Custom adapter module throwing exception
Hi,
We have written an adapter module (EJB) to convert a file structure into XML for conversion in XI. Using file adapter(FTP), we are getting the files converted into XML without any problem. However, when there is no file in the directory the module is throwing an exception and writing an entry into the log (polling interval is 1 minute).
The requirement is when there is no file in the directory, the adapter should keep on polling, but without generating any exception or making an entry in the log.
Can anyone help out with this please?
strange...
if a file is not found in the specified directory where your file adapter is polling, it is not possible that the control comes to the adapter module you have specified in the module chain.
have you done something unusual in your CC config i.e. added only your module in the module chain and removed CallSAPAdapter
Similar Messages
-
Unable to deploy custom adapter module in PI 7.31
Hi pros,
I created a custom adapter module to split some complex input files to multiple messages. We use a SAP PO 7.31 java-only installation. I followed this document to create my adapter module:
How to Create Modules for the JEE Adapter Engine
I know it is for PI 7.1 but a colleague of mine said that he was able to create a running adapter module for PI 7.3 following the guide. I created the following projects:
EAR project references the EJB project:
Project facet of the EJBproject:
ejb-jar.xml config:
application-j2ee-engine.xml (in EAR project):
When I try to deploy my module, I get the following error:
Java version:
NWDS version:
Any hint is appreciated! What can be wrong? What can I check again?
THANKS!
Message was edited by: Stefan MünchowI am not sure if the version is the problem. We have PI 7.31, support package 14, patch level 0 and NWDS 7.31 support package 12, patch level 4. The version of NWDS is lower than the version of the PI. According to Note 1599298 the error occurs when the NWDS is higher than the one of PI. Besides, we are able to deploy BPMN processes with the same NWDS to the same server.
This is the exact exception trace shown in NWDS:
com.sap.ide.eclipse.sdm.deploy.DeploymentException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:110)
------------- Nested exception -------------------
com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:862)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.ide.eclipse.deployer.dc.deploy.DeployProcessor70.deploy(DeployProcessor70.java:105)
at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:80)
Caused by: com.sap.engine.services.dc.cm.deploy.DeploymentException: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:246)
at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:67)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:282)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:84)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:100)
at com.sap.engine.services.dc.cm.deploy.impl.DeployThread.run(DeployThread.java:39)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3298] Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:167)
at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:138)
at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:57)
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:213)
... 8 more
Caused by: com.sap.engine.services.deploy.server.utils.DSRemoteException: ASJ.dpl_ds.006193 Operation [deploy] of [/usr/sap/DP2/J64/j2ee/cluster/server0/temp/tc~bl~deploy_controller/archives/213/SplitArticleFileModule_EAR.ear] failed
at com.sap.engine.services.deploy.server.DeployServiceImpl.catchDeploymentExceptionWithDSRem(DeployServiceImpl.java:3370)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:315)
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:139)
... 11 more
Caused by: com.sap.engine.services.deploy.container.rtgen.GenerationException: Open failed for '/usr/sap/DP2/J64/j2ee/cluster/server0/temp/deploy/SplitArticleFileModule_EAR.ear1422275742985/com.sap.aii.utilxi.server.jar' with fd 218 returning message 'couldn't find 'END' tag' and errno 0 after trying cache.
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.createSingleModule(WebServicesGenerator.java:100)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.generate(WebServicesGenerator.java:54)
at com.sap.engine.services.deploy.container.rtgen.AnnotationsSupportingGenerator.generate(AnnotationsSupportingGenerator.java:27)
at com.sap.engine.services.deploy.ear.jar.moduledetect.GeneratorWrapper.generate(GeneratorWrapper.java:43)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generate(ModuleGeneratorTool.java:110)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generateOverExistingModules(ModuleGeneratorTool.java:97)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generateModules(ModuleGeneratorTool.java:80)
at com.sap.engine.services.deploy.ear.jar.EARReader.read(EARReader.java:240)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.prepareNewDeploymentInfo(DeployUtilTransaction.java:217)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:199)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:473)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1836)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:360)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:313)
... 12 more
Caused by: java.util.zip.ZipException: Open failed for '/usr/sap/DP2/J64/j2ee/cluster/server0/temp/deploy/SplitArticleFileModule_EAR.ear1422275742985/com.sap.aii.utilxi.server.jar' with fd 218 returning message 'couldn't find 'END' tag' and errno 0 after trying cache.
