Cursor not appearing in password input field

Hi All,
I know this is probably going to be a bit of a long shot but i have got two fields on the front screen of my web dynpro for abap, with the second field set as a password field.
When I tab through the fields the cursor apears in the first field but when I press tab again to move to the second password field, although it highlights the field the cursor does not appear so I cant start typing without actually using the mouse to click in the field!
If i place the password field first or make it a normal input field rather than a password field this problem goes away but obviously these are not valid solutions to this problem.
Any ideas would be much appreciated.
Mart
P.s. i am not 100% certain about this and not sure if it will help with a solution but i believe this bug has only surfaced since we upgraded to the lastest patch level!

Hi All,
Before I raise a support ticket with SAP I was just wondering if anyone ever found a solution to this problem. Have managed to put off finding a solution for as long as possible:-( Only solution i have find so far is to capture the user pressing enter and then passing the focus onto the password field but this is not great as the user has to press enter instead of tab which is not particulally intuative.
Regards
Mart

Similar Messages

  • The list doesn't appear in the input field

    Hi All
    The list doesn't appear in the input field when I make input or press the BACKSPACE key.
    Notes:
    I made this modifications:
    1. In connection properties I set High speed connections (LAN)
    2. In local data settings I set the historial to ON
    we had SAPGUI 620 in workstations and now we have installed SAPGUI 710
    Thanks for your time and help
    Message was edited by:
            Genner Sanchez

    Hello Genner,
    see note 399180:
    o  FIELD NAME LENGTH
       The history is only written for field names with a maximum length
       of 40 characters. In earlier SAP GUI versions, this length was
       restricted to 30 characters. The history file must be deleted to
       achieve extended support.
    o  FIELD LENGTH
       If the length of the input field is 60 or more characters,
       history is not written either. "Input field length" refers to the
       dictionary length of the field, not to the "visible length" on
       the screen. (The restriction of the input data to 60 characters
       results from the fact that text editors were often built as lists
       of text fields with a length of 60 in the past. In those editors,
       this history was quite annoying.  On customer request, this was
    Regards, Martin

  • Strange white light appearing when password input required on locked apps!

    Strange white light appearing when password input required on specific apps... Locked apps.
    It is a thick white line) appearing momentarily on upper left side of my screen.
    This only appears briefly as specific apps are opening up .....only on apps where a password is required,(locked apps) like password managers, Apple App Store, etc.
    (this is a little troubling… And I'm wondering about the security of my phone now)
    I'm using iPhone 5s with latest iOS 7.1 This only started after the latest iOS update!
    Although this line appears very briefly, I was able to get some screenshots examples (see links)
    [IMG]http://i58.tinypic.com/1zo9dt1.jpg[/IMG]
    [IMG]http://i61.tinypic.com/260bns8.jpg[/IMG]
    Apple has no idea what this is… They're only suggestion was to wipe the phone clean and reinstall from the last backup! If that doesn't work, they would replace the phone.
    Before I have to do this, I'm wondering if this could be a phone app doing this, or the iOS or something easily explained/ remedied?
    Any ideas?

    Anyone have any thoughts on this? Searches and experiments
    still not yielded an answer...

  • Field functional area does not appear as an entry field into the document..

    Hi,
    We are using the functional area field in our system. In order to access this field, we proceeded
    to customize the system as follows:
    -  We already activate Cost of Sales Accounting for our Company Code.
    -  The field functional area was set optional through transaction OB41, for the posting keys required.
    -  The field functional area was set optional using transaction OB14, for the field status group assigned to the GL accounts.
    However, we cannot enter the area functional when we are posting documents related to customers and vendors. 
    Although the field functional area was set optional, it does not appear as an entry field into the document screen for the
    different transactions: fb70, fb60, f-02,fb01.  It is only happening when we areentering the document position for the vendor/customer.
    Regards,
    Efrain

    Hi,
    In FB70 or FB60 change the layout ........ select the line item layout configuration, you get a separate Table Settings screen pop up where in you need to select "Administrator"  button the system displays another pop up window where in you can check whether the Functional Area field is checked as invisible if so remove the check mark and active the settings.
    Kind Regards

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • Cursor not focusing in the text field after Object tag load in IE

