Curl: (25) Failed FTP upload: messages.log: Access is denied

iam trying to copy the messages.log to my ftp server from a cue and am getting this messages
curl: (25) Failed FTP upload: messages.log: Access is denied
the command iam using is below
copy log messages.log url "ftp://[email protected]"
anything wrong on my sysntax

do you have the any no access / locked sites in that database and also any site which exceed its quota.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Similar Messages

I have been uploading muse to my server for months...all of a sudden I get an error - Error uploading FTP Host (Failed FTP upload 550) what is this?

I have been uploading muse to my server for months...all of a sudden I get an error - Error uploading FTP Host (Failed FTP upload 550) what is this?

Hi,
Your reply is blank. Looks like you tried to insert the screenshot but it didn't come through. Please use the image attachment option in the reply window to insert the screenshot.
Regards,
Aish

FTPホストにアップロードでFailed FTP upload;550が発生する

Muse CC 2014
2014.2.0.569
Windows7Pro 64bit
今まで問題なくアップロードできていたのですが？

HTML書き出しによるFTPクライアントでのアップロードを試しました
今回変更したｈｔｍｌと、追加したｈｔｍｌは正常に表示されますが
変更していないｈｔｍｌを開いた最初に
「サーバー上の一部のファイルが見つからないか正しくない可能性があります。・・・」が全て表示され
ＯＫの後は正常に表示されますが、再度表示するときにまた同じメッセージが出てしまいます。
書き出されたフォルダーは３個
css、images、scripts
.xmlが２個
muse_manifest.xml、sitemap.xml
後はｈｔｍｌのページだけです。
書き出しもうまくいってないのでしょうか？
アドバイスお願いします。

FTP upload(access denied:530)

Says check username and password, but both are correct. Any advice?

Please see this thread <Re: Failed FTP upload: 553 error>.

Message Tracking and Queue Viewer access is denied - Exchange 2010

Hello,
I am experiencing Message Tracking and Queue viewer problems on my exchange server.
Message Tracking problem
When i run message tracking via EMC or powershell, i receive the following error;
Failed to connect to the Microsoft Exchange Transport Log Search server on computer "myserver.mydomain.com.br". Verify that a valid computer name was used and the Microsoft Exchange Transport Log Search service is started on the target computer. The
error message is: "Access is denied".
Exchange Transport Log Search service is confirmed running and have tried by restarting the service
Logon user is a member of Domain Admins, Enterprise Admins and Exchange Organization Administrators
Message Tracking Logs are generated properly
Queue Viewer problem
When i run Queue viewer, i receive the following error;
The Queue Viewer operation on computer "myserver.mydomain.com.br" has failed with exception. The error message is: Access is denied. It was running command.............................................................
My server information are as follow;
4 Exchange Server 2010 sp3
2 Mailbox Server and 2 Hub/CAS
Mail-flow is working fine
What should I grant permission for a group of users can have access to the Message Tracking ?
Regards,

