CUCIMOC interaction with CAPF server

I have cucimoc 8.0.2 registered with cucm 8.0.3 using tcp and udp. Now I want to try TLS. For this, I guess I need to make the cucimoc client interact with CAPF server to get the LSC (local significant certificate). Normally the cisco phones connect to CAPF server after the registration when the appropriate CAPF settings are configured for the phone. But the cucimoc is not initiating any attempt to contact CAPF server when I make similar configuration changes.
Did anyone encounter similar issue and has any solution to overcome it?
Thanks.

CUCIMOC (a.k.a. CSF) uses certificates in its local store (which is the JRE certificate store).
Importing certificates into JRE certificate store is not very intuitive.  You may take a look at CUCIMOC docs or open a TAC case.
Michael
http://htluo.blogspot.com

Similar Messages

  • "Dreamweaver is currently interacting with the server.  Since putting a file on save requires interaction with a server as well  Dreamweaver can not currently perform this task.  Please try again when the server task is complete."

    get rid of this [abusive content removed by moderator]

    Wow this is a long running thread!
    I've discovered, since having to start using check in/check out on a site with multiple editors ('put on save' being a minor version of this), that Dreamweaver is like a nosy neighbour, more concerned with what is going on outside than with your petty demands. So Dreamweaver is constantly checking to see whether any files are in use by anybody else. When it is good and ready it will allow you to interact with the server. If your connection is anything other than rocket powered you will spend ages waiting and looking at messages such as the above. It doesn't have the sense to stop and just check the file/s you want to put or get and then let you get on with it. And of course the bigger the site, the more checking it has to do. If your connection is really slow you will have the added pleasure of constant freezes, aberrant behaviour and crashes. I have this with CS4. I don't know if CS5 is any better. And don't expect any improvement on CS4. You are stuck with it.

  • Interacting with InDesign Server without SOAP

    Hi,
    The documentation in IDS SDK tells that one can interact using Javascript with IDS without using SOAP.
    How can one interact using Javascript and without SOAP?
    I know that with Extendscript one can write scripts and execute it directly.
    But with a simple jsx file only how do I interact with server?

    Hi,
    On Windows you can start the InDesignServer via the console. Then start the Extendscript Toolkit and choose "InDesignServer".

  • Sharepoint 2013 SSRS Interaction with Sql Server 2012 Reporting Services connecting to Sql Server 2008 R2 database

    Hi
    I'm working on upgrading sharepoint 2010 to sharepoint 2013 with sql server 2008 r2. I've ran into some problems but have been able to get a test farm upgraded. However to run SSRS 2013 it seems Sql Server 2012 Reporting Services are required. Upgrading
    to a full sql server 2012 database isn't an option. I know that sql server 2012 reporting services can use sql server 2008 r2 as a catalog and content database so I was wondering could this be a workaround? Importantly would I need a separate machine/virtual
    machine to host sql server 2012 reporting services? or could it live on the sql server 2008 r2 machine? Any pointers appreciated. Thanks Dan

    Remember that SSRS must be deployed on the SharePoint server. Having said that, yes you can install SSRS 2012 SP1 on a server running SQL 2008 R2. And yes, you can use 2008 R2 as your Database Engine server while SSRS 2012 SP1 runs on the SharePoint server.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Interaction with main server application

    Hey
    I am developing a serverside with rpc (soap), which means .jws files running on Tomcat with Axis support.
    My quistion is: how do the jws files (methods) communicate with a main server application. I need a server application to run at all time to get data from an external device. The call to the .jws files makes a call to the server application to retrieve for example the average measured data from the external device.
    Thx
    /Denker

