Cups/hplip Segfaulting

HI boys'n girlz,
My problem in conclusion: i can't set any printer-options from any of my hp printers!
Description:
1.) Cups is starting up normally and i can go to cups interface. When I go to printers tab and try to click "modify printer options" nothing happens, i can't just go to this page!
2.) Trying hp-toolbox for changing settings... i can load hp-toolbox normally and click on all of my printer tabs, except of "printer-settings" tab... hp-toolbox is just segfaulting
3.) I can't look at printer options from any location (for example from okular)
First I thought it was a problem of latest hplip, i compiled an older version and tested it, but no difference.... removed cups completly and installed again, no change, too.
Maybe its some permission problem, etc? My user is in group "lp" and I tried set up an extra group for print-admins, which made no difference!
Someone's an idea? I don't really know where I could look further.
Greetz solid

Re-compiled hplip from ABS and still no joy.
Installed dbus-python; still no joy.
Ran 'qt3config' to populate 'qt_plugins_3.3rc'; didn't populate it
and still no joy.
Here's the output I get:
error: Unable to load dbus - Automatic status updates in HPLIP Device Manager will be disabled.
QSettings: failed to open file '/home/deej/.qt/qt_plugins_3.3rc'
QSettings::sync: filename is null/empty
QSettings: failed to open file '/home/deej/.qt/qt_plugins_3.3rc'
QSettings::sync: filename is null/empty
QSettings: failed to open file '/home/deej/.qt/qt_plugins_3.3rc'
QSettings::sync: filename is null/empty
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_845C?serial=TH1861B8V4SX
warning: Device not found
Segmentation fault
Deej

Similar Messages

CUPS/HPLIP/GIMP not printing photos

Hi all,
Just upgraded from cups 1.5.3-2 to cups 1.5.3-3 plus cups-filters 1.0.18-2 and when trying to print photos with the GIMP + Gutenprint, I get text:
%PDF-1.3
%1234
% This file was generated by pdftopdf
%%PDFTOPDFNumCopies : 1
%%PDFTOPDFCollate : false
(etc)
I had to remove cups-filters and cups, then downgrade to cups 1.5.3-2. At which point I could print photos again. Any ideas? I'm also using HPLIP 3.12.4-1.

patroclo7 wrote:Same problem, same workaround (downgrade cups and libcups and get rid of cups-filters).
Same here too.