Hi!
The group rule was created as described below. The error persists!
[PS] C:\Windows\system32>Get-RoleGroup "Exchange Access Message Tracking" | fl
RunspaceId                  : 4229f35d-90f1-4c4e-822d-387979921052
ManagedBy                   : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
RoleAssignments             : {Message Tracking-Exchange Access Message Tracking}
Roles                       : {Message Tracking}
DisplayName                 :
ExternalDirectoryObjectId   :
Members                     : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
SamAccountName              : Exchange Access Message Tracking
Description                 :
RoleGroupType               : Standard
LinkedGroup                 :
Capabilities                : {}
LinkedPartnerGroupId        :
LinkedPartnerOrganizationId :
IsValid                     : True
ExchangeVersion             : 0.10 (14.0.100.0)
Name                        : Exchange Access Message Tracking
DistinguishedName           : CN=Exchange Access Message Tracking,OU=Microsoft Exchange Security Groups,OU=Global,DC=ba
                              ncobmg,DC=com,DC=br
Identity                    : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Trackin
                              g
Guid                        : 0957152d-2073-4f75-b40e-63f45eb20f67
ObjectCategory              : bancobmg.com.br/Configuration/Schema/Group
ObjectClass                 : {top, group}
WhenChanged                 : 06/02/2014 16:25:26
WhenCreated                 : 06/02/2014 16:25:26
WhenChangedUTC              : 06/02/2014 18:25:26
WhenCreatedUTC              : 06/02/2014 18:25:26
OrganizationId              :
OriginatingServer           : bmg190.bancobmg.com.br
[PS] C:\Windows\system32>Get-ManagementRoleAssignment "Message Tracking-Exchange Access Message Tracking" | fl
RunspaceId                   : 4229f35d-90f1-4c4e-822d-387979921052
User                         : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                               ng
AssignmentMethod             : Direct
Identity                     : Message Tracking-Exchange Access Message Tracking
EffectiveUserName            : All Group Members
AssignmentChain              :
RoleAssigneeType             : RoleGroup
RoleAssignee                 : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                               ng
Role                         : Message Tracking
RoleAssignmentDelegationType : Regular
CustomRecipientWriteScope    :
CustomConfigWriteScope       :
RecipientReadScope           : Organization
ConfigReadScope              : OrganizationConfig
RecipientWriteScope          : Organization
ConfigWriteScope             : OrganizationConfig
Enabled                      : True
RoleAssigneeName             : Exchange Access Message Tracking
IsValid                      : True
ExchangeVersion              : 0.11 (14.0.550.0)
Name                         : Message Tracking-Exchange Access Message Tracking
DistinguishedName            : CN=Message Tracking-Exchange Access Message Tracking,CN=Role Assignments,CN=RBAC,CN=BANC
                               O BMG SA,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=bancobmg,DC=com,DC=br
Guid                         : c3768a00-3f36-4532-b586-a06842a85e24
ObjectCategory               : bancobmg.com.br/Configuration/Schema/ms-Exch-Role-Assignment
ObjectClass                  : {top, msExchRoleAssignment}
WhenChanged                  : 06/02/2014 16:25:26
WhenCreated                  : 06/02/2014 16:25:26
WhenChangedUTC               : 06/02/2014 18:25:26
WhenCreatedUTC               : 06/02/2014 18:25:26
OrganizationId               :
OriginatingServer            : bmg190.bancobmg.com.br
How can I identify if there is any setting to be done?
Thank you!

Group Policy Preferences File Copy - Access is Denied on 2003 but not 2008 R2

Hello,
I have created a GPO which copies a file from a network share into a new folder under Program Files. This policy works just fine on a Windows 2008 box, but not on 2003. I've used "psexec -i -s cmd.exe" to verify system account permission to the
share. I am able to successfully browse and copy files from the share as the system account on both boxes.
However, when the GPO attempts to perform the file copy, it does not work, and generates the following error message:
Event Type: Warning
Event Source: Group Policy Files
Event Category: (2)
Event ID: 4098
Date: 8/28/2013
Time: 3:32:12 PM
User: NT AUTHORITY\SYSTEM
Computer: Server01
Description:
The computer 'file.txt' preference item in the 'TXT File Copy {9176122B-1A50-4AB8-91D9-6E8553727E18}' Group Policy object did not apply because it failed with error code '0x80070005 Access is denied.' This error was suppressed.
I am trying to avoid writing a login script, so I am hoping someone will be able to help me figure out why this works fine on Windows 2008 but not Windows 2003. Please note file names and paths are modified here for security reasons, but the principle is
the same.
My GPO is:
Computer Configuration\Preferences\Windows Settings\Files
File (Target Path: c:\Program Files\path\to\file\file.txt)
Source file: \\share\path\to\file\file.txt
Destination File: c:\program files\path\to\file\file.txt
Action: Update
Suppress errors on individual file actions: Disabled
Read-Only: Enabled
Hidden: Disabled
Archive: Enabled
Stop Processing items on this extension if an error occurrs on this item: No
Remove this item when it is no longer applied: No
Apply once and do not reapply: No
Item-level Targeting: None
Thanks