    Hi,
    I am interested in this information too. What I found is this:
    http://groups.google.com/groups?q=%2Btomcat+%2Bjax-rpc&hl=en&lr=&ie=UTF-8&oe=UTF-8&selm=23e544cf.0209112145.21f4d4a%40posting.google.com&rnum=6
    Here's most of it:
    For servlet based web services, JAX-RPC defines the following
    interface:
    package javax.xml.rpc.server;
    public interface ServletEndpointContext {
    public java.security.Principal getUserPrinicipal();
    public javax.xml.rpc.handler.MessageContext getMessageContext();
    public javax.servlet.http.HttpSession getHttpSession();
    public javax.servlet.ServletContext getServletContext();
    If a servlet based endpoint wants to get access to
    ServletEndpointContext object, it should implement
    javax.sml.rpc.server.ServiceLifecycle interface. The servlet contianer
    will then invoke "void init(Object context)" method, passing the
    context object to the user code.
    I still don't know how you hook the JaxRPC implementation (which implement Remote interface) with this. If you found out, please list the whole things step by step (versus just mention above). Thanks.
    I'll do the same when I found out about it.

  • Software to interact with SQL Server

    Hi,
    I am searching a software that can make relation between tables in Oracle DB (9i2) and SQL Server.
    When I made a change in a Oracle table, this change must be automatically transfer to a SQL Server table. Same action for SQL Server to Oracle.
    Do you know softwares or open sources able to do that ?
    Thanks
    Geo

    Data Access:
    SQL Server tables can be accessed from Oracle using Oracle Gateway for Microsoft SQL Server.
    Oracle tables can be accessed from SQL Server using Link Servers.
    Data Replication:
    Oracle Streams can be used to replicate data from Oracle to SQL Server along with the Gateway mentioned above
    SQL Server 2005 also provides a way of publishing Oracle tables to SQL Server subscriptions
    SQL Server also allows replicating data to Oracle using Link Servers

  • Interacting with database from web

    Here's the situation. I have some dumb terminal (client) that interacts with a server, which holds a database. I want users to be able to query that database from the web and have it create a page with the results.
    Since I did not know cgi, or servlets, etc., I devised a primitive method. I was planning on having the database create html files and send it to the webserver so the users can interact with the premade html files. This is not a good idea :) since there would be thousands of files made.
    What is the best way to interact with the database? Servlets? Can you use servlets freely or do you need a commercial license? Please exuse my newbiness :)

    You don't need any commercial software to use Servlets and JSPs.
    Have a look at the Tomcat servlet engine from Jakarta:
    http://jakarta.apache.org
    I expect that if you search these forums (particularly the JDBC and JavaServer Pages forums) you'll find various examples of JSPs and Servlets that connect to a database to allow primitive querying capabilities.
    Hope this helps.

