Custom Field error in RPM

Hi All
I am trying to add a new custom field under the Item. I have done the following steps for the same.
1. Create Domain and Data Element.
2. Added this Data Element in structure CI_RPM_ITEM_ATT and activated the same.
3. Then i added the field into the Global Field Settings -> Define Custom Field Configuration as field needed questionnaire and also added under the UI configuration as read only field.
4. Added the field under 'Define Fields for dashboards'
5. Also added the field under 'Assign Field to Tab Pages'.
Now i am able to fill the questionnaire and the value of the field is being calculated correctly.
Field is also appearing in the dashboard for Item Dashboard.
But when i am trying to open the Item Overview, i am getting the following error.
"DataNodeInfo(ItemDetailsView.DynamicCustomFieldNode): unknown child node ZZ_XXXXXXX"
This custom field is also not showing up under the custom configuration for creating charts.
Thanks
Rajesh

Hi Rajesh,
Once custom fields are set up in the backend, you will have to restart the J2EE Engine.
Let me know if that helps.
Regards,
Vivek Pandey

Similar Messages

F-29 Customer field error.....

Hi Experts-
My Requirement is .......
In customer master data we have 4 customer groups like ....Bill to party, Ship to party, sold to party and PAYER......creating customer under these 3 groups.....in customer master data ...sales data tab we assign all these parameters...example...
Customer....100
In Partner functions.....
Bill to party.....100
ship to party,,,,,,,,,,,,100
Sold to party............100
PAYER..................200
Whenever you create sales order to customer 100....invoice will raise to 2OO(Dr customer 200 CR Sales).......
Now the requirement is whenever you do any posting F-29,FB70......system has to allow only PAYER in customer field....if you enter any other(SHIP,SOLD OR BILL TO PARTY) System has to give error.......
For all customer groups they are using same number range.....i have tried by surpressing the recon account in the Field status group in Bill to party, ship to prty and sold to party but it is not working,,,,,,,Pls tell me how can i achive this...
Pls Give suggestions......
Thanks
Chandu

you should log this in to SD or FI forums. This is CO!

Custom field error

Hi,
I have a requirement for a Z-table(populated via a dialog program) wherein a price field should have two digits and four decimal places. This field is something like the WERTV4 domain but only with 4 decimal places. I have created a custom domain for this requirement. My problem is that on the input screen I'm not able to enter values with four decimals. It gives an error "Input should be in the form __,__~.__v " . But I'm able to enter two decimals say 45.45 on the screen and my z-table has a record with 0.4545 in it. On screen painter, I have defined the the field with ref to the data element in my Z-table. Data element has a check table entry of T001 and ref field WAERS. Any help on this is highly appreciated.
Thanks,
A.P.

Hi,
Why do you want to create a new domain? There are standard domains available for your requirement. Use domain DEC2_4. (2 characters before and 4 after decimal point acc.to norm)
You can also check the below domains.
DEC2_4
ENTGP6
FAKTOR64
ICL_EXPPERCENT
ICL_IBNRPERCENT
ICL_ULAEPERCENT
OIU_QUAN64
P01C_FAKVR
P13Q_MEDLV
P15_COMRP
P15_DINPS
QBJ_FK2
QPMAT
RSDEC2_4
VER_DYNP_6
Thanks
Ramakrishna

Issues With AET custom field generation,EHP1

Hi ,
There is a DB limit for creating a custom fields
error showing limit exceeds .
Here we can use reusable fields.
we are unable to delete the fields also...by clicking on delete icon and then save and generate.
can we control this?
and table view created throgh aet ,is called by bp_head .
now when i delete the component generated by aet ,getting an error ,as at run time its getting called by
GET_INTERFACE_VIEW_CONTR.
How should i reslove it.
Thanks,
Anitha.

Hi Anitha,
During the creation of AET fields, if you have chosen the options like BW/R3/Mobile then the problem comes when deeleting these fields. Please follow the instructions given in the note 1346128. There are some set of manual steps given to delete AET fields.
Hope it helps. satish

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Error while adding custom fields in ERP quotation

I am trying to add custom fields to ERP quotation. So picked up ERP_H and added view BTCUSTOMER_H/CustomerH to its views. I have added the relevant custom fields to BTCUSTOMER_H/CustomerH. Now when I try displaying this, I get the following error..
Context generation failed in view BTCUSTOMER_H/CustomerH of UI Component ERP_H
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Initialization of view BTCUSTOMER_H/CustomerH of UI Component ERP_H failed
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Cannot display view ERP_H/HeaderOverviewpage of UI Component ERP_H
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Window ERP_H/MainWindow of UI Component ERP_H cannot be displayed
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BTCUSTOMER_H/CustomerH in component ERP_H could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
I have no prior experiance in UI development. Could someone explain me this error and how to fix this?
Regards,
Amar.

closing this unresolved

Getting error while adding a custom field (with input help) through AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running while I am testing it
While adding fsecond field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Please help me out.Kindly be detailed as I am new to SAP CRM.