Trouble printing with my HP Deskjet printer using CUPS and hplip

tl;dr This 1,646 word post describes my frustration with CUPS and hplip. I cannot get my HP Deskjet F4400 set up with CUPS, and all the solutions I've tried don't work.
I'm running Arch Linux ARM on my Seagate DockStar, a small ARM-based "plug computer" that I use as a home server. My printer is the HP Deskjet F4480, which is part of the HP Deskjet F4400 series.
I previously had CUPS set up to share my printer with my home network, using hplip for the printer driver. I never upgraded CUPS or hplip because those versions worked fine, and I didn't want to break anything avoid breaking anything. The versions that I was using had to have been at least one to two years old.
Everything was working very smoothly... until a few days ago. The drive I was running Arch Linux ARM on became corrupt, so I had to install a fresh copy of the operating system. That meant losing all of the working versions and configuration files each application I had installed, including CUPS. I thought I had a backup image of the drive, but it didn't work when I tried to restore it. (Yes, it was stupid of me not to test my backup.)
Setting up CUPS was one of the first things that I wanted to do after reinstalling, since my family depends on the network printing functionality almost daily. Unfortunately, I could not get CUPS to work with my printer correctly. It wouldn't be able to display a list of drivers, HP's setup utility encountered an error adding it, and it threw various errors when I tried to print test pages. I ended up reading hundreds of forum posts, wiki articles, and CUPS/hplip tutorials to try to figure out how to properly set it up. I ended up spending a total of nearly ten hours trying to get the printer to print with CUPS, and it's still not working after all that work.
I'm going to explain in this post some of the many things that I've tried so far. I just removed all of the printing packages from my system and any extra files that were left behind. I'm now going to be installing all of the packages again and documenting everything that I have been trying to do to get it to work. I'll try to include exact error messages and logs where necessary.
1. I first found this article on the Arch Linux ARM website on how to set up a CUPS printer. I didn't really want to use webmin, but I did it anyway so that I could follow the guide. I installed all the packages mentioned except for cups-pdf, since I didn't need print to PDF support. Everything installed smoothly, and I configured CUPS and webmin to allow access to other computers on the network. I started to notice problems in the instructions - /etc/rc.d/cups was actually /etc/rc.d/cupsd, /etc/printers.conf was actually /etc/cups/printers.conf, and webmin didn't actually add anything to the printers.conf file. I uninstalled webmin at this point because I didn't need it, and I decided I wasn't going to follow that guide with incorrect information.
2. I then tried to set up the printer on my own using the CUPS web interface listening on port 631. I clicked the Add Printer button and it switched me to the HTTPS web interface. I then logged into the root account and was presented with the list of printers. My printer was listed as "HP Deskjet F4400 series (HP Deskjet F4400 series)", so I selected it and continued. I saw a list of printer models (PPD files) ending in CUPS+Gutenprint v5.2.9. There was no entry for my printer, so I tried the "HP DeskJet Series (en)" one. I set the default options and chose Maintenaince->Print test page. I then got a ridiculously simple error: "Unable to print test page: No such file or directory". How do I even know what file or directory it's referencing? I read online that it may be because I'm not in the lp group, but root is indeed in there. I saw in the error log "Avahi client failed: -26". I started dbus and avahi-daemon just in case, but I still got that silly error. I restarted cups and the same error message occured.
3. I researched online that pretty much the only way for my printer to have a driver would be to install hplip. Before installing hplip, I uninstalled CUPS, leaving cupsd.conf but deleting printers.conf. Then I installed CUPS and hplip together, with hplip requiring foomatic-db, foomatic-db-engine, and foomatic-filters. Everything seemed to install correctly. I started CUPS again and then ran hp-setup -i to try to install my printer. I selected USB and it found my printer, hp:/usb/Deskjet_F4400_series?serial=[printer serial number here]. I entered a simple name and then was told that no PPD file was found for the printer but that I could specify one manually. There were none I could find online; everywhere it just said to install hplip. I used the find command to find "f4400" and finally found 2 compressed PPDs located at /usr/share/ppd/HP/hp-deskjet_f4400_series-hpijs.ppd.gz and /usr/share/ppd/HP/hp-deskjet_f4400_series.ppd.gz. I gunzipped both of them and pointed hpsetup to the hpijs one, knowing that I was using the hpijs one when it was working before. It told me "Description for the file: HP Deskjet f4400 Series hpijs, 3.12.6". Hooray! I selected to use it, but then setup failed: "error: Printer queue setup failed. Please restart CUPS and try again." Ugh!
4. I restarted CUPS and went into the hp-setup process again. It gave me the same printer queue setup failed error. I don't know if these entries in the CUPS error log are related or not, but these errors relating to foomatic showed up. I restarted CUPS again and this time used the non-hpijs file with hp-setup. This one was called "Description for the file: HP Deskjet f4400 Series, hpcups 3.12.6". It failed again with the same error and the same entries in the error log. I found lots of posts online about this error, but none seemed to have a solution that would work for me. Now I tried running hp-setup in debug mode with -g. Here is what it said before the error. I then tried to Google "debug: addPrinter() returned (0, Unable to connect to CUPS server)". I saw on an Arch bug report to install dbus-python and python2-gobject, as well as create a symlink for /usr/bin/python2 to /usr/bin/python. It didn't work - same error.
5. I then tried to add the printer to CUPS via its web interface. Now there were two listed, HP Deskjet F4400 series (HP Deskjet F4400 series) and HP Deskjet F4400 series USB [printer serial number here] HPLIP (HP Deskjet F4400 series). So, hplip added the second one. I tried both of them, but after clicking Continue the page started to hang. I got another stupid, undescriptive error. "Unable to get list of printer drivers: Success". I saw the same foomatic errors in the error log as before. I then started reading the ArchWiki page on CUPS, located here. I tried the blacklisting usblp. I tried changing the permissions on the device node, although this starts to become ridiculous that it is even required to do that. Nothing was working; the printer installation still didn't work with hp-setup or with CUPS. Then, I found what I was looking for: the exact error I had on the wiki page! It said for "Unable to get list of printer drivers" you should "Try to remove Foomatic drivers." WTF? Foomatic is required for hplip, and hplip is required for my printer. I can't do that. Forum posts say to try that or do the permissions or usblp thing. Nothing is working.
6. I tried various other things to get it to work, even though I knew they probably wouldn't make it any different. I copied the PPDs from hplip to another folder and uninstalled hplip and foomatic. I then added them to /usr/share/cups/model and CUPS successfully found them and set up the printer. I reinstalled hplip and foomatic since they're needed for those PPDs to function, and I tried printing a test page. It failed. I tried using the CUPS web interface to modify the printer driver; nope, that wasn't going to happen: "Unable to get list of printer drivers: Success".
That concludes the list of some of the things that I have tried so far. I really want to get this printer working, but right now I am really fed up with CUPS and hplip. It's things like this that make me hesitant to recommend Linux to anyone else. So much manual configuration and tinkering the inner workings of things is required to do tasks that would be quite simple on Windows. For example, I can plug this printer into my Windows 7 machine right now, wait for the driver to automatically be installed and configured, and have a test page in my hands less than a minute after I first plugged in the USB cable. I can share the printer with any other Windows machine on the network by checking a single checkbox.
But back to my problem with getting the printer to work on my DockStar. I just uninstalled all of CUPS, hplip, and foomatic again and removed all of their files. I can walk through things to try that you guys post and then give you full logs of everything - just give me exactly what to do and install and the exact order to do it all in. I just don't know what to do at this point and am so frustrated with this that I'm about to give up.
Does anyone have any suggestions on how to get this printer working? I know this was a very long post, but I just wanted to explain everything that I've tried and how nothing worked. I really hope that we can figure this out so that I'll be able to print, and maybe it'll solve a few other people's problems with their printers, too. Thanks for reading, and thanks in advance for the help.

Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
make sure these packages are installed or install them
pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
pacman -S system-config-printer-gnome
rc.d cups start
To add device and install hp driver:
1. Run ‘hp-setup’ as root.
2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
run system-config-printer as root, to add printer
# system-config-printer
click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
you should be ok from here, if not some further steps:
If you encounter the following error:
File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
debugprint (host + “: ” + args)
TypeError: cannot concatenate ‘str’ and ‘list’ objects
You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
4). Finally, you can run hp-check to see what problems exists for the printer.

[solved] CUPS a nd HPLIP issues

I have this old Pentium II machine running LXbuntu 9.04. Everything is working fine on it, except it cannot be upgraded without breaking everything because it is ubuntu.
Also, the CUPS/HPLIP combo is working fine on it and my USB-connected printer is printing (this is old CUPS 1.3.9 and HPLIP is also not particularly new).
So, I installed Arch alongside, updated it, and tried setting up cups/hplip, but I can't get the printer to work.
I get to cusp webadmin, add printer, it finds it, but then when I select it, then select default options, like paper size, and click ADD, the new page appears after 2-3 minutes with this information:
Add Printer HP_DeskJet_845C Error
Unable to get list of printer drivers:
Success
Add Printer HP_DeskJet_845C Error
Unable to get list of printer drivers:
Success
Now, I don't want to be a malcontent seeing the glass half empty so I do appreciate the fact it successfully produced an error, but I would sure like to be able to print something.
Last edited by Lockheed (2012-03-01 16:00:30)

Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux desknik 3.2.7-1-ARCH #1 SMP PREEMPT Tue Feb 21 16:59:04 UTC 2012 i686 Pentium II (Deschutes) GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.7.2 installed
Checking PyQt 4.x version...
error: NOT FOUND OR FAILED TO LOAD!
Checking for CUPS...
Status: scheduler is running
Version: 1.5.2
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.84.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.12.2
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/DeskJet_845C?serial=CN1641P4NPSX
[installation]
date_time = 02/28/12 14:46:18
version = 3.12.2
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/DeskJet_845C?serial=CN16 HP DeskJet 845C
41P4NPSX
| INSTALLED CUPS PRINTER QUEUES |
lpstat
Type: Unknown
Device URI: No destinations added.
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to /etc/sane.d/dll.conf).
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x904 at 001:005:
Device URI: hp:/usb/DeskJet_845C?serial=CN1641P4NPSX
warning: Unable to connect to dbus. Is hp-systray running?
Device node: /dev/bus/usb/001/005
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/005
# owner: root
# group: lp
user::rw-
user:cc:rw-
group::rw-
mask::rw-
other::r--
| USER GROUPS |
lp wheel ftp log http games video audio optical floppy storage camera power users cc abs
| SUMMARY |
error: 7 errors and/or warnings.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
[cc@desknik ~]$
HP Linux Imaging and Printing System (ver. 3.12.2)
System Tray Status Service ver. 2.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: Qt/PyQt 4 initialization failed.
error: hp-systray requires Qt4 GUI and DBus support. Exiting.

[SOLVED] Network trouble with openvpn and hplip

Hi everyone,
I use openvpn to protect my network traffic. But when my PC is connected to the remote openvpn server, my local printer (HP Officejet 4500) is unreachable (for printing and scanning). If I disconnect my openvpn client, all is ok : I can print and scan. Is there a way to have openvpn activated and be able to use hplip devices ?
I use an up-to-date arch x64 install under gnome 3, and printing with cups/hplip. Openvpn is managed thru NetworkManager.
Thank you,
Bruno.
Last edited by bcarnazzi (2013-05-07 06:53:37)

It's a network printer, IP address is : 192.168.1.117 (via DHCP)
ip route show before openvpn connection :
default via 192.168.1.1 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2
ip route show after openvpn connection :
default via 10.8.0.137 dev tun0 proto static
10.8.0.1 via 10.8.0.137 dev tun0 proto static
10.8.0.137 dev tun0 proto kernel scope link src 10.8.0.138
93.115.84.198 via 192.168.1.1 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2
Bruno.

[SOLVED] Problem with usb printer HP Laserjet P1606dn

This printer requires the instalation of a plugin for color and two-side printing.
When I execute the commando hp-plugin in root mode, appears this:
"No protocol specified
hp-plugin cannot connect to X server "
And of course, the plugin is not installed and I don't realize how to solve this problem...
Last edited by LordSkullRA (2011-12-19 19:14:45)

make sure you have installed hplip and the hplip-plugin from AUR (https://aur.archlinux.org/packages.php?ID=44646)
after everything has been installed (cups hplip foomatic-db-engine hplip-plugin ...), run 'hp-setup -i'
Last edited by broken pipe (2011-12-19 09:02:58)

Hp device manager

As per my understanding to add a printer after it is connected first I have to install the hp plugin using the hp device manager. Hp setup later asks for the file or it will download a .run file from internet.
But I dont see in my system where it gets saved. Because I have another computer which is not connected to internet. SO that I can use this file and install the hp plugin.
Or can any one suggest where can I download the hp1008 hp plugin .run file.

First time I tried in the following manner for hp laserjet P1008
I installed cups hplip and foomatic etc as per the wiki
Added user to lp group. Then connected the printer to usb and restarted and printer is shown in lsusb
Then I opened cups local and went to administrator and did find new printers.
It showed my printer "HP_LaserJet_1020_USB_JL09AMB_HPLIP"
Then I did next and it showed a list of all printers. But it automatically selected hp laserjet P1008 hplip related ppd.
Then next is it says printer installed. Then when I do test page it shows status of printing as stopped and some error with the printer.
So some one suggested to install the hp-plugin for 1008 from hpsetup.
After hpsetup I deleted the previousy added printer in cups and again added the printer as above. Then the test page started.
So I felt that first use hp-setup and install the printer related plugin which is downloaded from hp website. That download is not saved in file system I think .
Then using cups add the printer. then it looks it works.