    Hi,
    We have an applets class "ABC.class" in our application. To include this class in a jsp page we are using OBJECT tag. This tag is written inside a if block in the jsp page. Based on the if condition this OBJECT tag has to be loaded. Below is the code we are using:
    <%
    if(testCondition)
    %>
    <OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" NAME="applet" width="0" height="0">
    <PARAM NAME="CODE" VALUE="ABC.class" >
    <input type="hidden" id='myText' value="Please configure the jinitiator version to Oracle applicaitons Jinitiator version." >
    No JDK 1.3 support for APPLET!!
    </OBJECT>
    <%
    %>
    In the above code if the "if condition" is satisfying, then cursor is not focusing on the required field. The code to focus on the field is written in the javascript function which is called onLoading the page.
    we are using IE 7 and IE8. In IE 7 sometimes working fine but in IE 8 we are getting this issue.
    Can anyone please help us how to focus the cursor on the required field even in the case of the Object tag loading.
    Thanks,
    Eswari

    Hi Nicky,
    Thanks for your reply.
    We are not using JQuery.
    Actually the code to focus is written in the function which is called onLoad of the page that will be executed after the page loading. If we keep alerts in the onLoad function then the cursor is focusing to the required field.
    Thanks,
    Eshwari

  • Pressing tab key within table not scrolling to next input field

    Hi All,
    I have a table with editable and read only fields. I have more than 20 columns. When the tab Key is pressed it scrolls only to the editable fields that are in the visible screen. It does not scroll the table to the right to the next input field.
    However if I change the screen size so that the scroll bar is required for the browser then it will scroll across moving the browser scroll bar, moving the cursor to the input field that was not visible. Again it does not go further moving the scroll bar within the table to the next editable field to the right.
    The table has been set to scrollable with the scrollable column count set to 8.
    We are using explorer 8 on 7.01
    Is it possible to have the tab key move from input field to input field scrolling the table to the next input field if it is not visible yet?
    Thanks
    Bruce

    What you describe sounds like the correct functionality.  If you set a scrollable column count, only the visble rows are actually rendered on the client side.  When you use the horizontal scroll bar, you are triggering a server side event to retrive the next set of visible columns.  Therefore the browser doesn't actually know anything about non-visible columns and hence the tab can't go to them.
    When you increase the number of visible columns (or don't set anything for visible column) you render al the columns on the client side and use the browser scrolling.  Therefore the tab works.

  • Values not appearing in Dropdown for field

    Hi All ,
    My issue is that i have a field in a table which has a dropdown list for choosing values. Somehow the dropdown does not contain any values.
    The dropdown is supposed to fetch the fixed values from the value range of the standard domain 'SO_ESCAPE'. when i click on the dropdown an empty list appeard, where as the dropdown appears for a different field in the same table.
    in the field attributes for this field in screen painter the value list is set as from DDIC/flow logic.
    Can anyone help me out on this pls ???
    Thanks.

    Hi All,
    Thanks for all you suggestion..... I have solved the issue...
    The domain used a standard SAP domain SO_ESCAPE. The issue was that in the domain there was a value range (intervals) defined ( 1 - 9) and also few single values were defined.
    The single value had alphabetic keys, hence there was an ambiguity..
    The interval range allows to enter only values within the interval and the single values were having alphabetic keys. Also because the field is a dropdown we cannot enter values manually also.
    Now ia copied the domain to a Z domain and took away the interval.
    once again thanks for all your ideas

  • Calculated Field formula not appearing in Power View Field List panel

    Hi,
    On Power View1 sheet of this
    workbook, the two PowerPivot calculated Field formulas (First Visit and First date of FY) are not appearing in the Power View Fields panel on the right hand side.
    I want to drag client and First Visit (calculated Field) to the Power View.
    Why is this happening?
    Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

    I found a workaround for it - I was having the same problem as you. I wanted to display the last refresh date of my data, but Power View wouldn't display a date resulting from the [Last Refresh]=MAX(Date[Date]) formula.
    HOWEVER, a Pivot Table can handle that Calculated field just fine. So I renamed my measure "Refreshed Date" and added another tab in the Excel Sheet. I added a Pivot Table from PowerPivot into cell A1 and the only thing I put was that single
    measure (A2). To the right of that, I did =A2 and created an Excel Data Table. The title of that was "Last Refresh". Now, I could add that Data Table to the PowerPivot Model and into Power View. And then I hid that tab.
    The only downside to this method, is that if you're refreshing single tables at a time, you have to remember to refresh the Pivot Table when new data is added AND update the data in the model. I'm only connecting to one database, so I just choose
    "Refresh All" in Excel and it updates everything. It works perfectly! :)
    Well shoot, I even took a screenshot that helped explain everything, but it won't let me post it because my account isn't verified and it won't tell me how. If you have any questions, please let me know and I'll clarify!

  • Forgot your answer : send request security info does not appear under password and security

    When going into My Apple Id then Password and Security, it is looking for you to answer security questions. I have forgotten them. The option on the bottom where you can send the request security info does not appear. I have tried different computers and different operating systems but still cannot get the option to appear.