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:154)
at java.util.jar.JarFile.<init>(JarFile.java:141)
at java.util.jar.JarFile.<init>(JarFile.java:105)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesSupportHandlerImpl.generateWebSupport(WebServicesSupportHandlerImpl.java:79)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.createSingleModule(WebServicesGenerator.java:69)
... 26 more
Maybe the used jar files could be the problem? -
Custom adapter module deployment in PI 7.1
We upgrade XI 3.0 to PI 7.1. However, I dont see SDM directory anymore which is what I had used to deploy my custom adapter module.
Is there a different way to deploy custom adapter module in 7.1? Is SDM discontinued?
When I try to deploy the ear file from NWDS directly I get deployment exception error
"Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !".
I have given the message server host and port correctly in preferences.
I am using NWDS 7 and JAVA SDK 1.4.2.15.
Is there a new procedure to deploy custom adapters in PI 7.1?
Regards
Haseebhi,
check this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00838345-708c-2a10-1199-9514c0b0a91c
regards. -
SAP PI crashes because of Custom Adapter module
Hi,
We are facing a strange problem. We have deployed a custom adapter module developed in java which accesses a Hardware Security Module(HSM) and uses the keys in HSM to digitally sign our data. Now, when I use particular methods in this code and deploy it on PI server, the server crashes while testing this out. As soon as I run the channel having this adapter module, PI server becomes unavailable. It restarts on its own after a few minutes.
One of the reasons I identified to be causing this issue is the signing mechanism used in code. When I used a mechanism that was not supported or not correct, it crashed the server. If i corrected it, it worked fine. I found no other thing in my code causing this behaviour apart from this mechanism. But I am still not able to understand how a single method in a code can cause the whole server to crash. Has anybody here faced such a problem? Any pointers would be appreciated.
We are using SAP PI 7.31 java only installation.
Thanks,
Ravi DesaiHi Ravi
1. To check if it is a memory issue. Once you start the channel, check the memory usage in nwa. Check if the memory is increasing once the channel is started.
2. Add debug statements to print logs in default traces at as many places as possible. Since your code is not reaching the Catch block, using the debug statement you can reach the line in the code which is causing this issue.
Regards
Osman Jabri -
I'm developing one customer adapter module that calls stored procedure on sender side. I'm not able to stop process when Resultset is empty. As interface is firing every 60s, it is happening quite often and I want to avoid this, like std. JDBC adapter does. How to get this?
kr
mario
p.s: there should be some documentation on PI server regarding development customer modules, and I've found ONLY compiled Java classes not the source code. Any idea?Mario,
Its Adapter that calls the Module and it is not true other way around so you can't stop adapter through Module.
In your module code you can write a code in such a way that it forms just a header(or anything you wish to) and send it further.
In Receiver determination you can put a condition if certain node doesn't exist (in case of Result Set returns empty) then End the message (with or without error notification).
Thanks,
Sunil Singh -
Code to retrive the sender and receiver interface names using custome adapter module
Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM -
hi all,
I am doing a POC on exploring custom adapter modules. Can anyone please help me in understanding various possible uses of adapter module?
I already know about creating PDF file, Reading/Writing Excel file, Encode/Decode, setting FileName, Sending attachment through Mail Adapter. Any other possible use of adapter module?
Thanks,
Mayankhi Jyothi,
Now i am getting following error:
Error jxl.read.biff.BiffException: Unable to recognize OLE stream
My lines of code are:
System.out.println("01");
FileInputStream fis = new FileInputStream("C:
Documents and Settings
Mayank
Desktop
mayank1.xls");
System.out.println("001");
String str = fis.toString();
System.out.println("0001");
byte src [] = str.getBytes();
System.out.println("00001");
ByteArrayInputStream f5 = new ByteArrayInputStream(src);
System.out.println("000001");
Workbook workbook1 = Workbook.getWorkbook(f5);
System.out.println("000002");
i am using lines because i will be converting xmlpayload to bytestream in actual module code.
And output i am getting is:
01
001
0001
00001
000001
Error jxl.read.biff.BiffException: Unable to recognize OLE stream
which means there is some problem in line
Workbook workbook1 = Workbook.getWorkbook(f5);
Also when i am reading file using:
Workbook workbook = Workbook.getWorkbook(new FileInputStream("C:
Documents and Settings
Mayank
Desktop
mayank1.xls")); ,, it's working.
Thanks,
Mayank -
Get Message details in custom adapter module
Hello,
Could you please let me know how can we retrieve following parameters in custom adapter module?
