Currently using iPhoto 7.1.5 We recently upgraded from Leopard to Snow Leopard with updated Quicktime player. Our videos off our camera no longer open in Quicktime by double clicking. Any help?
We are running iPhoto 7.1.5 '08. After upgrading to Snow Leopard 10.6.8 and Quicktime Player 10.0, our videos off of our camera no longer open by double clicking. Any help?
Thank you for your quick reply. I'll give it a try. Another workaround I figured out last night is to right click the video, click show file, and then double click the file. Quicktime the plays the video.
Similar Messages
-
I,VE RECENTLY UPGRADED FROM TIGER TO SNOW LEOPARD, SHOULD I UNINSTALL TIGER?
I,VE RECENTLY UPGRADED FROM TIHER TO SNOW LEOPARD. SHOULD I UNINSTALL TIGER?
Now that your question has been answered can you please stop shouting. Typing in caps is considered shouting on the web. Besides that it is difficult to read.
Allan -
Hi,
I purchased our iMac 4 with Tiger OS X some time ago (2007) and until recently had absolutely no problems....and then, we met the Snow Leopard. I added the 2GB of memory without a hitch. Backed -up what needed to be backed up to an external hard drive, check. When I tried to install the Snow Leopard disc, it would only install partially or not at all and after almost 16 hours of trying to figure out where I went wrong, I took it to the Apple Store. They said our "antique" slot disc was malfunctioning (only playing CDs because of the different laser calibrations) and they performed a clean installation of Snow Leopard by external USB drive. Ever since we got the computer home it has been a NIGHTMARE! The computer freezes constantly. It runs much slower than before we performed the upgrade (even with an out dated Tiger!!), sometimes it doesn't even boot completely, leaving only the white screen and I'm going crazy! Finally, I get on to Safari without it freezing 15 minutes after loading (angles singing) and tried to purchase a software that will copy my iPod to the new iTunes. An error popped up politely stating that I had made a "BAD REQUEST - Your browser sent a request that this user could not understand. Reason: Your speaking plain HTTP to an SSL-enabled server port. Instead, use the HTTPs scheme to access this URL, please." Since he asked nicely, I clicked on the supporting link for more information. Now there is another error message "Your copy of Safari is missing important software resources. Please reinstall Safari". I have gotten this message twice before.
I know I can always take it back to the Apple Store, however, if I can try to diagnose the problem myself and save the strain of throwing it through the Apple Store's window causing a frustration inspired ruckus, I'd consider it a good day. Does anyone have the slightest idea what might have gone wrong? And is it really worth the aggravation (or apprehension hehe!)? Should I throw in the towel and purchase another one?
Any help or input would be graciously appreciated!!Sorry for your pain! I would say since you have an open case with the Apple Store (they did something you say had a worse effect than before) you have a right to go back and continue, I would think. We could try to sort it out but it sounds like it could be fairly complicated. Four years old isn't that terrible, but it's not surprising to hear of CD drive problems. I think it is worth another trip back. Then you'll know better if it's time to buy new. And a refurb is cheaper than one of those plate glass windows!
-
I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?
http://support.apple.com/kb/TS2986
-
I recently Downgraded from Lion to Snow Leopard 10.6. How do I update to 10.6.2 or beyond?
This is the problem... How do I fix that?
app61 wrote:
I recently Downgraded from Lion to Snow Leopard 10.6
How did you do that ? -
Help - upgrading from Tiger to Snow Leopard AND new larger hard drive, MBP
Howdy!
My iPhone has finally demanded that I upgrade my MBP from Tiger. And as if by coincidence, my now puny 100GB internal drive is packed full with less than a gig free most of the time. (10% free is the MINIMUM free allowance, I know!!) I run old copies of Adobe CS2, Quark, Quickbooks, Microsoft Office... would love to keep them working without purchasing upgrades, but probably isn't a realistic hope. None of it is mission critical at this point.
So I've purchased the $29 Snow Leopard DVD (from a reseller - it says CPU Drop-In DVD Version 10.6 on the disk), and a new 750GB internal drive (same reseller - The drive is a 2.5" SATA 5400RPM 8MB-Buffer Hard Drive (9MM Slim) (RoHS Green Friendly)), to get with the times.
