Message processing failed, FTP Receiver Adapter error...

Hello all,
We have a Idoc to File(FTP) scenario using PI.
When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
Any Idea why?
Thanks in advance.

Hi ,
There are two things that you can do
1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
2- in your adpater change the connection mode from Per file transfer to "Permanent".
Please feel free to reply on this thread if you are not able to.
Thanks

Similar Messages

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Message processing failed if we receive attachments via E-Mail

Dear ladies and gentlemen,
we have follow proccess:
We get some e-mails with an attachment. The E-Mail pick up the messages and send it to an RFC Channel.
I changed the payload via the localejbs/AF_Modules/PayloadSwapBean :
localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean TRANSFORM
and the module configuration looks follow:
TRANSFORM swap.keyName payload-name
TRANSOFRM swap.keyValue MailAttachment-1
it looks good and the payload would be swapped okay, and the mapping is also okay.
But if we push the message to the RFC Adapter I get follow error message back:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
So now my question: If is possible, that the adapter try to send also the Body of this E-Mail to the target system ? Because the
Message ID is the ID from the payload of the E-Mail Body.
It is possible to keep away the E-Mail Body from the payload?
Because we need only the attachment. Or if I I have to setup via Bean anything in the RFC Adapter ?
Thanks
Kind reagards
Stephan Kohler
P.S. The PI System is an PI 7.1, the target system would be an R/3 4.6. I haven't any success with the RFC Adatper version 7.10 or 6.40

> Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
>
Is your attachment an XML? Is this XML structure is same as what you mapping source is? If that is the case, it should be okay. Is this interface working for non-mail sender? You might want to re-import the RFC structure in to PI again.
VJ

TS3694 hello out there ! am trying to restore my ios, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down f

hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we

mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Configuring a Seeburger FTP Receiver Adapter

Hello,
I am trying to build a scenario where SAP ECC 6 sends an invoice to a customer via EDI.
We are using ECC 6.0 and PI 7.0 and the Generic Seeburger EDI Adapters. The VAN is a GEIS EDISWITCH VAN (Eircom in Ireland).
I am able to successfully send an IDoc from ECC 6 and into PI where a Seeburger map converts the message to EDI-XML format. I can use a file adapter to create a file in normal EDI format. But I can't get the Seeburger FTP adapter to work with the VAN.
I have configured the correct IP, port, username and password but I keep getting the following message when the communication channel tries to send the message:
<h6>Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionSoftProcessingError: Unexpected reply: 501-Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). >> </h6>
The FTP session is expecting a PUT command with the recipient id and APRF as parameters but these are not getting passed. I suspect this is because I am not passing the correct variables to the receiver adapter but I don't know what variables it expects and where they should be specified. And I can't find the answers in the documentation.
Can anyone shed some light on what I need to do?
Thanks,
Ben

Hi Prateek,
Thanks for your comments. The channel is set to GEIS(GeMarkIII). There is nowhere to specify a directory or filename. The settings I have used are as follows:
Adapter Type: FTP (http://seeburger.com/xi)
Receiver
Transport Protocol: FTP
Message Protocol: GEIS/GeMarkIII
Adapter Engine: Integration Server
Host name: <IP address of VAN server>
port: 21
User Id: <Our mailbox number>
Password: <Correct password>
Host path/VAN Partner ID: <blank>
Script file: <blank>
Transfer type: ASCII
Connection mode: Passive
Use keep alive: <Not checked>
Security Mode: None
Proxy Mode: none
Resource ID: <blank>
Deliver transmission report: <not checked>
Payload mode: Attachment
Attachment ID: SeeburgerMain
Channel status: Active
Use dynamic attributes: <Checked>
Use non-empty attributes: <Checked>
Request displayed report: <Not checked>
Request dispatched report: <Not checked>
Report timeout (minutes): 720
Handle received reports: Refer reports to XI system
There is nowhere in the communication channel configuration that allows me to specify the receiver ID or the APRF. The documentation say this is read from the EDI data and the relevant fields are populated.
Any ideas?
Thanks,
Ben

File Receiver Adapter Error

I'm using Variable substitution for the Directory I determine dynamically using UDF. I'm gettig following error. Would someone clarify how to wrok around this error.
2006-09-28 14:43:38 EDT: Message processing failed: Error during variable substitution: java.text.ParseException: Security violation encountered during variable substitution: Content of variable var2 is not safe: /sales/temp

Doss,
for Directory I was using variable substitution.
for example %var2% and then Var1 Iam getting from the Payload ( Iam populating the payload from UDF ).
When I checked 'disable security checks' on the receiver adapter screen, I'm not getting this error anymore.
Message was edited by: Ram Krish

