Current Date one hour before system date

Hi,
When I use java.util.Date currentDate = new Date(); the result turns out to be 1 hour earlier before my system date. Does anybody know how this is possible?
Greetings,
Marcel

koekie17 wrote:
- Control Panel -> Regional and Language Options -> [tab] Regional options -> Language and Location dropdownboxex changed to my country
- Double click on time in Windows taskbar -> [tab] Timezone -> Selected GMT + 1
I kind of doubt that the first has anything to do with it. Nothing I saw said anything about daylight savings time (DST.) I know the second doesn't fix it. The second sets the timezone without daylight savings time (DST).
Only way I know for sure There might be some way via the control panel.
taskbar ->"Adjust Date/Time"->Timezone tab->check box (at bottom) "Automatically...for daylight saving changes"

Similar Messages

  • My Calendar events show up an hour before they should.

    The times are correct in the editor but they show up in the calendar one hour before. The time zones are both central, so i dont know what the problem is.

    If you haven't done so, go to icloud.com, click on your name, click on Time Zone and make sure your time zone is set correctly and you have chosen a city near you.  If not, click the city name shown and select one near you.

  • Incoming mail delayed one hour

    Hello all,
    Since day one of running ML Server, some mail from outside the LAN is always delayed exactly one hour before it gets delivered. Ironically it's always mail from Apple. Mail from anywhere else never has a problem. Any thoughts on what this might be...?
    Thanks!

    This sounds like grey listing?
    See this thread for how to disable:
    https://discussions.apple.com/thread/4144298?start=0&tstart=0
    Although, disabling may be a little severe. There should be info somewhere on here about white listing domains too.
    Steve

  • Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

    Hi SAP Guru´s,
    Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
    Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
    Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
    This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
    Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
    The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
    This creates more issues at the store end as well as affecting business.
    We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
    Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
    Thanks in Advance.
    Thanks & Regards,
    P.P.Shankar

    Hello Shankar,
    Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
    Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
    See if it helps. The best option would still be that the 3rd part system considers the activtion date.
    Kind Regards
    Kaizad

  • Web-Outlook appointments which are one year before the current date are removed

    Hi,
    my Web-Outlook works fine with my iPHONE4s but the appointments which are one year befoer the current date are removed.
    Is there an option to keep all appointments?
    regards
    Andreas

    For the OST problem, delete the OST file and let Outlook create a new one.  But your problem may be that Outlook connects to Exchange 2013 using Outlook Anywhere only--MAPI RPC is gone--and for that you need a valid certificate.  So the self-signed
    certificate is likely your main problem.
    For a self-signed certificate to work, you must add it to every client as a trusted certificate.  That is hard to do with mobile devices, which is why it's recommended to obtain a certificate from a trusted public certificate authority.  You'd
    probably find Go Daddy to be reasonably priced, and there are others.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • NEXT_RUN_DATE before current date

    Hello,
    I'm wondering whether having an entry in the ALL_SCHEDULER_JOBS with the field NEXT_RUN_DATE filled with a date that's before the current date would trigger the launch of the job on Oracle instance startup?
    The problem I'm having: I'm making backups of an Oracle instance. Some of my scheduled jobs would run daily. If I take a backup today, the backupset will include the ALL_SCHEDULER_JOBS. If I recover the backupset, say, a week from now, when I re-open my instance, the table will include some jobs that have the next running date at some moment in the past. What will happen at the startup of Oracle? Will it launch all the jobs that are scheduled and should have been ran in the past?
    Thank you,
    Adrian

    hello,
    I got a problem with my jobs too, I do daily a job that calls a program that runs a datapump export.
    But if database was offline during the time the job should run, and database restarts, then jobs runs immediately after instance startup.
    I thought there was some of other parameter you could use to let it run only on that fixed time?
    Then I read something about the schedule_limit, but I think this does not work correctly on Oracle 10.2.0.3 (Windows platform)?
    I've a job:
    begin
    dbms_scheduler.create_job (
    job_name => 'DATAPUMP_RUN',
    program_name => 'C_DATAPUMP',
    start_date => '&date',
    repeat_interval => 'FREQ=DAILY',
    enabled => TRUE,
    comments => 'Daily datapump');
    end;
    So, I fill in the date on which it has to start and run daily from that date/hour.
    But sometilmes, database is offline, and the whole thing runs after database startup, not necessary and so not good for me.
    then I did this:
    begin
    dbms_scheduler.set_attribute(
    name => 'SYS.DATAPUMP_RUN',
    attribute => 'schedule_limit',
    value => numtodsinterval(5, 'minute'));
    end;
    (because value => 5 does not work?)
    But when shutdowning my database before the job would run and start it back after 6 minutes, the job still gets activated and runs ...
    what am I doing wrong?
    Is it better to work with a window to avoid this?
    thx
    by the way, this was oracle's resolution about it:
    Constraining Job Start Time
    A really nice feature of the new scheduler is the ability to constrain a job's start time to a specific period following the nominal start time. For example, suppose you have a job scheduled to run every evening at 6:00 pm. Due to system load or other reasons, the job might not actually get the chance to start until 6:12 p.m. Do you still want the job to start, even though it's 12 minutes late?
    With the scheduler, you can answer the question of how long past its time you're willing to let a job start. You do this by setting the job's schedule_limit attribute value (in minutes). The following specifies that my LOADNEWCUSTOMERS job must begin within 10 minutes of its scheduled start time:
    sys.dbms_scheduler.set_attribute(
    name =>'GENNICK.LOADNEWCUSTOMERS',
    attribute => 'schedule_limit',
    value => 10);
    If ever this job is delayed for more than 10 minutes past its start time, that run of the job will be skipped. The default schedule_limit attribute is null, which imposes no limit. When using Database Control, you can set this attribute from the Options tab of the Edit Job page.