Thanks for very helpful reply. After implementing the suggested SAP note, I am able to see the getter and setter methods.
So one of my problem has got solved with your kind help:)
As per your another suggestion,I have created the enhanced fields without the search help from AET in the node BTAdminI with names Plant(ZZPLANT) and Storage Location(ZZStoarge_Loc).
Now I am facing below problem:
Since Plant needs to autopopulated by Storage Location (search Help ZOFI_SHLP_STORAGE_LOC),So I need to Implement Getter setter method.
I have written below code into Get_V_ZZStorage_Loc Method:
method GET_V_ZZSTORAGE_LOC.
DATA:
    ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
    lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
    lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
    ls_map-context_attr = 'ZZSTORAGE_LOC'.
    ls_map-f4_attr      = 'STORAGE_LOC'. (Storage_loc is the parameter defined in search help)
    APPEND ls_map TO: lt_inmap, lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id        = 'ZOFI_SHLP_STORAGE_LOC1'
      iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_callback
      iv_input_mapping = lt_inmap
      iv_output_mapping = lt_outmap.
endmethod.
But its not working.Should I write some code in Get_P_XX or some other method also?
Kindly suggest .

Error when add a custom field to source 2LIS_12_VCHDR

Hi Experts,
I'm trying add a custom field to source 2LIS_12_VCHDR. The fields are in LIKP table's append. That are
zz fields. I can see the fields in MCLIKP structure, but I can't see these fields in LBWE transacction when I try update the structure MCLIKP. I don't know if this last is important because when I replicate of the source the fields, they are visible in BW.
The problem is when I try activate the transfer structure. I Can add the fields from the data source to the transfer structure but If try activate the source the error is:
"Error when creating transfer structure /BIC/CCBA2LIS_12_VCHDR in source system XXXX"
I'm forgetting some step?
somebody know other way for do it?
thanks for your help.
Manuel.

Hi
May be the datasource is not active, do the following obviously in development
goto LBWE and click on your datasource; system will ask you for a transport request number give it a name. now save the datasource.
replicate and activate your t/r
hope this helps
Regards

Error in BSEG partially active after removing the custom field CI_COBL in ECC 6.0

Hello SAP Gurus,
I added one custom field in CI_COBL and activated ,the all the connected DB tables like BSEG etc activated successfully. But after that I deleted the field from CI_COBL but the BSEG and CI_COBL could not be activated. It is still in partially active .
Please suggest how to resolve this issue. Its very urgent.
Thanks in advance
Regards,
HP

Hi,
I hope you are going to do in Development system then check any errors in SE11.
if its fine then got to SE14
Check the status whether Active or partially active
if its other then Active, you may get help from BASIS team or yourself can do it in SE14
Click the button 'Activate and adjust database' please ensure that the radio button save data should be selected and which is default or else the entire DB records will be deleted along with DB table activate.
In development you can choose processing type as Direct/Background.
Please post if you have further query.
Regards,
Vadamalai A

Error adding custom field in POWL

Hi all,
I've added a custom field in POWL for SC.
The problem is when I fill this custom field and push the search button an error is displayed:
"Last query refresh failed due to internal errors; contact your admin."
I've seen there is a short dump in st22. SAPSQL_INVALID_FIELDNAME
I've seen that the select statement is being built dynamically (include LBBP_PDF80).
Within the conditions of the where clause is adding a line with the correct value but is adding another senseless line .
In the custom fields range is always adding a line like this; LOW = space OPTION = CP.
I don't know why. The problem is in the form GETLIST_CUF_ADD_LINE.
If I delete this second condition in debug mode is working fine.
I've tried to find some OSS note but I couldn't find any...
This are the steps I've followed to add the custom field in POWL:
- Add the field to structure /SAPSRM/S_SEARCHFIELDS. (with the same name that it have in st. INCL_EEW_PD_HEADER_CSF_SC )
- Add the field in view /SAPSRM/V_SRC_CR.
- Add the field in DB criteria in the transaction /SAPSRM/POWL_CUST.
- Use the report POWL_D01 for refresh the query.
Do you know what can be the problem?
Thanks in advance.

Which version of SRM are you using ?
Pls. check the attached note, which describes the similar problem :
[Note 1555113 - Dump occurs when searching for customer fields|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1555113]

"500 internal server error" after adding custom fields to Address page

I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
we also extended the Badi HRPAD00INFTYUI
custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
we get the following error:
"500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
"Area8" is one of the custom fields we added in PA0006 (Address infotype).
any idea what is wrong? maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
T.