FTP receiver adapter does not transfer (STORE) file

Hello gurus,
In my scenario I want to transfer files from server X to server Y using FTP.
To get the files from server-X I use the FTP sender adapter, to put the files on server-Y I user the FTP receiver adapter.
Getting the file (QoS = EOIO) is not a problem; I see the result is SXM_MONI.
Putting the file doesn't seem to work; I don't have an error message in SXMB_MONI but the file is not physical stored on server-Y.
When I monitor server-Y I see that XI connects with the configured user/pwd and even creates the directory when it doesn't exist but the file is not STORED.
I'm not using the BPE, this is a very simple and basic scenario: what comes in, goes out.
Can you please advice what might be the cause of the strange behavior?
Many thanks - Danny

Hello Michal, thanks for your (very) quick reply.
this is the result:
1) adapter monitoring
<b>Status to be delivered:</b>
- Message successfully received by messaging system. Profile: XI URL: http://xdsci.cie.etat.lu:53100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
- Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
2) sxmb_moni
- no error
3) communication channel monitor
- Message successfully received by messaging system. Profile: XI URL: http://xdsci.cie.etat.lu:53100/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
- Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
- The message was successfully retrieved from the receive queue.
- The message status set to DLNG.
- Delivering to channel: FTP_receiver
- MP: entering
- MP: processing local module localejbs/CallSapAdapter
- File adapter receiver: processing started; QoS required: ExactlyOnce
- File adapter receiver channel FTP_receiver: start processing: party " ", service "xyz"
Any idea?

JDBC Receiver Adapter Error

Hi All,
I am executing SP by using JDBC Receiver Adapter.
My strcture is follows
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<spName type="VARCHAR">SP_CREATE_T_BATCH</spName>
<IN_Control_Recipe hasQuot="No" type="Integer">100000000001723850</IN_Control_Recipe>
</SP_CREATE_T_BATCH>
</STATEMENT2>
The below error I am getting
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_CREATE_T_BATCH' (structure 'STATEMENT2'): java.lang.NumberFormatException: For input string: "100000000001723850"
Any help on this

Hi Ram,
Since you mentioned that your SP has one input parameter and one output parameter, the structure of the XML message at the JDBC receiver side should be:
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<IN_Control_Recipe isInput="true" hasQuot="No" type="BIGINT">100000000001723850</IN_Control_Recipe>
<Output_Parameter isOutput="true" type="SQLDataType"></Output_Parameter>
</SP_CREATE_T_BATCH>
</STATEMENT2>
Here, i have assumed the following:
SP_CREATE_T_BATCH - The name of the Stored Procedure to be executed
IN_Control_Recipe - Input parameter of the SP and its SQLDataType is BIGINT as suggested by Stefan.
Output_Parameter - Output parameter of the SP. You may enter the SQL data type as per the output of your Stored Procedure.
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).
Hope this will surely solve your problem.
Regards, Gaurav.

Error in JMS receiver adapter: "Error creating initial context with environment"

Hello,
I have some trouble with a JMS receiver adapter (access to JMS-provider with JNDI).
The message in adapter monitoring is:
A channel error occurred. Detailed error (if any) :
com.sap.aii.adapter.jms.api.connector.ConnectorException: Fatal Error looking up connection factoryJMSQueueConnectionFactory, for profile: ConnectionProfile of channel: CC_JMS_RCV_XLIMI00001on node: 503473150 having object id: 5b424f2f79b6350ca636ab35d528cfdd:
ConnectorException: Error creating initial context with environment: java.naming.provider.url=wcsefdev.example.com:9064; java.naming.factory.initial=com.ibm.websphere.naming.WsnInitialContextFactory; for profile: ConnectionProfile of channel:
CC_JMS_RCV_XLIMI00001on node: 503473150 having object id: 5b424f2f79b6350ca636ab35d528cfdd: javax.naming.NoInitialContextException:
Cannot instantiate class: com.ibm.websphere.naming.WsnInitialContextFactory<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory
(JndiConnectorImpl.java:152)<br> ....
Message processing failed. Cause:
com.sap.aii.adapter.jms.core.fsm.DFA$InvalidTransitionException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_XLIMI00001:5b424f2f79b6350ca636ab35d528cfdd
The third party assured me that the specified JNDI parameters are right and everything is configured on their site, so it should work...
Might there be a problem with the JMS drivers?
Regards,
Marcus

Hi Marcus,
Have a look at below thread
Connecting to PI 7.11 JMS Queue from other PI 7.11 Server