HP Officejet Cannot Setup

I just installed arch for the first time so I know nothing about any of this printer stuff. I need a GUI for printing and scanning. I have tried EVERYTHING I can find on the wiki cups, hplip, xsane, etc.
When I run hp-setup I get: [chad@archlinux ~]$ hp-setup -r
HP Linux Imaging and Printing System (ver. 3.12.11)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Unable to load Qt4 support. Is it installed?
[chad@archlinux ~]$
If I run hp-setup -i
It asks me to to select I/O type. So I push 0 for usb.
It then appears to be working by saying Setting up device: hp:/usb/Officejet_4500_G510n-z?serial=CN1A6K30JG05HR
Then is says to enter name for this print queue. I push m for use model name.(Officejet_4500_G510n-z)
It then says: Using queue name: Officejet_4500_G510n-z
Locating PPD file... Please wait.
warning: No PPD found for model officejet_4500_g510n-z using new algorithm. Trying old algorithm...
error: No PPD found for model officejet_4500_g510n-z using old algorithm.
error: Unable to find an appropriate PPD file.
would you like to specify the path to the correct PPD file to use (y=yes, n=no*, q=quit) ?
Do I have this PPD file somewhere or something? Can someone please help me here I need this for school and quick!
Thanks a ton, Chad.
BTW I would like to just be able to click print in libre office and have it work. Is this even possible?
Last edited by chadcurtiss (2012-12-03 19:38:44)

Try cups and hplip.
Start cups and point browser to http://localhost:631/ I think it is.
Last edited by nomorewindows (2012-12-03 21:14:33)

Where is AIF?

I wanted to use an AIF automatic install with a configuration file.
Unfortunatly my latest Archboot doesn't have the AIF package any more.
Is this normal? and how can I get AIF back to my Installation cd?
Regards

How can I use grub2 for aif automatic installation
# Source und Mirror
SOURCE=net
SYNC_URL=http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/x86_64
# Installiere folgende Gruppen:
TARGET_GROUPS='base base-devel gnome libreoffice'
TARGET_PACKAGES_EXCLUDE='reiserfsprogs nano grub heirloom-mailx jfsutils lvm2 ppp psmisc vi wpa_supplicant xfsprogs at-spi2-atk at-spi2-core epiphany gnome-media libreoffice-kde4 libreoffice-sdk libreoffice-sdk-doc libreoffice-common'
# Installiere folgende Packete:
TARGET_PACKAGES='xorg-server xorg-xinit xorg-utils xorg-server-utils xf86-video-intel vim openssh eog evince gnome-tweaks-tool gedit evolution gnome-mplayer gdm cups hplip file-roller gcalctool'
# MBR
GRUB_DEVICE='/dev/sda'
# Partitionierung
PARTITIONS='/dev/sda 300:ext2:+ 8000:swap *:brtfs'
BLOCKDATA='/dev/sda1 raw no_label ext2;yes;/boot;target;no_opts;no_label;no_params
/dev/sda2 raw no_label swap;yes;no_mountpoint;target;no_opts;no_label;no_params
/dev/sda3 raw no_label btrfs;yes;/;target;no_opts;no_label;no_params'
Last edited by archer42 (2011-09-06 20:05:14)

[SOLVED] HPLIP and foomatic really needed for CUPS?

Hi there,
Wanting my HP Laserjet 5M printer to get up and running, at first glance it appears that i have to use the HPLIP package to get it to work with CUPS. When trying to install the HPLIP package pacman states that it also needs foomatic-db. Total installed size would be about 87Mb. Is it really necessary to install HPLIP and foomatic to get my Laserjet going under CUPS? I rather would install only the driver I really need, instead of a 'one for all' package. Or is the biggest part of the HPLIP and foomatic package really needed by the system?
Regards,
Frank
Last edited by senaxo (2010-05-20 11:03:14)

