CUIC Dashboard permlink not work

Hi everybody,
I have created a permalink for Live Data -  Voice CSQ Summary Report. And seeing by Supervisor without any problem.
However, when I add this live report to a Dashboard, and use Dashboard permalink. (Checked the box - "Enable Unauthenticated Access") 
It shows error: 
Warning [10019] Permission denied - please contact Administrator for permission. 'Voice CSQ Summary Report'.
Anybody knows what mistake I have made?
Thanks in advance 
Sam

Only Agents and Supervisors can view Live Data reports. Ticking the box for "Unauthenticated Access" does not work for LD.
I don't know why Cisco have restricted access to Agents and Supervisors.
Graham

Similar Messages

  • Safari, dashboard & help not working after 10.4.9

    I have loved my iBook since day 1, until 10.4.9. This is my first Apple computer and I was very close to being a convert. I updated through sys prefs to 10.4.9 and now: Safari opens for a split second then closes with kernel errors (or I least I assume from the crash log), no more widgets and dashboard does not work and help files do not work. What gives? I tried downloading the combo update but it was a .exe file. Forgive my lack of tech know how, I know some, enough to get me in trouble evidently. Any help would be greatly appreciated. I have tried booting into safe mode, Safari does the same thing, I have tried repairing permissions in safe mode and in regular mode as admin, nada. HELP!

    I originally updated through sys pref and just let it go. One day later things stopped working. Repairing permissions etc did nothing. Applied the combo update, verified the disk before hand, repaired permissions after the update and reboot, now things are back to normal as far as I can tell, better even in some areas. Hope this can help others with similar problems.

  • Dashboard Widgets not Working or Updating

    I have a 3 week old Macbook Pro and I noticed about a week ago that my dashboard apps not working. I have researched and have not found a solution to the problem. Any help?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

    Yes hello,
    My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
    i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
    i hope to find the fix some how.
    I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
    is there any more info on this matter? is there any support from apple?
    Thankyou

  • Dashboard does not work today.

    I have upgraded both my MacBook Air and my Mac Mini to OS 10.9.2.   The Air works just as it did in 10.9.1.  Dashboard works on the Air.   But Dashboard on the Mini does not operate.  I click on the Dashboard icon in the Dock.  Nothing happens.  I click and hold on the Dashboard icon.  The pop-up menu appears.  In that menu I click "Show Dashboard."  No response.  I click "Dashboard Preferences," and I get the Mission Control Preference.  Here is how that appears:
    I do not see anything here that would disable Dashboard.  
    Does anyone have any idea as to why Dashboard does not work in 10.9.2?  
    TIA

    Hi Richard,
    Thanks for visiting Apple Support Communities.
    If Dashboard does not launch on your Mac Mini, you may want to see if the behavior occurs in a new user account. This article is a good guide for troubleshooting:
    Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    If the same thing happens in a new user account, I recommend reinstalling Mavericks:
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Best Regards,
    Jeremy

  • Dashboard is not working, HELP ME!

    Hi,
    I am running OS X 10.5.2 and dashboard isn't working, It opens and the X appears, I can click on the X and the widget dock pops up but when a click on one dashboard closes. The only widget that opens is the one called "Widgets". Can anyone help me I've tried Yahoo! Answers but nothing there.

    Could be a messed dashboard preferences file. In your home folder, under Library/Preferences/ you have a file called com.apple.dashboard.plist. This is the the dashboard preference file. You can move that file out of that folder, then launch dashboard again. This will recreate the preferences file with defaults.
    Note, however, that this will in effect remove whatever preferences you had previously configured. That is why I suggest moving that file out of that folder rather than deleting that file. If this doesn't work, you can simply restore that file to its proper location.

