Currency Display in Euro

Hi All,
I am using
Locale currentLocale = new Locale("ca", "ES", "EURO");
NumberFormat currencyFormat
= NumberFormat.getCurrencyInstancecurrentLocale);
currencyFormat.setMinimumFractionDigits(2);
currencyFormat.setMaximumFractionDigits(2);
currencyFormat.format(some floating price))
for euro currency as locale. But in the web pages it is displayed as
Subtotal: � 23,81
Price Per Set: � 1,04
Any help in this regard would be highly appreciated.
Thanks
Sathish
I expect it to print Euro currency symbol.

Hi Sathish,
first up, check that the font you are displaying the web page in by default is capable of displaying a Euro symbol. The Euro is about the newest glyph to hit fonts, and because of this there are Euro and sans-Euro versions of a lot of TrueType fonts. The same can also be said for a couple of the encodings you could encode your web pages in. Maybe one of those two will be the difference for you.
Hope that helps!
Martin Hughes

Similar Messages

Cost Estimate Currency Display

Hi,
When I run cost estimate with 2 different currency settings in the system, how do I permanently make the display to always show cost estimate in USD (controlling area currency ) and not EURO (company code currency)?

Hi,
See the help
http://help.sap.com/saphelp_47x200/helpdata/en/08/51430943b511d182b30000e829fbfe/frameset.htm
Regards
Kiran Sure

Credit memo request with currency conversion to EURO

I have a requirement in which i need to create a Credit Memo Request for the newly created sales organisation using the old billing document number created for old sales organisation.New sales org will have its currency changed to EURO.I referred to a FM named 'Pricing' where the currency conversion is done.
The requirement is to get the current price in EURO from the price list instead of currency conversion to EUR.The current price has to be extracted from new pricelist.
Your inputs in this regard is highly appreciated.

HI
    Am not on SAP system now, so will try to give you
info with what i can recollect.
   You can use FM: SD_SALESDOCUMENT_CREATE for creating
Credit Memo Request. Note that reference document and
reference type should be passed for identifying the
reference document as invoice. Please consider these as
initial inputs to explore on the same. Regarding the
pricing, it can be configured either at order type or
copy control to carry out new pricing so it can take
directly from condition records.
    Hope the above info can help you in exploring on the same.
Kind Regards
Eswar

FAGLB03 , line item for KRW currency display incorrect format

Hi Experts,
I'm in ECC5 and working in tcode FAGLB03 with account which has KRW(Korean Won) as hard currency.
During I drill down into document which posted in USD as Local currency and KRW in hard currency, Why hard currency display 77.77 instead of 7,777 KRW.Please advise ,How to solve?
PS. Another tcode e.g. FB03 , FBL3N can display properly.
Thank you.
Mitpracha.

Hi,
Check and implement note 941882.
Regards,
Eli

Currency display in a separate cell

Hi BI experts,
I have a question about currency display in BI reporting. In BI reporting, the currency amounts are shown with the amount and currency together in one cell, such as 500 EUR, etc. But my current request is to split this into two cells, so 500 is in one cell, and EUR in another cell. Does anyone know where can I configure to achieve this?
Points will be awarded for helpful replies. Thanks.

Bhanu Gupta wrote:>
> Hi Wayne,
>
> In your KF structure, you can right click and add a new Selection. In this selection try pulling in the Currency InfoObject. You can add multiple selections next to each KF for their corresposnding currency unit InfoObjects...see if this works.
Hi Bhanu,
I didn't quite get what you mean - did you mean that I create a new selection, where I include my KF as well as the currency field? If I just do this without anything else, it's essentially the same as having the KF alone, as I am not putting any filtering conditions on the currency field. If you mean I should create a selection and put only the currency InfoObject, the query will be incorrect as no KF is specified in the selection.
Would appreciate if you can clarify further on this. Thanks.
Wayne

Parallel currencies - alternative to local currency changeover to euro??

I would like to know if there are any alternatives to local currency changeover to euro?
Estonia will start using euro 1 January 2011 and we are helping an estonian company investigating alternativs to the euro changeover in SAP. I know that SAP has programs that can mange the conversion/changeover, but I would like to know the alternatives.
The company uses 2 parallel currencies today. The company code currency EEK (10) is the first local currency, the group currency (SEK) is the second local currency.
Is is possible to use the functionality of parallel currencies in OB22 in this case and set the EUR as hard currency (currency type 40)? Can this be done for a company already in production? Will we be able to see profit- and loss statements and balance sheets from day 1 after we have activated the new currency. Any problems with opens items?
Are the any other alternatives?
Could one stategy be to start at new company code with EUR as company code currency? I realize we have to copy the configuration and masterdata and transfer the balaces to the new company code. What other problems do you see with this alternative?
// Lotta
Edited by: Lotta Johansson on Oct 1, 2010 1:56 PM