My other resources include:
- two 1TB LaCie external drives with FW and USB2 ports
- one other LaCie external drive - I think 360GB?
- Retrospect 5.0 (most of my backups are encrypted Retrospect files on those three LaCie external drives, but there's some room on them)
- a $22 USB 2.0 to SATA/IDE adapter with AC power, to access whatever laptop drive might be without an enclosure temporarily
- a copy of Carbon Copy Cloner software
- I just ordered an upgrade to my ancient (OS9) copy of DiskWarrior
- A monster UPS battery backup and line conditioner that everything plugs into for this process
It has been a long time since I've DIY'd any undertaking this complex, and I'm looking for advice on what to do first, how to go about this.
Here's my setup:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
I'm guessing I should do it like this, PLEASE EDIT or make suggestions or tell me what I forgot to do before I do it!!
1. Back up everything to at least two external locations! Also, make a bootable copy of my current internal drive in its own volume, to at least one external drive that is formatted in HFS+ GUID partition style, with Carbon Copy Cloner (would Retrospect work well for this instead?).
2. Free up at least 20GB on the current internal drive (100GB). Hopefully 30GB.
3. Run Disk Utility on the current internal drive. Fix any problems. (Should I hit it with DiskWarrior instead?)
4. Format the new 750GB drive to HFS+, GUID partitions. (How long will that take? Can I do it with the USB-SATA cable adapter, sitting on my desk, or does it have to be in an enclosure? The adapter has AC power)
5. Run Disk Utility (or DiskWarrior?) on the new internal drive in its temporarily external position. Fix any problems.
6. Boot off the Snow Leopard CPU Drop-In DVD and install onto both drives. (Will this version of the DVD I have wipe all files when it installs to a disk???)
7. See how they run. Boot off the old 100GB internal drive, boot off the new to-be-internal 750GB drive. Panic if it's not going well.
8. If the current internal 100GB drive is rocking Snow Leopard and my familiar files and apps seem somewhat functional, use Carbon Copy Cloner to recreate the volume on the new larger drive. Then swap the drives physically. (Links to good step-by-step instructions on this part would be much appreciated here!!)
9. If the Snow Leopard DVD overwrote or snuffed out my familiar files and apps on the old internal drive, sigh deeply, then swap the drives physically. Use CCC (or Retrospect? or Migration Assistant?) to fetch my junk from the old internal drive's backup and plunk it on the new bigger internal drive (now installed).
10. See how it runs. Shake my fist at the sky over the planned obsolescence of technology paired with the seductive power of my iPhone. Grumpily upgrade the software that I actually create income with.
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
Thanks!Howdy slowpoke43, and a warm welcome to the forums!
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
LOL, if your faking it you're the best!
1. Yes, absolutely... no CCC would be best in my experience/opinion.
2. Yes, the more he better... Free Space is no longer our Free Space, but OSX's.
3. Indeed, & if you have the correct version of DW, do that.
4. Yes, not long, A/C power is great.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
6. Yes, boot off the 10.6 DVD, & no Snow Leopard does by default what we used to call an Archive & Install, saves & updates all your info, APPs, Music, etc., it may quarantine a few things or not but will tell you.
7. Absolutely, but Panic won't be needed with your great preparation & Bootable Backups!
8. Not quite sure I understand, but run SL for a few days before you do anything.
9. Yeah, but again with you doing everything right from the gitgo, I can't picture that happening.
10. Yes indeed, the hangup with yours is that it only holds 2GB of RAM... a pain in 10.5 & up IME.
Again let me say... GONGRATS, I've never ever seen anybody so well prepared & informed despite your diffidence! -
Best way to upgrade from Tiger to Snow Leopard and make a backup - help!
Hello, I have always found this discussion board the best place to go to get advice on my mac. I have an imac with Tiger OS. I want to upgrade to Snow Leopard - just bought the box set. I also have an external HD. I want to make a backup of my current system onto the hard drive in case of problems. How do I do this? Once I have done this, should I do an upgrade to SL or do a clean-install? Please advise - I have average tech abilities. Thank you!!!!!