  • Dashboard Prompts Not Working in OBIEE 10g

    Hi People,
    I  developed a report with two dimension column and a fact column.
    NBTY Level 1
    NBTY Level 2
    Spend Amount
    NBTY Level 1 and 2 are from dimension and Spend Amount is a fact column. Both are joined in star schema. The results are correct.
    So now i published the same report in a new dashboard, and created a new dashboard prompt on Dimension column "NBTY Level 1". I applied filter on the same column (Is Prompted) in report.But when i gave a value in Dashboard Prompt, the report is not changing. I cannot even find any trace of error displayed. When the prompt is selected and clicked on 'GO' button there is no moment in browser, it stays still. I have also permissions and everything is fine
    Can some one please help in finding the problem, its an urgent issue, what possibly could go wrong?

    Thank You for your reply.
    Yes the prompt column is from same subject area.
    I Created a Column Prompt in the report using the same column and it worked for that report. But when i used that prompt in dashboard its not applying.
    I will share a logical query for Report but How should i fing logical query for a prompt?
    The total behavior looks very strange.

  • Dashboard Console not working - opesntack on Oracle Linux 6.6

    I have installed openstack using the instructions at http://www.oracle.com/technetwork/server-storage/openstack/linux/documentation/oracle-openstack-user-guide-2296176.pdf
    I have a Oracle Linux 6.6 as the controller and two nodes of Oracle VM 3.3.2 as compute nodes. I managed to get an instance up and running but not sure how to connect to those instances. When I navigate to the console tab of the instance vnc connects successfully the be screen is blank and I think its not accepting any keyboard inputs as well.
    How do I get the console to work from the dashboard (or connect via a vnc viewer)? Alternately I have used DHCP in the instance and know the private IP of the instance (192.168.1.100), how do I ssh to the instance?
    Amish.