Hi Paul,
There is no dual currency phase, I mean not in SAP (there is a mandatory dual pricing period from july 2008 to december 2009).
As of 01.01.2009, SKK will be replaced by EUR.
The swithover can be carried out as soon as the 2008 fiscal year books closing will be done in SAP.
Hope this helps.
Ben

Remove Currency Display in Entry-Ready Columns

Hello,
I want to remove the currency out of entry-ready columns with mixed units (quantity and amount). For the display columns I used the NODIM operater as described here: Remove currency display, however this doesn't work for entry-ready columns. Any suggestions?
Thanks,
Norbert

Hi Gordan,
Thanks for your reply, but it doesn't solve my problem. What I want is how to display the currency code in JE Layout. I am able to display the rate in JE Layout but unable to find the currency code field in layout.
I know how to use the Fixed Exchange rate in JE, please do let me know if you know how to pull out Currency Code in JE layout, thanks.
Regards,
MH

Currency display in report

Hi ,
I have two Keyfigures created as Amount with Ocurrency ref.
In report when i display its also showing the currency near the Keyfigure value.I dont need that ,
for example
1500 Euros
200 euros
I dont need euros.I need only
1500
200
Regards,
Logu.

Hi,
Follow the below steps.
1. define a column structure.
2. define one selection with your key figure.
3. define a new formula with NODIM() function. and pass the selection which you have created as above.
4. Hide the selection using "Always hide" property.
This will help.

OBIEE11g - Report Multi Currency Display (Static Data)

Hi All,
I have a requirement where i need to display amount data in multi currency format in OBIEE 11g like LCY and OCY format.User have to select the currency type like USD,YEN,EURO and resulting amount data in report should display in that currency format.
Pls suggest me is it required to do ETL Changes i.e we need to load data in Database in multi currency format
can we do this at Report level i.e can convert the amount in required currency format.
Note: Spot rate is currency data it's loading by monthly its a static data.
please refer my expected output screen short:
http://imageshare.web.id/images/0dnlgxlvmhl7u5tdbac1.jpg
(currently we are displaying one currency now we need to show multicurrency)
Just FYI...
joins:
"GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."OCY" =
"GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."ORIG_CURRNBR"
AND
"GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."PPN_DT" = "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Business_Date"
here ocy & ORIG_CURRNBR is the foreign currency (i.e: USD,YEN,EURO etc)
Calculation part:
CASE WHEN "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Product_Type" IN ('Bond', 'Bonds', 'Callable Bonds')
THEN "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Nominal_AMT" * "GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."NON_DISC_SPOT"
WHEN "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Product_Type" ='Equities' THEN
("GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."MKT_VALUE" - "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."CAPITAL_GAIN" ) * "GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."NON_DISC_SPOT"
END
in the above calc amount * spot_rate
I already refer the below one but it wont suite for my case:
http://www.rittmanmead.com/2010/06/oracle-bi-ee-10-1-3-4-1-currency-conversions-fx-translations-part-1/
http://gerardnico.com/wiki/dat/obiee/currency
Thanks in advance
Regards,
Deva
Edited by: Devarasu on Nov 16, 2011 3:13 PM

Hi Deepak,
our table will like below one,how we can calculate on fly calculation for this,
in my dashboard MX_spot.ocy prompt column --> set request variable.
how i can use this request variable in RPD-->BMM --> logical expression?.
Table 1: Postion (Fact)
PRODUCT_ID      ORIG_CURRNBR     (Nom+Capital+PREM_DISC_AMORTISE) Business_Date
========================================================================
HKD T-NOTE 1312     CN1      48407.555               31/10/2011
HKD T-N 07Y1402     HKD          -45000.23               31/10/2011
Table 2: Mx_Spot (all currency with static rate)
OCY     NON_DISC_SPOT     PPN_DT
SGD     0.1962748     31/10/2011
HKD     0.1605621     31/10/2011
CN1     1     31/10/2011

OBIEE Report Multi Currency Display

Hi All,
i have a requirement where i need to display amount data in multi currency format in OBIEE 10.1.3
User have to select the currency type like USD,YEN,EURO and resulting amount data in report should display in that currency format.
Pls suggest me is it required to do ETL Changes i.e we need to load data in Database in multi currency format
can we do this at Report level i.e can convert the amount in required currency format.
Pls suggest.
Thanks in Advance

Thanks for your answer.
I found a solution I used virtual tables in the physical layer it will replace the views I had to create inside the DWH to handle this problem.and created the joins in the physical and business layer.then I had the result I wanted for reporting.