Message size
Message Mapping name
Operation Mapping name
Sender and Receiver Interface names
Thanks!
Regards,
ShwetaHi Shweta
Not all the information is available directly from the adapter module.
Message size
Retrieve the input stream of the payload, convert the stream to bytes and count the bytes length.
Message msg = (Message) inputModuleData.getPrincipalData();
XMLPayload payload = msg.getDocument();
InputStream inStr = payload.getInputStream();
// Convert inStream to bytes
int size = bytes.length;
Sender and Receiver interface names
You can only get Sender interface in sender module, and receiver interface in receiver module. You can get the from the getAction() method.
Message msg = (Message) inputModuleData.getPrincipalData();
String interfaceName = msg.getAction().getName();
Operation Mapping name
This is not directly available from the Adapter Framework. One workaround is to access this via the Integration Directory API. With the Interface Determination Service API, you can read the Interface Determination object to get the associated mapping. To do this you have to make a SOAP call to the API.
Message Mapping name
I'm not sure how this can be retrieved as this is only available in ESR.
If the module is on the receiver side, another option is to extract the information during mapping and store it into Dynamic Configuration, then in the receiver module, to extract it from Dynamic Configuration.
Rgds
Eng Swee -
Custom XSLT Functions Throw Exception
Hi,
I have following requirement-
1. I have defined and configured some custom XSLT functions in Jdev and BPEL, which throw exception in case of an error.
2. Now I want to catch that exception in my BPEL process
3. In My BPEL process I have defined transformation step ( which is using those Custom XSLT functions) in a scope and added a catch branch to that
4. But even XSLT java function throw an exception , it is not being catch by catch branch.
Could you please help me regarding this and tell me any other way to catch an exception in BPEL process thrown by Custom XSLT function within transformation step?
Thanks.Hi,
Its the problem with the date. In the configuration file i used dateTime for java.util.Date, because of this i cant see "User Defined" option in Jdeveloper component pallete. I checked at XML data types i had seen dateTime for java.util.Date Class, but its not working.
Do anyone created a custom xslt function which has date as parameter or return type?, If so wht they had used as data type for xml and java.
Thanks,
RR -
Required JAR's for developing custom adapter modules for PI 7.31 SP 09
Hello experts,
I have a new development wherein i have to consume .xlsx files in PI 7.31
i have gone through a lot of blogs but did not find any relevant JAR's specially for PI 7.31, I am planning to go for custom module development for conversion of .xlsx file into xml
so need your help for finding the JAR's for PI 7.31 and also some custom JAVA source code for conversion of excel spreadsheet into XML.
Regards,
Sushant.ShindeHi sushant,
The module key seems correct ffor you. But the blog you shared is cozy. I developed 4 adapter modules using a document. Please refer that.
And NWDS EHP1 is available you can use that to be perfectly sure on compatibility.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true
use the above document to verify the steps you followed-
Please provide following screenshots
NWA->configuration->infrastructure->Application Modules-> and search for *xlmodule*
if you find your module then click on it and at the bottom there will be a window with JNDI Name. Share that JNDI name and use that JNDI name in your Module. (localejbs/JNDIName).
Also go to NWA->TroubleShooting-> JNDI Browser and see where is your Adapter module situated. I mean under which directory. Either directly inside root/localejbs/ or root/localejbs/sap.com.
Please verify your steps according to that and redeploy and share result.
and Go to NWA- Site Map-> find Start & Stop
In that go to Java Applicaitons Tab and search for your module. It must be started. If it is stopped try starting it.
Regards,
Vikas -
Custom Indirection Container throwing exception in constructor
Hi I've following the how-to and implemented my own custom indirection container. However, when reading an object from the database I'm getting the following exception. I'm guessing that it could be related to having null references stored as 0 in id columns. Any help would be greatly appreciated.
Thanks,
Jon
Exception thrown in main Exception [TOPLINK-152] (OracleAS TopLink - 10g (9.0.4.8) (Build 050712)):
oracle.toplink.exceptions.DescriptorException
Exception Description: The operation [buildContainer constructor (null) Failed: java.lang.NullPointe
rException] is invalid for this indirection policy [oracle.toplink.internal.indirection.ContainerInd
irectionPolicy@cc0e01].
