MessageTracking.
Make sure that your file-based antivirus software is configured to exclude file directories that contain message tracking log files. For more information about configuring your file-based antivirus software on an Exchange server, see
File-Level Antivirus Scanning on Exchange 2010.
Review the System log for disk-drive-related events. Use the information in those events to determine whether the disk that stored the log files has any hardware failures. You may have to use
CHKDSK tool to check a disk and display a status report. For more information about
CHKDSK, type CHKDSK /? at a command prompt.
Cheers
Zi Feng
TechNet Community Support

Reading csv file how to get the Column name

Hi,
I am trying to read a csv file and then save the data to Oracle.
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection c = DriverManager.getConnection("jdbc:odbc:;Driver={Microsoft Text Driver (*.txt; *.csv)};Dbq=.;Extensions=csv,txn");
Statement stmt = c.createStatement();
ResultSet rs = stmt.executeQuery("select * from filename.csv");
while(rs.next())
System.out.println(rs.getString("Num"));
My csv file looks like this:
"CHAM-23","COMPANY NAME","Test","12",20031213,15,16
Number,Environ,Envel,Date,Time
"1","2",3,"4",5
"6","7",8,"9",9
Now is there anyway using the above code I start processing the file from the second row that holds the names of the columns and skip the first row. And also can I get the name of the column using ResultSet something like:
if columnName.equals("Number")
Because I may have a csv file that could have more columns:
"CHAM-24","COMPANY NAME","Test","12",20031213,16,76
Number,Environ,Envel,Date,Time,Total,Count
"1","2","3","4","5",3,9
"6","7","8","9",9",,2
So I want to get the column name and then based on that column I do some other processing.
Once I read the value of each row I want to save the data to an Oracle Table. How do I connect to Oracle from my Application. As the database is on the server. Any help is really appreciated. Thanks

The only thing I could think of (and this is a cluj) would be to attempt to parse the first element of each row as a number. If it fails, you do not have a column name row. You are counting on the fact that you will never have a column name that is a number in the first position.
However, I agree that not always placing the headers in the same location is asking for trouble. If you have control over the file, format it how you want. If someone else has control over the file, find out why they are doing it that way. Maybe there is a "magic" number in the first row telling you where to jump.
Also, I would not use ODBC to simply parse a CSV file. If the file is formatted identically to Microsoft's format (headers in first row, all subsequent rows have same number of columns), then it's fine to take a shortcut and not write your own parser. But if the file is not adhering to that format, don't both using the M$ ODBC driver.
- Saish
"My karma ran over your dogma." - Anon

Deployment getting failed in OC4J Instances

I am trying to deploy my application in the OC4J instance(Oracle Enterpise Manager 10g) .But it is getting failed every time. Following is the Error stack from log file:
oracle.oc4j.admin.internal.DeployerException: java.lang.InstantiationException: Error compiling :D:\product\10.1.3\OracleAS_1\j2ee\home\applications\DDRWSAppV1.0-DDRWSV1.0-WS\WebServices: Error instantiating compiler: webservice artifact generation failed :java.lang.InstantiationException : service endpoint implementation class: 'ddr.ddrws.DDRGetRetailInvItemDayWSUser' not found
08/02/11 23:07:11      at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:214)
08/02/11 23:07:11      at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:96)
08/02/11 23:07:11      at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:541)
08/02/11 23:07:11      at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:197)
08/02/11 23:07:11      at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
08/02/11 23:07:11      at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
08/02/11 23:07:11      at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
08/02/11 23:07:11      at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
08/02/11 23:07:11      at java.lang.Thread.run(Thread.java:595)
08/02/11 23:07:11 Caused by: java.lang.InstantiationException: Error compiling :D:\product\10.1.3\OracleAS_1\j2ee\home\applications\DDRWSAppV1.0-DDRWSV1.0-WS\WebServices: Error instantiating compiler: webservice artifact generation failed :java.lang.InstantiationException : service endpoint implementation class: 'ddr.ddrws.DDRGetRetailInvItemDayWSUser' not found
08/02/11 23:07:11      at com.evermind.server.http.WrapperClassGenerator.generateWebServiceArts(WrapperClassGenerator.java:98)
08/02/11 23:07:11      at com.evermind.server.http.HttpApplication.generateWebServiceArtifacts(HttpApplication.java:8403)
08/02/11 23:07:11      at com.evermind.server.http.HttpApplication.populateLoaderWithWebServicesDeploymentCache(HttpApplication.java:5465)
08/02/11 23:07:11      at com.evermind.server.http.HttpApplication.populateLoader(HttpApplication.java:5394)
08/02/11 23:07:11      at com.evermind.server.http.HttpApplication.initClassLoader(HttpApplication.java:5333)
08/02/11 23:07:11      at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:645)
08/02/11 23:07:11      at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:428)
08/02/11 23:07:11      at com.evermind.server.Application.getHttpApplication(Application.java:512)
08/02/11 23:07:11      at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1975)
08/02/11 23:07:11      at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1894)
08/02/11 23:07:11      at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1591)
08/02/11 23:07:11      at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:206)
08/02/11 23:07:11      ... 8 more
08/02/11 23:07:11 WARNING: DeployerRunnable.run java.lang.InstantiationException: Error compiling :D:\product\10.1.3\OracleAS_1\j2ee\home\applications\DDRWSAppV1.0-DDRWSV1.0-WS\WebServices: Error instantiating compiler: webservice artifact generation failed :java.lang.InstantiationException : service endpoint implementation class: 'ddr.ddrws.DDRGetRetailInvItemDayWSUser' not foundoracle.oc4j.admin.internal.DeployerException: java.lang.InstantiationException: Error compiling :D:\product\10.1.3\OracleAS_1\j2ee\home\applications\DDRWSAppV1.0-DDRWSV1.0-WS\WebServices: Error instantiating compiler: webservice artifact generation failed :java.lang.InstantiationException : service endpoint implementation class: 'ddr.ddrws.DDRGetRetailInvItemDayWSUser' not found
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:126)
     at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
     at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.InstantiationException: Error compiling :D:\product\10.1.3\OracleAS_1\j2ee\home\applications\DDRWSAppV1.0-DDRWSV1.0-WS\WebServices: Error instantiating compiler: webservice artifact generation failed :java.lang.InstantiationException : service endpoint implementation class: 'ddr.ddrws.DDRGetRetailInvItemDayWSUser' not found
     at com.evermind.server.http.WrapperClassGenerator.generateWebServiceArts(WrapperClassGenerator.java:98)
     at com.evermind.server.http.HttpApplication.generateWebServiceArtifacts(HttpApplication.java:8403)
     at com.evermind.server.http.HttpApplication.populateLoaderWithWebServicesDeploymentCache(HttpApplication.java:5465)
     at com.evermind.server.http.HttpApplication.populateLoader(HttpApplication.java:5394)
     at com.evermind.server.http.HttpApplication.initClassLoader(HttpApplication.java:5333)
     at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:645)
     at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:428)
     at com.evermind.server.Application.getHttpApplication(Application.java:512)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1975)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1894)
     at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1591)
     at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:206)
     at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:96)
     at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:541)
     at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:197)
     at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
     ... 4 more
Please help me in solving the above problem.
Thanks in Advance
Vikram

