Custom Configuration options for new U430

I would like to buy U430 laptop, but I don't see how I can configure options like CPU, Memory Size etc...
I just have an option to select a model and no way to customize it. Here is the page I go to:
http://shop.lenovo.com/us/en/laptops/ideapad/u-series/u430-touch
I tried several other types like YOGA, but don't see any configuration options also.
Am I missing something, or you can't build Custom Lenovo Laptop any more?

Hello mag20, welcome to this forum.
     Yes, you can build a Custom Lenovo Laptop. However, you need to call, or chat on line, with the sales team. The website has some customization options for their ThinkPads, which you can do on line. For example, see the T440s page:
http://shop.lenovo.com/us/en/laptops/thinkpad/t-series/t440s/
      If you want a U430 Touch, it would be better to know what possible options are available in that system, before you call, or chat. The best way to know this, is to read the part list, in the Hardware Maintenance Manual (HMM). Here is the HMM for the U430 Touch:
http://download.lenovo.com/consumer/mobiles_pub/lenovo_u330p_u330%20touch_u430p_u430%20touch_hmm.pdf
     Page down to Table 5, Parts List - Overall, on page 69. Part No. 4 is the RAM, 6 is the processor, 7 is the hard drive, 10 is the SSD, 12 is the WLAN.
     Be aware, that not all options, are congruent with some of the other options, that you may want. i.e. I don't think you can have both a hard drive, and a 256 GB SSD, but I don't know. You probably can get the drive, and a 24GB NGFF SSD, as that goes in a different slot. That's why you need to chat/talk with a sales rep.
      Keep in mind that if you custom order a Laptop, it may be more expensive than "standard on line model", but the reps have a certain amount of latitude, and you can still get a good "deal" .
     You may need to wait a little longer for it to be built, and shipped. The upside of this process is, you get the laptop you really want, with the configuration you need!
     Happy shopping!
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Similar Messages

[svn:bz-trunk] 9713: Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.

Revision: 9713
Author:   [email protected]
Date:     2009-08-27 14:09:43 -0700 (Thu, 27 Aug 2009)
Log Message:
Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.
QA: Yes
Doc: Yes - We have a new include-read-only property, see resources/config/services-config.xml
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-427
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/AbstractEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/io/AbstractProxy.java
    blazeds/trunk/modules/core/src/flex/messaging/io/SerializationContext.java
    blazeds/trunk/resources/config/services-config.xml

In microsoft office word, how do I delete items from the recent documents tableau? I have options for new, open, save, save as, etc. but no option to delete.

In microsoft office word, how do I delete items from the recent documents tableau? I have options for new, open, save, saveas, etc. but no option to delete. Thank you.

Hello.
I have no idea and you should contact Microsoft for support. This is Firefox's support forum.
Thank you for your understanding.

[svn:bz-trunk] 13622: Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.

Revision: 13622
Revision: 13622
Author:   [email protected]
Date:     2010-01-19 02:38:36 -0800 (Tue, 19 Jan 2010)
Log Message:
Bug: BLZ-427 - Add configuration option for BeanProxy#includeReadOnly property.
QA: No
Doc: No
Details: Documented the fact that include-read-only property applies globally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-427
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Customer master report for new and changed customer

Hi All,
I want to write a report for customer master, If a new customer is created or if customer is changed the report should get the customer and download it to a flat file.
There is no proper spec they want customer based on acount group,Here how i can find the customer is newly created or changed. Change pointer is active.
in table CDHDR if customer is created the date and object id is there but changed the changed date is not in table kna1.
Please help me regarding the logic.
Thanks,
Arun.

Dear Arun,
Please check for the delta entries on the customer master tables in DBTABLOG.
This table stores all the changes made in database level.
Regards
imran.

NO CUSTOMER SERVICE OPTIONS FOR THE DEAF!