As a user, I am able to browse the share just fine using the alias. It is only when I try to access the share using the system account that I encounter a problem.
experiencing the exact same symptoms. in the tests below, server, client1, and client2 are all are native instances of microsoft windows server.
server: windows server 2008 R2 standard SP1
client1: windows server 2003 standard SP2
client2: windows server 2008 R2 standard SP1
registry setting "DisableLoopbackCheck": unconfigured on server; unconfigured on client1; unconfigured on client2
registry setting "DisableStrictNameChecking": configured as "1" on server; unconfigured on client1; unconfigured on client2
domain user on client1 attempt to access server by name: success
domain user on client1 attempt to access server by alias: success
domain user on client2 attempt to access server by name: success
domain user on client2 attempt to access server by alias: success
local system on client1 attempt to access server by name: success
local system on client1 attempt to access server by alias: failed (system error 5 has occurred. access is denied.)
local system on client2 attempt to access server by name: success
local system on client2 attempt to access server by alias: success
all tests done using "net view \\target", but similar results were seen when using "dir \\target\share" which the domain user and local system account have access to.
the differing behavior between client1 and client 2 suggests that server 2003 requires additional configuration to allow its local system account to access an SMB share by alias.
this problem prevents group policy features (such as software installation) from an aliased file server.

Getting 'access is denied' error when access Flight Example sample gateway service

Hi All, Greetings! I am new to SAPUI5. I am getting 'Access is denied' when trying to load data from the sample gateway service (Flight Example). Please help.
Here's the entire code:
view1.view.js
sap.ui.jsview("ui5_proj09_flightdemo.view1", {
      getControllerName : function() {
         return "ui5_proj09_flightdemo.view1";
      createContent : function(oController) {
     var serviceURL = "https://sapes1.sapdevcenter.com/sap/opu/odata/IWFND/RMTSAMPLEFLIGHT/";
     var readRequestURL = "/FlightCollection(carrid='AA',connid='0017',fldate=datetime'2013-05-01T00:00:00')/?$format=xml";
       var loginoDataModel = new sap.ui.model.odata.ODataModel(serviceURL, true, "my_sapes1_userid", "my_sapes1_pwd");
       alert("Before Service Call");
       loginoDataModel.read(readRequestURL, null, null, false,
                   function(oData, oResponse) {
                  alert("Success");
                         var result = oData.results;
                         alert(result.length);
                         if(result.length > 0){
                             webmodel.setData({modelData: result});
                             table.bindRows("/modelData");
                   function(oError){
                         alert("Error::"+oError.message); //getting 'access is denied' error message popup at this line
       alert("After Service Call");
          var oTable = new sap.ui.table.Table( {
id : "oTableid", // sap.ui.core.ID
width : "auto", // sap.ui.core.CSSSize
rowHeight : undefined, // int
columnHeaderHeight : undefined, // int
columnHeaderVisible : true, // boolean
visibleRowCount : 10, // int
firstVisibleRow : 0, // int
selectionMode : sap.ui.table.SelectionMode.Single // sap.ui.table.SelectionMode
//Define the columns and the control templates to be used
var oColumn = new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "City From"}),
template: new sap.ui.commons.TextField().bindValue("cityFrom"),
sortProperty: "lastName",
filterProperty: "lastName",
width: "200px"
oTable.addColumn(oColumn);
var oColumn2 = new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "City To"}),
template: new sap.ui.commons.TextView().bindProperty("text", "cityTo"),
sortProperty: "firstName",
filterProperty: "firstName",
width: "200px"
oTable.addColumn(oColumn2);
// oTable.bindRows("/modelData");
oTable.placeAt("content");
index.html
<!DOCTYPE HTML>
<html>
       <head>
              <meta http-equiv="X-UA-Compatible" content="IE=edge">
     <script src="resources/sap-ui-core.js"
                      id="sap-ui-bootstrap"
                      data-sap-ui-libs="sap.ui.commons,sap.ui.table,sap.ui.core"
                      data-sap-ui-theme="sap_goldreflection" >
              </script>
              