BW-BPS Dual Currency Display

Dear All,
Any suggestions on the following.
We have a transactional cube that stores data in GBP. Some of our users ould like to update values on a planning layout in Euros.
We are using the std BW translation for reports and we think we know how to convert the entered Euro values into GBP.
However we are stuck when it comes to displaying Euro values on the planning layout.
Any suggestions.
Thanks for your thoughts
Tony

Hi Tony,
As Gerd said, BPS cannot do currency translation on the fly as BW. If you really need planning functionalities in multiple currencies, two options I have used in the past are:
1. introduce 0curtype (Currency Type) if we need the flexibility to plan in either company code currency (10) or Group currency (30) or controlling area currency (20) or another specific currency type (i.e a equivalent currency). You need to add currency translation functions to keep them in synch with translation.
2. If I have limited number of key figure(s) that need the multiple currency functionality, have also used multiple currency key figures such as local currency and another currency for group currency.
Hope this helps,
Mary

Currency SEK and EURO in ME23N report are appearing as EURO values in BI

Hi Experts,
The currency Values like Swedish Krone (SEK) and Euro in ME23N report in ECC are appearing as Euro values and the amounts are aggregated to total amount in EUROS in BI report.
I have checked the Multiprovider, Infocube and DSOs, all levels have the same amount value in Euros as in BI report.
There is not currency conversions in either transformations or in the report level.
I have checked the ECC tables EKKO, EKPA nad EKBE regarding the extractor 2lis_02_scl, its Euro currency in the tables also.
Can anybody advise from where does ME23N get data as client wants the same SEK and Euro currency as in ECC in BI report.
Thanks in advance...
Chaith

Hi Chalith,
Check if the following link on the forum can be of help to you.
currency convertion from SKK to EURO
Refer to SAP note 327741 - Euro conversion for BW for further details.
Other useful notes:
327741 - Euro conversion for BW
376976 - Euro conversion in the BW System
390359 - Euro conversion for SEM
Regards
Snehith

Currency display problem in Report using WBS Element

Hi Experts,
PCS report displying different values aginest same WBS elements, in different currency.
Report painter tool has been used.
Requirement is to display entered currency in the report.
i.e the currency which is entered in selection screen.
Regards,
Oamkar

Hi Experts,
PCS report displying different values aginest same WBS elements, in different currency.
Report painter tool has been used.
Requirement is to display entered currency in the report.
i.e the currency which is entered in selection screen.
Regards,
Oamkar

Currency display format as per user settings?

Dear Friends,
I need a help.
I am printing currency grand total amount in my report.
the default format setting is like : 1,234,567.89
if user changes is format settings (going into system, user profile, own data, default) 1.234.567,89 then it should print in this format.
what i mean report grand total should come as per user display settings.
how to solve this?
Thanks in advanvce
Sridhar.

hi sreedhar,
data: c(100) type c.
data: l_amnt(100) type c.
data: length type i.
data: offset type i.
l_amnt = '1,234,567.89'.
replace all occurrences of ',' in l_amnt with '#'.
replace all occurrences of '.' in l_amnt with ','.
replace all occurrences of '#' in l_amnt with '.'.
length = strlen( l_amnt ).
offset = length - 3.
translate c+offset(1) using '.,'.
write : l_amnt.
rgds
anver
if hlped mark points

Currency display issue in the report

Hello Experts,
I am facing an issue with the currency type CLP(Chilian Peso).
It is noted that the CLP currency doesn't use decimals.
In BW reports the values in Local Currency are not OK.
For example , the right value is 150.755 CLP in R3 side But in the BW report the value is 15.075.500, 00 CLP which is misleading.
Could any one help me how to solve this issue.
In TCURX the following settings are maintained
currency type    decimal
CLP                       0
Regards

Hi Nivas,
I think following things are happening.
u2022     Updating The Amount Value into BW data target.
When we load the data into BW having amount field in it ,it checks for the TCURX table for the currency entry.
If the currency entry is present in TCURX table it divides the amount by 10**(2-CURRDEC entry in TCURX table)).
u2022     Displaying the amount into BEx reports.
The exactly converse happens while displaying such values in the report output,The amount values will be multiplied by 10**(2-(CURRDEC entry in TCURX table)) while diplaying the report output.
Please check below thread,
Here is the link for your reference:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/600aa67b-c348-2b10-f690-aaa81d12ec6a
Regards,
Deepak Chavan.
Edited by: Deepak Chavan on Aug 22, 2008 4:30 AM

Currency Display in Euro

Similar Messages

Maybe you are looking for