Cumulative query and apd extraction

Hello everyone!
i'm experiencing some trouble, hope you can help!
I have a bex query with a cumulative result.
I want to extract the query result to a csv using the apd
but the extraction only provide the values in a NOT cumulative way.
Is there something i have to set inside the query or something that i can insert building the apd?
Thank you in advance for your answers and your time!
B.r.
Adrians

When you use APD, the system does not use the OLAP processor which is used when the query is run online and some of the features are not available. There are several OSS notes that document the exact differences if you search on APD limitations or RSANWB or RSCRM.
I am not sure but the display cumulative is likely to be one of the settings. You could get what you need by adding an ABAP process to the output of the query in the APD and then code the desired logic in there. I know it is not as clean as you would like it, but unfortunately APD and BEx are not the same.
Edited by: Vineet Gupta on Mar 5, 2012 2:40 PM

Similar Messages

Difference between Infospoke and APD

Hi All,
1 ) Could pls explain me the differnece betwwen Infospoke and Analysis Process Designer (APD).
2 ) When BI team will go for Infosoke or APD.
3 ) What is the use of Infospoke and APD.
Thanks a lot in advance.
Regards,
Nithi.

Hi,
Infospoke ie., open hub service means you are sending data from BW to other systems. Transaction Code : RSBO.
Using info spoke we can put our BW Server as source system and any other database system is target system.
INFOSPOKES:
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c5/03853c01c89d7ce10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/59/90070982d5524b931ae16d613ac04a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f92595-0501-0010-5eb5-bb772d41ffa4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
Document on Infospoke with screeshots: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
The following link has info about the steps in creating a Info Spoke. In the same page there is a link for Extraction to Flat files..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bf/50453c01f4f75fe10000000a11402f/frameset.htm
https://websmp209.sap-ag.de/~sapidb/011000358700002201112003
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f4/5c983cff567f5de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Transaction code RSBMO2 is for Openhub(Infospoke ) monitor.
Analysis Process Designer
Use
The Analysis Process Designer is a workbench with an intuitive graphical user interface for creating, executing, and monitoring analysis processes. The analysis process is primarily based on data that was consolidated in the Data Warehouse and that exists in InfoProviders.
The data can be merged from a number of sources, changed step-by-step using different transformation methods, and displayed in new views. The results of the analysis are then stored, for example in an InfoProvider or in a CRM system. It is then available for all decision and application processes. The Analysis Process Designer is used especially in closed-loop scenarios.
The transformation methods offer, for example, basic operations such as filter, join or formulas, as well as advanced methods for data mining. The data mining methods support you when you explore and identify meaningful relationships in your data.
More information: Data Mining
Examples of analysis processes include calculating ABC classes and determining frequency distribution or scoring information.
You can use queries, database tables, and files as well as InfoProviders as data sources in the analysis process to perform ad hoc analyses. You can also store the results of the analysis directly in a file. Note the data quality of the sources you use, since they normally will not have been included in the ETL process of the Data Warehouse.
Features
Analysis processes can be created on a graphical user interface using drag and drop. Data from different data sources in the BI system can be combined, transformed, and prepared for analysis in several individual steps. This allows it to be resaved in data targets in the BI system (DataStore objects for direct update or InfoObjects with attributes) or in a CRM system. Various
● Data sources
● Transformations
● Data targets
are available.
Various additional functions support you in modeling and executing an analysis process, as well as in interpreting the analysis results. More information: Checking Data
The following figure shows the various steps in the Analysis Process Designer:
First select a data target that contains the required data. This data is then prepared and transformed. The transformed data is saved in a BI object or in another system. For analysis, you can display the data in a query in the Business Explorer.
More information: Modeling an Analysis Process
Use in Process Chains
You can integrate an analysis process into a process chain using the process type ABAP Program. To do this, choose the ABAP report RSAN_PROCESS_EXECUTE.
Versioning
Analysis processes are integrated into the versioning concept (active, inactive version, content version, and content delivery).
Transport Connection
Analysis processes are connected to the BI transport system as TLOGO objects. More information: Transport System
Hope this helps u..
Best Regards,
VVenkat..
Edited by: Venkata Narayana Jakkampudi on Jan 20, 2009 11:30 AM

Can HTML-based reports be built in BLS via an SQL Query and XSLT?