     <script>
          sap.ui.localResources("ui5_proj09_flightdemo");
                     var view = sap.ui.view({id:"idview11", viewName:"ui5_proj09_flightdemo.view1", type:sap.ui.core.mvc.ViewType.JS});
            view.placeAt("content");
     </script>
       </head>
       <body class="sapUiBody" role="application">
              <div id="content"></div>
       </body>
</html>
Regards,
Sai

Hi Sai,
You can refer my blog How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
Please go though it and see if it helps you to resolve this issue.
Regards,
Chandra

Error Message when logging on "The Group Policy Client service failed the logon. Access is denied"

Since the move to Windows 7 we have started getting this error above when people login at random times and on random machines, at first we thought it was only a select few users, but now it seems to have occurred to about 20 different Staff members working
at the school. Also of those 20 odd users it has happened to them on a few occasions.
What we know
We know this problem is only occurring to staff with Roaming Profiles, it seems like somehow the profile is not Synchronizing with the Servers File Share that houses the profiles, which causes the NTUSER.DAT file to become corrupt and go from being around
2 – 3 MBs to 256KB (In all cases where a user has had this issue there NTUSER.DAT file has been 256KB)
Current Resolution to the problem
When a staff member contact us with this problem, we fortunately have Previous Versions working on the profiles folder on the server, so we are able to restore their NTUSER.DAT file from 1 to 2 days before it became corrupt, which then seems to allow them
to log on fine
What we have tried so far & suggested so far
After some research on Google, we found the following thread on EduGeek
http://www.edugeek.net/forums/windows-7/78733-windows-7-user-profile-failed-error-again.html#post700415
Which suggested that the problem may lay within registry, so we implemented the Script that was posted on the website, however this has not seemed to make any difference
In the early stages when only 5 – 10 staff seemed to be having the problem, we believed the issue could be with just certain AD accounts. It had not seemed to happen to any recently created AD accounts so we thought it could be a corrupt attribute on
the user so we delete one of the staff AD accounts that had the problem and creating a brand new one, however within about 2 – 3 weeks that staff member had the issue occur again
Leading on from point two, we also thought the problem could be with people using multiple computers, logging on in 2 places and not logging off properly, but unfortunately the staff member referred to in point 2 only uses the one computer in reception.
Another potential cause that we figured might be the route of the problem, was it could be specific computers that are not communicating properly with the server, which could be causing this problem to occur, but we have no real way of testing this,
as the staff generally log onto 3 – 4 different computers throughout the day and in different location
We log a call with EE and they just pointed us to various websites that we had already checked and wasn’t much help.
In Summary
This error has now occurred with about 20 members of staff, we currently only use Windows 7 at our Senior School & Moving to Windows 7 at our Prep School in the Summer
holidays, we would like to find out the route of this problem ideally before then, as we could potentially be doubling the amount of staff with the problem after the move. Has anyone else seen this problem or have a brain wave on how to solve it?
Regards
Andy

Hi Dudleya,
First of all ,I would suggest to check the permissions of the NTUSER.DAT registry hive .Here is a link for reference :
The Group Policy Client service failed the logon. Access is denied(Juke Chou`s answer)
https://social.technet.microsoft.com/Forums/windows/en-US/8c0054a3-35be-4fc4-839c-e2176613eb23/the-group-policy-client-service-failed-the-logon-access-is-denied?forum=w7itpronetworking
Please refer to this link and add the registry keys to have a check .Please backup the registry keys before you made modifications to them.
The Group Policy Client Service Failed The Logon In Windows 8(It should also work on windows 7 )
http://www.thewindowsclub.com/fix-group-policy-client-service-failed-logon-windows-8
If the issue persists ,we can refer to this link to troubleshoot this issue .
Troubleshoot User Profiles with Events(It should also be applied to windows 7 )
https://technet.microsoft.com/en-us/library/jj649075.aspx
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards

Why do I get FTP error messages uploading pages made with DW templates?