Ok, it appears that I only needed two things:
1. The appropriate PPD file for the printer
2. The package 'foomatic-rip' to be installed
I've downloaded the PPD for my laserjet printer from http://www.openprinting.org/printer/HP/HP-LaserJet_5M and after adding the printer via the CUPS webinterface using that PPD file of the printer (and after installing 'foomatic-rip') the printer seems to work perfectly.
Quite a difference to installing the whole 'hplip' and 'foomatic-db' packages and all their dependencies.
Frank

Xfprint4 Segfault

My first post and it had to be a problem...
Not been using Arch long (about 2 weeks), but loving it so far. Got most things running the way I like except printing.
I am running XFCE and followed the wiki entry to install CUPS and hplip. I installed and set up my printer (HP DeskJet on local USB port) through the localhost:631 admin interface. I also changed the XFCE printing system (through Settings) to CUPS.
I was able to print a test page OK from the CUPS admin pages and thought everything was good. Then I tried printing from Mousepad and got this error:
xfprint4[8960]: segfault at 00000004 eip 08050fad esp bfb4e950 error 4
Anybody seen this before?
Thanks!

My first post and it had to be a problem...
Not been using Arch long (about 2 weeks), but loving it so far. Got most things running the way I like except printing.
I am running XFCE and followed the wiki entry to install CUPS and hplip. I installed and set up my printer (HP DeskJet on local USB port) through the localhost:631 admin interface. I also changed the XFCE printing system (through Settings) to CUPS.
I was able to print a test page OK from the CUPS admin pages and thought everything was good. Then I tried printing from Mousepad and got this error:
xfprint4[8960]: segfault at 00000004 eip 08050fad esp bfb4e950 error 4
Anybody seen this before?
Thanks!

Problem with HP printer hplip is not starting

My daemons line
DAEMONS=(syslog-ng portmap dbus hal network netfs hplip cups clamav alsa acpid !crond kdm)
I have installed it using pacman. If I run pacman -S hplip I get a message saying it is already there.

Okay, after a search I come up with the preferred printer installation method using the hp-setup command line tool. As this is supposed to be the 'HP' way to setup the printer and use hp-toolbox I decided to go this route. Naturally, the output is not promising:
# hp-setup
HP Linux Imaging and Printing System (ver. 0.9.8)
Printer/Fax Setup Utility ver. 0.7
Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[ERROR]: No devices found.
[ERROR]: Error occured during interactive mode. Exiting.
Now, why the heck would it not find the device when it is already set up via CUPS and working properly in the desktop environment? The latest hplip version is 0.9.10, but I somehow doubt using the 0.9.8 would cause this type of problem as the printer I use is not a recent piece of machinery.

Cannot print PDF files: "/usr/lib/cups/filter/pdftops failed"