Mapping: oracle.toplink.mappings.OneToOneMapping[ryFromMail]
Descriptor: Descriptor(com.peoplesoft.crm.omk.design.PsRyedocVar --> [DatabaseTable(PS_RYEDOC_VAR)])
Local Exception Stack:
Exception [TOPLINK-152] (OracleAS TopLink - 10g (9.0.4.8) (Build 050712)): oracle.toplink.exceptions
.DescriptorException
Exception Description: The operation [buildContainer constructor (null) Failed: java.lang.NullPointe
rException] is invalid for this indirection policy [oracle.toplink.internal.indirection.ContainerInd
irectionPolicy@cc0e01].
Mapping: oracle.toplink.mappings.OneToOneMapping[ryFromMail]
Descriptor: Descriptor(com.peoplesoft.crm.omk.design.PsRyedocVar --> [DatabaseTable(PS_RYEDOC_VAR)])
at oracle.toplink.exceptions.DescriptorException.invalidIndirectionPolicyOperation(Descripto
rException.java:669)
at oracle.toplink.internal.indirection.ContainerIndirectionPolicy.buildContainer(ContainerIn
directionPolicy.java:62)
at oracle.toplink.internal.indirection.ContainerIndirectionPolicy.valueFromQuery(ContainerIn
directionPolicy.java:254)
at oracle.toplink.mappings.ForeignReferenceMapping.valueFromRow(ForeignReferenceMapping.java
:898)
at oracle.toplink.mappings.OneToOneMapping.valueFromRow(OneToOneMapping.java:1302)
at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:876)
at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder
.java:164)
at oracle.toplink.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:322)
at oracle.toplink.queryframework.ObjectLevelReadQuery.buildObject(ObjectLevelReadQuery.java:
242)
at oracle.toplink.queryframework.ReadObjectQuery.execute(ReadObjectQuery.java:368)
at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:510)
at oracle.toplink.queryframework.ReadQuery.execute(ReadQuery.java:125)
at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:1962)
at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1086)
at oracle.toplink.internal.indirection.NoIndirectionPolicy.valueFromQuery(NoIndirectionPolic
y.java:254)
at oracle.toplink.mappings.ForeignReferenceMapping.valueFromRow(ForeignReferenceMapping.java
:898)
at oracle.toplink.mappings.OneToOneMapping.valueFromRow(OneToOneMapping.java:1302)
at oracle.toplink.mappings.DatabaseMapping.readFromRowIntoObject(DatabaseMapping.java:876)
at oracle.toplink.internal.descriptors.ObjectBuilder.buildAttributesIntoObject(ObjectBuilder
.java:164)
at oracle.toplink.internal.descriptors.ObjectBuilder.buildObject(ObjectBuilder.java:322)
at oracle.toplink.queryframework.ObjectLevelReadQuery.buildObject(ObjectLevelReadQuery.java:
242)
at oracle.toplink.queryframework.ReadObjectQuery.execute(ReadObjectQuery.java:368)Clients of your class might not like you throwing
exceptions from the ctor. If they're checked
exceptions it'll mean try/catch blocks. If there are
LOTS of checked exceptions that'll mean lots of catch
blocks. Could get messy fast. You could catch in the
ctor and wrap in a subclass of
java.lang.RuntimeException. Those are unchecked, like
java.lang.IllegalArgumentException.I would strongly advise against making your checked exceptions unchecked just so that the caller's code will compile without try/catch blocks. Either way--checked or unchecked--if I do Foo foo = new Foo();
foo.doStuff(); I won't get to doStuff() if the ctor threw an exception.
You'd throw unchecked exceptions in those cases where it's appropriate--e.g., the caller passed you invalid args (bad code on the caller's part, appropriated for unchecked exception), or the VM couldn't get enough memory to create your object (probably not something the caller can do anything about, so, again, appropriate for unchecked).
But if, for example, he's passing you database login parameters that an end user provided, and the password is wrong or the host is unreachable, then you'd want to throw a checked exception, because it's not bad code on the caller's part, and there might be something he can do to recover.
Note that the example of the incorrect password above is quite different from the "invalid args" example in the previous paragraph. Your method would throw IllegalArgumentException if the caller passed args that violate your method's precondition--e..g. lie outside some range of numbers. That is, it's a value that your method simply can't use. A bad password for a db login, on the other hand, is legal as far as your method is concerned, it just failed authentication in the db.
@%: I know you're aware of the proper use of checked/unchecked exceptions, but the way you worded you post kind of sounded like you were saying, "just use unchecked if you find the caller has too many try statements."
¶ -
Custom function module raises exception CX_SY_NO_HANDLER
Hi there!
Does any one here know what this exception is?
CX_SY_NO_HANDLER
It is raised when I try to call a custom function module within a rule routine in a transformation.