A strange find that I came up with is, I have sixteen web services, when I try to deploy them,through JDeveloper 10.1.3.2 to OC4J instance. Deployment is getting failed. But when I am deploying it with 15 web services only, deployment is sucessful.
Please help its urgent
-Vikram
Message was edited by:
KoVik

Importing CSV file with Data Merge Fails

Specs
See pasted text from CSV at http://pastebin.com/mymhugpN
I am using InDesign CS6 (8.0.1)
I created the CSV by downloading it from a Google Spreadsheet as a CSV. I confirm with the Terminal that the character encoding is utf-8 usnig the file command.
Problem detailed
I am trying to import a CSV file (utf-8) with Data Merge via the Select Data Source... command with Show Import Options checked. When viewing the Data Source Import Options dialog, I set the following options—Delimiter:Comma, Encoding:Unicode, Platform:Macintosh. I leave Preserve Spaces in Data Source unchecked. It fails to import any variables and produces no error message. I have tried other CSV files as well (created TextEdit, Espresso, etc.) and it seems that InDesign will not import any files if Unicode is specified as the encoding, no matter which other options are specified.
Can anyone else confirm this?
Importing as ACSII works, but obviously does not display my content correctly.

Mike is having some trouble posting in this thread (and I am too), but he sent me a PM with what he wanted to say:
OK. I think I might have a positive answer for you.
I was getting lost in the upper ASCII characters you showed. In your test file I never could see any--a case of not seeing the trees for the forest.
Your quote marks are getting dropped in your test file. Now, this may or may not affect other factors but it does in some further testing. I believe ID has an issue with dropping quote marks even in a plain ASCII file if the marks are at the beginning of a sentence and the file is tab delimited. Call it a bug.
Because of all the commas and quote marks in your simple file, I think you should be exporting from Google Docs' spreadsheet as a tab-delimited file. This exported file has to be opened in a text editor capable of saving it out as a UTF-16 BE (Big Endian) type of file.
Also, I think you are going to have to use proper quote marks throughout, or change them in the exported tab-delimited file. Best to have a correct source, though.
Here is your sample ZIPped up. I think it works properly. But then again, I think I might be bleary-eyed by now.
http://www.wenzloffandsons.com/temp/merge_psalms_utf-16.zip
Take care, Mike

WebLogic Deployment getting Failed

Hi All,
Could you please give us few minutes to solve the issue in deploying Oracle Primavera Contract Management, which is getting failed everytime. I am following all the steps mentioned in the PDF and everything seems fine until I start the deployment service through consol.
Below is the error for your reference:
[HTTP:101216]Servlet: "StartupServlet" failed to preload on startup in Web application: "exponline". java.lang.NumberFormatException: null at java.lang.Integer.parseInt(Integer.java:417) at java.lang.Byte.parseByte(Byte.java:151) at java.lang.Byte.parseByte(Byte.java:108) at com.primavera.exponline.common.base.CommonUtilities.init(Unknown Source) at com.primavera.exponline.servlet.StartupServlet.init(Unknown Source) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985) at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959) at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878) at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154) at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508) at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201) at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249) at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119) at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28) at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52) at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205) at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58) at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161) at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116) at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:140) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844) at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253) at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176
(I got this error while clicking on the Failed status of the deployment.)
Versions:
WebLogic 11g (10.3.4) (32-Bit)
jrockit-jdk1.6.0_20-R28.1.0-4.0.1
jrockit-jre1.6.0_20-R28.1.0
Oracle Database 11g

Hi,
This patch will help you to resolve this problem 10051932
Regards,
Kal

While uploading a CSV file i am getting error

Hi All,
I am trying to upload a huge CSV file and now it is giving below error:
ORA-01653: unable to extend table ADT.SCG_RECIEVABLES2 by 128 in tablespace APEX_1711125608495793205.
Any expert,please guide what type of error is it?and what i need to do to solve it.
workspace name: ADT
target table is SCG_RECIEVABLES2.
Shyam

Hi,
Table space is full. Contact your DBA or extend tablespace.
First hit from Googling by that ORA error
http://www.dbmotive.com/oracle_error_codes.php?errcode=01653
BR,
Jari

