CT04 - Changing characteristic Value Check procedure
Hi,
I want to change the value check validation for a an existing material characteristic from from the allowed values list to a chaeck table. I intende on on using the 'Other Value Check' button in the Values tab of CT04, but unfortunately this button is greyed out.
I would like to know if it is possible to start using a check table for an existing material characteriestic, and if so how?
Thanks,
Roy
Hi Roy,
The only way I've managed to do this was to delete and re-create the characteristic. It gets complicated as SAP wants you to remove all entries for the characteristic before deleting it which means you need someone able to do the LSMWs to remove then re-load the data once you've re-created the characteristic.
Regards,
John
Similar Messages
-
I understand the values with release strategy do not get transported through transport request and we need to update them with T-code CL20N.
Does the same rule applies to CT04 - Change characteristic when we need to maintain new values ?It is always better to make the changes in Development client and ALE the characteristics and Class through BD91 and BD92, in this way you can make sure that there is no inconsistency in the values in different clients.
If the characteristics values are already assigned to some objects, you wont be able to delete or make changes to those values..you have to delete the assignments first and then change the values in CT04. -
Hi. i used Function module to change Characteristic values of a sales order
hi. i used Function module to change Characteristic values of a sales order..
but sales order's Characteristic values didn't change.
And the Function module doesn't occur any log message.
please tell me wrong code, and how to solve this problem.
if i have wrong method, what data can i pass to change the characteristic values
DATA: LT_E1CUVAL TYPE TABLE OF E1CUVAL.
DATA: WA_E1CUVAL TYPE E1CUVAL.
DATA: LS_CFG_HEAD LIKE CUXT_CUCFG_S,
LS_INSTANCES LIKE CUXT_CUINS_S,
LS_VALUES LIKE CUXT_CUVAL_S,
LS_E1CUCFG LIKE E1CUCFG,
LS_E1CUINS LIKE E1CUINS,
LS_E1CUVAL LIKE E1CUVAL,
LS_PROFILE LIKE E1CUCOM,
LS_VBAP LIKE VBAP,
L_CUOBJ LIKE INOB-CUOBJ,
L_ATINN LIKE CABN-ATINN.
DATA: LT_INSTANCES LIKE CUXT_CUINS_S OCCURS 0,
LT_PART_OF LIKE CUXT_CUPRT_S OCCURS 0,
LT_VALUES LIKE CUXT_CUVAL_S OCCURS 0,
LT_VAR_KEYS LIKE CUXT_CUVK_S OCCURS 0,
LT_KSML LIKE KSML OCCURS 0 WITH HEADER LINE,
BEGIN OF LT_CLINT OCCURS 0,
CLINT LIKE KSSK-CLINT,
END OF LT_CLINT.
DATA: LT_CUIB LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
DATA: E_ROOT_INSTANCE TYPE CUXT_INSTANCE_NO.
DATA: EV_ROOT_PERSIST_ID TYPE IBEXTINST_DATA-EXT_INST_ID.
DATA: EV_CFG_HAS_CHANGED TYPE XFELD.
DATA: EV_HANDLE_APPL_LOG TYPE BALLOGHNDL.
DATA: L_CUOBJ_NEW TYPE CUOBJ.
DATA: L_OWNER TYPE IBXX_BUSINESS_OBJECT.
REFRESH LT_E1CUVAL.
CLEAR LS_VBAP.
SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
FROM VBAP WHERE VBELN = I_VBELN
AND POSNR = I_POSNR.
IF SY-SUBRC <> 0.
RAISE INSTANCE_NOT_FOUND.
ENDIF.
REFRESH LT_CUIB. CLEAR LT_CUIB.
LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
APPEND LT_CUIB.
CALL FUNCTION 'CUCB_INITIALIZER'
EXPORTING
IT_INSTANCES = LT_CUIB[].
CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
EXPORTING
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
IMPORTING
E_CFG_HEAD = LS_CFG_HEAD
ES_PROFILE = LS_PROFILE
ET_RETURN = ET_RETURN
TABLES
E_TAB_INSTANCES = LT_INSTANCES
E_TAB_PART_OF = LT_PART_OF
E_TAB_VALUES = LT_VALUES
E_TAB_VAR_KEYS = LT_VAR_KEYS
EXCEPTIONS
INVALID_INSTANCE = 1
NO_ROOT_INSTANCE = 2
INSTANCE_IS_A_CLASSIFICATION = 3
INTERNAL_ERROR = 4
NO_PROFILE_FOUND = 5
INVALID_DATA = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE INSTANCE_NOT_FOUND.
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ELSE.
LOOP AT LT_VALUES INTO LS_VALUES.
IF LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
LS_VALUES-VALUE = '7100010'. "This is test data
MODIFY LT_VALUES FROM LS_VALUES.
ELSE.
DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
ENDIF.
CLEAR LS_VALUES.
ENDLOOP.
ENDIF.
영업정보 특성 변경
CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
EXPORTING
I_CFG_HEADER = LS_CFG_HEAD
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
I_PLANT =
I_STRUCTURE_EXPLOSION_DATE =
I_STRUCTURE_EXPLOSION_APPL_ID =
I_LOGSYS =
IS_PROFILE = LS_PROFILE
IV_ONLY_SINGLE_LEVEL =
IV_HANDLE_APPL_LOG =
IV_OBJECT_APPL_LOG = 'CIF'
IV_SUBOBJECT_APPL_LOG = 'T_CNFG'
IMPORTING
E_ROOT_INSTANCE = E_ROOT_INSTANCE
EV_ROOT_PERSIST_ID = EV_ROOT_PERSIST_ID
EV_CFG_HAS_CHANGED = EV_CFG_HAS_CHANGED
EV_HANDLE_APPL_LOG = EV_HANDLE_APPL_LOG
ET_RETURN = ET_RETURN
TABLES
I_TAB_INSTANCES = LT_INSTANCES
I_TAB_PART_OF = LT_PART_OF
I_TAB_VALUES = LT_VALUES
I_TAB_VAR_KEYS = LT_VAR_KEYS
I_TAB_BLOB =
EXCEPTIONS
NO_CONFIGURATION_DATA = 1
NO_ROOT_INSTANCE = 2
INVALID_INSTANCE = 3
INSTANCE_IS_A_CLASSIFICATION = 4
INTERNAL_ERROR = 5
NO_PROFILE_FOUND = 6
INVALID_DATA = 7
OTHERS = 8
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE NO_CONFIGURATION_DATA.
WHEN 3.
RAISE NO_ROOT_INSTANCE.
WHEN 3.
RAISE INVALID_INSTANCE .
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN 3.
RAISE INTERNAL_ERROR.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ENDIF.
COMMIT WORK.
save configuration with next commit
CLEAR: LS_INSTANCES.
READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
L_OWNER-OBJECT_KEY = LS_INSTANCES-OBJ_KEY.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
ROOT_INSTANCE = LS_VBAP-CUOBJ
ROOT_OBJECT = L_OWNER
IMPORTING
NEW_INSTANCE = L_CUOBJ_NEW
EXCEPTIONS
INVALID_INSTANCE = 1
INVALID_ROOT_INSTANCE = 2
NO_CHANGES = 3
OTHERS = 4.
IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
CLEAR LS_VBAP-CUOBJ.
RAISE INTERNAL_ERROR.
ELSEIF SY-SUBRC = 1.
LS_VBAP-CUOBJ = L_CUOBJ_NEW.
ENDIF.
What's wrong?
help me to solve this problem.
Thanks a lot.<b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
<b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
<b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
<b>SD_PARTNER_READ</b> all the partners information and addresses
<b>SD_DETERMINE_CONTRACT_TYPE</b>
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
<b>SD_SALES_DOCUMENT_COPY</b>
<b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod -
BI-IP change characteristic value in FOX
Hello Guys,
i want to change the characteristic value in FOX.
Therefore the FOX runs through all char combinations to identify the highest
number for the char test.
This step works fine, but i cant write the value for maxloop in the cube.
If i try, only the old row is deleted, but i dont get a new row with the calculated value for maxloop.
the code looks like this:
DATA LOOP TYPE test.
