Cube Designer needs BiPlatformWSUrl for BOE4.0 on Netweaver 7.3

Hi,
BOFC Cube Designer doesn't start. It shows the errormessage from note: https://websmp130.sap-ag.de/sap/support/notes/1622392
The resolution descriped in the note doesn't help me.
BOE 4.0 is running on a Netweaver 7.3 Web Application Server. The BiPlatformWSUrl from the note above isn't correct (http://myserver:50000/dswsbobje/services/Session) I've never seen something similar to this.
I've also tried the normal URL to the CMC http://myserver:50000/BOE/CMC/ this doesn't work either.
Can anyone help me finding the correct BiPlatformWSUrl for Cube Designer please.
I would be really thankful....
Best Regards

Hi,
you have posted on the wrong forum, please post it on Business Planning and Consolidations for NW.
Best regards
Roberto

Similar Messages

Need suggestion for designing a BEx report

Hi,
I need suggestions for designing a BEx report.
Iu2019ve a DSO with below structure:
1. Functional Location u2013 Key
2. Maintenance Plan u2013 Key
3. Maintenance Item u2013 Key
4. Call # - Key
5. Cycle u2013 Data Field
6. Planned Date u2013 Data Field
7. Completion Date u2013 Data Field
This DSO contains data like:
Functional -
Plan --- Item -
Call# --- Cycle -
Planned Dt -
Completion Dt
Location
11177 -
     134 -
     20 -
     1 -
T1 -
     02-Jan-2011 -
     10-Jan-2011
11177 -
     134 -
     20 -
     2 -
T2 -
     15-Feb-2011 -
11177 -
     134 -
     20 -
     3 -
T1 -
     15-Mar-2011 -
11177 -
     134 -
     20 -
     4 -
M1 -
     30-Mar-2011 -
25000 -
     170 -
     145 -
     1 -
T1 -
     19-Jan-2011 -
     19-Jan-2011
25000 -
     134 -
     145 -
     2 -
T2 -
     20-Feb-2011 -
     25-Feb-2011
25000 -
     134 -
     145 -
     3 -
T1 -
     14-Mar-2011 -
Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
Thus based upon above data, if I execute report at the end of (say) March then report must display:
Functional ---     Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
Location
11177 -
     T1 -
     15-Mar-2011 -
---     T1 -
--     10-Jan-2011
11177 -
     M1 -
     30-Mar-2011 -
---     T1 -
--     10-Jan-2011
25000 -
     T1 -
     14-Mar-2011 -
---     T2 -
--     25-Feb-2011
Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
Regards,
Vikrant.

hi vikrant,
You can a Cube at the reporting layer which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
You can populate these based on your logic in the field routine.
Hope it helps.
Regards
Dev

I am a studio graphic designer needing to purchase a color jet printer to handle small business takes. I am trying to decide on the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelop

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

I am a studio graphic designer needing to purchase a color jet printer, for my iMac, to handle small business tasks. I am trying to decide between the Epson WorkForce Pro WP-4530 All-In-One Printer OR the HP Officejet Pro Premium e-All-in-One (need second tray for envelopes).
Do you have any recommendations?

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Best Practice For Cube Design

All,
First post here and was wondering if anyone out there has a best practice for cube design or optimisation. Currently have 7 Cubes that have been populated for the last 6 months and am now looking at ways of speeding up their population.
Are there any hard and fast rules about dimensions?
Should they be kept to a percentage of the fact table?
When should line item dimensions be used?
Regards
Gary Boyle

Hi Gary,
Ideally the DIM tables should be 20% of the fact table and preferably less. You can check the size ratios in RSRV using the Database tables test > Database info about InfoProvider tables. Line items dimensions should be employed where the char has a large number of unique values (like 0MATERIAL, or 0CUSTOMER), so that anothe DIM ID is not created, but the SID values are used directly in the Fact Table.
See these for more:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/10b589ad-0701-0010-0299-e5c282b7aaad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
Hope this helps...

Need the Design Standard CS3 for Mac for companies

Our company in 2007, was bought Design Standard CS3 for Windows. The certificate shall have the serial numbers for the Mac platform and Windows. But on the DVD program for the Windows platform.
Now we need the Design Standard CS3 for Mac for companies. Support in Russia can not provide distribution. Help!

Please, help!

Need Design Standard CS3 for Mac for companies

Our company in 2007, was bought Design Standard CS3 for Windows. The certificate shall have the serial numbers for the Mac platform and Windows. But on the DVD program for the Windows platform.
Now we need the Design Standard CS3 for Mac for companies. Support in Russia can not provide distribution. Help!

Thanks for the link. Files can not be downloaded.
A few years ago my company purchased corporate edition of Adobe Creative Suite 3.
Disk set is lost when we move to another office. How can we get or download Adobe CS3?
Software License Certificate
TLP 4.5 LICENSE PROGRAM - CORPORATE
Certificate ID: XXXXXXXXXX

I have a second coppy of cs6 design and web premium. Its only for mac and I need it for pc. Can i swap its platform?