  • Visual Studio 2012 is no longer able to interact with any TFS server

    I can connect to the on-premise TFS2012 server using the instance of VS2012 installed on the server machine as well as the instance of VS2012 installed on a coworker's machine.
    I was able to interact with TFS2012 using the instance of VS2012 installed on my Win7 x64 machine, but only one time. Many reboots later, both of the server itself and my machine, I haven't been able to get VS2012 to interact properly with TFS.
    When I click on "Team" and select "Connect to Team Foundation Server", the "Team Explorer" VS window opens. In that window, no matter what button or link I click on, Visual
    Studio won't connect to TFS or allow me to choose a TFS server.
    1. Clicking on the Home icon takes me to page with two buttons: Pending Changes & settings.
    Clicking on "Pending Changes" takes me to a page where I can do 3 things: click on "no workspace" (nothing happens), click on Actions -> Open Source Control Explorer (which opens an
    empty Source Control Explorer Window, from which I can do nothing), click on "Settings", which shows me a page with 4 options:
    Security: clicking it results in the message "Team Foundation Error. Object reference not set to an instance of an object"
    Group Membership: clicking it results in the message "Team Foundation Error. Object reference not set to an instance of an object"
    Source Control: clicking it results in the message "Value cannot be null. Parameter name: serverName"
    Process Template Manager: clicking it results in the message "Value cannot be null: Parameter name: tpc"
    2. Clicking on the "Connect to Team Projects" icon takes me to a page where I can click on either:
    "Configure Team Projects": clicking it does nothing
    "Connect": clicking it does nothing
    "Sign Up": opens a Visual Studio Online page on my web browser
    If I instead go to File -> Source Control -> Advanced, there is only one option which appears to be working:
    Change Source Control. When I click on it I get a window with a table with rows that correspond to the current solution and the projects in the current solution. ie:
    Solution/Project: {item name}
    Server Name: "<No Server>"
    Server Binding: "<No Server>"
    Connected: {gray uncheckable checkbox}
    Status: "Not Controlled"
    Local Binding:
    Provider:
    Relative path:
    The buttons "Connect", "Disconnect", "Browse" are disabled. Clicking on the "Bind" button results in a window with the message "The mappings
    for the solution could not be found" and two buttons: Ok and
    Help. Clicking on Help results in a white window with the message:
    "The 'EurekaPackage' package did not load correctly. The problem may have been caused by a configuration change or by the installation of another extension. You can get more information by examining the file 'C:\User\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml'.
    Continue to show this error message?"
    Clicking "yes" open the following page on my web browser, which essentially tells me to go back to the "Change Source Control" window and unbind the project, which VS is not letting me do:
    http://msdn.microsoft.com/query/dev11.query?appId=Dev11IDEF1&l=EN-US&k=k%28vs.tfc.sourcecontrol.MessageConnectionManagerCantBind%29;k%28TargetFrameworkMoniker-.NETFramework
    The following is an excerpt from the "ActivityLog.xml" file mentioned in the white window that appeared when I clicked on the "Help" button:
      <entry>
        <record>651</record>
        <time>2013/12/20 13:35:53.354</time>
        <type>Information</type>
        <source>Profile manager</source>
        <description>Begin export of category &apos;Source Control_TeamFoundation&apos; ({2A718788-A6D9-44C5-90EF-438BF5B06A74}) from package &apos;Microsoft.VisualStudio.TeamFoundation.VersionControl.HatPackage, Microsoft.VisualStudio.TeamFoundation.VersionControl, Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a&apos; ({4CA58AB2-18FA-4F8D-95D4-32DDF27D184C}).  3349472 KB of virtual memory currently available.</description>
      </entry>  <entry>
        <record>652</record>
        <time>2013/12/20 13:35:53.354</time>
        <type>Information</type>
        <source>Profile manager</source>
        <description>End export of category &apos;Source Control_TeamFoundation&apos; ({2A718788-A6D9-44C5-90EF-438BF5B06A74}).  3349472 KB of virtual memory currently available.</description>
      </entry>
      <entry> <entry>
    <record>664</record>
    <time>2013/12/20 13:48:51.961</time>
    <type>Error</type>
    <source>VisualStudio</source>
    <description>CreateInstance failed for package [Microsoft.Data.Entity.Design.BootstrapPackage.BootstrapPackage, Microsoft.Data.Entity.Design.BootstrapPackage, version=11.2.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a]</description>
    <guid>{7A4E8D96-5D5B-4415-9FAB-D6DCC56F47FB}</guid>
    <hr>80070002</hr>
    <errorinfo>Could not load file or assembly 'Microsoft.Data.Entity.Design.BootstrapPackage, Version=11.2.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.</errorinfo>
    </entry>
    <entry>
    <record>671</record>
    <time>2013/12/20 13:50:19.757</time>
    <type>Information</type>
    <source>VisualStudio</source>
    <description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
    <guid>{E8B06F41-6D01-11D2-AA7D-00C04F990343}</guid>
    </entry>
    <entry>
    <record>672</record>
    <time>2013/12/20 13:50:19.757</time>
    <type>Warning</type>
    <source>VisualStudio</source>
    <description>Unexpected system error mode before loading package [Visual Studio Web Browser Package]</description>
    <guid>{E8B06F41-6D01-11D2-AA7D-00C04F990343}</guid>
    </entry>
    <entry>
    <record>676</record>
    <time>2013/12/20 13:50:19.820</time>
    <type>Information</type>
    <source>VisualStudio</source>
    <description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
    <guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
    </entry>
    <entry>
    <record>677</record>
    <time>2013/12/20 13:50:19.820</time>
    <type>Warning</type>
    <source>VisualStudio</source>
    <description>Unexpected system error mode before loading package [EurekaPackage]</description>
    <guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
    </entry>
    <entry>
    <entry>
    <record>679</record>
    <time>2013/12/20 13:50:19.820</time>
    <type>Error</type>
    <source>VisualStudio</source>
    <description>CreateInstance failed for package [EurekaPackage]</description>
    <guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
    <hr>80070002</hr>
    <errorinfo>Could not load file or assembly 'file:///C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Extensions\Microsoft\Web Tools\Eureka\Microsoft.VisualStudio.Web.Eureka.dll' or one of its dependencies. The system cannot find the file specified.</errorinfo>
    </entry>
      <entry>
        <record>559</record>
        <time>2013/12/20 14:30:48.880</time>
        <type>Error</type>
        <source>VisualStudio</source>
        <description>Could not convert file time to system time</description>
        <hr>80070057 - E_INVALIDARG</hr>
      </entry>
    </activity>
    What, if anything, can I do in order to be able to get Visual Studio 2012 to interact with TFS?