.csv file should not get insert sql query with report

Hi Guys,
the below sqlplus code giving both sql query and records report in csv format file. I want only records csv file report.
SET LINESIZE 1000 TRIMSPOOL ON PAGESIZE 0 FEEDBACK OFF
SPOOL c:\oracle\extract\emp.csv
SELECT empno || ',' || ename || ',' || job || ',' || mgr || ',' || TO_CHAR(hiredate,'DD-MON-YYYY') AS hiredate || ',' || sal || ',' || comm || ',' || deptno
FROM   emp ORDER BY ename;
SPOOL OFF
SET PAGESIZE 14
can any one suggest me on this.
Thanks in advance!
Regards,
KLR

You will have to use UNION ALL:
SQL> SET LINESIZE 1000 TRIMSPOOL ON PAGESIZE 0 FEEDBACK OFF
SQL> WITH t AS (
2              SELECT 'empno,ename,job,mgr,hiredate,sal,comm,deptno' str,
3                      null ename
4                FROM dual
5             UNION ALL
6               SELECT empno || ',' || ename || ',' || job || ',' || mgr || ',' || TO_CHAR(hiredate,'DD-MON-YYYY') || ',' || sal || ',' || comm || ',' || deptno str,
7                       ename
8                 FROM emp
9            )
10 SELECT str
11    FROM t
12    ORDER BY ename NULLS FIRST;
empno,ename,job,mgr,hiredate,sal,comm,deptno
7876,ADAMS,CLERK,7788,23-MAY-1987,1100,,20
7499,ALLEN,SALESMAN,7698,20-FEB-1981,1600,300,30
7698,BLAKE,MANAGER,7839,01-MAY-1981,2850,,30
7782,CLARK,MANAGER,7839,09-JUN-1981,2450,,10
7902,FORD,ANALYST,7566,03-DEC-1981,3000,,20
7900,JAMES,CLERK,7698,03-DEC-1981,950,,30
7566,JONES,MANAGER,7839,02-APR-1981,2975,,20
7839,KING,PRESIDENT,,17-NOV-1981,5000,,10
7654,MARTIN,SALESMAN,7698,28-SEP-1981,1250,1400,30
7934,MILLER,CLERK,7782,23-JAN-1982,1300,,10
7788,SCOTT,ANALYST,7566,19-APR-1987,3000,,20
7369,SMITH,CLERK,7902,17-DEC-1980,800,,20
7844,TURNER,SALESMAN,7698,08-SEP-1981,1500,0,30
7521,WARD,SALESMAN,7698,22-FEB-1981,1250,500,30
SQL>
SY.

