Curve 9220 Restarting again and again
Hi I have a blkberry curve 9220 model and its been 10 months i have been using it...but since last 1 month my phone has started getting rebooted it self.
It suddenly blacks out wd the red light flashing and then it goes off...and i have to take out the battery and restart it.
at times it gets restarted and again goes off instantly..with crossing the limit that the phone gets restarted 10 times in an hr!!!!!
Plzzzzzz help...its really irritating..!!
Can anyone suggest a probable cause or solution to this!!!
Hello duafalak
Welcome to BlackBerry Support Forums
The problem might be because of any Installed third party application or the media card can you try removing the media card to see if that helps !
If that fails I would suggest you to Reload the OS to rule out any Software issue , But after reload leave all third party application for a few days to see if they are the culprit ,Use a selective restore i;e only Contacts and calender entries don't install any apps from your backup.If problem don't appear install only BlackBerry Native apps. So first do a backup using Desktop Software then Reload your device Software , for help refer to this Knowledge base :
KB03621 : How to Reload BlackBerry Device Software and application using BlackBerry Desktop Software
Please try it and let us know of your progress.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
After an actualization mu BB curve 8310 restarts over and over again
After an actualization mu BB curve 8310 restarts over and over again, what can I do to fix it?
actualization, sorry...
yeah, I do have a media card, I'll readdy took it out and it didn't work, it just keeps restarting, I had to go back to the OS 4.2 -
CURVE 9220 HEATS UP AND DRAINS BATTERY LIFE
My blackberry curve 9220 gets really hot and starts to drain the battery .
the entire battery life is dained out in less than 3 hours
i try to cool it off but it doesn't really work ,
and there are no applications runnig at the back except the default ones example - phone , browser , bbm and messages .
and the weird thing is that when i switch off the mobile network the the battery stops draining
can someone please help i really need my emails,bbm and whatsapp back
Solved!
Go to Solution.Hi and Welcome to the Community!
Given your description, I'd deduce low/poor signal from your mobile service provider. Digital devices modulate their power consumption depending on the strength of signal they receive from the carrier tower. Lower signal strength/quality, higher battery drain. To firmly check that, you need to contact your mobile service provider as it's there network that is the cause. It is possible that they have some problems in the areas you are in.
You could also attempt to boot into Safe Mode, so as to suppress all 3rd party apps from auto-launching (even if you don't see them in the AppSwitcher ribbon, they can be running):
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Blackberry curve 9220/restarting simultaneously
I have to register complaint that when I turned on the mobile data in my phone,it restart simultaneously also in the time of attending call.my friend aslo facing this same problem.some times at the time of turnig on mobile data it restatrs
hp saya rusak
-
Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.
ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3." -
The other day I opened firefox after the latest update in September. Firefox then closes and then i get logged off and vista(32 bit) restarts. I get back to login and when I try to login it gives me the blue screen and restarts again with the selection screen (start in safe mode....)I was able to login on safe mode and then on admin afterwards. Thinking the problem was just an error I went back and opened firefox on my account and the loop started again. I was forced to remove firefox but I want ti back and I want to know how this can be fixed so I can put it back on my computer.
See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it
-
The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.
-
I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran. -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
Author's note: because I'm not yet allowed to post links in the forums, please note that all links have
dot for the actual . in links, and any "http://" is spaced out so things don't appear as links. Common sense, folks.
I found the answer here: http:// wwwdoteightforumsdotcom/tutorials/13200-windows-8-upgrade-iso-redownload.html,
but here's the brief summary:
-I'm guessing that at some point, you probably downloaded the Windows 8 preview, yes? For whatever reason, when you go to do it "for real," the Windows 8 setup doesn't overwrite the old file, called the "WebSetup"
folder. If that folder is still there, you'll get the "Sorry, something happened and we couldn't finish creating the ISO. Restart setup and try again" message.
The location of the folder is at: C:\%UserProfile%\AppData\Local\Microsoft\WebSetup
where %UserProfile% is the user account you downloaded it under (probably your default account) - this is the folder you need to delete.
Once that folder is deleted, run the Windows 8 setup file (found here: http:// windowsdotmicrosoftdotcom/en-US/windows-8/upgrade-product-key-only if
you haven't, like me, already downloaded it 8 different times thinking it was a corrupted file), and it should prompt you at that point for your product key - which is something it wasn't doing for me. After that, you can choose to make it an ISO, run
it normally, run it from USB, etc.