I've checked the input and output parameters and they're consistent.
Thanks in advance for any help!
Best Regards,
Luís Andrade.Siggi!!
First of all, let me tell you that I am a great fan of yours! I have learned a great deal from your posts about function modules and extractors.
The note you referred is not applicable in my case, since we're running sp14.
One thing I forgot to mention was that this FM is a copy of another FM, with minor modifications. I'm going to try to create a brand-new FM and paste the code in it.
Best Regards,
Luís Andrade. -
File adapter (sender) module throws exception, but adapter proceeds again
Hello dear reader,
I wrote a module that converts a flat file into XI-XML and tested it within the file adapter. It works fine so far. But if I force the module to throw an exception to handle an erroneous flat file, the file adapter tries to proceed the erroneous file again and again. Not very nice, isn´t it?
Has anybody an idea, how to configure the file adapter to stop the processing of an erroneous file?
Thank you in advance
Yours
Frank WaskowHello Satish,
the weblog doesn´t describe my problem correctly. Let me show you the Audit Log from the Messeage Display Tool of the Adapter Engine:
Audit Log for Message: 06ff54a0-a258-11db-b9e2-003048226013
Time Stamp Status Description
2007-01-12 16:14:49 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:14:50 Error Attempt to process file failed with null
2007-01-12 16:15:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:15:00 Error Attempt to process file failed with null
2007-01-12 16:16:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:16:00 Error Attempt to process file failed with null
2007-01-12 16:17:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:17:00 Error Attempt to process file failed with null
2007-01-12 16:18:00 Success Send text file "Invoice_error_wf.edi" from FTP server "HH-168:/XI_Infotag_Testdaten/EDIX/In", size 27993 bytes with QoS EO
2007-01-12 16:18:00 Error Attempt to process file failed with null
It seems to me that the Adapter gets the error of the module, but it is not handled as an error like shown in the blog <a href="/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically:///people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically.
The adapter tries to proceed the same file again and again, till I delete it from the source directory.
Any more idea?
Frank -
Addition of a header line to a flat file using Custom Adapter Module?
Is the header that you want to add to the input file always a constant?
In that case why go for a module. Directly map the required constants during the mapping to your IDoc.
My suggestion is to avoid the moduleHi Shabrish,
The Header is not a constant field always as the value changes per file adapter so a module will be helpful, and it will be a must to add the Header record as the first line.
Can you suggest/direct me to some appropriate blogs? Thanks
Regards,
Nipun -
Groupwise Custom Field Creation throws exception
Hi,
When I am trying to create a new field definition (String type) using the object API (8.0.1)(gwoapi_800.h), I got the following exception
System Message #1: "An error occurred in allocating memory.", System Message #2: "Error Message: "Exception occurred.", Source "FieldDefinitions.Object"",
IGWFieldDefinitionPtr pDIGWFieldDefinitions;
pIGWFieldDefinitions->Add()
Is this a known API issue?
Thanks.I put a fix to 8.0.3 and the next major release
or GroupWise. The problem was there is a custom
field table that gets created. If the user had
no custom fields, there was a problem creating
the first custom field.
You can get around the problem (until the fix
is available) by first creating a custom field
using the GW Client.
Preston
>>> On Tuesday, June 15, 2010 at 1:28 PM, Preston
Stephenson<[email protected]> wrote:
> I created a bug to investigate the issue.
> I'll get to it when time permits.
>
> Thanks.
> Preston
>
>>>> On Tuesday, June 15, 2010 at 12:46 PM,
> pranov2001<pranov2001@no‑mx.forums.novell.com> wrote:
>
>> Preston
>> Thanks a lot for your response. Here is the snapshot of the code that I
>> am trying to achieve.