I have been trying to get information on the Visa gift card I was sent. I placed an order online with Staples. AFTER the order was placed, I received an email saying they apologize, but the tablet is not in stock. The CSR at Staples claimed that my Visa card was not charged. However, when I took a look, the money had, in fact, been removed from the account. I was told to call the number on the back of the card, which is what I did or TRIED TO DO. The relay operator dialed, listened all the way through, then came back and said THERE IS NO OPTION FOR A LIVE CUSTOMER SERVICE REPRESENTATIVE. None. Also, when you enter the requested information like the tracking number, etc. you get your current balance, then you are cut off.
This is the type of thing that I abhore about Verizon. I want to know why they still have that charge listed on the card! Why is it necessary for it to remain there forever? As long as it is listed, I CANNOT MAKE ANOTHER PURCHASE. The tablet I ordered was $330.00, which took up almost the entire balance of the $400 Visa card. How in the heck is a hearing impaired person supposed to get any help if you do not provide the necessary services? It's as if you seem to think WE DO NOT EXIST! Why tie up those funds for days and days so that nothing else can be ordered?
I pay my bill on time EVERY MONTH! If I said to you it would take 3-5 days for me to make the payment past the due day, would you wait before cutting off my service? I don't think so. So why would you tie up the funds on my card, because you can't keep the accounts up to date? How much longer do I have to wait?????

1. This is a peer-to-peer support forum. If you want to get a message to Verizon, you should contact them directly via one of the options on their Contact Us page.
2. I would assume the number on the card goes to a VISA support line, not Verizon. Verizon doesn't own the card, they just give them out.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Why no RAID options for new disks?

Hi support group,
"My name is Shaun, and I am a mac-aholic"
I inserted 4 new 3TB disks into the bays of my Mac Pro (2012), and there is no RAID option for them.
How I got here:
Inserted the WD Red drives, and they were not initiated.
I "erased" the drives, gave them names, and they appear in Disk Utility in grey drives.
Went to set up the RAID, and move the drives into the RAID, but got an error that they could not be used.
It appears to me that disk utility is not allowing me to fully use those drives. I Have created RAID drives before with no issue in RAID1 with 3TB drives before on this machine. Am perplexed, I thought this to be the easy and simple part of my upgrade odyssey! Did I screw up the initialization? On all FOUR drives?
Now, if I click on the drives, the RAID option does not present itself.
FWIW, I am using OS X 10.9.5, on Mac Pro 5,1. I boot from PCIe card. My end goal is to create a 4-disk RAID 10 using the four SATA connections on the MP.

It was really pretty simple based on your feedback, I powered down, removed the drives from the SATA backplane, moved each drive separately to the USB enclosure, then re-"erased" in OSX-Etended. I ejected each drive when finished, and moved to the next one until all four were re-"erased". Then I restarted the Mac with all four in the SATA connections, and all four were visible and had the RAID option tab. I created the three RAID schemes (two stripe and one mirror), and dragged the drives into the RAID option. Then I hit "create" or some other command to finish the RAID.
Note that I did get an error on the RAID creation. From memory, this was "cannot create RAID without an unmounted disk" or something like that. I cleared the error, and then opened back up Disk Utility. All the RAIDs were listed, and were operational with the green "On" signal. I could read/write/transfer from the RAID. Once I transfer the data to this RAID, I will work on a way to test it, but if any risk to the data, I might just leave well enough alone.
For now, it seems I have a fully functional RAID 1+0 using the four HDD on the SATA connections in my Mac Pro 5,1.

Office Web Apps - How do I get Excel and PowerPoint to show up as options for New Documents?

When I highlight a list of documents, a ribbon shows up at the top. The left most action is "New Document". Despite running and installing Excel and PowerPoint services, the only option that shows up is Word. How do I add Excel and PowerPoint to that list?
I have confirmed that I am able to upload, view and edit Excel and PowerPoint. I just cannot find a way to add them as options in New Document.

Create Content Types, same as in 2007.
In a nutshell... Create a content type based on Document and add a PowerPoint template. Go to the library and enable Content Types in Advanced. Add the new content type to the library's list of content types. The New button will now contain the name of this new content type.
Repeat for Excel.
More info:
http://msdn.microsoft.com/en-us/library/ms472236(office.14).aspxMike Smith
TechTrainingNotes.blogspot.com

External Fiber Channel Raid options for New Xserve besides Promise V-Trak

I was wondering if anyone out there knows if there is an alternate option for a External Raid that can be hooked up via 4gb Fiber Channel to my new Xserve. I am really looking for a more cost efficient one than the 12K Promise set up from Apple. My Technology vendor was telling me that you have to use the Promise Raid as it is the only one that a Xserve will control due to Apple's licensing of its drivers etc. for its Fiber channel. Something tells me that this is not true.
Anyone have any recomendations for a Fiber channel Raid solution in the 6K dollar range?
thanks,
Dan

Find another vendor. Anyone that tells you the Promise is the only RAID that will work clearly doesn't understand the market.
As for recommendations, you need to include some idea of capacity, either usable or raw. I can find you a lot of options for $6K if you want a 100GB of data. Not so many if you want 100TB.

