Currency conversion with variable in selection mask with problems

Hi Gurus,
I want to implement a currency conversion as follows:
when the query is opened a selection screen should appear and the whole data which is with Euro currency should be possible to translate in USD, GBP, FRF (depends on which currency the user is choosing).
I did a conversion with a variable with default value USD but I am not able to insert multiple currencies like GBP and FRF as default value/ suggestion in variable.
I created a variable on 0Currency with following adjustments:
- Processing By: Manual Input/Default Value.
- Reference Characteristic (0CURRENCY) Currency.
- Variable Represents: Single Value.
- Ready for input: checked
- default value: USD.
With adjustment "variable represents" > "single value" it is not possible to insert two or three currencies as default value.
When changing "variable represents" to "multiple single values" or to "selection option" it is possible to insert two or three currencies as default value.
But when the variable is saved with "multiple single values" or "selection option" the variable doesn´t appear in currency translation type in tab currency when selecting target currency with option "target currency from variable".
Any idea why the variable doesn´t appear with adjustments with "multiple single values" or "selection option"?
Or any idea how it is possible to achieve my whished currency conversion?
Thanks in advance!

Charlie Belt wrote:
saplaz-
> If I read your request properly, you would like to be able to translate values to any one currency at a time, from a possible list of currency. Remove the default value and whatever currencies are available in your RSCURR should be there.
That´s correct. I want to have a list of currencies in which it would be possible to translate. That means clicking in selection mask and the list appears.
That was my first thougth ... removing the default value. I removed the default value but only Euro (EUR) appeared in that list for selecting. I thought this has maybe something to do with the data which is available in the cube and that is only in EUR.
I will check the RSCURR and what kind of currencies are available.
cheers

Similar Messages

Anonymous Block with Variable and SELECT

Hi Guys,
I am struggling to connect the material I am learning. I read about anonymous blocks and variables so I want to write a
nice and neat select with all the fancy stuff (variables, exceptions) to get it right and to it as I read in the book.
DECLARE
MYSTRING VARCHAR(10);
MYSTIRNG := 'X';
BEGIN
SELECT * FROM DUAL WHERE DUMMY = MYSTRING
END;
but....this causes one error after the other. Am I getting the concept wrong here or is it a syntax error?

cant I just get the result without using variable to store the result in the first place???Perhaps you're better off using a REF CURSOR (a.k.a. cursor variable).
That way you'll pass a resultset to the caller and you don't need any variables to select into.
You can read about them here:
http://www.oracle-base.com/articles/misc/UsingRefCursorsToReturnRecordsets.php
Re: PL/SQL 101 : Understanding Ref Cursors
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10766/tdddg_subprograms.htm#TDDDG99939

Button URL With Variables widget that works with HTML5

Hello,
I'm currently using the "Button URL With Variables widget 6.x" developed by CaptivateDev. com. Unfortunatley it is not compatible with HTML5 projects in Captivate 7. Do you know where I can find one?
Thanks,
Stewart

I don't know yet about any widget available for HTML5 output, with the exception of the interactions included with Captivate.

A query with "insert..select" run with dqp?

I would like to know if a query with "insert cluase select clause" is operated with the function of the dqp.
I think that a query portion with "select clause" is possible to run with dqp.
if anybody knows about this case, please let me know.
Thanks in advance,
Dokon Kim

There is no such thing as pl/sql 5.1.4, at that time pl/sql didn't even exist.
You also state it works in Sql*plus but it doesn't work in PL/SQL as PL/SQL is using OCI7. Which isn't true.
Please stop playing games and withhelding information.
Post the real info. Not what you think is important.
Why are you using a (desupported) 9.0.1 client against a 10GR2 database?}
Sybrand Bakker
Senior Oracle DBA

PS CS5 - Working with Variables | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of The Complete Picture, Julieanne demonstrates the incredible power of Variables in Photoshop. Learn how to cut hours of time out of your production time when you need to combine text and photographs. Although this feature has been in Photoshop for many releases, only a small number of customers know if it’s immense power for tasks such as automating event photography, creating web banners and graphics.
http://adobe.ly/A1tzfO