>>
>> _COM_SMARTPTR_TYPEDEF(DIGWAddressBooks, DIID_DIGWAddressBooks);
>> _COM_SMARTPTR_TYPEDEF(IGWAddressBooks2, IID_IGWAddressBooks2);
>> _COM_SMARTPTR_TYPEDEF(IGWAccount4, IID_IGWAccount4);
>> _COM_SMARTPTR_TYPEDEF(DIGWCAddressBook, DIID_DIGWCAddressBook);
>> _COM_SMARTPTR_TYPEDEF(IGWCAddressBook2, IID_IGWCAddressBook2);
>>
>> _COM_SMARTPTR_TYPEDEF(DIGWFieldDefinitions,IID_DIG WFieldDefinitions);
>> _COM_SMARTPTR_TYPEDEF(IGWFieldDefinitions,
>> IID_IGWFieldDefinitions);
>> _COM_SMARTPTR_TYPEDEF(DIGWFieldDefinition,
>> DIID_DIGWFieldDefinition);
>>
>> DIGWAddressBooksPtr pDIGWAddressBooks;
>> IGWAddressBooks2Ptr pIGWAddressBooks;
>> IGWAccount4Ptr pIGWAccount;
>> LPCTSTR AddrBookName = _T("Test Contacts");
>> CComVariant vName(AddrBookName);
>> DIGWCAddressBookPtr pDIGWCAddressBook;
>> HRESULT hr;
>> DIGWFieldDefinitionsPtr pDIGWFieldDefinitions;
>> IGWFieldDefinitionsPtr pIGWFieldDefinitions;
>> DIGWFieldDefinitionPtr pDIGWFieldDefinition;
>> IGWCAddressBook2Ptr pIGWCAddressBook;
>> LPCTSTR FieldName = _T("AliasName");
>>
>> //Opening an Addressbook
>> pIGWAccount‑>get_AddressBooks(&pDIGWAddressBooks );
>>
>>
>
pDIGWAddressBooks‑>QueryInterface(IID_IGWAddress Books2,((LPVOID*)&pIGWAddr
> essBo
>> oks));
>> hr = pIGWAddressBooks‑>Item(vName, &pDIGWCAddressBook);
>> if (hr>=0)
>>
>>
>
pDIGWCAddressBook‑>QueryInterface(IID_IGWCAddres sBook2,((LPVOID*)&pIGWCAdd
> ressB
>> ook));
>>
>> //Adding the field to the Addressbook
>> pIGWCAddressBook‑>get_FieldDefinitions(&pDIGWFie ldDefinitions);
>>
>>
>
pDIGWFieldDefinitions‑>QueryInterface(IID_IGWFie ldDefinitions,((LPVOID*)&p
> IGWFi
>> eldDefinitions));
>> _bstr_t btFieldName(FieldName);
>> pIGWFieldDefinitions‑>Add(btFieldName, 1, &pDIGWFieldDefinition);
>>
>> The interesting fact is, it works in one worstation and not in other,
>> even if there is no OS or Groupwise client version difference between
>> those workstations.
>>
>> Preston Stephenson;1987092 Wrote:
>>> The error is reporting something missing.
>>> Can you support more of your code that you
>>> are trying to use?
>>> A small test app would be even better.
>>>
>>> Thanks.
>>> Preston
>>>
>>> >>> On Thursday, June 10, 2010 at 3:26 PM,
>>> pranov2001<pranov2001@no‑mx.forums.novell.com> wrote:
>>>
>>> > Hi,
>>> >
>>> > When I am trying to create a new field definition (String type)
>>> using
>>> > the object API (8.0.1)(gwoapi_800.h), I got the following exception
>>> >
>>> > System Message #1: "An error occurred in allocating memory.", System
>>> > Message #2: "Error Message: "Exception occurred.", Source
>>> > "FieldDefinitions.Object"",
>>> >
>>> > IGWFieldDefinitionPtr pDIGWFieldDefinitions;
>>> > ....
>>> > pIGWFieldDefinitions‑>Add()
>>> >
>>> > Is this a known API issue?
>>> >
>>> > Thanks.
Maybe you are looking for
-
How do I turn off computer monitor when watching DVD movie on TV monitor?
I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This c
-
How to restore iMovie 10 events & projects from Time Machine?
Here is the scenario I am facing: I completed some projects and then moved those events & projects to an external HD that subsequently died. The question I have is how can I tap into Time Capsule's history to restore the events and projects I moved
-
How do I acquire multiple channels with NIDAQmxBase?
Sorry for the double post, I just thought my previous message subject looked more like a tutorial rather than a question. My question is the same, I am looking to acquire more than 2 channels worth of data using C++ and NIDAQmxBase. I have tried init
-
Problem of editing in BC with a Muse site
I published a web site for a client in Business catalyst. The site is create with Muse. We can edit the site and all the elment in business catalyst but when we want to publish we have this message "Erreur Error occured while saving the page.". It is
-
How can I automatically crop a photo based on its content (a black border)?
I scanned hundred of negatives. The scanner produced .jpg files. Most of the scanned images show the negatives holder to one side as a black border. The black border is thicker or thinner depending on the photo. Please see pictures attached. Is th