Hello xMII experts,
I have already built a report in xMII which uses XSLT to provide group/sum totals in a web browser. However in a new project, the report must run at certain times and possibly when certain signals become true in the process.
It appears that BLS is a good choice to achieve this and my proposed Transaction was:
1. SQL Query Action(uses the same QueryTemplate as in xMII)
2. XSLTransform Action on the resulting XML resultset (The .xsl file contains HTML which is the original used in xMII to produce the report there)
3. HTML Loader action with the resulting output of the transformation
I have now got some output in the resulting HTML file - however it omits all XSLT code - and I am left with an empty HTML shell but for a few images.
This indicates that perhaps no SQL data was ever returned.
I have therefore two questions:
1. How can I check if the SQL returned data?
2. Is it possible to deliver data to a HTML file directly after an XSLTransformation.
Looking forward to your responses
Best Regards
Robert Sales

Thank you for the replies.
I am a little closer the result I need - however I think I need to explain what I had and what I need a little better.
Before BLS
1 xMII report page (.irpt extension) with two iCalendar applets (start/end date) and a set of buttons (1 for each report)
Upon clicking on a button the two dates are passed into an .irpt file, and via a servlet an SQL QueryTemplate and a XSL DisplayTemplate are used to build the report.
The HTML is embedded in the XSL file - thereby generating the report direct in the web browser.
- This all works fine
With BLS
A transaction which uses a modified SQL QueryTemplate (no date parameters) passing the results to an XML file. This works.
Now when I click on the button in my xMII screen the .irpt file is called with no Date parameters and the xAcute QueryTemplate called with the XSL DisplayTemplate. The irpt file has <html> and <body> tags with XSL file in the Servlet call providing the tables and data extraction from the XML.
I have no additional HTML file so I placed the iframe tag inside the XSL file - but it refers to the .irpt file - this doesn't sound right!
I do get a little output in the web browser but it still omits all XSLT code.
One more point - The Transaction can be scheduled and run as required - but I need the entire report to created and stored for viewing at a later date. Will a servlet tag running inside an .irpt file achieve this?
Sorry for the chaotic writing here - but I must leave the office.
Regards
Robert Sales

Select Query and Recordset on same page

I have been workig with Coldfusion for a while now. Where I work there is a need for web pages to extract data from data sources. I have been successful at doing this. Typically I use a form that selects multiple criteria, which when submitted loads a target/action page that displays records that are filtered based on the SQL statement contained on that action page. What I do is to conditionally check if criteria is passed using cfif. And if a field parameter is indeed passed it becomes part of the cfquery. This works out well - especially for reporting.
But now I am seeing more and more a need to accomplish the same process - but on a single cfm page. So the page I seek will have both the form (select) and the recordset results on the same page.
In this exercise I will be caching results od a query and having several queries to further refine what I seek (QOQ). What I am seeking is the best practice to follow, I was thinking that using an iframe on the page would be and adequate solution whereby the query would pass the criteria and its form action would pass the variable(s) to the action page, which would be the source of the iframe. But I am not certain that this is a best proctice. Nor have I had great success at getting the pages to work in concert.
Any advice that you can lend would be appreciated.

I ideally start by reducing the 2-page functionality - of form page and action page - to just one. It goes like this:
<cfset isValidationPassed = false>
<cfif isDefined("form.someVar")>

</cfif>
<cfif isValidationPassed>

<cfelseif NOT isDefined("form.someVar") OR NOT isValidationPassed>


<cfoutput><form method="post" action="#CGI.SCRIPT_NAME#"></cfoutput>
</form>
</cfif>
The idea is then to pile on the complexity, layer by layer.