Hi Sasu,
Its clearly saying contect binding error. Have you mapped correctly from FcComponent to VcComponents.
FcCompoenets for Model logic.
Check the mappings correctly.
If it is complete custom or new field then there will be could of steps.
1) Reimport the model
2) map new field to FcComponent
3) Bind new Fields from Fc to Vc
Rgds
-SS

Error while adding custom fields using EEWB.

Hi
While trying to add custom fields using the transaction EEWB i got an error message
'No Logsys040 transport request exists for system workbench.Please let me know why it happens.
Thanks
sureshpaul

closing this unresolved

Runtime error in CRM_DATAEXCHG_BADI after adding customer fields using EEWB

Hi gurus,
I am getting short dump in ZCL_IM_EEW_DATAEXCHANGE06~CRM_DATAEXCH_AFTER_BAPI_FILL.
I've added 3 custom fields in ORDERADM_I structure using EEWB. ( created in ECC also ).
Now when i create a sales order, its not flowing to ECC as i am getting the below error.
UC_OBJECTS_NOT_CONVERTIBLE
Error occured while executing below statement
MOVE <ls_bape> TO ls_bapiparex_wrk+lc_offset.
<ls_bape> is having all the custom fields i've created using EEWB.
Error short text i am getting in st22: ' Data objects in Unicode programs cannot be converted.'
Kindly help.
regards,
Arun N K.

Hi Robert,
Thanks for the reply.
I was not able to use move-corresponding as there was no matching fields in the destination structure.
Anyway we found out the issue. One of the custom fields generated using EEWB, used INT4 data element. I deleted the field and created it again using character (NUMC) data element, and it worked fine.
I still don't know the exact problem of using integer data element. Kindly share if anyone find the reason.
Thanks,
Arun N K.

"The selected cells are read-only" error on Custom Field when trying to insert in Datasheet mode

I have a custom field that works completely fine. Yesterday our QA team found out that when trying to insert in Datasheet format, the error "The selected cells are read-only" was thrown. Any ideas? I tried passing the following property to my fldtypes_field.xml file:
    <Field Name="ReadOnly">FALSE</Field>
No luck.Victor Palma

Unfortunately it did not work. I also developed the code and access the field and checked its property called "ReadOnlyField" which is already set to false.
Below is the xml that i am using. Can you please share the xml that you had used?
<?xml version="1.0" encoding="utf-8"?>
<FieldTypes>
  <FieldType>
   <Field Name="TypeName">MyCustomField</Field>
   <Field Name="ParentType">Text</Field>
   <Field Name="TypeDisplayName"> My Custom Field</Field>
   <Field Name="TypeShortDescription"> My Custom Field</Field>
   <Field Name="AllowBaseTypeRendering">True</Field>
   <Field Name="ReadOnlyField">False</Field>
   <Field Name="UserCreatable">TRUE</Field>
   <Field Name="ShowInListCreate">TRUE</Field>
   <Field Name="ShowInSurveyCreate">TRUE</Field>
   <Field Name="ShowInDocumentLibraryCreate">TRUE</Field>
   <Field Name="ShowInColumnTemplateCreate">TRUE</Field>
   <Field Name="FieldTypeClass">My Assembly Information goes here</Field>
  </FieldType>
</FieldTypes>

'BuilHeader not bound' error for custom field added by AET

Hi,
We created a Custom field through AET in IC Web UI Screen
The field is in the Accont Identification screen
But the field is showing 'Buiheader nto bound error' on loading of the screen.
We generated the GETTER and the SETTER Methods for the corresponding field in the context node CONTACT PERSONS of the ICCMP_BP_SEARCH Component.
While Debugging its seen that the
    DATA: current TYPE REF TO if_bol_bo_property_access.
if iterator is bound.
      current = iterator->get_current( ).
    else.
      current = collection_wrapper->get_current( ).
    endif.
current is not getting populated and thats reason why its giving the 'Buiheader not bound error'
Any suggestions on this will be highly appreciated.
Regards,
Sijo
Edited by: sijokjohn85 on Oct 21, 2009 3:01 PM

Hi Masood,
I checked the method create_contactpersons but I couldnt find anything unusual there.
The code below is present in the CREATE_CONTACTPERSONS Mehtod of the context class
model = owner->create_model(
        class_name     = 'ZL_CRMCMP_B_BUPASEARCHB2B_CN01'
        model_id       = 'ContactPersons' ). "#EC NOTEXT
    ContactPersons ?= model.
    CLEAR model.
* bind to custom controller
owner->do_context_node_binding(
           iv_controller_type = CL_BSP_WD_CONTROLLER=>CO_TYPE_CUSTOM
           iv_name =
           'ICCMP_BP_SEARCH/CuCoSearch' "#EC NOTEXT
           iv_target_node_name = 'CONTACTPERSONS'
           iv_node_2_bind = CONTACTPERSONS ).
Any suggestions like how to fix this issue.
Regards,
Sijo

Custom Field error in RPM

Similar Messages

Maybe you are looking for