I have a second coppy of cs6 design and web premium. Its only for mac and I need it for pc. Can i swap its platform?

From Adobe: "If you have an older version of a product, you must order an upgrade instead of a swap." Because you have a CS6 suite your only option may be to subscribe to Creative Cloud in order to get current cross-platform versions of all their applications. Check here for further info: Order product | Platform, language swap

Need Help for Page Design Technique: Level 0 Record and Level 1 Record

Folks,
Hello. I am developing HR system for a client. I design a page for "Position Information" as follows:
Level 0 record fields:
Position Number: 01
Status: Open
Because many people are in this position, level 1 record is a scroll area containing many rows belong to this Position Number as follows:
Level 1 record fields:
Profile ID: 001 effective date: xx/xx/xxxx
Profile ID: 002 effective date: xx/xx/xxxx
After save the page into Database, the data in Level 1 record table doesn't match the data in Level 0 record table.
No way to identify the rows of data in Level 1 record table belong to a specific row of data in Level 0 record table.
I need help to design the Database, that is 2 tables: many rows in second table belong to one row in first table.
Can any folks give some idea to design such a Database so that save the Page correctly ?

Table 2 should have all the key fields from Table 1, followed by atleast one more key of its own.
Subhash

I created an account but haven't yet purchase any products yet! I'm a publisher launching a magazine so i need something for design and making a layout for magazine! Please help is there a number i can talk to someone ?

created an account but haven't yet purchase any products yet! I'm a publisher launching a magazine so i need something for design and making a layout for magazine! Please help is there a number i can talk to someone ?

Adobe Connect Support phone numbers
or
Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html

Need solution for a Reporting Requirement

Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry       Invoice Number      Due Date      Amount
8111                   IV1                  13/04/2011 1000
8111                   IV2                  17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry    Week End date AR Amount due
8111     12/04/2010     0
8111     19/04/2010     1000
8111     26/04/2010     2000
8111     03/05/2010     2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
Vipul

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

Adding WHERE condition in "Calculations" tab of SSAS Cube Designer

HI,
I am using SSAS 2012 version to develop SSAS cube
and need help on following scenario :
In the BIDS designer, on the Calculations tab:
I am creating one calculated member called [% Jobs] for which I am writing MDX expression as below :
'([Measures].[On Time jobs]/[Measures].[Total Jobs])*100'
Till here all is well...
Now, How do I implement here WHERE condition ?
For ex., in my fact table I have a column Line_Number
I want to implement above MDX expression such that it only considers Line_Number=1
while doing the above calculation.
Hope it is clear.
Thanks...

I tried with below method :
While keeping the expression as it is :
'([Measures].[On Time jobs]/[Measures].[Total Jobs])*100'
What I did was in the partition tab, i choose option "Query binding" (instead of Table binding) and over there I mentioned the condition
WHERE Line_Number=1
So it should do the calculations only for the first line.
Is this approach also correct ?
Thanks

How to Design a Page for Both Insertion and Updation

Hi,
I have Page where I need to populate a table from Standard PO/AP table and once the save is clicked on the table,
the data shoudl be inserted in custoim table.
Ex: Ui table wil have 3 columns and say 5 rows
- PO#
- Line#
- Amount for 'X' purpose
where PO# and Invoice# is populated and Amount is empty
User will enter value in Amount column in all 5 rows and click on Save button.
Now these 5 rows with 3 columns should be inserted into the custom table (PO#, Line# and Amount)
How Can I design Model Objects for such a requirement?
Thanks,
Kamath

You should create an EO on your custom table and a VO on your EO. As you insert records in the VO, corresponding rows are created as EO rows and when you commit (getOADBTransaction().commit()) in the AM everything would get committed to the DB.
As far as subject goes of having a common page, everytime you can execute the VO with the bind parameters and check whether a row exists. If it does exist then update the VO Row (I expect the master record to be unique row). Otherwise create a new Row for the master and then correspondingly for the details row.
Do let me know in case you need additional information.
Regards
Sumit

How much ram and processing power in my imac will meet my graphic design needs?