    I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
    An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context)   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage()   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent()

  • Problem in Interacting with Weblogic JMS through Informatica ETL server

    Hi All,
    We are trying to configure Informatica PowerCenter server to interact with JMS queues created on Weblogic 11gR1 server. We have copied the necessary
    jar file - wlfullclient.jar to the classpath of the Informatica server.
    Now when i try to read contents of a JMS queue created on Weblogic server through Informatica, i get this error:-
    Failed to get the Queue Connection Factory [weblogic.jms.common.DestinationImpl]. Reason: Failed to look up object [While trying to lookup 'weblogic.jms.common.DestinationImpl' didn't find subcontext 'common'. Resolved 'weblogic.jms'Exception Stack: javax.naming.NameNotFoundException: While trying to lookup 'weblogic.jms.common.DestinationImpl' didn't find subcontext 'common'. Resolved 'weblogic.jms' [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'weblogic.jms.common.DestinationImpl' didn't find subcontext 'common'. Resolved 'weblogic.jms']; remaining name 'common/DestinationImpl'
         at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
         at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:464)
         at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:272)
         at weblogic.jndi.internal.ServerNamingNode_1211_WLStub.lookup(Unknown Source)
         at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:418)
         at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:406)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at com.informatica.powerconnect.jms.server.common.JNDIConnection.getJNDIObject(JNDIConnection.java:84)
         at com.informatica.powerconnect.jms.server.common.PlginJMSConnection$PlginJMSQueueConnection.createConnection(PlginJMSConnection.java:363)
         at com.informatica.powerconnect.jms.server.common.PlginJMSConnection.<init>(PlginJMSConnection.java:90)
         at com.informatica.powerconnect.jms.server.common.PlginJMSConnection$PlginJMSQueueConnection.<init>(PlginJMSConnection.java:352)
         at com.informatica.powerconnect.jms.server.common.PlginJMSConnection.create(PlginJMSConnection.java:115)
         at com.informatica.powerconnect.jms.server.reader.JMSReaderSQDriver.createPartitionDriver(JMSReaderSQDriver.java:557)
    Caused by: javax.naming.NameNotFoundException: While trying to lookup 'weblogic.jms.common.DestinationImpl' didn't find subcontext 'common'
    I have checked that this class file exists in the above said location :- "weblogic/jms/common/DestinationImpl.class" within the wlfullclient.jar but still the
    code is not able to access the class. Similar error came initially while doing JNDI connection using "weblogic.jndi.WLInitialContextFactory" class but it vanished,
    when i explicitly named the jar file on classpth, instead of just the folder containing the jar file.
    To all the users/experts/moderators of Weblogic - Could you please help me understand why Weblogic is not able to look up subcontext 'common'
    for the class - "weblogic.jms.common.DestinationImpl" ??
    Thanks & Regards
    Raj
    Edited by: user8931188 on May 17, 2012 7:39 AM

    You are experiencing a NameNotFoundException, not ClassNotFoundException so it seems there is something wrong about the client connection code or WebLogic config.
    Can you share your client connection connection config/code?

  • API for interacting with the Content Server (formerly Stellent) repository.

    Is there any API out there that can be used to interact with the Content Server (formerly Stellent) repository? Where can I find the documentation?