DATA MINLOOP TYPE test.
DATA MAXLOOP TYPE test.
MINLOOP = 00000.
MAXLOOP = 00000.
FOREACH LOOP.
MINLOOP = LOOP.
IF MINLOOP > MAXLOOP.
MAXLOOP = MINLOOP.
ENDIF.
ENDFOR.
MAXLOOP = MAXLOOP + 00001.
{Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
Any suggestions what is wrong here?
Regards
T. MeklerHi,
You have written
{Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
But as per the statement MAXLOOP = MAXLOOP + 00001 the MAXLOOP conatins a new figure. Obviously there will not be any record in the cube for this value of MAXLOOP.
You are assigning this to the record with MAXLOOP = 00200, so system is assigning zero to 0AMOUNT for the record that is having MAXLOOP=00200 value.
Make the below corrections and test again:
DATA NEWLOOP type test.
NEWLOOP = MAXLOOP + 00001.
{Amount, EUR, #, #, NEWLOOP, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, MAXLOOP, 00000000, #, 2007, #, #, #, #, #, #, #}.
Regards,
Deepti -
Change characteristic values in SO via BAPI_SALESORDER_CHANGEBOS
Hi Experts,
Now, I would like to update the characteristic values of configuration in sales order via BAPI : BAPI_SALESORDER_CHANGEBOS. But, I can't find right way to execute this BAPI. I tried so many times and no data changed. I wonder that i didn't specify the correct import parameters.
Is anyone can help me? Thanks for your kindly support in advance.
Best Regards,
RyanHi Ryan,
I had a similar kind of requirment, to change the characteristic values in a sales contract, where I used, BAPISDORDER_GETDETAILEDLIST to get the details of the agreement line iteam and after sorting the necessary vales then used BAPI: BAPI_CUSTOMERCONTRACT_CHANGE to change the customer agreement line item.
In your case as well you can use the BAPISDORDER_GETDETAILEDLIST to get the details, based on this you write logic to hold the necessary change value and finally, use BAPI: BAPI_SALESORDER_CHANGE to updated the changes in the sales order.
Hope this helps.
Regards
Raj -
Change Characteristic values in Material class Classification
Hi,
Is there any standard program to change Characteristic vaules in Material Classification?
Thanks,
ShivaThanks for your help.
Points will be awarded.
Shiva -
Lock characteristic value for configurable material in Sales Order
Is there a setting in SAP which can prevent user changing characteristic value for configurable material in Sales Order after production order created for this Sales Order? Currently, it can only works when first delivery create for this Sales Order.
Thanks a lot.Hi,,
in the characteristic goto additional data tab,
you have a field called not ready for input.
you select this when the value in this characteristic come by calculation based on the previous selection.
that field will be greyed out.
OR
u can even select the no display check box,
by selecting this u cant see the characteristic in the list,, it will give u a popup before leaving the screen.
for this the char has to be a required field.
OR
if any of this is not working then may be u can try out with authorization management.
thanks -
Characteristic values and CT04
Hi all,
I have a user that wants to store default values for certain fields in the characteristics of a class. For instance, I create a material...if the characteristic GR_PR_TIME is 5...then assign 5 to the GR PR Time field for the material. Problem is when the user goes to CT04 to change the characteristic value. As soon as the user deletes the old value they are prompted that the value is already associated with a material and as such should not be deleted. How do I work around that? I suggested multiple allowed characteristic values with one marked as default but my user doesn't like that suggestion. What am I missing here? Should this not be a class based solution?
Thanks,
MatCheck if you can use material and material groups or product and product Info objects in BW. If they suit, just assign the data source that you cerated in R/3 to these info sources and that is it.
Ravi Thothadri -
Assigning dependencies & procedures to characteristic value
Dear experts
Please how do i rightly assign a procedure created in a dependecy to a characteristic value.