How to avoid spaces in csv file at the time of spooling

Hi all,
I am spooling 30 query results into one CSV file ,I am getting two empty rows for each query.
Can any one suggest me how to avoid these spaces.
Thanks & Regards,
P Prakash
this is the script i am using to generate csv file .
SET linesize 12000
SET pagesize 10000
SET pause off
SET termout off
SET feed off
SET head off
SPOOL c:\tes111.csv replace
SELECT 'ISA01,ISA02,ISA03,ISA04,ISA05,ISA06,ISA07,ISA08,ISA09,ISA11,ISA12,ISA13,ISA14,ISA15,ISA16,GS01,GS02,GS03,GS04,GS05,GS06,GS07,GS08,ST01,ST02,ST03,BHT01,BHT02,BHT03,BHT04,BHT06,trnsctn_segment_count,included_trnsctn_sets_count,included_fnctnl_groups_count,input_acknwldgmnt_sid'
FROM DUAL;
SELECT ptr.athrztn_infrmtn_qlfr
|| ','
|| ptr.athrztn_infrmtn
|| ','
|| ptr.scrty_infrmtn_qlfr
|| ','
|| ptr.scrty_infrmtn
|| ','
|| ptr.intrchng_sndr_idntfr_qlfr
|| ','
|| ptr.intrchng_sndr_idntfr
|| ','
|| ptr.intrchng_rcvr_idntfr_qlfr
|| ','
|| ptr.intrchng_rcvr_idntfr
|| ','
|| ptr.intrchng_date
|| ','
|| ptr.intrchng_cntrl_stndrds_idntfr
|| ','
|| ptr.intrchng_cntrl_vrsn_nmbr
|| ','
|| ptr.intrchng_cntrl_nmbr
|| ','
|| ptr.acknwldgmnt_rqstd_indctr
|| ','
|| ptr.usg_indctr
|| ','
|| ptr.cmpnt_elmnt_sprtr
|| ','
|| ptr.fnctnl_idntfr_code
|| ','
|| ptr.aplctn_sndr_code
|| ','
|| ptr.applctn_rcvr_code
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.grp_cntrl_nmbr
|| ','
|| ptr.rspnsbl_agncy_code
|| ','
|| ptr.vrsn_rls_indstry_idntfr_code
|| ','
|| ptr.trnsctn_set_idntfr_code
|| ','
|| ptr.trnsctn_set_cntrl_nmbr
|| ','
|| ptr.implementation_guide_vrsn_name
|| ','
|| ptr.hierarchical_structure_code
|| ','
|| ptr.trnsctn_set_purpose_lkpcd
|| ','
|| ptr.sbmtr_trnsctn_idntfr
|| ','
|| ptr.trnsctn_set_creation_date
|| ','
|| ptr.trnsctn_type_code
|| ','
|| ptr.trnsctn_segment_count
|| ','
|| ptr.included_trnsctn_sets_count
|| ','
|| ptr.included_fnctnl_groups_count
|| ','
|| ia.input_acknwldgmnt_sid
|| ','
FROM pa_transaction_request ptr, input_acknwldgmnt ia, input_batch_file ibf
WHERE ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'pa_rqst_sid,NM01,NM02,NM108,NM109'
FROM DUAL;
SELECT pr.pa_rqst_sid
|| ','
|| pr.entity_idntfr_lkpcd
|| ','
|| pr.entity_type_qlfr
|| ','
|| pr.payer_idntfctn_code_qlfr
|| ','
|| pr.payer_idntfctn_code
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE pr.pa_rqst_sid = prs.pa_rqst_sid
AND prs.stnl_target_table_cid = 100
AND prs.target_table_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'NM101 ,NM103,NM104,NM105,NM108,NM109,PER02,PER04,PER05,PER06,PER07 ,PER08'
FROM DUAL;
SELECT pr.pa_rqst_sid
|| ','
|| prpl.pa_rqst_x_prvdr_lctn_sid
|| ','
|| prpl.rqstr_entity_idntfr_lkpcd
|| ','
|| prpl.last_name
|| ','
|| prpl.first_name
|| ','
|| prpl.middle_name
|| ','
|| prpl.idntfr_type_cid
|| ','
|| prpl.prvdr_lctn_iid
|| ','
|| prpl.rqstr_contact_name
|| ','
|| prpl.cmnctn_nmbr_1
|| ','
|| prpl.cmnctn_nmbr_2
|| ','
|| prpl.cmnctn_nmbr_type_lkpcd_1
|| ','
|| prpl.cmnctn_nmbr_type_lkpcd_2
|| ','
|| prpl.cmnctn_nmbr_type_lkpcd_3
FROM pa_request_x_provider_location prpl,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prpl.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat'
AND prpl.pa_prvdr_type_lkpcd = 'RR';
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request_x_provider_location prpl,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE prpl.pa_rqst_sid = prs.pa_rqst_sid
AND prs.stnl_target_table_cid = 102
AND prs.target_table_sid = prpl.pa_rqst_x_prvdr_lctn_sid
AND prpl.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat'
AND prpl.pa_prvdr_type_lkpcd = 'RR';
-- 4. Subscriber
NM103 Name Last or Organization Name
NM104 Name First
NM108 Identification Code Qualifier
NM109 Identification Code
DMG02 Date Time Period birth date
DMG03 Gender Code
SELECT ' NM103,NM104,NM108,NM109,DMG02,DMG03'
FROM DUAL;
SELECT prxm.last_name
|| ','
|| prxm.first_name
|| ','
|| prxm.idntfr_type_cid
|| ','
|| prxm.mbr_idntfr
|| ','
|| prxm.birth_date
|| ','
|| prxm.gender_lkpcd
|| ','
FROM pa_request_x_member prxm,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prxm.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 5. Subscriber Situational Info
NM102 Entity Type Qualifier
NM105 Name Middle
NM107 Name Suffix
REF01 Reference Identification Qualifier
REF02 Reference Identification
N301 Address Information
N302 Address Information
N401 City Name
N402 State or Province Code
N403 Postal Code
N407 Country Subdivision Code
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request_x_member prxm,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE prxm.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND prs.stnl_target_table_cid = 101
AND prs.target_table_sid = prxm.pa_rqst_x_mbr_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 6. Patient Event Level
TRN02 Reference Identification
TRN03 Originating Company Identifier
TRN04 Reference Identification
UM01 Request Category Code
UM02 Certification Type Code
UM03 Service Type Code
UM04-1 Facility Code Value
UM04-2 Facility Code Qualifier
UM06 Level of Service Code
UM07 Current Health Condition Code
UM08 Prognosis Code
UM09 Release of Information Code
UM10 Delay Reason Code
SELECT 'TRN02,TRN03,TRN04,UMO1,UMO2,UM04_1,UM04_2,UM06,UM07,UM08,UM09,UM10,'
FROM DUAL;
SELECT prd.patient_event_tracking_number
|| ','
|| prd.orginating_company_identifier
|| ','
|| prd.trace_assigning_entity_idntfr
|| ','
|| prs.rqst_ctgry_lkpcd
|| ','
|| prs.rqst_crtfctn_type_lkpcd
|| ','
|| prs.x12_pa_srvc_type_code
|| ','
|| prs.facility_type_code
|| ','
|| prs.unfrm_blng_facility_type_code
|| ','
|| prs.srvc_rqd_lkpcd
|| ','
|| prs.current_health_cndtn_lkpcd
|| ','
|| prs.prognosis_lkpcd
|| ','
|| prs.rls_of_info_lkpcd
|| ','
|| prs.delay_reason_lkpcd
|| ','
FROM pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_detail prd
WHERE prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND pr.pa_rqst_sid = prd.pa_rqst_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
--Patient Event Level situational information
SELECT 'meta_data_cid,data_value,iteration_number,Created_by,modified_by'
FROM DUAL;
SELECT prs.meta_data_cid
|| ','
|| prs.data_value
|| ','
|| prs.iteration_number
|| ','
|| prs.created_by
|| ','
|| prs.modified_by
|| ','
FROM pa_request_service prsv,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_situational prs
WHERE prsv.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND prs.stnl_target_table_cid = 103
AND prs.target_table_sid = prsv.pa_rqst_srvc_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
---Diagnosis
HI01 Health Care Code Information
HI01-1 Code List Qualifier Code
HI01-2 Industry Code
HI01-3 Date Time Period Format Qualifier
HI01-4 Date Time Period
SELECT 'HI01_1,HI01_2,HI01_3'
FROM DUAL;
SELECT prd.pa_diagnosis_type_lkpcd
|| ','
|| prd.diagnosis_iid
|| ','
|| prd.from_date
|| ','
FROM pa_request_x_diagnosis prd,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prd.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- Request detail
TRN02 Reference Identification
TRN03 Originating Company Identifier
TRN04 Reference Identification
SELECT 'TRN02,TRN03,TRN04'
FROM DUAL;
SELECT prd.patient_event_tracking_number
|| ','
|| prd.orginating_company_identifier
|| ','
|| prd.trace_assigning_entity_idntfr
|| ','
FROM pa_request_detail prd,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prd.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- ambulance Transaportation
CR101 Unit or Basis for Measurement Code
CR102 Weight
CR103 Ambulance Transport Code