    Hi Chris,
    I have downloaded CIS v8.0 to communicate with the UCM 10gR3 installed on a remote machine. I am able to search but whenever I try to checkin / checkout it throws a ClassCastException.
    I would like to know if you have any info on this. and I am working with Java.
    regards
    Ravi.

  • How Client interact with Server in regular interval

    Hi friends,'
    I want to develop a chat server where the user should sent the request to server in background(as server can not sent response unless the request appears).So on regular request from the Client the server check the updation in database and sent the correspong message to user.
    How can i do this where the Client should interact with server in regular interval?
    Is there any other way to accomplish this ,any reference guide /tutorial to develop this ?
    Regards,
    Sachin Warang.

    You could add an <meta http-equiv="refresh" content="5;http://yourhost/context/servlet/"> to the HTML which will refresh the page every 5 seconds (change the 5 to 10 for every 10 seconds, etc.). The other way is to set up a JavaScript timer and use an XmlHttpRequest to make an asynchronous call to the server and update the HTML dynamically (using DOM) when a response is received (AJAX). Lastly, you could implement the client as an Applet, which gives you a much richer feature set and is a lot cleaner (having half of your app in JavaScript/DHTML is kind of messy).
    There are some vendors, such as IceSoft (http://www.icesoft.com/) producing JSF components that do the AJAX stuff transparently, so you just code a normal JSF app using their components and wire up to bean action methods where you need to.
    - Jesse

  • Security  issue when mi server interacts with multiple backend.

    hii all,
    i wanted to know that if suppose mi server is interacting with multiple backend then how to maintain application access
    security for differnt back end and how & where to customize or configure it.
    thanks in advance.

    Hi Dev,
    Every syncBo has a RFC destination which represent the target system (backend) on which the bapi wrappers for that particular syncBo resides. This RFC destination  is configured in the transaction SM59, which provides you with various secuirty configurations.
    For more info consult your basis consultant in this regards.
    Regards,
    Rahul
    If this helps, do not forget my points

  • Display and interact with a vi front panel on remote C++ app

    Hello:
    I am new to LV and need a little advice.  I need to display a LabVIEW VI front panel in my C++ .Net application that users can interact with to view real-time spectrum data.  The C++ app (client) must reside on a separate computer(s) from the VI so that the client can connect from anywhere around the world and interact with the VI. 
    I am not sure about the basic architecture that should accompany a good solution.  We want to use TCP/IP but not DataSocket.  I do not have access to Measurement Studio but I do have access to LabVIEW Professional Development System v 8.2.  Can anyone provide suggestions on what I need to do in order to
    1.  Connect to my TCP server using my C++ client app - I have already written TCP client and server code which communicate but now I need to integrate LV
    2.  Get access to the VI sitting on that server
    3.  Send the VI front panel to the client for display
    4.  Allow the user to modify parameters on the front panel displayed on the C++ client, send those changes back to the server, and refresh the front panel displayed in the C++ client given the new parameters (I would like a real-time display of the spectrum to always be available)
    Is this possible?  Has anyone done this using C++ .NET in VS2005?  Are there examples I can mimic or references that will help direct me?  I have searched and searched through NI's help and found a lot of good stuff but I'm still feeling confused about the best way to utilize LV.
    Thank you in advance!

    One more question ... what if I could use Measurement Studio?  The documentation seems to indicate that it's easy to create network applications and therefore it would be easy for me to re-create our VI's front panel using Measurement Studio components in my C++ app and then simply connect those components to the networked hardware (TCP/IP or DataSocket) that could be located anywhere in the world.
    Depending on what components you are using in your LabVIEW panel, it is probably pretty easy to build a Measurment Studio application to look like a LV panel.
    Given that, you could use network shared variables to move data across the network, no TCP programming necessary -- I think that this is pretty easy to do, but I don't know the specifics about variable programming in that environment.  Also, you will probably need to add some smarts to the server side to make sure that it is reading to and writing from variables in an appropriate manner.
    Question: why can't you just use LabVIEW for the client application also?

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

  • I have a ipad mini and it says that it has perect wifi yet when i go into safari it says unable to connect with the server how can i fix this?

    I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at  but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps

    The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for