I like KT's advice, and would add some words from a very knowledgeable mac person - John Gruber @ http://daringfireball.net/
I Believe in Murphy’s Law
Friday, 26 October 2007
Here’s how I recommend installing major new OS releases for typical users. (Atypical users would include anyone who ran developer seeds of the OS.)
First, make a complete backup of your current boot volume to an external FireWire drive using SuperDuper. (Carbon Copy Cloner would be my second choice.)
If you don’t back up daily — or at least very regularly — you’re foolish. If you don’t back up before upgrading your OS, you’re really foolish. I use SuperDuper’s “Smart Update” feature to clone my boot volume every night — the “smart” aspect is that it only changes the files that have changed since the previous backup. Before I install an upgrade, I quit every running app and run a fresh backup to create a snapshot of my boot volume. That way, if anything goes wrong, I can revert to exactly the state the system was in before installing the upgrade.
Next, boot from your external backup volume to make sure that it works. What you want to see is something that looks exactly like booting from your regular internal hard drive. Since I’ve been using SuperDuper, this has always been the case — I have never failed to successfully boot from my backup drive. Better safe than sorry, though, so I never skip this step.
Next, shut down the computer, and unplug the external backup volume. The odds of an OS installation corrupting a plugged-in FireWire volume are very small. The odds of an OS installation corrupting a FireWire volume that is not plugged in are zero.
Then boot from the installer DVD, follow the on-screen instructions, and perform a default upgrade. The default upgrade is the best choice for most users almost all the time. The reason Apple makes it the default and most obvious way to upgrade is that it’s the most convenient, and most tested upgrade path.
Update 28 Aug 2009: Starting with Snow Leopard, instead of booting from the DVD directly, you should instead pop in the installer DVD and launch the “Install Mac OS X” app on the disc. This will reboot your machine from the DVD, yes, but first it will download any necessary software updates that have come out since the disc was pressed. It’s a subtle but very nice improvement to the installer.
Arguments that there is something mysteriously dangerous or deficient about the default upgrade procedure — and that you should do a clean install instead, followed by tedious hours manually migrating software and data and preferences from your old installation — are voodoo. Apple’s installer engineers spend a ton of time making the default upgrade procedure as convenient as possible.
If you’re not a typical user; like, say, if you’ve been running pre-release developer seeds of Leopard, or if you’ve diddled with your 10.4 system software in unholy ways and really would like a factory-fresh start with 10.5, then I recommend the Archive and Install option. (That’s what I do, when upgrading from previous developer seeds.)
So, in short:
Do a complete backup clone to an external FireWire drive.
Test that the backup is indeed bootable and up to date.
Unplug the backup drive.
Pop in the installer DVD and launch the “Install Mac OS X” app.
If anything goes wrong in step 4, you have nothing to worry about, because you know that you have a complete, bootable backup.
Most people, of course, skip directly to step 4. And the odds are it’ll work out just fine for them. I say, why take a chance? -
Upgrading from Tiger to Snow Leopard, what happens with iTunes and iPhoto?
OKay, I picked up a Mac Boxed Set this weekend and I want to do the upgrade, with a clean install. Since I have never done this before, I don't know how it works. I plan to make a bootable backup onto a USB drive using Carbon Copy Cloner, and then transfer those settings back to my iMac once Snow Leopard is installed, but will that include all of my iTunes and iPhoto content? If anyone can let me know how that works I would appreciate it! THanks!
BrandeniTunes is updated to the version on the Snow Leopard installer disc. Nothing happens to iPhoto as it's part of iLife, not OS X.
If you erase the target drive then install Snow Leopard, you can use Migration Assistant to migrate your Home folder, third-party applications and support files, and network settings from your bootable backup. -
HELP! HOW DO I KEEP LOGIC WHEN UPGRADING FROM TIGER TO SNOW LEOPARD!