Running a background query and converting to csv

Hello All,
We are currently running 3.1 BW. What is the best way to achieve a csv file from a BW query and move that file to another non sap external system. All of the above should have very minimum manual interruption. Please advice.
Xena

Hi Ram,
I found your suggestion very useful, but have a small doubt. While extracting the Query, it is asking for Technical name of extract. Could you please guide me, what to input in that field. If you have any document, kindly pass on.
Thanks
Madhu
[email protected]

Who to query and join nested elements

I have a table that contains a XMLTYPE Field. How do I query and join nested elements. For example I have a schema that has a PerstrenList element that holds one or more Perstren nodes. The Perstren node will contain a RemarksList node that can contain one or more Remarks nodes. My goal is to query all of the Remarks and join them with the information in it's parent node. Without the parent node information the remark is meaningless. Following is a example document and desire result set. I know how to query the Perstren or the Remarks I just can not figure out how to marry the two. The query should only return the remarks joined with the parent information.
<RasDataSet>
   <PerstrenList>
        <Perstren>
           <TPERS>A</TPERS>
           <DEPLY>B</DEPLY>
           <STRUC>5</STRUC>
           <RemarksList>
               <REMARK>
                    <LABEL>ABC</LABEL>
                    <GENTEXT>Hello world</GENTEXT>
               </REMARK>
               <REMARK>
                    <LABEL>XYZ</LABEL>
                    <GENTEXT>Oracle XML</GENTEXT>
               </REMARK>
           <RemarksList>
        </Perstren>
        <Perstren>
       <TPERS>C</TPERS>
       <DEPLY>D</DEPLY>
       <STRUC>4</STRUC>
       <RemarksList>
           <REMARK>
                <LABEL>EFG</LABEL>
                <GENTEXT>Database</GENTEXT>
           </REMARK>
       <RemarksList>
        </Perstren>
        <Perstren>
       <TPERS>E</TPERS>
       <DEPLY>F</DEPLY>
       <STRUC>3</STRUC>
        </Perstren>
   <PerstrenList>
</RasDataSet>
desired Results
TPERS DEPLY   LABEL GENTEXT
A       B       ABC   Hello World
A       B       XYZ   Oracle XML
C       D       EFG   Database
select uic,
        extractvalue(Column_value,'/Perstren/TPERS') as TPERS,
        extractvalue(Column_value,'/Perstren/DEPLY') as DEPLY,
        extractvalue(Column_value,'/Perstren/SECUR') as SECUR,
        extractvalue(Column_value,'/Perstren/STRUC') as STRUC,
        extractvalue(Column_value,'/Perstren/TIME') as TIME,
        extractvalue(Column_value,'/Perstren/AUTH') as AUTH,
        extractvalue(Column_value,'/Perstren/ASGD') as ASGD,
from test_ref doc,
    table(XMLSequence(extract(doc.XML_DOC,'/RasDataSet/PerstrenList/Perstren'))) per
[pre]

Sorry my Pre tag was in the wrong place Text reads:
I have a table that contains a XMLTYPE Field. How do I query and join nested elements. For example I have a schema that has a PerstrenList element that holds one or more Perstren nodes. The Perstren node will contain a RemarksList node that can contain one or more Remarks nodes. My goal is to query all of the Remarks and join them with the information in it's parent node. Without the parent node information the remark is meaningless. Following is a example document and desire result set. I know how to query the Perstren or the Remarks I just can not figure out how to marry the two. The query should only return the remarks joined with the parent information.
Sorry my Pre tag was in the wrong place

ABAP Query and BW Report

Need an understanding of how do we judge or make out that for a particular report we can go for ABAP query and for one we can go for BW report.??? Please provide clear answer with example..
Thanks

Hi,
Your question is very broad based.
ABAP Query is a simple tool in the hands of the Functional consultants to extract information from the tables directly ( u can use complex logic as well ), Example - List all sales orders within a particular period.
But, BW reports are used not for Transactional analysis but for Strategic reporting. Depends upon the nature of data , users of data, availability of data, you should decide. It needs investment in BW module. Report the total sales by region, product etc with trends and graphs.
Thanks
Siva

Using RSCRM_BAPI to convert data from Query and load into PSA to DSO

Hi Experts,
I have a complex query which is being executed in BeX.
I need to go in the reverse direction and extract the data from the Query and load into the PSA and then to a DSO.
I am using RSCRM_BAPI for this purpose and have got data into the extract table successfully.
But , my query has some variable screen wherein we need to give some inputs for selection.
I have create those Infoobjects and put them in the DSO.
How do I capture these inputs of the selection screen for storing in fields of my DSO as the Extract table does not store these inputs ???

write the whole insert query desired by you with the help of excel formulas.they are very easy or google 'how to use excel formulas".
then copy the fromula to whole set of data in excel fields.
run the insert query in excel as batch.
i hope this helps.