Struggling with my .png's in variables. They are sizing up against the previous dataset and shrink. By the 5th or 6th in my set of datasets, I'm working with a tiny version - very lo-res. Jpg's are no problem as are .png's that are a set size (i.e. 4x5). Only my cutout PNG's with transparency around them are an issue. Thoughts on how to keep the size from shrinking?
thank you

Query variable : selection option with no interval

Hello,
Is it possible to define a query variable as selection option, with no interval (like in abap).
I am in 3.X version.
Many Thanks in advance,
Manuel

Hi Manuel,
This should be possible through multiple single value variables, but to ensure that the user has not in input the same charateristic value for exclusion and selection you may choose to write customer exit at the background.
I think interval and select option would allow 'To values'.
So I was wrong in what I said before. SORRY
However multiple single value would not allow exclusion, I think.
Your scenario would only be possible by excluding multiple single values in variable type select option and process the variable using customer exit, to trmove all to Values.
But you are right, you cannot have your scenrio handled , I think.
( ie multiple exclusion in from values with no To Values )
One more way is restrict your characteristic by two input ready variables, one select option for exclusion and have a customer exit to delte all inclusion that were input accidently and one multiple value ready for input variable.
But, all in all, there would be no straight drive through this I think.
Hope it helps,
Regards,
Sunmit.

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

Currency conversion Type

Hi experts,
I created a currency conversion type in transaction RSCUR. My problem is I don't see this in BEx query designer. I used an existing one as template and experienced the same. Did I miss something or is it a system bug?
For your info we are running BI7 SP6
Regards
Aban
Edited by: Abolfazl Hassanzadeh on Feb 18, 2011 2:47 PM

Hello Vikas,
Please don't post the same question multiple times. You have alread posted the same question 3 times here.
Please see the other thread that you have posted for answers.
Thanks
Chandran

Currency conversion with query selection mask and InfoObject 0Curtype

Hi,
question to following scenario:
in the data source is an column with the currency type. This currency type column contains values like
10 = company code currency
20 = account area currency
So for each data set in the table is an assignment of currency types.
In the cube is an InfoObject called 0Curtype (for currency types 10,20,30 ...).
In the BEx Query should a filter or selection be possible before the whole data is displayed.
The user can select in which currency he wants to display the data. When he selects the 10 the whole data is displayed in different currencies which are available because its local currency (Euro, Dollar etc.). By selecting 20 the whole data is displayed in Euro.
Does anybody knows how to achieve that? Is there any function module availabe which is provided by SAP and it is available for use?
Thank you in advance!!!

Hi There:
You have two options available.
One you can define currency conversion variable in transaction RSCUR. Then use this currency conversion variable at query run time using a formula Key figure and go to Conversions tab and select this variable. Then at query run time the query will convert your key figure from source currency type to target currency type. But this can significantly impact your query run time because the query will calculate this at query run time.
The second option is to use a standard SAP function module CONVERT_TO_LOCAL_CURR in the back end and store this key figure in the back end during data load. This way the query will run faster for you. The difference is significant in my case.
Good luck.
Let me know if you need more information.
MP.

Currency conversion type with variable for target currency

Hi,
I use a currency conversion type with a bex variable for target currency in a query in order to convert a Key Figure. It works fine but instead of short text description there's the technical description of the variable in the selection screen. How can i change the description of the variable ?
For information, in the bex, we can't see the variable in "variable sequence". I use BI 7.0
François.

Hi,
The problem was that in the maintenance of the currency translation type the option Target Currency from Variable was checked. As a consequence in the properties of our key figure the drop-down-list Target Currency was set to from variable with no chance of changing it (it was grey).
What we can do was to choose the option Target Currency Selection with Translation instead of Target Currency from Variable. Now, in the properties of the key figure we can choose the variable in the dropdown-list Target Currency and tick the option Variable Entry. As a result, the variable shows up in the query properties and we can change its arrangement.
Regards,
Siva Patil.