Hi,
I'm in the market for a new imac. I'm trying to figure out how much ram I'll need and which processor will be sufficient for my graphic design needs.
I'm gonna need it to be robust enough to have InDesign, Photoshop, and Illustrator open at once along with spotify, safari with many tabs open, and a couple other apps including evernote and game from time to time. Also, I'm gonna be managing a good deal of fonts in font explorer. How much ram and processing power will I need in my imac to keep everything snappy with all these apps going at the same time?
Any advice on this would be much appreciated. Feel free to include any other relevant information you think I should know.
Thanks, Nick

Computers are out of date when you open the box
Ok, getting serious, that iMac should be a viable workhorse for what you want for a good five years, and taht depends on how much ram you put in it, add really fast external storage, and so on.
Didn't throw this in earlier so as to not influence the discussion: my daughter is the senior art director, VP, at a graphics design firm in NYC. Has been in the business for a number of years. When she changed out her Mac at work, bought, or company bought, the 27" iMac model just before the latest, with maxed out CPU/GPU, and storage. They maxed the memory to 32 GB for her, then added a 30" Apple cinema display so she has almost 5' of display in front of her. There is nothing she cannot have open all spread across that display area. She works almost exclusively in print media, occassionally condescends to do web stuff. And has a massive array of RAID drives hanging on it. But that is a setup an individual would be hard pressed to go with.
At home she uses a MacBook Pro with top cpu and display but that is all.
The point, just how massive do you want to go depends on how fast you have to work; in the office where time is money you need tons of horsepower. At home, you scale it to your abilitty to juggle other tasks at the same time.
I think your choices have been great, the discussion has focused on what is important and especially what can and cannot be changed in the future.
Best of luck setting this up.

Wireless Design - Best Practices for Data, Voice, and LBS

Hi,
I am currently in the process of designing a WLAN for a new hospital and I am getting some push back from my sales team. The requirements of the WLAN are data, voice, and location based services (RFID for medical equipment) ... needs to be 2.4 GHz for Guest and some apps/clients but primarily 5 GHz for most of the clients ... lastly needs to be N compatible for future use.
So, I did a predictive design with 1252's on the perimeter with 2.4 and 5 GHz patch antennas and 1142's in the middle to fill gaps ... I also scoped out 2 5508 for redundancy .... total design with -65 at my edges was 169. However, this is getting push back because of several cost issues ....
1. The bundle that Cisco offers for 5 100 AP license 5508 WLC is cheaper than buying 2 250 AP licenses WLC's ... which doesn't make any sense to me because I think 5 devices is over kill
2. The sales engineer is concerned about the power issues with the 1252's ... customer would rather not use power injectors ... and although they would have 6500's at there core ... they would only have basic switches in their IDF's so I wasn't sure which POE Switches would be able to handle 1252 but cost was an issue there as well
So, for my understanding when you are doing a WLAN design for LBS it's always best to have APs or antennas on the perimeter for better triangulation ... it makes more sense to me to do that with patch instead of Omni's ... however my sales engineer wants to use all 1142's ... so my question is what are the pro and cons behind using all Omni's or using Patch and Omni's?
Furthermore, if anyone has any documentation supporting why I would not use all Omni's that would be great because all the articles I have read on LBS just state that placement of APs is critical but doesn't give no specifics on whether it's a good practice to place them on the perimeter using a specific type of antenna or what.
Thanks in advance for you help and any ideas about this design!!!

1. The 5508 is expensive because it's alot faster than the 4400 plus there are some features exclusive to the 5508 such as OfficeExtend. As the old network design adage goes: Your design can be done correctly, cheap or fast. Choose two.
2. The 1250 requires 19.5w of power to enable FULL MCS rates to both radios. Only the 3560E, 3750E or the Sup720 is capable of supporting that. Upgrading the IOS of the 1250 to 12.4(10b)JDA3 will allow the AP to operate both radios at 15.4w BUT at a lower MCS rates. Correct placement of the AP and the correct use of the antennaes will also help in the signal distribution.
3. Patch antennaes are mostly directional. The 1140 is onmi-directional BUT the signal strength is not as powrful as the 1250 at full power. The AIR-ANT2451NV is an omni-directional patch designed for the 1250.
Cisco Aironet Antennas and Accessories Reference Guide
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008022b11b.html
Some of the new patch antennaes for the 1250
Cisco Aironet Dual Band MIMO Low Profile Ceiling Mount Antenna (AIR-ANT2451NV-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2451nv.pdf
Cisco Aironet Very Short 5-GHz Omnidirectional Antenna (AIR-ANT5135SDW-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5135sdw.pdf
Cisco Aironet Very Short 2.4-GHz Omnidirectional Antenna (AIR-ANT2422SDW-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2422sdw.pdf
Cisco Aironet 5-dBi Diversity Omnidirectional Antenna (AIR-ANT2452V-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2452v.pdf
Cisco Aironet 5-GHz MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT5140NV-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5140nv.pdf
Cisco Aironet 5-GHz MIMO 6-dBi Patch Antenna (AIR-ANT5160NP-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant5160np.pdf
Cisco Aironet 2.4-GHz MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2450NV-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2450nv.pdf
Cisco Aironet 2.4-GHz MIMO 6-dBi Patch Antenna (AIR-ANT2460NP-R)
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/data_sheet_ant2460np.pdf

Cube Designer needs BiPlatformWSUrl for BOE4.0 on Netweaver 7.3

Similar Messages

Maybe you are looking for