CUCM 9.1.1.20000-5 don't have the device packages for 8831

Hi all,
I have just tried to add the device for 8831 and I didnt see that option available? Can someone guide be to getting the device packages for this version. I went on the software download site and it didnt have any device packages for that version of call manager.
Please advise what are my next steps?

Hi,
you can refer the matrix.What is the UCXN version u are using ?
Supported Version Combinations for Cisco Unity Connection 2.x and Later with Cisco Unified Communications Manager
Cisco Unity Connection
2.x and Later
Cisco Unified Communications Manager
9.1(2), 9.1(1), 9.0(1),8.6(2),8.6(1),8.5(1),8.0(x), 7.1(x), 7.0(x), 6.1(x), 6.0(x), 5.1(x), 5.0(x), 4.3(x), 4.2(x), 4.1(3)
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html#wp100363
you can upgrade if your H/W permits and u have UCSS/ESW contract .Also, if looking for any new features on UCXN 9
regds,
aman

Similar Messages

TS1363 My iPod got stolen and I just want to get my visa card off of it. What should I do? I don't have the serial number for my iPod anymore either cause I got it along time ago... I never saw this happening.

My iPod got stolen and I just want to get my visa card off of it. What should I do? I don't have the serial number for my iPod anymore either cause I got it along time ago... I never saw this happening.

Sorry to hear that.
Lost or Stolen

Need to cancel an auto renewal subscription but don't have the device. can i do it fron itunes.

need to cancel an auto renewal subscription but don't have the device. can i cancel from itunes?

Yes, see that topic of:
iTunes Store: Purchasing and managing auto-renewing subscriptions

My computer crashed, I don't have the serial number for lightroom 4. Is there any way to retrieve the serial number. I can't remember where I purchased this.

My computer crashed, I don't have the serial number for lightroom 4. Is there any way to retrieve the serial number. I can't remember where I purchased this.

Lfiles37 if the serial number has been registered then it will be available under your account. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

I can't change my iCloud account on my iPhone 5 and i don't know the password and i don't have the email address for my old account. how can i change it?

How do i change the iCloud account on my phone when i don't have the email address or password to the one that is on it now?

i cant active my iphone after restor and i forget my apple id and password
can you active my iphone

Need Boot Camp drivers, but don't have the restore discs for 17" iMac

Where can I get drivers for my 1.83ghz iMac if I don't have the discs? I don't only need drivers but software so that I can boot BACK into OS X when I want because my keyboard does not respond until the OS boots so I can't use the Option key at startup.
I need Vista or 7 32-bit drivers.

Hi Mr. Cheeto,
you signature states "OSX 10.6" so I assume that you have a 10.6 Snow Leopard DVD somewhere.
Use that disc which incorporates the BootCamp 3.0 Drivers.
After that you can download the 3.1 update and apply it while in Windows.
The 1.83GHz iMac you have came out in 2006 with OSX 10.4 Tiger.
The Tiger restore disc that came with your iMac didn't had any BootCamp Drivers on it.
BootCamp was then released as a seperate download as long as it was in Beta state.
Regards
Stefan

I don't have the Speed menu for PSE 13 to make my Slideshow.

I have been trying to learn how to make Photo Slideshows with the Photoshop Elements 13. I have viewed many tutorial videos and am now learning that I should have a 'speed' menu option that syncs the slides to the music. It shows the options either normal, brisk or no sync (as default). However, when I open the slideshow builder there is no sign of the 'speed' option - I have even tried to save and reopen from the Organizer to edit and still nothing. Am I missing something - do I need to change a preference? Please help - I really miss Slideshow Creation in PSE 11

I don't have PSE 13, but you may need to be in a different mode (Expert, Quick, Guided tabs at the top of the editor interface).

How do I reset my security questions if I forgot the answers and I don't have the same email for verification?

I Can't remember the answer to my security questions.
THe he default email to reset is old.