Sorting Currency conversion Variables in Query Selection screen

Hi Experts,
I have an issue in sorting variables.
A Currency translation is used here which has two selection options here, one for "Currency" and one for "Currency conversion date". They just pop in somewhere in the selection screen with out order. I want to put them together either in the middle or at the bottom.
They are not visible in the Variable sequence tab of query properties.
I changed the text for each of them (Ex. "XCurrency"), so that it sorts alphabetically, but no difference.
Had anybody come accross this issue before.
regards
G Rai

Hi,
This seems strange that the variable does not show in the query properties. One thing I can suggest it to try changing the technical name/desciption of the variable if that changes the order.
Please update back the thread if that helps.

Currency Translation in Planning sequence with variable for target currency

Hello ,
i have a requirement, the cube contains multiple data in the Group Currency for multiple company codes. & I want to convert these amounts to another KF as local currency using planning sequence only (not using transformation, as the users want to do this when they require.)
For this, i defined a Aggr level , filter & Planning function with Currency translation selecting the source field as AMOUNT_GC & target field as AMOUNT_LC using the Currency Translation type ZCTGCLC.
The target currency is not know beforehand, as it depends on the company code of each records that comes in.
Hence, Currency translation type uses a Customer exit variable 'Z_R_0026' for target currency.
This is customer exit variable which searches the Master data table of the Company code & replies back with the local currency of that particular company code (derived value from the company code variable also in teh filter).
However, when i execute this planning sequence, it gives me an error saying, "no value found for variable 'Z_R_0026'
1. when edit the CMOD code, to return only say "EUR" the planning sequence runs fine.However when i use this select statement to fetch the corresponding value of the currency using the company code reference from the company code master data table, it gives the above error. it seems to be a problem with the select statement.
below is the code for that exit
when 'Z_R_0026'.
     data: l_curr type /BI0/OICURRENCY.
     IF i_step = 2.
       LOOP AT i_t_var_range INTO loc_var_range
                          WHERE vnam = 'Z_S_0003'. " Company Code Single
         CLEAR l_s_range.
    Filling Currency Key from Company Code
         select single currency
         from /bi0/pcomp_code
         into l_curr
         where comp_code = loc_var_range-low
         and objvers = 'A'.
         if sy-subrc = 0.
           l_s_range-low = l_curr.
         else.
           l_s_range-low      = 'ABC'.
         endif.
         l_s_range-opt      = 'EQ'.
         l_s_range-sign     = 'I'.
         APPEND l_s_range TO e_t_range.
         clear l_s_range.
         EXIT.
       ENDLOOP.
     ENDIF.
2. there is a option of using infoobject for target currency in the RSCUR itself, however, when i try to input the 0COMP_CODE for finding the attribute currency from this infoobject, it doesnt accept.
has anyone tried this earlier ?
Any help/suggestions , guys, pls?
Thanks
John

Hi Praveen ,
Thanks for that.
I have a Question.
If RSCUR were to only accept a Date InfoObject , it would be placed under a differnt heading.
The Tab is "Currrency" & the sub-Tab is "Target Currency"
so i guess, it should accept other infoObjects as well.
Moreover, the help on that InfoObject buttons says
"Specification of an InfoObject (Characteristic) in which a currency
attribute is stored in InfoObject maintenance. At runtime, the
associated currency attribute is determined using the characteristic
value and this is interpreted as source or target currency."
& i have already defined 0currency as a attribute of 0comp_code. so this should work ideally.
almost similiar CMOD code i have used for other too, but i dont know why only this one is getting struck.
any help, pls.
Thanks
John
Edited by: John Lewis on Apr 17, 2009 3:24 PM
Edited by: John Lewis on Apr 17, 2009 3:25 PM