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

What is the diff b/w logical query and physical query?

Thanks In advance

In OBIEE terms the logical query is how you query the BI Server, the Presentation services sends logical SQL to the BI Server, you can also write your own using JDBC , pull from BI Server using ODI etc.
The BI Server engine takes this logical query and writes (a number of) phyiscal querie(s) to satisfy the logical request, depeninding on how your BMM and Physical layer is setup. There are a number of rules the BI Server evaluates before deciding the most appropriate Physical query to generate, rules include Physical Joins, Aggregate tales / Hierarchy levels and so on.
Hope this helps,
Good luck with interview :-)
Alastair

Creating a print button to call a Report Query and pass filters

If i use the REPORT QUERY option in APEX 4 to create an statement that is the same one used in an interactive report, can I create a link or button to the REPORT QUERY and pass all the session and filter information from the interactive report to the report query?
This way I can have the interactive report screen where the user can do all sorts of modifications and such and then pass those to the REPORT QUERY so I can call that from a custom link or button.
You may ask "why does he need another print button?"
Answer: I am using a view that has some embedded HTML tags to format the output really nicely. The HTML download version created by the interactive reports works beautifully. The customer also wants a PDF version (meh) which does not render the HTML tags and actually echos them as part of the text. I found that I can create another view that uses the CHR function to create all the breaks and such I was doing with HTML and these do render properly in PDF. So, I figured just have 2 reports: 1 Interactive and 1 using a REPORT QUERY. I just want to call the REPORT QUERY version but use the Interactive Search form to set all the parameters.
Or, am I over thinking this and there is an easier method?
I made a previous post where I showed how I got the APEX printing to work and i hoped that helped someone out - fixing this issue would put the whole thing to rest.
Thanks

Is BI Publisher desktop (MS Word add-in) a possibility? This would allow you to use MS Word to create your output template (RTF) that would result in a properly formatted PDF. Of course, you'd have to right an updated version of the query without HTML embedded. Just thinking outside of the box.

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

How to implement Quick Query and Saved Searches in ADF?

We are using 11gR2 ADF.
The requirement is to enable Quick Search and save the Searches.
In the Oracle ADF documentation, it is mentioned that
- Create a view with view criteria named.
- In the .jspx drag and drop the view criteria and Select Quick Query
Upon doing the above, we see that a Search panel is getting created, but with a message 'No Search Fields Added'.
In the named view criteria, Under 'UI Hints' we have set
-- execution mode as Both
-- Search region mode is Basic
-- Show Operators in Basic
Under 'Criteria Definition'
the attributes are added in a group with OR condition.
Thanks for your reply. Oracle ADF developer guide does not help!!
If you have any other documentation that helps in implementing this Quick Query and Saved Search, your help is greatly appreciated.

Set the following on your af:query component
SaveQueryMode = hidden
ModeChangeVisible = false
This should work for you ..
Regards,

Different LOVs in af:query and af:form for the same VO attribute

Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?

We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel.

Plz help don't know how to create a query and link it to a UDF

hi,
i am new to business one and however hard i am trying to use a query to link it to a UDF, it is not working. i think i am doing the whole thing wrong,so ill just post one problem i have and if any one of u can explain to me in steps i may be able to learn to link other queries and UDFs.so plz help me out .
problem:
i want to display the account balance of every customer/vendor whenvever i open a marketing document. i have created a UDF for the marketing documents in the title with name and description 'account balance'.
Now how do i link the customer/vendor name field to this UDF so that the query generated will show the account balance of the corresponding customer/vendor.plz tell me in steps as to what tables to choose ,what fields to choose, what conditions and relatoins to use in a query wizard
thank you

hi,
A/R invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
A/P invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
FOR OTHER FORMS ONLY CHANGE THE END OF THE QUERY FOR Example
$[OPCH.CardCode]
OPCH is the table name, change it to other table.
save the query and set it to customer code for refresh in A/R invoice
save the query and set it to Vendor code for refresh in A/P invoice
regards
sandip

Cumulative query and apd extraction

Similar Messages

Maybe you are looking for