In selecting FTP access to my host, I've encountered FTP error messages on a Web site uploads that I have used templates to build pages while uploading another Web site not made with templates I have no problem uploading elements using FTP access. Can anyone help me figure out why. I'm on a MacBook Pro using DW CS4 with OS Mavericks. Thanks for your help.

Templates shouldn't make any difference what-so-ever, the output file is still just html whether you use templates or not.
Are both sites with the same hosting company? On the exact same server?
It's much more likely that you have some setting goofed than anything to do with the actual pages.
Check things like Use Passive FTP and Use FTP Performance Optimization (toggle the check boxes) under the More Options section of the Basic tab in your Site Settings.
Also verify all of your site credentials are correct. A missing or incomplete server Root Directory would be a good reason uploading fails.

Error message: "Logging into the account failed because an error occurred."

Hello,
We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
"Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
Any help will be greatly appreciated.
Best regards,
Alain Chammas
A user trying to access his account from a PC (wired) has no problems.

A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
Derndest thing I ever saw.

Message processing failed, FTP Receiver Adapter error...

Hello all,
We have a Idoc to File(FTP) scenario using PI.
When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
Any Idea why?
Thanks in advance.

Hi ,
There are two things that you can do
1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
2- in your adpater change the connection mode from Per file transfer to "Permanent".
Please feel free to reply on this thread if you are not able to.
Thanks

**Creating default directory in failed: \logging.properties (Access is denied)**

Hello Experts,
i am deploying edq on weblogic.
After deployment, when lauching the edq url getting below error on firefox.
**Creating default directory in failed: \logging.properties (Access is denied)**
by default, it took the path as:
C:\oraclesw\oracle\middleware\user_projects\domains\oedq_dev_domain\servers\edqdev_server1\tmp\_WL_user\dndirector\1i3bzo\war\WEB-INF\config
i have unzipped the config.zip into above mentioned config folder.

When we restart the application server up and start the managed server, the deployment is in the failed status with the following message:
We have the Memory settings on the managed server set as : -Xmx5024M –XX:MaxPermSize=256M
<Jul 11, 2013 4:45:13 PM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating start task for application 'dndirector'.>
<Jul 11, 2013 4:45:13 PM EDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
        at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
        at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
        at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
        Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: com.datanomic.utils.transport.TransportSignature
        at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
        Truncated. see log file for complete stacktrace
>
<Jul 11, 2013 4:49:42 PM EDT> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3Ddndirector%2CType%3DAppDeployment%22%29.>

Error: "DoFunction fork failed" in the Messaging Server 3.x logs on Digital Unix or AIX

Receiving error message DoFunction fork failed in the Messaging Server 3.x logs
on Digital Unix or AIX.
<P>
The dxkerneltuner command is one way to raise the number of user
processes on Digital Unix. Steps follow:
<OL>
<LI>Login as root (or su to root) on Digital Unix and execute the
dxkerneltuner command.
<P>An X-Windows window will pop up with a list of
kernel subsystems (tuning categories).
<P>
<LI>Double-click the "proc" subsystem.
<P>
A child window will pop up, displaying parameters in that category, along with
their associated values and limits. These should include parameters
named "max-proc-per-user" and "max-threads-per-user", which are by default,
64 and 267 respectively.
<P>
These should be replaced by values more
consistent with the Messaging Servers resource requirements. Provided
the default Messaging Server installation is used, more appropriate values
for these parameters would be 640 and 2560 respectively.
<P>
<LI>To implement
these new values, replace the value 64 with 640 for max-proc-per-user in the
child window and replace the value 267 with 2560 for max-thread-per-user.
<LI>Click OK on the child window and exit the parent window.
<LI>Reboot Digital Unix to implement the kernel changes.

I have bkp OD, trash server.app / reboot / install server.app again and working fine now.
Thanks !

Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.com

Hi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support

Templates fails to upload

I am getting an error while uploading a template.
In the message console I am getting this error
Job Construction Phase
begin()
Appended operation 'Import Virtual Machine Template' to object 'cfgFile_0004fb00001400005c33cf92650cd43f'.
Appended operation 'Virtual Machine Cfg File Configure' to object 'cfgFile_0004fb00001400005c33cf92650cd43f'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (CREATED): [VirtualMachineTemplate] 0004fb00001400005c33cf92650cd43f (E1_DB.tgz)
Object (CREATED): [VirtualMachineCfgFile] cfgFile_0004fb00001400005c33cf92650cd43f
Operation: Import Virtual Machine Template
Operation: Virtual Machine Cfg File Configure
Job Running Phase at 07:20 on Wed, Feb 8, 2012
Job Participants: [34:30:33:34:31:33:55:53:45:36:32:33:4e:36:4e:36 (dnptovm200)]
Actioner
Starting operation 'Import Virtual Machine Template' on object 'cfgFile_0004fb00001400005c33cf92650cd43f'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.JobFailureException: OVMAPI_5001E Job "1328710821448" Failed due to failure "(02/08/2012 08:01:45:873 AM)
Async operation failed on server: dnptovm200.
Object: cfgFile_0004fb00001400005c33cf92650cd43f,
PID: 25479,
Server error message: Template import error: No VM configure file found.
" on server "34:30:33:34:31:33:55:53:45:36:32:33:4e:36:4e:36" associated with object "cfgFile_0004fb00001400005c33cf92650cd43f"
Wed Feb 08 08:01:46 MST 2012
at com.oracle.ovm.mgr.api.job.JobEngine.checkJobStatus(JobEngine.java:602)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:580)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:564)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineTemplateImport.action(VirtualMachineTemplateImport.java:68)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:193)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1090)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
FailedOperationCleanup
Starting failed operation 'Import Virtual Machine Template' cleanup on object 'cfgFile_0004fb00001400005c33cf92650cd43f'
Complete rollback operation 'Import Virtual Machine Template' completed with direction=cfgFile_0004fb00001400005c33cf92650cd43f
Rollbacker
Objects To Be Rolled Back
Object (CREATED): [VirtualMachineTemplate] 0004fb00001400005c33cf92650cd43f (E1_DB.tgz)
Object (CREATED): [VirtualMachineCfgFile] cfgFile_0004fb00001400005c33cf92650cd43f
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=5391 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setName accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setFoundryContext accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=onPersistableCreate accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setLifecycleState accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setRollbackLifecycleState accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setName accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setFoundryContext accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=onPersistableCreate accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setLifecycleState accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setRollbackLifecycleState accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setJobAsset accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setVirtualMachineCfgFile accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setVirtualMachine accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=importVirtualMachineTemplate accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setSimpleName accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setAsset accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=configure accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setOrigin accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=setDescription accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=setAsset accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=configure accessLevel=6
Class=InternalJobDbImpl vessel_id=5391 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=5391 method=setAssociatedHandles accessLevel=6
Class=InternalJobDbImpl vessel_id=5391 method=setFailedOperation accessLevel=6
Class=VirtualMachineTemplateDbImpl vessel_id=5409 method=nextJobOperation accessLevel=6
Class=VirtualMachineCfgFileDbImpl vessel_id=5414 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
I then went and check the ovs-agent.log and found this:
[2012-02-08 07:51:20 6926] DEBUG (OVSNotificationServer:138) Sending notification: {ASYNC_PROC} progress PID 25479
[2012-02-08 07:51:41 25479] DEBUG (OVSAsyncProc:192) async_proc_prog: notification {ASYNC_PROC} progress PID 25479 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 11713453161L, 'CURRENT_BYTES': 11587552675L, 'OPERATION': 'download'}
[2012-02-08 07:51:41 25479] DEBUG (OVSNotificationProxy:45) Notification sent: {ASYNC_PROC} progress PID 25479
[2012-02-08 07:51:41 6926] DEBUG (OVSNotificationServer:138) Sending notification: {ASYNC_PROC} progress PID 25479
[2012-02-08 07:52:03 25479] DEBUG (OVSAsyncProc:192) async_proc_prog: notification {ASYNC_PROC} progress PID 25479 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 11713453161L, 'CURRENT_BYTES': 11685037467L, 'OPERATION': 'download'}
[2012-02-08 07:52:03 25479] DEBUG (OVSNotificationProxy:45) Notification sent: {ASYNC_PROC} progress PID 25479
[2012-02-08 07:52:03 6926] DEBUG (OVSNotificationServer:138) Sending notification: {ASYNC_PROC} progress PID 25479
[2012-02-08 07:52:16 25479] DEBUG (OVSAsyncProc:192) async_proc_prog: notification {ASYNC_PROC} progress PID 25479 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 11713453161L, 'CURRENT_BYTES': 11713453161L, 'OPERATION': 'download'}
[2012-02-08 07:52:16 25479] DEBUG (OVSNotificationProxy:45) Notification sent: {ASYNC_PROC} progress PID 25479
[2012-02-08 07:52:16 6926] DEBUG (OVSNotificationServer:138) Sending notification: {ASYNC_PROC} progress PID 25479
*[2012-02-08 07:52:20 25479] DEBUG (OVSAsyncProc:104) ovs_async_proc: pid 25479 status 1 output Template import error: No VM configure file found.
[2012-02-08 07:52:20 25479] DEBUG (OVSNotificationProxy:45) Notification sent: {ASYNC_PROC} exit PID 25479
[2012-02-08 07:52:20 6926] DEBUG (OVSNotificationServer:138) Sending notification: {ASYNC_PROC} exit PID 25479
The template comes from a OVM 2 version where it contains
[root@dendell08 E1_DB_898.4.1_11GR2_X86_64]# ls -lrt
total 79221520
-rwxrwxrwx 1 root root 13316728320 Nov 23 2010 system.img
-rwxrwxrwx 1 root root 350 Jan 11 2011 vm.cfg
-rwxrwxrwx 1 root root 78643200000 Jan 11 2011 E1_DB.img
[root@dendell08 E1_DB_898.4.1_11GR2_X86_64]#
The vm.cfg file contains the following:
# Automatically generated xen config file
name = "orclvmdb"
memory = "4096"
disk = [ 'file:/OVS/running_pool/orclvmdb/system.img,hda,w',
'file:/OVS/running_pool/orclvmdb/E1_DB.img,hdb,w', ]
vif = [ '', ]
bootloader="/usr/bin/pygrub"
vcpus=4
vfb = [ 'type=vnc,vncunused=1,vnclisten=0.0.0.0' ]
on_reboot = 'restart'
on_crash = 'restart'
Is there something wrong with the vm.cfg?