Filename from payload - FTP receiver adapter

Hello everyone!
I have a scenario wherein I need to get the value from a field coming from an IDOC and then give that value as the "filename" of the file that is saved in the FTP folder.
IDOC > XI > FILE
For example, if /ORDERS05/IDOC/E1EDK02/BELNR = 620000123
then I want the name of the file to be saved in the FTP folder to be 620000123.xml
I understand you may use the 'variable substitution' property in the FTP receiver adapter, but subsequent attempts at trying to configure that property have resulted in errors. Can anyone help me out?
Warm regards,
Glenn

do u have recordset name (root message)
For Ex: If you want to refer to the field which is bold
below is your variable substuition:
payload:root,1,e1,1,e2,2
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
     <e1>
        <e2>Data_1</e2>
        <f/>
       <g attr="abc">text</g>
        <e2>Data_2</e2>
     </e1>
</dummy>
<e1>
     <e2>illegal/value</e2>
     <f/>
     <g attr="abc">text</g>
     <e2 attr="fghij">Example Value</e2>
   </e1>
</root>
Similarly
for your strucutre:
<MS_MT>
<order>
      <number>
the variable substuition would be
payload:MS_MT,1,order,1,number,1
you have to give complete XML to arrive to this value.

Message processing failed in XML parser

This is IDoc to file integration. When I test (WE19), I did not put any value in the 'Quantity' field (which is 6 characters long).In the message mapping I put a condition to see if the value is empty then put zero, and it did not give any error. I have given all the fixed field lengths in the file adapter but still getting the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)'

When I enter value in the 'Quantity' field, the integration works fine. The value 'tablero de control' is the 'Description' which is the next field. My Content Conversion is like;
Field1, Field2, Quantity, Description
(where Field1 and Field2 are mandatory and Quantity and Description are optional)
When I provide all 4 values, the integration work just fine, when I do not provide 'Quantity' it fails.

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableExcep

Hi,
I am generating IDoc for infotype 2006 through creating Change pointers using the Function Module 'CHANGE_POINTERS_CREATE_DIRECT'.
The problem is the Idoc is not reaching the receiver system. It is showing the below error message when i checked it in RWB Communication Channel Monitoring,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): com.microsoft.sqlserver.jdbc.SQLServerException: Warning: Fatal error 7987 occurred at Dec 17 2009 1:43PM( $ . Note the error and time, and contact your system administrator.
The scenario is Sender: Idoc and Receiver : JDBC adapters.
Please let me know how to solve this issue.
Thanks,
Sri

Hi,
From the error message: "Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): ". I think:
(a) If there is any data type mismatch like a character field from PI is trying to post into a date or numeric field in the stored procedure. You need to check if the data type of the fields in PI and the stored procedure are same?
(b) If there is any structure mismatch when the XML is created by BADI like any mandatory fields are missing.
Thanks,
Manohar Dubbaka

HTTP (Axis) Receiver Adapter error: The security context token is expired or is not valid

Hi Experts,
We are required to send a message through PI 7.31 (single stack) in a Soap-to-Soap scenario connecting to a Soap 1.2 Web Service.
We are getting a Security Context Token expired or Invalid error.
Please help us resolving this error.
Thanks in advance!
The Channel Configurations are as follows:
Processing sequence:
Module configurations:
1.
2.
3.
4.
Best Regards
Vikram

Hi all !
First of all, thanks for your answers..
Stefan Grube:
Itu2019s not a Adapter Module.
The module tab following configuration
Processing Sequence:
AF_Adapters/axis/AFAdapterBean     Local Enterprise Bean     afreq
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     xireq
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     trp
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     dcres
AF_Adapters/axis/HandlerBean                     Local Enterprise Bean     xires
AF_Adapters/axis/AFAdapterBean     Local Enterprise Bean     afres
Module Configuration
xireq          handler.type     java:com.sap.aii.axis.xi.XI30OutboundHandler
trp          handler.type     java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp          module.pivot     true
xires          handler.type     java:com.sap.aii.axis.xi.XI30OutboundHandler
How can i know if those values are correct ?
Srinivas Reddy:
Thanks for the documentation
I have applied SAP Note 11016021 and the error changed, now it says:
Axis: fatal error in invocation: java.lang.NoSuchMethodError: com/sap/aii/axis/xi/XIUtils.setOperation(Ljava/lang/String;Lorg/apache/axis/MessageContext;)V
Message processing failed. Cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Edited by: Antonio Guzman on Jul 9, 2008 5:29 PM

FTP Receiver Adapter.

Hi All,
From XI I need to FTP file to outer system using
FTP Receiver Adapter
Now due to security reason my client wants to use FTPS
I checked in FTP Receiver Adapter -- there is an option
Connection Security -- FTPS (FTP Using SSL/TLS) for Control Connection.
Can I select this option and use like simple FTP Receiver Adapter?
Please tell the process/docs for it.
Regards
<Moderator note: Subject edited. Please do not use 'Urgent'. See the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further info.>
Edited by: Mike Pokraka on Jul 25, 2008 8:47 AM

Hi,
check some links on FTPS.
FTPS Sender and FTPS Receiver adapter. Pls help
SFTP vs. FTPS in SAP PI
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
Regards,
Phani

Message processing failed, FTP Receiver Adapter error...

Similar Messages

Maybe you are looking for