Hi
I have a HP Deskjet D1460 printer (crap, i know ). I'm using hplip 3.11.1 drivers and CUPS 1.4.6hplip 3.11.1.
Today i wanted to print a pdf file, and my printer just silently refused to work, like they always do I did some log-scavenging, and found this rather long one:
E [11/Feb/2011:12:44:36 +0100] [Job 24] Job stopped due to filter errors; please consult the error_log file for details.
D [11/Feb/2011:12:44:36 +0100] [Job 24] The following messages were recorded from 12:44:30 to 12:44:36
D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding start banner page "none".
D [11/Feb/2011:12:44:36 +0100] [Job 24] Queued on "Deskjet_D1400" by "kaszak".
D [11/Feb/2011:12:44:36 +0100] [Job 24] Auto-typing file...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Request file type is application/pdf.
D [11/Feb/2011:12:44:36 +0100] [Job 24] File of type application/pdf queued by "kaszak".
D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding end banner page "none".
D [11/Feb/2011:12:44:36 +0100] [Job 24] job-sheets=none,none
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[0]="Deskjet_D1400"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[1]="24"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[2]="kaszak"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[3]="przelew.pdf"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[4]="1"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[5]="finishings=3 number-up=1 page-ranges=1 job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5 job-originating-host-name=localhost time-at-creation=1297424670 time-at-processing=1297424670 AP_D_InputSlot="
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[6]="/var/spool/cups/d00024-001"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[8]="HOME=/var/spool/cups/tmp"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[10]="SERVER_ADMIN=root@localhost"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[11]="SOFTWARE=CUPS/1.4.6"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[13]="USER=root"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[16]="IPP_PORT=631"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[17]="CHARSET=utf-8"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[18]="LANG=pl_PL.UTF-8"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[19]="PPD=/etc/cups/ppd/Deskjet_D1400.ppd"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[20]="RIP_MAX_CACHE=8m"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[21]="CONTENT_TYPE=application/pdf"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[22]="DEVICE_URI=hp:/usb/Deskjet_D1400_series?serial=TH7B13311X04Y2"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[23]="PRINTER_INFO="
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[24]="PRINTER_LOCATION="
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[25]="PRINTER=Deskjet_D1400"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[26]="CUPS_FILETYPE=document"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[27]="FINAL_CONTENT_TYPE=printer/Deskjet_D1400"
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/pdftops (PID 2793)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/foomatic-rip-hplip (PID 2794)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started backend /usr/lib/cups/backend/hp (PID 2795)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pdftops (PID 2796)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pstops (PID 2797)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Page = 612x792; 18,36 to 594,783
D [11/Feb/2011:12:44:36 +0100] [Job 24] slow_collate=0, slow_duplex=0, slow_order=0
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_comments - %!PS-Adobe-3.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] %!PS-Adobe-3.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%LanguageLevel: 3
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentSuppliedResources: (atend)
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentMedia: plain 596 842 0 () ()
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%BoundingBox: 0 0 596 842
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%Pages: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%EndComments
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_prolog - %%BeginDefaults
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_setup - %%BeginSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] foomatic-rip version $Revision=3.0.2.131$ running...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Parsing PPD file ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ColorSpace
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Resolution
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageSize
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Model
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PrintoutMode
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Quality
D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip-hplip"
D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip-hplip"
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageRegion
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ImageableArea
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PaperDimension
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Font
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Parameter Summary
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------------
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Spooler: cups
D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer: Deskjet_D1400
D [11/Feb/2011:12:44:36 +0100] [Job 24] Shell: /bin/sh
D [11/Feb/2011:12:44:36 +0100] [Job 24] PPD file: /etc/cups/ppd/Deskjet_D1400.ppd
D [11/Feb/2011:12:44:36 +0100] [Job 24] ATTR file:
D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer model: HP Deskjet d1400 Series hpijs, 3.11.1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Job title: przelew.pdf
D [11/Feb/2011:12:44:36 +0100] [Job 24] File(s) to be printed:
D [11/Feb/2011:12:44:36 +0100] [Job 24] <STDIN>
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'finishings=3'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option finishings=3.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'number-up=1'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option number-up=1.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'page-ranges=1'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option page-ranges=1.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-originating-host-name=localhost'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-originating-host-name=localhost.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-creation=1297424670'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-creation=1297424670.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-processing=1297424670'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-processing=1297424670.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'AP_D_InputSlot='
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option AP_D_InputSlot=.
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] File: <STDIN>
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Reading PostScript input ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] --> This document is DSC-conforming!
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %RBINumCopies: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another "%%Begin..." comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginProlog
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndProlog
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PageSize Letter
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PrintoutMode Normal
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *Quality FromPrintoutMode
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before page loop - %%Page: 1 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Copying page 1...
D [11/Feb/2011:12:44:36 +0100] [Job 24] pagew = 576.0, pagel = 747.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [11/Feb/2011:12:44:36 +0100] [Job 24] PageLeft = 18.0, PageRight = 594.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] PageTop = 783.0, PageBottom = 36.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] PageWidth = 612.0, PageLength = 792.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting PostScript code for CUPS' page accounting
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
D [11/Feb/2011:12:44:36 +0100] [Job 24] New page: 1 1
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginPageSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting option code into "PageSetup" section.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndPageSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] End of page header
D [11/Feb/2011:12:44:36 +0100] [Job 24] Stopping search for page header options
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: S
D [11/Feb/2011:12:44:36 +0100] [Job 24] --> Output goes directly to the renderer now.
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting renderer
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer PID kid4=2802
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3320" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting process 2803: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [11/Feb/2011:12:44:36 +0100] [Job 24] JCL: <job data>
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2796 (pdftops) exited with no errors.
D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/hpijs/hpijs.cpp 650: WARNING: color pen has low ink
D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 9
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 9
D [11/Feb/2011:12:44:36 +0100] [Job 24] Caught termination signal: Job canceled
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/backend/hp.c 839: ERROR: null print job total=0
D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2797 (pstops) crashed on signal 13!
D [11/Feb/2011:12:44:36 +0100] [Job 24] End of messages
D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state=3(idle)
D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-message="/usr/lib/cups/filter/pdftops failed"
D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-reasons=marker-supply-low-warning
E [11/Feb/2011:12:45:56 +0100] [Job 22] Stopping unresponsive job!
E [11/Feb/2011:12:49:41 +0100] [Job 24] Stopping unresponsive job!
To be honest, it looks more like a Chinese poem rather than error log. I found this part the most disturbing:
D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
Anyone had such problems before? Just don't tell me this cursed device demands a sacrifice from freshly produced virgin paper sheets to chew on.
Other non-pdf documents print succesfully.