CR104 Ambulance Transport Reason Code
CR105 Unit or Basis for Measurement Code
CR106 Quantity
CR109 Description
CR110 Description
SELECT 'CR101,CR102,CR103,CR104,CR105,CR106,CR109,CR110'
FROM DUAL;
SELECT pat.weight_uom_code
|| ','
|| pat.patient_weight
|| ','
|| pat.amblnc_transport_type_lkpcd
|| ','
|| pat.amblnc_transport_rsn_lkpcd
|| ','
|| pat.distance_uom_code
|| ','
|| pat.trnsprtn_distance
|| ','
|| pat.round_trip_purpose_desc
|| ','
|| pat.stretcher_purpose_desc
|| ','
FROM pa_request_ambulance_transport pat,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE pat.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 2000F SV1
SV101-1 Product/Service ID Qualifier Change values
SV101-2 Product/Service ID Need to change label to Procedure Code.
SV101-3 Procedure Modifier No change required to PA screen
SV101-4 Procedure Modifier No change required to PA screen
SV101-5 Procedure Modifier No change required to PA screen
SV101-6 Procedure Modifier No change required to PA screen
SV101-7 Description No change required to PA screen. Will map to the Remarks field on the Screen
SV102 Monetary Amount
SV103 Unit or Basis for Measurement Code
SV104 Quantity
SV107 Composite Diagnosis Code Pointer
SV107-1 Diagnosis Code Pointer
SV107-2 Diagnosis Code Pointer
SV107-3 Diagnosis Code Pointer
SV107-4 Diagnosis Code Pointer
SV111 Yes/No Condition or Response Code
SV120 Level of Care Code
SELECT 'TRN_Reference_Identif,TRN_Originating_CMP_Identif,TRN_Reference_IdentiReference Identiff,Reference_Identif,Reference_Identification,Reference_Identif,Product/Service_ID_Qualifier,Product/Service_ID,Procedure_Modifier,Procedure_Modifier,Procedure_Modifier,Procedure_Modifier,Description'
FROM DUAL;
SELECT prp.srvc_trace_nmbr_1
|| ','
|| prp.trace_asgn_enty_adtnl_idntfr_1
|| ','
|| prp.trace_asgn_enty_adtnl_idntfr_1
|| ','
|| prp.trace_asgn_enty_adtnl_idntfr_2
|| ','
|| prp.prvs_rvw_athrztn_nmbr
|| ','
|| prp.prvs_administrative_rfrnc_nmbr
|| ','
|| prp.x12_code_list_qlfr_lkpcd
|| ','
|| prp.procedure_iid
|| ','
|| prp.mdfr_code
|| ','
|| prp.mdfr2_code
|| ','
|| prp.mdfr3_code
|| ','
|| prp.mdfr4_code
|| ','
|| prp.drug_desc
|| ','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HHIPAA.165760000.20110518I001.278_GC04-3.dat';
SV2 SV201 Product/Service ID
SV2 SV202 Composite Medical Procedure Identifier
SV2 SV202-1 Product/Service ID Qualifier
SV2 SV202-2 Product/Service ID
SV2 SV202-3 Procedure Modifier
SV2 202-4 Procedure Modifier
SV2 SV202-5 Procedure Modifier
SV2 SV202-6 Procedure Modifier
SV2 SV202-7 Description
SV2 SV202-8 Product/Service ID
SV2 SV203 Monetary Amount
SV2 SV204 Unit or Basis for Measurement Code
SV2 SV205 Quantity
SV2 SV206 Unit Rate
SV2 SV209 Nursing Home Residential Status Code
SELECT 'Product/Service ID,Product/Service ID Qual,Product/Service ID,Product Modifier,Product Modifier,Product Modifier,Product Modifier,Description,Unit Rate,'
FROM DUAL;
SELECT prp.revenue_iid ||','||
prp.x12_code_list_qlfr_lkpcd ||','||
prp.procedure_iid ||','||
prp.mdfr_code ||','||
prp.mdfr2_code ||','||
prp.mdfr3_code ||','||
prp.mdfr4_code ||','|| prp.drug_desc ||','||
prp.srvc_line_rate ||','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 2000F SV3
SV301 Composite Medical Procedure Identifier
SV301-1 Product/Service ID Qualifier
SV301-2 Product/Service ID
SV301-3 Procedure Modifier
SV301-4 Procedure Modifier
SV301-5 Procedure Modifier
SV301-6 Procedure Modifier
SV301-7 Description
SV301-8 Product/Service ID
SV302 Monetary Amount
SV304 Oral Cavity Designation
SV304-1 Oral Cavity Designation Code
SV304-2 Oral Cavity Designation Code
SV304-3 Oral Cavity Designation Code
SV304-4 Oral Cavity Designation Code
SV304-5 Oral Cavity Designation Code
SV305 Prosthesis, Crown or Inlay Code
SV306 Quantity
SV307 Description
select 'Product/Service ID Qual,Product/Service ID,Procedure Modifier,Procedure Modifier,Procedure Modifier,Procedure Modifier,Description,Oral Cavity Designation Code,Oral Cavity Designation Code,Oral Cavity Designation Code,Oral Cavity Designation Code,ProsthesisCrown Inlay Code,Description' from dual;
SELECT prp.x12_code_list_qlfr_lkpcd
|| ','
|| prp.procedure_iid
|| ','
|| prp.mdfr_code
|| ','
|| prp.mdfr2_code
|| ','
|| prp.mdfr3_code
|| ','
|| prp.mdfr4_code
|| ','
|| prp.drug_desc
|| ','
|| prp.oral_cavity_dsgntn2_cid
|| ','
|| prp.oral_cavity_dsgntn3_cid
|| ','
|| prp.oral_cavity_dsgntn4_cid
|| ','
|| prp.oral_cavity_dsgntn5_cid
|| ','
|| prp.prosthesis_crown_inlay_code
|| ','
|| prp.remark
|| ','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- 2000F TOO pending Prakash to Write
--Tooth Information
SELECT 'Industry Code,Tooth Surface,TOO03-1_Tooth Surface Code,TOO03-2_Tooth Surface Code,TOO03-3_Tooth Surface Code,TOO03-4_Tooth Surface Code,'
FROM DUAL;
SELECT prp.tooth_number_cid
|| ','
|| prp.tooth_surface_cid
|| ','
|| prp.tooth_surface2_cid
|| ','
|| prp.tooth_surface3_cid
|| ','
|| prp.tooth_surface4_cid
|| ','
|| prp.tooth_surface5_cid
|| ','
FROM pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
--tooth SItuational Information
select 'Monetary Amount,Quantity' from dual;
SELECT prpt.rqst_prcdr_amt||','|| prpt.rqst_prcdr_units||','
FROM pa_rqst_prcdr_transaction prpt,
pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prpt.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- pa_rqst_prcdr_x_prvdr_lctn
select 'pa_rqst_prcdr_sid,pa_rqst_x_prvdr_lctn_sid' from dual;
SELECT prppl.pa_rqst_prcdr_sid||','|| prppl.pa_rqst_x_prvdr_lctn_sid||','
FROM pa_rqst_prcdr_x_prvdr_lctn prppl,
pa_request_procedure prp,
pa_request_service prs,
pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf
WHERE prppl.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND prp.pa_rqst_srvc_sid = prs.pa_rqst_srvc_sid
AND prs.pa_rqst_sid = pr.pa_rqst_sid
AND pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
-- error Details
--Header level error details
SELECT 'pa_rqst_sid,pa_error_nmbr,pa_error_sid,reject_reason_lkpcd,follow_up_action_lkpcd,aaa_segment_loop_nmbr,run_nmbr,'
FROM DUAL;
SELECT prre.pa_rqst_sid
|| ','
|| pe.pa_error_nmbr
|| ','
|| pe.pa_error_sid
|| ','
|| ped.reject_reason_lkpcd
|| ','
|| ped.follow_up_action_lkpcd
|| ','
|| ped.aaa_segment_loop_nmbr
|| ','
|| prre.run_nmbr
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_run_error prre,
pa_error pe,
pa_error_detail ped
WHERE pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND pr.pa_rqst_sid = prre.pa_rqst_sid
AND prre.pa_error_sid = pe.pa_error_sid
AND pe.pa_error_sid = ped.pa_error_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
---Line Level Error Details
SELECT 'pa_rqst_sid,pa_error_nmbr,pa_error_sid,reject_reason_lkpcd,follow_up_action_lkpcd,aaa_segment_loop_nmbr'
FROM DUAL;
SELECT pr.pa_rqst_sid
|| ','
|| pe.pa_error_nmbr
|| ','
|| pe.pa_error_sid
|| ','
|| ped.reject_reason_lkpcd
|| ','
|| ped.follow_up_action_lkpcd
|| ','
|| ped.aaa_segment_loop_nmbr
|| ','
FROM pa_request pr,
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request_service prs,
pa_request_procedure prp,
pa_request_procedure_run_error prpre,
pa_error pe,
pa_error_detail ped
WHERE pr.pa_trnsctn_rqst_sid = ptr.pa_trnsctn_rqst_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND pr.pa_rqst_sid = prs.pa_rqst_sid
AND prs.pa_rqst_srvc_sid = prp.pa_rqst_srvc_sid
AND prp.pa_rqst_prcdr_sid = prpre.pa_rqst_prcdr_sid
AND prpre.pa_error_sid = pe.pa_error_sid
AND pe.pa_error_sid = ped.pa_error_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SPOOL off
SET head on
SET feed on
SET termout on
SET pause on