Customizing Publish Options for Word Doc

Are there any additional publish customization options for Word doc? I checked the options available, and I didnt find any feature that allows you, for example, to manipulate slide images ( like, size and position), slide notes ( fonts and placement), etc. It takes so much time to reformat images and notes for each slide. Any suggestions?
Thanks,

The handout template is hard coded. But, working with the other templates and the Word Output document, I was able to create a template that will allow you to publish the Word images and slide notes in Word. And, you can customize the placement on the page and image sizes.
Here are instructions (I'm using Captivate 6 BTW):
1. Make all of your slide notes into closed captioning.
I was able to find the computer code to call the closed captions, but not the slide notes. So you have to drop some audio onto each slide (I'm using 1 second of silence generated in Audacity) and click the button that will turn your slide notes into closed captions. Don't worry...these won't display in your published project unless you have your skin set to display them.
2. Open a new Word document.
3. Copy and paste the script below into your Word document. This script as is will print 2 slides per page with slide notes above the images.
[CPDefaultItemTemplates[CPTemplates[TIMEBLOCK[CPContentInsert]TIMEBLOCK]CPTemplates]CPDefa ultItemTemplates]
[CPCapturedSlide
[CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates]
[CPSlideImage][size:282x214]
CPCapturedSlide]
[CPContentSlide
[CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates]
[CPSlideImage][size:282x214]
CPContentSlide]
4. Adjust the script to your liking:
1. Change the image size. This is set to 282 x 214. But you can change the image size to whatever you want it to be. If you make the size larger, fewer will fit on a page.
2. Move the slide notes, if you want. This is set to put the slide notes above the images. To put the notes below the images, move the [CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates] to below [CPSlideImage][size:282x214]. Be sure to move both instances, and don't copy/paste...move!
3. Use Word's formatting options to change the page display. For example, if you use Word to center the code about slide images, the slides will be centered on the page when you publish. You can add your company's logo in the header. Type CPMovieTitle into one place to print the project title...either header or footer. It won't work if you put it in more than one place for reasons known only to Captivate. You can put page numbers or dates in the footer. You can change the font for the slide notes by highlighting the notes code (see #3 above) and making it larger, smaller, different, bold, italic, etc., etc., etc. Whatever you would do with Word to format your handouts, do in this document.
4. Add anything that you want to print on every page outside the [ ] blocks. For instance, if you want to blank lines to print under the notes, you can add before the code for the images.
5. Save the Word document in .doc format with a memorable name where you can find it. You don't have to save with the templates in the Captivate program file.
6. Publish to Print. In the upper, right corner, in the Type section, click the button with ... It's to the right of Handout. That will open a window which will allow you to browse to find and select your Word document. The Layout Options won't do anything, so no need to mess with them. Set the rest of your settings...like project title and publish location and publish.
Things that I don't know, but would like to:
1. Will this work in Captivate 7? Will someone try and let us know?
2. Can you save the Word file in .docx format?
3. Can you set the Word doc to landscape instead of portrait? (I'll bet that you can, but haven't tried it.)
4. What Word options won't work? I know that you can't put this code inside a Word table. Using column and page breaks, I got mine to print with the slide notes on the left and images on the right. Other than that, who knows? Word is a big program, so you'll just have to test.
5. What is the code to call the slide notes? I've called Adobe support twice and can't get a straight answer. If we all start calling and emailing, maybe they'll tell us.
So, I hope this helps. There are so many threads about this and I can't repost everywhere. So, please link to this thread if you see another one where this info will help.
Happy printing!
Rebecca

Do we get to have our "Apple Configurator" updated for new features on iOS6?