just got hit with thie same error on my canon printer, and I was told I should try reinstalling the printer (not sure if that's meant for the driver or the actual printer in CUPS, but I intend to try both...

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

{SOLVED}SAMBA/CUPS Printer gone on both Linux and Windows Computers

Greetings all,
Have found myself in a pickle that has got me scratching my head.
For a while now, I have had a headless server set up with Arch Linux with SAMBA and CUPS installed. All computers in the house have had the printer set as default and have been working fine. Have not had to print anything in about a week. Wife went to print a coupon and told me that it would not print.
I went to my Windows computer and sure enough, the printer no longer even shows up on the network. I have not touched my smb.conf or changed any CUPS parameters so I am stumped why the printer is no longer accessable.
When I go into my CUPS Web Interface it shows the printer and shows it as idle
Officejet_7300 Automatically setup by HPLIP HP Officejet 7300 Series, hpcups 3.12.10a Idle
Here is my smb.conf which like I mentioned earlier has not been touched.
#======================= Global Settings =====================================
[global]
log file = /var/log/samba/%m.log
printer = HP_7400
guest account = nobody
load printers = yes
printing = cups
server string = Samba Server
path = /var/spool/samba
workgroup = WORKGROUP
hosts allow = 192.168.0. 192.168.1. 192.168.2. 127.
security = share
max log size = 50
; printcap name = /etc/printcap
; printcap name = lpstat
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
;[homes]
; comment = Home Directories
; browseable = no
; writable = yes
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
[Storage]
comment = Home Data Storage
path = /home/storage
valid users = ichase ian sharon
public = yes
writable = yes
browsable = yes
create mask = 0777
directory mask = 0777
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
Set public = yes
guest ok = yes
writable = yes
printable = yes
The Storage drive is still accessable by all computers in the house. This would be a piece of cake if I had actually gone in and changed something but nothing has been changed. Not sure when the printer decided to take a hiatus.
Thanks as always for your help and if there is any other files or command output I can provide, let me know.
Ian
Last edited by ichase (2012-12-14 23:27:04)

ewaller - good point, I actually did try shutting down the printer and turning it back on. But to no avail. I may not have touched any of the configuration files but I have run updates on the server via secure shell from my laptop. So one of the updates may have caused this issue. I believe that maybe the HP driver may have been updated and that could be the issue. May need to look at going back to the older version of the driver.
WonderWoofy - Thanks for the response, as mentioned above (and actually it just came to mind when I was typing it) the updated driver may have caused the issue. Drivers and support has come a long way in regards to Linux though there is definitely more work that can be done.

Cups/hplip Segfaulting

Similar Messages

Maybe you are looking for