  • Showing "current date - 8 hours" automatically

    Hi,
    For a report, I want to create two dashboard prompts. The second one should show the current date, and the first one should be "current date - 8 hours" automatically. For example;
    1. 5/11/2007 3:52:04 AM
    2. 5/11/2007 11:52:04 AM
    I can create the second one following these steps;
    “default to > variable expression” --> “@{system.currentTime}[dd/MM/yyyy hh:mm:ss]”
    What about the other? How can I create the first one?
    Thanks for your help, br,

    as SQL:
    select TimestampAdd (SQL_TSI_HOUR, -8, Current_Timestamp(0) ) from SubjectAreaName where TableName.ColumnName = 'some-existing-value'
    Note that -- from SubjectAreaName where TableName.ColumnName = 'some-existing-value' -- needs to evaluate to true.

  • Why does old sale order (The deliver date before current date) show VSF (independent requirement) in MD04?

    Dear All,
    I face one issue, the old sales order (the delivery date before current date) has became VSF (independent requirement) in MD04, could someone let me know why and how to fix it?
    Take 01.09.2014 as example, we have one 50PC's sales order with delivery date as 25.08.2014, in MD04, the system will show two independent requirements, one is 50PC's customer order and another is 50PC's VSF.
    We are looking forward to your kind help and answer, thanks in advance!
    Best Regards,
    Gavin

    Hi Gavin
    If I understood the issue correctly, system is showing both the sales order and the PIR on the same date, right?
    If this is the case, it's probably a PIR consumption issue. Take a look on the following note, especially question 10:
    772856
    FAQ: Consumption of planned independent requirements
    BR
    Caetano

  • Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data)

    Dear all,
    Can any one explain about this error,
    2014-11-02 19:19:29.58    *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-11-02 19:19:29.58    *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-11-02 19:19:29.58    Deleting log backup file. File: '\\Jdccb-mis\logshipping\JDCCBPROD_20141030134512.trn', Last Write Time (UTC): '10/30/2014 1:45:13 PM'
    2014-11-02 19:19:29.60    *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) *****
    This errors comes on My Secondary server during log shipping and database goes to restore mode.
    satish Kumar

    Hi Krishnp,
    These are the latest jobs in queue:
    89 Quadro de Horários 28/6/2014 1:45  N/D Arquivar Configurações do Sistema Aguardando Processamento 0%  
     88 Quadro de Horários 28/6/2014 1:30  N/D Arquivar Modos de Exibição do Project Web App Aguardando Processamento 0%  
     87 Quadro de Horários 28/6/2014 1:00  N/D Arquivar Campos Personalizados Aguardando Processamento 0%  
    When I delete the last work automatically related are excluded.
    Currently the queue is 406 jobs.
    David Soares MCTS:MBS - MCTS - MCITP

  • Best Buy moved delivery date by 20 days only 18 hours before originally scheduled delivery

    I purchased a Samsung gas range/convection oven on December 3, 2014.  Delivery was scheduled for December 30, 2014.  On December 29th, at 12:05 p.m. CST, a mere 18 hours before scheduled delivery, Best Buy emailed me to alert me that the delivery had been unilaterally rescheduled until January 19th.
    Unfortunately, do to the late nature of the notice of rescheduling, I had already sold/gotten rid of my old oven.  In response to this issue, I contacted Best Buy customer service and, after speaking with 6 different people of the course of 2.5 hours, was provided the following options: 1) Cancel your order; 2) Wait until the order is filled; or 3) Contact your local stores to check for availability.
    When asked if Best Buy would consider providing a partial discount on the oven purchase to cover the potential costs associated with renting an interim stove, the customer service representative told me that she was unable to help me in that regard and to ask my local store.
    Has anyone had experience getting a similar situation effectively resolved?  Has anyone ever spoken to a customer service representative with Best Buy that was actually able to resolve an issue?