I have created the procedure & dependency but this is not being calculated in the characteristic description1. IN CU01 createa global dependency
2. in ct04 in the charc value area assign the dependency there.
let me know feedback
reg
dsk -
BI-IP: Change of characteristic value in ABAP EXIT planning function
Hi
I have created a planning function of the type EXIT with reference data without blocks. In method IF_RSPLFA_SRVTYPE_IMP_EXEC_REF~EXECUTE I am going to implement my code.
Now, one of the purposes is to update the VALIDTO of an existing record. Is it possible to modify the characteristic values directly in C_TH_DATA (thus allowing me to just update the date directly on the record) or can I only append records?
Cheers!
/KarstenHi Larse,
Yes you can change directly your value in a record withou appending a new one,but still it will create 2 records in the delta buffer ready to be save to the cube.
Reagrds,
Eitan. -
How to change the characteristic value in a item of sales order by FM?
Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
RegradsHi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
IBXX.
data: l_CUOBJ type CUOBJ_VA,
l_ibase type IBCO2_IBASE_REC,
l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
w_CONFIGURATION type IBCO2_INSTANCE_REC2,
l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
EXPORTING
INSTANCE = l_CUOBJ
IS_BUSINESS_OBJECT =
IV_MOMENT =
IV_WITH_DB_INSTANCE =
IMPORTING
IBASE = l_ibase
CONFIGURATION = l_CONFIGURATION
EO_CBASE_REF =
EXCEPTIONS
INVALID_INPUT = 1
INVALID_INSTANCE = 2
INSTANCE_IS_A_CLASSIFICATION = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
ROOT_INSTANCE = l_CUOBJ
IS_CBASE_HEADER =
CHANGING
CONFIGURATION = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT = 1
INVALID_INSTANCE = 2
INSTANCE_IS_A_CLASSIFICATION = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
ROOT_INSTANCE = l_CUOBJ
ROOT_OBJECT = l_ROOT_OBJECT
FORCE_NEW_INSTANCE =
IV_WITHOUT_COMMIT_UPDATE = ' '
IV_MATERIAL =
IV_LOCATION =
IV_TECHS =
IMPORTING
NEW_INSTANCE =
TABLES
EXP_NEW_NESTED_CUOBJS =
EXCEPTIONS
INVALID_INSTANCE = 1
INVALID_ROOT_INSTANCE = 2
NO_CHANGES = 3
ALREADY_REGISTERED_FOR_UPDATE = 4
INSTANCE_IS_A_CLASSIFICATION = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Apex 4.0: Change the Search Field to a Multi Value Check Box IR
I am new here, but hoping to be active :)
Well, now I am focusing on Apex 4 and I find really new things here. And even new order to develope needs time to get used.
Still, I am trying to change the Search Field to a Multi Value Check Box in IR. I have found how to make it in Apex version 3, but not at 4 any more.
Tutorials for apex v.3 write:
1.Click Edit Page 1 on the Developer toolbar.
The Page Definition for page 1 appears.
2. Under Items, click P1_REPORT_SEARCH.
3. From Display As, select Checkbox ans so on...
But I do not find any word "Items" in IR and especially P1_REPORT_SEARCH (I assume this should be by default). Under "Report Atributes" I find "Search bar" region, just there is no option for that. Is here any way to make search with checkboxes in v4?Hi,
Tutorial you have check for APEX 3.x probably works still in APEX 4.x if you use classic report.
As I understand you have now create interactive report that provide out of box search features.
There is no option to change IR search text field to multi select item.
What you can do with IR, is hide/disable search field.
Then you create multi select item and use it in report query where clause.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
Updating a characteristic value (CT04)
I have created a new class with corresponding characteristic. My characteristic has a single value, "01" representing document version number. I the MM, i add this new class to the Classification view for the appropriate material number. However, i have noticed that when we go to update the value in the characteristic, from lets say "01" to "02", we first get an error saying the value cannot be deleted (but the system lets us do this anyway) but more importantly when we do change the value, our hope was that the value in the MM class would automatically be updated as well. That doesnt seem to be the case as I have to physically go into the MM record and delete the class, then re-add it with the new updated value for the update to appear in the MM record as well as AUSP. This is my first time dealing with classifications/classes. Can someone give me guidance on how to achieve something more easily maintained?