833560 wrote:
Hi all,
I am spooling 30 query results into one CSV file ,I am getting two empty rows for each query.
Can any one suggest me how to avoid these spaces.
Thanks & Regards,
P Prakash
this is the script i am using to generate csv file .
SET linesize 12000
SET pagesize 10000
SET pause off
SET termout off
SET feed off
SET head off
SPOOL c:\tes111.csv replace
SELECT 'ISA01,ISA02,ISA03,ISA04,ISA05,ISA06,ISA07,ISA08,ISA09,ISA11,ISA12,ISA13,ISA14,ISA15,ISA16,GS01,GS02,GS03,GS04,GS05,GS06,GS07,GS08,ST01,ST02,ST03,BHT01,BHT02,BHT03,BHT04,BHT06,trnsctn_segment_count,included_trnsctn_sets_count,included_fnctnl_groups_count,input_acknwldgmnt_sid'
FROM DUAL;
SELECT ptr.athrztn_infrmtn_qlfr
|| ','
|| ptr.athrztn_infrmtn
|| ','
|| ptr.scrty_infrmtn_qlfr
|| ','
|| ptr.scrty_infrmtn
|| ','
|| ptr.intrchng_sndr_idntfr_qlfr
|| ','
|| ptr.intrchng_sndr_idntfr
|| ','
|| ptr.intrchng_rcvr_idntfr_qlfr
|| ','
|| ptr.intrchng_rcvr_idntfr
|| ','
|| ptr.intrchng_date
|| ','
|| ptr.intrchng_cntrl_stndrds_idntfr
|| ','
|| ptr.intrchng_cntrl_vrsn_nmbr
|| ','
|| ptr.intrchng_cntrl_nmbr
|| ','
|| ptr.acknwldgmnt_rqstd_indctr
|| ','
|| ptr.usg_indctr
|| ','
|| ptr.cmpnt_elmnt_sprtr
|| ','
|| ptr.fnctnl_idntfr_code
|| ','
|| ptr.aplctn_sndr_code
|| ','
|| ptr.applctn_rcvr_code
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.fnctnl_grp_crtn_date
|| ','
|| ptr.grp_cntrl_nmbr
|| ','
|| ptr.rspnsbl_agncy_code
|| ','
|| ptr.vrsn_rls_indstry_idntfr_code
|| ','
|| ptr.trnsctn_set_idntfr_code
|| ','
|| ptr.trnsctn_set_cntrl_nmbr
|| ','
|| ptr.implementation_guide_vrsn_name
|| ','
|| ptr.hierarchical_structure_code
|| ','
|| ptr.trnsctn_set_purpose_lkpcd
|| ','
|| ptr.sbmtr_trnsctn_idntfr
|| ','
|| ptr.trnsctn_set_creation_date
|| ','
|| ptr.trnsctn_type_code
|| ','
|| ptr.trnsctn_segment_count
|| ','
|| ptr.included_trnsctn_sets_count
|| ','
|| ptr.included_fnctnl_groups_count
|| ','
|| ia.input_acknwldgmnt_sid
|| ','
FROM pa_transaction_request ptr, input_acknwldgmnt ia, input_batch_file ibf
WHERE ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ibf.original_file_name =
'HIPAA.165760000.20110518I001.278_GC04-3.dat';
SELECT 'pa_rqst_sid,NM01,NM02,NM108,NM109'
FROM DUAL;
Hi ,
Save your query in a file and execute that file
SQL>@a.aqlHope this helps
Regards,
Achyut