So I use a later macbook but have another slightly older one (got it in 2007) that kinda kicked the bucket. I'm now able to use it again (with a new setup). I have Logic express (an older version) but the macbook is running that last version of tiger before leopard. I want to upgrade to snow leopard (which i've learned I can from tiger directly for the low price) but I don't want to lose logic since I payed for it and don't have the install discs anymore.
I don't mind getting rid of everything else but I want to keep the actual program on the comp and just run it in SL. What specifically do I have to do (as far as backing up and all that) to CLEANLY upgrade from tiger to SL but keep logic? I'll have an external HD by the time I'm ready so keep that in consideration.I have never used Logic Express so I can't help you but if you to the Logic Express Forum and repost over there you might be able to find someone who knows about Logic Express to help you.
Allan -
Can I upgrade from Tiger to snow leopard using an external DVD drive
I've been trying to upgrade to Snow Leopard from Tiger but keep nothing happens. I keep getting a grey folder with a question mark on it. Can anyone tell me what this means?
If you have another Mac with Firewire, you can use it's Optical Drive as a big Firewire Optical, put the Install disc in the other Mac, boot the other Mac in to
Target mode...
http://support.apple.com/kb/HT1661
Connect a fw cable, use the Otion key on this one to choose the Install Disc in the other Mac.
Can I install if I make a bootable copy to my firewire external?
Yes, especially if you have a small 5 to 9GB Partition, you can use DU to Restore the Install Disc to that. -
My iPhoto will not stay running. It opens for a minute and then quits unexpectedly. I get an error message and it says a report will be sent to apple. My computer will not recognize my iPhone either. I cannot figure out how to fix this issue or if there is any way to fix it!
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Help with Upgrading from Tiger to Snow Leopard
I would like to upgrade my os from Tiger 10.4.11 to Snow Leopard. Best Buy said that I would have to buy the box set for $129 for that to be possible. The box set says that it includes Snow Leopard, but how do I know it's just not the Snow Leopard upgrade? Any advice is greatly appreciated!
Hi She, and a warm welcome to the forums!
The $29 version works fine if you don't need iLife or iWork Apps that the "Box Set" contains.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/ -
I've already read what http://www.apple.com/osx/uptodate/ says. But it's about new Mac only. So, are there any chances? I made the upgrade by stupid mistake - I've belived that 10.7 is supporting AirPlay Mirroring for Mac.
No, unfortunately you don't qualify for the free upgrade.
-
word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?
Hi Rachel,
Have you tried reinstalling Microsoft Word? Have you tried reinstalling Office? Have you run any updates recently for Microsoft Office? There was one that came out this week. You may wish to ask this question over at the Microsoft Word forums, there's a good chance you'll get a better answer as well. This forum is primarily designed for the MacBook Air hardware and interoperability with OS X on a MacBook Air.
http://support.microsoft.com/gp/cp_macoffice2008_master -
Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?
Since iPLM failed to help try the following:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT
Maybe you are looking for
-
URGENT Bridge and cache error photo corrupted NEED HELP
We were going to edit a photo and upon opening it and error came up and said: "edit bridge encountered a problem and is unable to read the cache. please try purging the central cache in cache peferences to correct situation" We solved the cache probl
-
Is there a way to automate Reaktor in Logic 7
Is there a way to automate Reaktor in Logic 7.. i.e all the nobs? Thanks soo much! Ian Buzz http://www.relentlessdancemusic.com/ PowerMac G5 Mac OS X (10.4.8)
-
I have the creative cloud that I use for my schooling and I downloaded both Adobe Bridge CC and Flash Professional CC on the Creative Cloud and I cannot find or access them on the computer - where did they go?
-
Hide refresh from UWL tray menu
How can I hide the "Refresh" link from the UWL inbox tray menu? The refresh link that I'm referring to is along with other links like "manage substitution rules, personalize view, Display connection status". Thanks Praveen
-
TRM-TM TABLE "DIFT_POS_IDENT" IS NOT UPDATED
When I create a money market transaction, the table DIFT_POS_IDENT is not updated. Only the securities transactions are updated in the table. I want to know if this is the correct situation or I can config it in IMG.