    Hi Amish,
    I saw your comment in other thread and I'll try to answer your questions in the best way I can - but this is huge topic. Please keep in mind that I'm also newbie in this area too and I've encountered many problems getting basic OpenStack installation working, like you. Some of them are still not solved for me either. I also did not get any help here
    Networking in OpenStack is IMO difficult to understand, especially for people like me who are accustom with traditional approach. So this is how I understand it now:
    Networking can be purely software driven and in this case it is carried out by openvswitch (http://openvswitch.org - better get accustom with it if you are not yet). Simple linux bridge - utilized by Oracle VM - is not used by OpenStack. Also there can be hardware plugins which can move some of network features to hardware - but I have no experience in this area.
    There are two types of networks you can create in OpenStack: provider and tenant one:
    Provider networks (also called flat networks) are equivalent of what you set in Oracle VM Manager and in typical (old fashioned) IT world. These are networks which in OpenStack are defined by cloud administrator (You) and bound to existing physical network which are already set by network administrator. For example you have couple of ports on your servers connected to LAN switches, some of them are in access mode some are trunks of specific VLANs. Also routers and other network services are managed outside of your cloud.
    You need to define these networks in OpenStack before any user can connect their VMs to them. The most important part is that can do this from the GUI .
    On the other hand there are so called: tenant networks. These are networks which are under cloud user administration. These are like cloud private networks (if you know Ops Center or Exalogic there is similar notion there) - which are created on-demand by your users. You as cloud administrator only create some limits (quotas) regarding how many such networks can be created by user. But obviously you - as cloud administrator - also need to define mechanisms which allow such networks be created on demand. This also has to be done from command line by editing some files - before users can create tenant networks.
    The mechanism I'm talking about can be: VLAN, VxLAN, GRE.
    First one is the only one currently supported by Oracle and it is quite simple: you, in cooperation with your network administrator reserve range (or set) of traditional VLANs and configure them on network switches where your servers are connected (I mean server ports which you dedicate for tenant networks - not all because you need other network for management, etc). Then you define this set in some OpenStack files to let it manage them on its own. For example: you have got 20 VLANs from network department for exclusive use for your cloud. Nobody knows what each VLAN will be used for yet. This will be allocated by cloud users on-demand. Openstack will just allocate VLAN upon user request and will not allow other users to create their private networks on the same VLAN.
    Better approach is to use VxLAN which is tunneling mechanism. You don't need pool of VLANs in this case but you just set tunneling rules and then OpenStack creates private networks using secure tunnels over L3 network which you define first. VxLAN is standard, you can read about it and it is used by OpenStack for Solaris. Unfortunately this did not work for me and Release Notes from Oracle OpenStack for Linux says that it is not supported yet.
    There is also GRE - which is also tunneling and is similar to VxLAN - but it did not work for me either.
    Where it is all configured? Basic setup is created by packstack using CONFIG_NEUTRON_OVS_* variables. However I used packstack only for installation and then I modified configuration files on all nodes. The most important file where configuration is kept is: /etc/neutron/plugin.ini. In this files you set framework on which provider and tenant networks are build. The most important section is [OVS], for example:
    [OVS]
    enant_network_type=vlan
    enable_tunneling=false
    integration_bridge=br-int
    bridge_mappings=physnet1:br-eth3
    network_vlan_ranges=physnet1:2032:2032,physnet1:3010:3020
    This example is from compute node. It says: I have one physical network: physnet1 which is supported by virtual switch called br-eth3. You need to create this virtual switch on your own! OpenStack networking deamons (Neutron) do not create virtual switches - they only reconfigure them if needed. Physical network is just name which you can use later on if you setup provider network.
    Also, in the example you tell OpenStack that you have 11 VLANs available on physnet1 network. Similar configuration has to be done on controller node (but it is only because in simple topology your controller is also network node)
    Then I dedicated first VLAN: 2032 for provider network. This was accomplished by command issued on controller node.
    # neutron net-create --router:external=true --provider:network_type=vlan  --provider:physical_network=physnet1 --provider:segmentation_id=2032 labnet
    From that moment this network (called "labnet") should appear in the GUI and you can connect VMs to it. Users might also do this if you mark it as "shared".
    Also users should be able to create their private networks and this will allocate VLANs from 3010 to 3020 - so there can be only 10 private networks created totally in your cloud now.
    Of course this is example and you can build completely different setup. You can use different ports for provider networks and for tenants one. You do not need VLANs for provider networks and theoretically for tenant too - but you would have to have plenty of ports for this. If you manage to get VxLAN working - then please share your experience here.
    I strongly recommend reading following information sources (Oracle does  not provide this details in their documentation):
    OpenStack Docs: Current
    https://developer.rackspace.com/blog/neutron-networking-the-building-blocks-of-an-openstack-cloud/  there are more blog entries (followups) on this topic - look for them using keyword "neutron"
    https://www.rdoproject.org/forum/discussion/875/does-rdo-support-flat-network-type-/p1
    As for blank VM console:
    I've also had this problem when I used Cirros VM images. However when I imported the template I use on my Oracle VM - then console was working correctly. I think this is more connected with VM configuration then OpenStack. AFAIK you can connect to console directly using vnc client - at least you can configure Nova in that way that it allows external VNC connections.
    Regards,
    Michal

  • Dictionary on my dashboard is not working. any suggestions?

    dictionary on my dashboard on my desktop is not working.  any suggestions?

    Go to User Library Preferences and move ‘com.apple.dashboard.plist’ to the trash, then restart your iMac.

  • Dashboard Widgets not working...

    I noticed last night that my Dashboard Widgets not longer were functioning.  After searching here, I tried doing "~./Library/Prefrences/com.apple.dashboard" refresh and all, but no joy.  I tried verifying and repairing permissions, but also no joy.  I also can't enable iCloud Calendar and Reminder setting in System and wonder if all these problems are interconnected....

    Thanks,  That got me to thinking and discovered all I had to do was go to System --> Mission Control, turn Dasboard off  and the re-enable it.  It worked right away.  As a side bonus, discovered "Overlay" mode and assigned (unused) F5 for that. Pretty cool!
    Stil no joy on being able to enable Calendar and Reminders in Internet Accounts either.  Although I did notice that I have two instances of the same email accounts setup in email.  Trying to delete one sends me to internet accounts, where there is only one instance.  If I delete that one and go back to Email Prefences Accounts and try to delete the remaining, it errors out saying no UID for it.  I think that "may" be related to the iCloud problems as the iCloud username is also that email address.  Not sure how to get rid of it.  I setup another Mac user login to test and everything works fine.  I just want  to get everything working for the other Mac user login account as it is highly configured.
    Hope that all made sense.
    Thanks!