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (124482)

  • User can not enter value in INPUT field.

    hi experts,
    i have a table control on the screen which have one input field which user needs to fill. But as per he business req. we don't want him to enter any value, values should be enter from the search help only.
    If i make input field Read only it comes in gray color and user get confused. tell me some way so i can create white input field in which user can not enter values from key board.
    Please suggest...
    points will be awarded...

    >
    ashish gupta wrote:
    > hi experts,
    >
    > i have a table control on the screen which have one input field which user needs to fill. But as per he business req. we don't want him to enter any value, values should be enter from the search help only.
    >
    >
    > If i make input field Read only it comes in gray color and user get confused. tell me some way so i can create white input field in which user can not enter values from key board.
    >
    >
    > Please suggest...
    >
    > points will be awarded...
    This you cannot control. because if it is enabled only in that case you can see it white.
    do that thing as suggested by basakar to add a new input field just besides first one with zero padding.
    One workaround is use an image instead of real input field. the image should have the input field as image.
    and besides it create the input field with width 0 and padding also zero.
    i think this can fulfill the requirement.
    Thanks
    sarbjeet singh

  • My mic is not appearing as an input option in Logic Pro X preferences

    I am having trouble getting Logic Pro X to read my microphone as an input source. My computer is a Mac OSX 10.8.5. I believe my microphone is a Shure SM27 Large Diaphragm Condenser Microphone. The audio interface, as you can see in the pictures, is an Avid M-box.
    I'll preface this by saying I am not technologically savvy whatsoever. Here are the directions I've been trying to follow to get my microphone to work, so I can start recording: http://www.co-bw.com/Audio_Recording_Logic_Mic_HookUP.htm
    However, that page shows the Audio Midi Setup toolbar as having an "audio" option that you can click to find the Aggregate Device Editor. For some reason, as you will see in the picture I've attached, my Audio Midi Setup does not have that option.
    I've also attached pictures of every component involved in this process to give everybody a better idea. It doesn't make sense to me why my microphone isn't recognized by Logic, but I'm hoping somebody can help. If you can, I would be extremely grateful, as this has been an extremely frustrating process. Thanks.

    Just to be doubly clear: your Mac OS - Audio MIDI Setup will NOT see what is plugged into an audiointerface, it only sees the audiointerface itself and all its available in- and ouputs.
    Second, those instructions you linked to are (I think) for Logic Pro 9 on OS X Snow Leopard, or older - the layout of AMS has changed somewhat since. You can find the Aggregate Device editor by clicking the little cogwheel  bottom right of the AMS window.
    But: you'll only need an aggregate device if you need to record your Sure and the built-in mic simultaneously. Or if you want to use your Avids' outputs and the Macs' output simultaneously. To just record your Sure, all you need is to select the M-Box as input device (replacing the built-in mic in picture 2), then, in Logic, create a mono audio track and choose the right input (1 or 2, probably), depending on where the mic's plugged into.
    BTW, those plugs are commonly known as XLR plugs. Also,  the microphone need phantom power. Don't forget to turn that on, or it still won't work.
    And, to repeat Pancenters' point: right now you appear to have the built-in microphone of your computer selected as the only input source.
    Under Logic's Help menu you'll find the complete manuals.

  • Cursor not appearing on Mac

    Hi,
    The site that i did works on normal pc s.
    But on mac's it has a problem.
    I tried it on both firefox and safari but in input texts the cursor doesnt show up nor you can write anything into it.
    Any ideas please??

    Hi all,
    I run the html code on safari, chrome on mac.
    There the cursor:pointer; is working. But In extension, It is not working. Does anyone have any idea about it?
    Am I missing something here?
    Thanks for any help..

  • In SES(ML81n) Dicsounted price not appearing in Net Value field.

    Hi Guru's,
    In Service po which is subjected to discount  net and gross price will display accordingly however  when i do the service entry(ML81n) for any discounted po  it displays same gross price even in the net value field in the print preview. Is this standard behavior of SAP?  if yes, then how to over come?
    Your feedback is highly appreciated.
    Thanks & Regards,
    Anil.G

    Hi Sangita,
    Pricing procedure is  MS0000 for SES. checked in both tables in header table ESSR its coming properly where as in ESLL its showing same gross value in Net which is not correct.
    Advice me on how to proceed.
    Thanks & regards,
    Anil

  • After Effects clone stamp tool cursor not appearing. It is not the caps lock. This is my first time using it.

    Any ideas?

    Instructions for using the Clone Stamp tool are here:
    http://helpx.adobe.com/after-effects/using/paint-tools-brush-clone-stamp.html#clone_stamp_ tool

Maybe you are looking for