CSV file downloading replaces the parent window

Hi,
I'm trying to download a .csv file from my web application using Content-Disposition
here is my code
response.setContentType("application/octet-stream");
filename = filename.concat(downloadType);
response.setHeader("Content-Disposition","attachment; filename="+filename+";");
//response.setHeader("Content-Disposition","application/octet-stream; filename="+filename+";");
String source = (String)ivHttpRequest.getAttribute("downloadFile");
if(downloadType.equals(".txt")) {
source = Utils.decodeHtmlEntities(source);
byte [] byteArray;
if(source == null)
// use ivRequest instead
String source2 = (String)ivRequest.getAttribute("downloadFile");
if(downloadType.equals(".txt")){
source2 = Utils.decodeHtmlEntities(source2);
byteArray = source2.getBytes();
else
byteArray = source.getBytes();
ServletOutputStream out = response.getOutputStream();
out.write(byteArray);
out.close();
I'm able to download the file in all the browsers, But while using IPAD the content of the file replaces the existing window (Parent Window) without asking for Save or Open option. So i'm unable to get the parent window again.
Please let me know is there any special content type or anythinmg else i have to change.. So that i could be able to open the csv file in a new tab without replacing the parent window.The problem i faced only with IPAD

Hi,
For pdf file if we choose adhoc or by giving the proper name, we can able to get the options like OPEN or SAVE. This will work fine for pdf.
But here im trying with csv file /html file, so the file is replacing the existing screen itself when i click the csv link. In my web application, i cannot get the parent window by using back button once i get the csv file instead page gets expired.
So my best suggestion is should we able to open the csv file in new Tab of safari instead of replacing the parent window where im clicking to open the csv file.
Suggestions pls.

Problem in handling complex CSV file

Hi,
I am facing a strange problem in handling a complex CSV file.
The content of the file is as follows. It is getting executed through an XSD and the target is a table.
First time when the interface is executed ( for e.g session id - 19001) it is getting completed successfully.
Now when making changes in the CSV file suppose adding ( for e.g.-
DEPT,D05,Books,ABC Store
CUST,C01,Sayantan,[email protected]
CUST,C02,Shubham,[email protected])
or deleting ( for e.g.-
CUST,C02,Sarbajit,[email protected])
and running the interface I am not getting the added D05 in the target table nor my C02 data is getting removed i.e.- the updated data in CSV file is not getting fetched and I am getting the same records as i got when i ran interface of session id 19001.
I am not getting why it is happening??
The CSV file used in session id -19001 is:
DEPT,D01,Retail,World Mart
CUST,C01,Anindya,[email protected]
CUST,C02,Rashni,[email protected]
DEPT,D02,Food,Food Bazar
CUST,C01,Abhijit,[email protected]
CUST,C02,Anirban,[email protected]
CUST,C03,Sharmistha,[email protected]
DEPT,D03,Water,SW
CUST,C01,Nirmalya,[email protected]
DEPT,D04,Clothes,City style
CUST,C02,Sarbajit,[email protected]
CUST,C03,Abhishek,[email protected]

Here's what you can do to handle CSV files using HSQL.
Say the CSV file contains order data. Each order record contains data about a particular order like order number, product code, quantity, ordered by, date etc. Now lets take a hypothetical requirement which says, the user needs to know how many orders were ordered per product.
Option 1] At the basic level, read the order file, parse each line and write the logic to get count of orders per product.
Option 2] Load this CSV file into a database like MySQL and write database queries to get the orders per product.
So where does this leave us? Have we run out of options? I am sure we would have tried & used the above two options . But I wanted a different approach. Following questions were lingering in my mind:
1] Why can’t I write SQL queries against the CSV file itself. After all it’s like any RDBMS table.
2] Why should I load the CSV file into some database before I query it?
3] Why can’t I create a database table & attach the CSV file to it?
Continue Reading Here: Handling CSV Files

Unable to save the webi report results in CSV file in XIR2 environment

Hi Team,
We have one WebI report in BOXIR2 version and it fetching nearly 76+ records in the report. The report is running fine without any issues and when i am trying to export the results into CSV file we are getting the error msg (Maximum Binary file size exceeded WIS30271). The file size is more than 80MB and hence it throwing this error. I have checked the Maximun Binary File size that is set in CMC and it is set to 80MB.
When i ran the same query in the database and exporting the results in to csv file the file size is under 80MB. I would like to know the reason why there is a difference in the file size when running the query manually in database and exporting in to csv file and to export the results set in to csv through business objects.