I was wondering, if we get to have "Apple Configurator" would be updated for new features added on iOS6 devices.
Does anybody have any iead about that?
Eddie

Forgotten security questions - https://discussions.apple.com/message/18402551
More involved forgotten question issues - https://discussions.apple.com/thread/3961813

Options for new MacBook Pro 17"

I am considering upgrading to the new MacBook Pro. However, I hate the standard look and feel of the system compared to my current (all aluminum) MBP. In comparison, the system looks cheap and tacky.
Worse, the black glass monitor has so much glare in a side-by-side comparison to my current display, that it can be an eye strain to use. Can that glass front-plate be removed or an older style display be ordered?
The black keyboard also has a horrid cheap keyboard feel compared to my current MBP keyboard. Can the black plastic keys be replaced with the older style aluminum keys?
I really like the power and battery of the new system, but Apple appears to have -- for the first time in years -- taken a major step backwards in the usability and human factors of this new system compared to the one previous MBP model. I am greatly disappointed and VERY torn as to whether I should spend my money to get a more powerful, but much less usable system. If I could replace the display and keyboard with the older style, the upgrade would be a no-brainer.
So, are there any options available as to style of display and keyboard?
THANKS!
Jon K

' Whew! ... Er... Okay... Let me address your two primary and more specific concerns first:
' Regarding the screen: You're in luck - there is a Built-to-Order option for an "anti-glare" display which essentially gives you basically the same panel as the standard model, but ends up looking almost IDENTICAL to the previous (older) model aesthetically. In other words you get the aluminium bevel, no glass panel in front, and a matte-screen.
' The keyboard is another matter... As another poster mentioned there is no possible way for that to be changed due to the manner of construction. It is, however, really a non-issue to almost everyone that's spent some time with it! I've worked on the previous model's keyboard and honestly the newer keyboard is far more responsive and better for touch-typing die to the key-seperation etc. etc. Additionally, while it may take time to acclimatise, I honestly believe you'll come to prefer it aesthetically as well - the contrast to the rest of the box - all the aluminium - is quite pleasant! Methinks this is just a case of you being used to the system you've been using and struggling with the different look.
' Now... Moving on... I have to ask whether or not you've actually spent any time working with the new systems...? Honestly, while the older models were sturdy and had good build-quality etc. I genuinly feel that you can't compare the two - the Unibody MBPs are a cut-above - and one can feel it almost immediately once you actually work with them - opening and closing the clamshell, moving the system about, typing, adding and removing peripherals - the quality and sturdiness of these systems is unrivaled!
' Seriously - unless you have some strange attachment to the old Firewire 400 port (and assuming you get the anti-glare option considering your comments) - I cannot see you possibly being dissapointed with the Unibody 17-incher once you acclimatise!!!
' Anyways. My thoughts - given by an EXTREMELY picky person with ridiculously high standards.
' Looking forward to hearing back from ya!
~Menageryl
-Jack of All Trades, Master of Some!-

Promotions at configuration option for a configurable product

Is it possible to apply promotions to a specific configuration options in a Configurable Material?
For example, Material A is a configurable product. It has several configuration options with charges attached at configuration option (i.e. Characteristic value level) through variant conditions. Now if we want to give a promotional discount for a specific configuration option, Is it possible through standard SAP Promotions and Sales Deal functionality?
Base Price of Material A: $1000.00
Confuguration option X : $200.00
Promotion on configuration option X : 10% off of Config Option X charges (i.e. -$20)
Net Price of Material A with Config option X should then be:
$1000 + ($200 - $20) = $1000 + $180 = $1180
If it is possible to handle this kind of promotions in SAP ECC, please suggest the config steps involved to include variant condition type in the Promotions.
Thanks in advance
SCB
Edited by: Sreenivasa Bahudodda on Jan 19, 2009 1:25 AM

Hi,
Have you checked the downloaded knowledge bases in the CRM tables - COMM_CFGKB or COMM_SCEKB?
If you don't find the entries in one of the above tables (particularly in COMM_CFGKB), then you have an issue regarding the download of SCE.
Please let me know you answer, so that I will try to help you to solve the download issue
<b>
Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

Change dedicated meeting space options for new Lync Meetings

Is there a way to change the dedicated meeting space option to change "These people don't have to wait in the lobby" to Anyone? I know we can run set-csmeetingconfiguration on the global object, but this seems to change only new meeting
spaces not the dedicated meeting space?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Per my understanding, the purpose of dedicated meeting space keeps the same ID and permissions. Content, such as PowerPoint presentations or other files remain in the meeting until you delete them. It is option for informal meetings with
coworkers, which lets them sign in at any time with presenter permissions. There is no way to apply the option "These people don't have to wait in the lobby” for the dedicated meeting space. It’s by design.
Kent Huang
TechNet Community Support

Custom Configuration options for new U430

Similar Messages

Maybe you are looking for