The images I am trying to upload are the following size:
system.img 12.6 Gigabytes
DBase.img 73.2 Gigabytes
The repository has 98 Gigabytes of available space.
When I tried loading as one tgz file I got errors of
*[2012-02-08 07:52:20 25479] DEBUG (OVSAsyncProc:104) ovs_async_proc: pid 25479 status 1 output Template import error: No VM configure file found.
When I tried uploading as seperate files in the upload menu I am pretty sure I ran out of space and got the error:
[2012-02-09 07:43:53 20641] DEBUG (OVSAsyncProc:104) ovs_async_proc: pid 20641 status 1 output Template import error: [Errno 14] curl#23 - "Failed writing body"
Pretty sure this is due to running out of space.
Worked through the issues with deleting other images files to free up more space in the respository. Tried again and am nowing getting the following error:
(02/16/2012 03:00:21:237 PM) Async operation failed on server: dnptovm200. Object: cfgFile_0004fb0000140000dda73e3bb2a9dfec, PID: 21608, Server error message: Template import error: Cannot find disk file: system.img
If I change the order of the upload I get the same error.
Could this still be a space issue? Can't add anymore space to repository.
This isn't an issue when trying to clone the images it happens when uploading. However, I am concerned that when I do get thsi uploaded I won't have enought space to create a clone of this image to run.
Does anyone have any ideas or comments?
Edited by: JRL on Feb 17, 2012 9:41 AM

Curl: (25) Failed FTP upload: messages.log: Access is denied

Similar Messages

Maybe you are looking for