It'd be helpful if Microsoft knew about this... hope it helps...
(h/t to EightForums, where I originally found and condensed this guide.)Author's note: because I'm not yet allowed to post links in the forums, please note that all links have
dot for the actual . in links, and any "http://" is spaced out so things don't appear as links. Common sense, folks.
I found the answer here: http:// wwwdoteightforumsdotcom/tutorials/13200-windows-8-upgrade-iso-redownload.html,
but here's the brief summary:
-I'm guessing that at some point, you probably downloaded the Windows 8 preview, yes? For whatever reason, when you go to do it "for real," the Windows 8 setup doesn't overwrite the old file, called the "WebSetup"
folder. If that folder is still there, you'll get the "Sorry, something happened and we couldn't finish creating the ISO. Restart setup and try again" message.
The location of the folder is at: C:\%UserProfile%\AppData\Local\Microsoft\WebSetup
where %UserProfile% is the user account you downloaded it under (probably your default account) - this is the folder you need to delete.
Once that folder is deleted, run the Windows 8 setup file (found here: http:// windowsdotmicrosoftdotcom/en-US/windows-8/upgrade-product-key-only if
you haven't, like me, already downloaded it 8 different times thinking it was a corrupted file), and it should prompt you at that point for your product key - which is something it wasn't doing for me. After that, you can choose to make it an ISO, run
it normally, run it from USB, etc.
It'd be helpful if Microsoft knew about this... hope it helps...
(h/t to EightForums, where I originally found and condensed this guide.)
Worked like a charm. Thank you! -
i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME
Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
What's wrong with my ipad2? I just can't bear it always restart again and again when I just play a simple game! What's wrong with the apple without Jobs?!
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. -
All of a sudden I keep getting message that my computer must be restarted and it freezes. I restart it and within minutes it happens again. This is a 27 inch iMac with latest system and software. Any ideas of what is wrong and how to fix it?
10.7.5 is not the latest system, 10.8.3 is. However your message sounds like a Kernel Panic, does the message look similar to About "You need to restart your computer" (kernel panic) messages? If so, then if you can get the machine to restart normally then please post the Kernel Panic Report which you can find by following directions in How to log a kernel panic. Please post back with the KP log, and we can take a look. However if the machine continues to not restart then my guess is a hardware failure suck as a hard disk or failed RAM in which case you should take it into your local Apple Store or AASP for repair.
-
I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!
Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao. -
My ipod is restarting again and again with a crack like sound
I have a iPod Classic. Few days ago i was listening music and i noticed that the power suddenly reaches to half. After few second it was just about to empty. And after few second my iPod turned off and restarted again but not completely. When ever it starts it suddent turns off with crack like sound. I just let it to drain off the battery for a whole one day. Next when i started it , it showed me a display of "Connect To Power" when i connected it, it followed the same routine as it was showing earlier . I waited for some time and eventually it showed me display of "Reset you iPod Through iTunes". i reseted it twice and now the it is starting and turning off agagin and again....... Plz help......!!!!!!
Its happening to me too. I was just on Instagram when all of a sudden the screen went to white for a second then shut off. I didnt touch anything on my iPod and it showed the apple logo. I thought it was turning itself back on, but the white screen popped up again and it turned off. It has repeatedly been doing this for a while and nothing is helping.
Maybe you are looking for
-
PSE 8.0 (Mac) Trial Version, no selection for Slideshow.
I select photos in Bridge then click on Create, there appears to be selections for Web Photo Gallery and for PDF Slideshow but no selection for plain ordinary Slideshow. Did Adobe eliminate the plain jane Slideshow from this version? Regards, Bob
-
Hi, I have made a series of ascii-drawings as illustrations for a story book. This is very font sensitive and the font that I am using is "Courier". An example is shown below. ~V~ ~V~
-
Vendor Balane is not tally with the Reconcilation Account
Hi to all.. When i am checking vendor reconcialtion account T,code S_alr_87012082 For eg my reconcilation account no is 100000, and ia m checking in Fs10n Gl balance its not matching some differance is there. But it should match .. pls guide me
-
Mail from Workflow to external system with mail text in body of mail
Hi All, I have extended workflow WS12300111 to send mail to external system. But in external system mail text is coming in attachment & without formating (Multiple lines are coming in single Row). I want to know how to send text in body of mail (inst
-
I set up airport wifi with a WEP password, but it never asks for the password and anyone can enter my network...what to do?