Below are the possible causes to get this error message:
1] When a large Web Intelligence report is exported to CSV format, we get error: Max Binary file size limit exceeded. The document is too large to be processed by the server. Error WIS 30271
Cause
This error message appears because BusinessObjects Enterprise allows documents to be saved with the limit specified for Web Intelligence Report server settings in the Central Management Console(CMC).
To resolve the error follow the below steps:
- Login to Central Management Console (CMC) using BusinessObjects Enterprise "Administrator".
- Navigate to "Home >> Servers".
- Click on "Web Intelligence Report Server" to open its properties.
- Increase the "Maximum Binary File Size"(Default value=50 MBytes; Maximum value = 65535 MBytes).
- Click on "Apply" and then on "Update".
- Allow the Web Intelligence server to restart.
2] In Web Intelligence, when attempting to save a report to Excel or Portable Document Format (PDF), the following error message appears:
"Max binary file size limit exceeded. The document is too large to be processed by the server. Contact your database administrator. (Error: WIS 30271)".
Cause:
This error message appears because Business Objects Enterprise allows documents to be saved up to the limit set for Web Intelligence Report Server in the Central Management Console (CMC). The default file size limit is 50 megabytes for binary file types like PDF and Excel.
To resolve this error message, you will need to increase the Max Binary file size value.
1.      Open the CMC.
2.      Browse to Servers
3.      Click on your Web Intelligence Report Server.
4.      On the Properties page, increase the Maximum Binary File Size.
5.      Apply the setting and allow the Web Intelligence Report Server to restart.
Increasing these values too high could impact Web Intelligence performance when users attempt to save excessively large files.
Hope this helps.

Generating .csv file with the datas from the database

Hi Java experts,
Ihave a current assignment to generate a .CSV file using java getting values from database. The output CSV file may have more than one row and each row should have a end of line delimiter. Any help in giving a template for generating a CSV file accessing from database is greatly appreciated.

Ihave a current assignment to generate a .CSV file
using java getting values from database.well, I hope you learn something doing it yourself...
The output
CSV file may have more than one row and each row
should have a end of line delimiter. Any help in
giving a template for generating a CSV file accessing
from database is greatly appreciated.How about looking for a JDBC and a file/print stream tutorial?

OWB FLAT FILE MAPPING NOT ABLE TO DEPLOY

Hi,
I've recently started studying data warehousing and exploring the Datawarehouse builder version 3i.
I've created a simple mapping from a csv file to database table ie my source is a flat file and target is a database table. The mapping gets validated successfully and the ctl scrip also gets generated. But the 'Deploy' and "Run' buttons on the "Transformations" tab of the "Generation Results" window are displabled(greyed out) and hence I cannot deploy the generated script.
Please do suggest the cause and solution for the same.
Regards,
Barkha

Many Thanks to Winfred Deering from Oracle who replied:
"This is the expected behavior for flat file mappings. You can register the tcl script with Oracle Enterprise Manager and run it from there. Also you can save the control file and execute via sql loader. "
Thanks and Regards,
Barkha

Uploading & Processing of CSV file fails in clustered env.

          We have a csv file which is uploaded to the weblogic application server, written
          to a temporary directory and then manipulated before being written to the database.
          This process works correctly in a single server environment but fails in a clustered
          environment.
          The file gets uploaded to the server into the temporary directory without problem.
          The processing starts. When running in a cluster the csv file is replicated
          to a temporary directory on the secondary server as well as the primary.
          The manipulation process is running but never finishes and the browser times out
          with the following message:
          Message from the NSAPI plugin:
          No backend server available for connection: timed out after 30 seconds.
          Build date/time: Jun 3 2002 12:27:28
          The server which is loading the file and processing it writes this to the log:
          17-Jul-03 15:13:12 BST> <Warning> <HTTP> <WebAppServletContext(1883426,fulfilment,/fu
          lfilment) One of the getParameter family of methods called after reading from
          the Serv
          letInputStream, not merging post parameters>.


Anna Bancroft wrote:
          > We have a csv file which is uploaded to the weblogic application server, written
          > to a temporary directory and then manipulated before being written to the database.
          > This process works correctly in a single server environment but fails in a clustered
          > environment.
          >
          > The file gets uploaded to the server into the temporary directory without problem.
          > The processing starts. When running in a cluster the csv file is replicated
          > to a temporary directory on the secondary server as well as the primary.
          >
          > The manipulation process is running but never finishes and the browser times out
          > with the following message:
          > Message from the NSAPI plugin:
          > No backend server available for connection: timed out after 30 seconds.
          >
          >
          >
          > --------------------------------------------------------------------------------
          >
          > Build date/time: Jun 3 2002 12:27:28
          >
          > The server which is loading the file and processing it writes this to the log:
          > 17-Jul-03 15:13:12 BST> <Warning> <HTTP> <WebAppServletContext(1883426,fulfilment,/fu
          > lfilment) One of the getParameter family of methods called after reading from
          > the Serv
          > letInputStream, not merging post parameters>.
          >
          >
          It doesn't make sense? Who is replicating the file? How long does it
          take to process the file? Which plugin are you using as proxy to the
          cluster?
          -- Prasad

CSV File mapping deployment gets failed

Similar Messages

Maybe you are looking for