  • Dashboard does not work in mavericks

    After installing Mavericks on my Fall of 2011 MacMini, dashboard does not seem to function.  It's not there.  It doesn't show up as a space (though I have that checked).  Further it shows my first space as Desktop 9 and if I had another it is Desktop 10 etc.  What happened to desktops 1-8?
    Also, calendar doesn't seem to launch.  It bounces around on the dock, gets the glowing light underneath it, but nothing ever opens.
    Very odd.  It installed fine on two other computers.

    After installing Mavericks on my Fall of 2011 MacMini, dashboard does not seem to function.  It's not there.  It doesn't show up as a space (though I have that checked).  Further it shows my first space as Desktop 9 and if I had another it is Desktop 10 etc.  What happened to desktops 1-8?
    Also, calendar doesn't seem to launch.  It bounces around on the dock, gets the glowing light underneath it, but nothing ever opens.
    Very odd.  It installed fine on two other computers.

  • Dashboard does not work properly when using Word

    This problem occurs persistently. If I am typing something in Word and want to switch over to my Dashboard to use the dictionary or write on a stickie note, two things may happen. If the widget is already selected and ready to be used, then nothing will happen and I can use it properly. However, if I want to click on multiple widgets, then my dashboard will quickly slide over and go back to Word as if I had chosen to exit Dashboard. This only happens when I use Word. Why is this happening and how do I fix it??
    It is frustrating to try and type something in Word, go to my Dashboard to use the dictionary, only to be flung back to Word. The only found remedy is clicking on the desktop and then going to the Dashboard to use my widgets.

    I opened my Word for Mac 2011, opened a document, and Then opened my Dashboard on top of that and used the Dictionary to look up a definition, and changed the month on the Calendar widget, and changed my stock graph interval.  It all worked just as it was supposed to: fine.  You apparently have a corrupted file somewhere.  I do not know where.
    Hope this helps

  • Work Completion in the cProjects Dashboard is not working

    Hi All
    In my cProjects dashboard Work Completion is not reflecting the actial figures. It is always displaying as '000'. I have run the evaluation report for dashboard and all other fields are reflecting except this field. Can you guys let me know what could be the problem.
    Thanks
    Rajesh

    Hi Rajesh,
    have you entered actual work + remaining / planned work? This KPI is calculated based on that. It is NOT the 1:1 aggregation of the % complete on task level. Regards
    Thorsten

  • [SOLVED ]Gedit Dashboard Plugin Not Working

    Hi everybody!  I use gedit 3.6.2 and i have installed additional plugins for it. My favorite one is called Dashboard. It's really cool and helpful because it displays the most used files and recently used files. The problem is that the plugin works but the files are not displayed. What can the issue be and what can be done to fix it? Thank you
    Last edited by gevera (2013-06-22 05:20:33)

    After upgrading to Gnome SHell 3.8 the problem was solved.

  • BC Admin Console Dashboard Tab not working

    The dashboard tab in the BC admin console will not open to reveal contens such as web forms. Only Reports and Site Settings are working. I have webBasics with the Creative Cloud Subscription. webBasics INCLUDES everything in the Dashboard tab.

    What are you talking about, Sidney? Please take a look at YOUR Site Hosting Plans and tell me that Webforms, Social Media Sharing, Content Management, Phone and Tablet Support, FTP and File Manager, ALL PART OF webBasics according to your own Plans!
    http://www.adobe.com/products/business-catalyst/buying-guide-subscriptions.html
    If you're going to offer Creative Cloud Subscribers something LESS than webBasics, then call it webBasics Lite, or webBasics Junior, or something! Don't advertise that webBasics INCLUDES these features, then disable them in our admin consoles. That is false advertising!

Maybe you are looking for