If you don't have access to your rescue email account (you won't be able to change it until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : Contact Apple for help with Apple ID account security
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then update your rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID

How can I get into settings if I don't have the exchange password for my iPod Touch

I can't update my iPod Touch, 4th gen. through iTunes because it says it can't connect. I can't get into my settings because it keeps asking for an exchange password that I don't remember. Is there some way I can reset the iPod without having access to either of these means?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Restoreing from backup will not change the need for the forgotton password if the backup was made with password on the iPod
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Doing a clean install of Windows 7, 64 bit. but don't have the necessary drivers for my dv6t-1300

When I searched on drivers for my machine all I get is an offer to scan it for new ones.
I need to download and store all the appropriate drivers so I can reformat the hard drive and do a complete reinstallation of everything.
Where can I find my drivers?
This question was solved.
View Solution.

Hi,
All the drivers and software available to download for your notebook can be found on the following link - ignore the 'Scan Now' option.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3999...
If you can still boot into Windows, another option is to back-up the swsetup folder stored at the root of the C drive - this will contain installers for all the drivers and software that came with your machine ( the only exception is usually trial versions of MS Office ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I don't have the login information for my podcast

I work for a content producer and we're not sure who submitted our podcasts to iTunes years ago. Right now iTunes says that the creator is "Unknown". How do I claim these podcasts as my own and manage the account? I can prove that I own the content, but I have no log in information. Who do I email about that?

You don't actually need the account details to manage the podcast. As long as you have access to the server you can simply update the feed and re-upload it, and iTunes will pick up the changes - subscribers will see changes immediately but the Store will usually take a couple of days to catch up.
If you come to a point where you need the account details you may be stuck. You could email [email protected] and give them the iTunes reference number, but as you can't easily prove that you do indeed own the podcast they well not give you the account details, and almost certainly won't tell you the password (though if you can get the account name you may be able to sign in at http://appleid.apple.com and reset it - this would involve answering pre-set security questions).

Restoring iWeb files when you don't have the DOMAIN file for the folder

Can anyone assist please.
I have recently lost my hard drive in my iMac and have now replaced and recovered as much as I can.
I have managed to recover all my iWeb files but can't get the domain file from the route of the iWeb directory back so every time I start iWeb it try's to create a new web site.
Does anyone know how I can rebuild the Domain file ?
Thanks in advance.

Anthony Poole wrote:
Does anyone know how I can rebuild the Domain file ?
Tony ~ Welcome to the discussions. You'll have to rebuild it manually from scratch — see paragraph 2.3 of this FAQ page for some tips:
http://iwebfaq.org/site/iWebBackupretrieve.html

I have the latest version of iPhoto and now I don't have the Apple templates for emailing photos. What happened? How can I get them back?

I have the latest version of iPhoto and somehow I have lost the ability to use the Apple iPhoto templates for emailing photos. I select my photos, go to Share, go to email, and the templates used to pop up. Now the photos go directly to email. Does anyone know how I can get the templates back?

I encountered the same issue after an upgrade of iPhoto, and it was resolved by clicking on the "iPhoto" button on the menu on the top left of your screen, then "preferences", and in the very first window (General), select the very last pull-down menu "email photos using".
There, you can select various email providers, aol (if set-up), Microsoft outlook, etc... and of course, iPhoto (which should be the very first choice on the pull-down menu).
Select iPhoto, and you will immediately be able to use the templates and make cool cards when emailing your photos from iPhoto.
I hope this helps if your question has not yet been answered.

How to deauthorise when you don't have the device

Hi, I seem to have five devices authorised on my account but at least 1 of these is an old laptop that I forgot to deauthorise. Is there anyway to address this as I cannot authorise my present laptop.

Use the Deauthorize All command documented in this article.
(100148)

I don't have the sim card for the htc thunderbolt, will i be able to update to ics?

I dont have the sim card for the htc thunderbolt, will i be able to update to ics without it or do i need it?

Yep, it wouldn't even look for an update without the SIM card.

CUCM 9.1.1.20000-5 don't have the device packages for 8831

Similar Messages

Maybe you are looking for