Help needed with Include ZXRSRU01 in relation with currency conversions

I'm implementing how to paper: Use variable time references in currency conversions (BW 3.3). When implementing variable exit RSR00001 & write include ZXRSRU01 an issue pops up.
The relevant code is:
<i> DATA: l_s_var_range TYPE rrs0_s_var_range.
IF i_s_rkb1d-infocube EQ 'RHCURCON'.
    IF i_step = '3'.
      LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam EQ 'ZCURDAT'.
        ZCL_IM_CURRCONV=>currdate = l_s_var_range-low.
      ENDLOOP.
    ENDIF.
ENDIF.</i>
When implementing the following message pops up:
"l_s_var_range" has already been declared.
In another statement ' l_s_var_range ' is already used.
Any advice how to deal with this issue?
thanks in advance
tom

Hi,
somebody already declared that workarea (l_s_var_range), so you can directly use that without any declaration (data l_s_var_range type rsr0_.....). you can remove that statement and you can work.
   Otherwise if you want to use to declare your own workarea,
data ls_range (or any name) type rsr0_....
DATA: l_s_var_range TYPE rrs0_s_var_range. *** this statement you can remove since somebody declared the same.
****or use ur own work area name and use that work area within your code.
data ls_var_range type rrs0_s_var_range.
IF i_s_rkb1d-infocube EQ 'RHCURCON'.
IF i_step = '3'.
LOOP AT i_t_var_range INTO ls_var_range WHERE vnam EQ 'ZCURDAT'.
ZCL_IM_CURRCONV=>currdate = ls_var_range-low.
ENDLOOP.
ENDIF.
ENDIF.
rgrds,
v.sen.
Message was edited by:
        Senthilkumar Viswanathan
Message was edited by:
        Senthilkumar Viswanathan

Problem with currency translation and variable time ref. with 0FISCPER

Hello,
We have a problem with a currency conversion with a variable time reference (as iobject we use 0fiscper)
We created a currency conversion for several key fig:
Our settings:
Exchange rate Type: EURX
dynamic ex rate determination
Source cur from datarecord
Fixed Target Curr (EUR)
Variable time ref.: End of Period
Special Infoobject: 0fiscper
When we run the DTP we get the following error:
<i>Enter rate GBP / EUR rate type EURX for 00.00.0000 in the system settings.</i>
ending the DTP in a message type X.
In table TCURR and T009/T009B all necessary information is available.
After debugging the function module, it looks like the created date (created from the FISCPER) is set to 00.00.0000. This results in the error above.
Does anybody have experience with this error and more important know how to solve it?
We also have a 0FISCYEAR available but in the TCURR table al rates are defined per end of the month. When trying to use 0FISCYEAR as InfoObject in the variable time reference, a diffrent error occurs: Enter rate GBP / EUR rate type EURX for 01.01.1001 in the system settings. While the 0FISCPER is 2001001.
Is there a bug in the function module? (couldn't find a SAP note)
We are working with BI 7.0 and SP12
Best regards
Steven

Please can you give more detail on how you were able to resolve this issue? How did you add 0fiscper to the transformation? I am on BW 3.5, how do I fix this same issue on it? Please help, this is urgent.

RFUMSV00 currency conversion with plants abroad

I have plants abroad activated and wish to use execute the abap in the currency of the tax return by setting the nat. currency instead of local currency flag. My question is which currency exchange type does it use to execute this and which date does it use for the currency conversion. Is there an OSS or implemenation link which explains this
thanks for any help

Hello,
Please have a look at note 175141. The reporting of the tax advance
with RFUMSV00 is done in Local Currency. Amounts in Second or Third
Currency do not play a role. Also: The transaction currency and the
exchange rate are used during posting to determine the amounts in Local
Currency
Exceptions are when the 'Plants Abroad' configuration is used.
=> selection button 'National Currency Instead of Local Currency'.
Please review also notes 1055835 and 1026865 in case of
specific country.
Hope this helps,
regards
Ray

Currency conversion with variable in selection mask with problems

Similar Messages

Maybe you are looking for