In the CLMM transaction, select "Set and Change Values".
In the next screen, enter in 001 for material class in the class type field. Then add the characteristics you wish to change on the tab labelled "Chars". You can just add a new value to change all instances or you can specify an old value to change and only those with matching values will be changed.
Now click on the "Target Objs" tab. Enter in the material numbers you want to change. Click on the indicator "Overwrite Existing Values" to replace values, leave it blank if you are adding new values for a characteristic that allows multiple values.
On the menu bar is a button labelled "Test". Click on this to do a test run and see the log that is generated. When you have all the right selections, and the log looks correct, click on the button to the left of the Test button to execute the changes.
You can also use this to mass change assignments in certain classes. On the first screen, the first choice "Copy Values assigned to object" allow you copy the values from one object to another.. say for instance all the material class values from material A to Material A, B and C.
The third choice is "Assign value in matrix". This is very cool as it gives you a spread sheet form with the all the objects, (materials), listed vertically, and all the characteristics listed across. You can see the current values, and manually change any of the ones you want to.
This can be a very powerful transaction. It should be limited to only a handful of people
Craig -
Change Column Value based on Characteristic in Rows
I am not sure it is possible.
We have product prices at different levels of customer hierarchy.
Channel > Division > Region > Market
One Region can have multiple Markets. Each market can have different Rates. But the Region will have a different Rate which many not be the average rate of all market (assigned as part of master data)
I have a column for Product Price. So when a Report is run at Market Level it should use Market Rate. If Market is Removed and Region is dragged into the report it should use Region Rate for Product Price.
Product Price is Restricted by Rate Type value to determine which Rate is used.
Is there a way to dynamically determine the define the column value based on the characteristic value in the ROWS.
ThanksHi,
For every CHAR like Market/Region there will be some key. For example Maket1 = 11 and Market2 = 22. If that key is a number then you may create replacement path variable on that and convert the same in numbers then you may create various CKF (for various rate type) and put "If" condtion and check for those replacement path CKF and use the apprpriate one.
You need to write some tricky formula at CKF levels. This is one of the way to achieve that.
I hope it will help.
Thanks,
S -
RSRV Check Check if characteristic values of text table exist in SID table
Hello Guys,
I have run the RSRV check Check if characteristic values of text table exist in SID table and I got a warning
when I check the Text table and compare it to attribute table, total entries in text table is more than entries in attribute table..
TEXT TABLE DONT HAVE ANY LANGUAGE...
is it possible that there are more entries in text rather than attributes... again THERE are no language..
Many Thankstry to do a 'select * from table' and catch the
exception as it might fail if the table doesn't exist.Which might take quite a time if the table is big! If you really want to do that I'd use SELECT * FROM table WHERE 1=2
A better way is, to ask the DatabaseMetadata object to retrieve information about the table...
Thomas
Maybe you are looking for
-
Phone service was not suspended while deployed
I left for my deployment to Afghanistan in October of 2013 about a week before I left I brought in a copy of my orders and told them I needed it suspended from November 1st to April 1st. They looked over my orders and said not a problem, typed some
-
How can I retrieve deleted photos from trash?
Please help! My wife accidentally deleted all of the images from the "All Images" folder. This included all pictures in iPhoto and some clip art (about 7,000 files). I am not concerned about the clip art, but the photos are a concern. We had a few do
-
Xfce panel system monitor reading wrong RAM usage
A picture is worth a thousand words: What's up with that ? I just booted up the computer, freshly running system EDIT: Oh, it seems to include cached memory in that display...but that's too much to be cached methinks Last edited by moljac024 (2009-02
-
IPad and Aperture Photo Organization
I've searched these forums but I haven't been able to find a suitable answer to my question. I recently "upgraded" from iPhoto to Aperture 3 for my digital photo library. I rearranged all of my projects in Aperture (Events in iPhoto) and I'm fairly h
-
Best approach to Update / Delete / Insert
Hi Guys I was flicking through my HTML DB Oracle University course notes the other day and was reading about onSubmit processes that are carried out after page submission / computations and validations. The example cited was for an insert statement u