    Dear rtjamison,
    When receiving a scheduled delivery date like this, I can understand your foresight around creating the space for your new oven by getting rid of the old one beforehand, and I respect that. It pains me to hear that this responsible act will now affect you negatively due to the untimely rescheduling of your order. I am very sorry for any inconvenience this has already caused you.
    On occasion, orders can be rescheduled because of sudden inventory constraints. Other times, scheduling issues can occur if a store is the one fulfilling the delivery and are absent an available delivery driver due to sickness; although, you would typically be provided with an explanation around this. Without being able to look up your order, I am not sure what the reason was in your case specifically. The options you were provided by the phone agent are all viable choices; however, I would like to work with my support team to see if there are any other options available to us at this time.
    As I was unable to pull up your purchase history using your email address you provided here on the forums, I will be reaching out to you via private message to obtain your purchase information so I may investigate further. To check your private messages, click on the envelope in the upper right-hand corner while you are logged into the forums.
    Sincerely,
    JD|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Auto populate system Current date in Info path form textbox

    Hi,
    I want to display system current date in info path when user opens new form.I have placed a text box and added now function and in format selected do not display time option.
    When i preview the form everything works as expected.the date is displaying like mm/dd/yyyy format without time :)
    But after publishing the same form to share point list when i open the form from browser the text box is not showing current date 
    Instead it is showing yesterday's date :(
    Can anyone help me to resolve the issue.
    Regards,
    Poovi

    Hi Poovi,
    According to your description, you want to enable the text box to show the current date when opening the form from browser. However, the date that your text box displayed
    in the SharePoint site page is different from the
    one in the InfoPath Designer.
    In InfoPath, the date displayed is the same as the system date. However, the date displayed in the SharePoint site
    page depends on the Regional
    settings of a site other
    than system date.
    As a solution, you could set the time zone in Regional settings of a site if needed.
    Here is a link about how to change the Regional settings of a site, you could use as a reference:
    http://office.microsoft.com/en-sg/sharepoint-foundation-help/change-regional-settings-for-a-site-HA102894666.aspx
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Copying files to my MBA Early 2011, 10.6.7 changes their 'date modified' to the current date. It happens only to some of the files copied. Any idea what my be causing it. Never had this problem before, on othe macs I have owned.

    Copying files to my new MBA (early 2011) running 10.6.7 results in their 'modification date' to change to the current date. Any idea what may be causing it. It happens only to some of the files (there is no pattern to it.). I have not seen it previously in many other macs I have owned.

    Hi all
    I am bumping this thread again because I can't believe that I am the only one experiencing this issue. At times it is costing me hours repeatedly copying files until eventually the date doesn't show as modified.
    I thought I had cracked it earlier by changing the Sharing & Permissions settings, and applying to enclosed items the ability for Everyone, Me and Staff fo have Read & Write permissions - but that doesn't seemed to have changed much.
    Copying in smaller batches helps sometimes, but then other times it makes no odds, and the Date Modified date shows as the original date for a few seconds, only to change to today's date. Driving me nuts because there is no pattern to it.
    Files which I have copied and show their original modified date, when moved to a subfolder, then have their date changed to today!!! Copying other files into the folder results in files that were previously OK having their Date Modified changed!
    Am I on the only one?

  • Date less one hour

    Hello,
    In a shell script on Solaris, I want to get the current date less one hour. I did : TZ=MET-0 date '+%d%b%Y_%H_00_00' but it doesn't work if we are in the summer hour. How can I have this without the reference of the GMT ?
    Thanks
    Delphine

    set TZ="US/Central" which is always one hour behind.

  • Data one hour off in VI Logger and can't use navigation bars

    I believe after Daylight savings time in October my data appeared one hour behind in the Historical Data view in VI Logger. This would not be so big of a problem, but when I go to use the navigation tools to skip through the data or zoom in and zoom out, they do not work and the screen is always taken back to the original time (where there is no data because it is one hour behind.) My data is sampled at 50,000 samples/sec for about 1 minute, so it takes forever to scroll through the data at this sampling rate.
    I tried re-setting the time in my Window's system, but this did not help.
    Please help!!!

    Hi,
    There is a KB regarding this issue:
    KB 330J3S0U: Why Do My VI Logger Timestamps Seem To Be Off By An Hour?
    I would actually recommend referring to the related link on the bottom referring to Citadel Handling Daylight Savings Time. To workaround the Daylight Savings Time, 2 queries are made -- one prior to Daylight Savings Time and one after. Then the two queries are merged to get the entire range of data.
    Hope this helps.
    Kileen

  • Find closest date before current date

    Hi,
    How to get the closest date record before the current date record using workflows(preferably) ?
    Detailed :-
    For e.g. A record is created with status as "Open". On click of a button a program should be invoked(workflow or script) to fetch the most recent records with status as "Open".
    That means if a new record is created today and already there are 3 records with same status as "Open" with two created yesterday and one created 2 days before.Then our program should fetch only those two records created yesterday and not the one created two days before.
    Thanks
    Sambit

    The simplest solution I can offer is:
    Add a search spec on the BC for Status="Open" and add a Sort Spec on the BC for "Created Date (DESC)". When you query the BC, just focus on the first record which should be the most recent record in "Open" status.
    Hope it helps!

Maybe you are looking for