Custom field in COOIS selection screen

Hi all,
how do I add a custom field (IOHEADER-ASTTX, User status) in the COOIS selection screen ?
Thank's
Edited by: Marco De Caro on Dec 6, 2011 2:15 PM
Edited by: Marco De Caro on Dec 6, 2011 2:16 PM

Hi,
Use the BADI : WORKORDER_INFOSYSTEM
Method: TABLES_MODIFY_LAY
In the method TABLES_MODIFY_LAY there are many table parameters for different data display of the production order.In this scenario only the header detail structure is being extended with append structure.
Add the extra fields to be displayed to through append structure to IOHEADER_TAB.
Example code :
DATA : BEGIN OF st_matkl,
           matkl TYPE matkl,
           END OF st_matkl.
DATA : st_header TYPE ioheader.   LOOP AT ct_ioheader INTO st_header.
    IF NOT st_header IS INITIAL.
      SELECT SINGLE matkl
             FROM mara
             INTO st_matkl
             WHERE matnr = st_header-matnr.
    ENDIF.
    st_header-matkl = st_matkl-matkl.
    MODIFY ct_ioheader FROM st_header.
ENDLOOP.
When you run the report will be able to see the added field in the ALV.
Thanks,
Shailaja Ainala.

Similar Messages

Add custom field in the selection screen for shopping cart monitor report

Hello,
refering to the notes 458591 an 672960, in order to add custom field at item level, we get the structure INCL_EEW_PD_ITEM_CSF.
But this doesnt make it appear on the "Shopping Cart Monitor Report" selection screen.
So should I try adding it in the existing interface of the badi bbp_sc_mon ?

hello Yann,
ok I will implement that. Is it possible to change the interface of the badi method to include more data if we want to check the role of the user who is executing the shopping cart monitor report and accordingly do the settings of field display ? Or calling a function module inside the method to get the attributes of sy-uname would be easier?
rita

Add customer field in IH08 selection-screen

Hi guys,
I need to add 1 customer field ZZ to the selection screen IH08 in order to search equipments by the ZZ field.
Did anybody know if it is possible?
Thanks in advance,
LMS

I use enhacemente ITOB0001 to add one field to the screen of equipments (IE01, IE02 and IE03) and that is working perfectly.
In IH08, i put an append structure on structure RIHEQUI_LIST in order to the ZZ field could be seen in the ALV list. But, my problem is to make that ZZ field searchable... I need to search equipment on IH08 by the ZZ field.
I look on SPRO, for the equipments lists customization, i made tests and tests but nothing works...
If anybody knows how to solve this, please help me.
Other chance is to develop a Z program... But i prefer use the IH08...
Best Regards
Edited by: Luís Silva on Jul 31, 2009 11:28 AM
Edited by: Luís Silva on Jul 31, 2009 11:29 AM

REPORT PAINTER - Add a field to a selection screen - custom report

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

I need below fields at my selection screen.From which table we can find the

Sales Org > only one selection field
Division > only one selection field
Channel > from u2013 to fields
Sales Office Channel > from u2013 to fields
Sales Rep Channel > from u2013 to fields
User ID of the CSR Channel > from u2013 to fields
Customer Channel > from u2013 to fields
Material Channel > from u2013 to fields
Date: Channel > from u2013 to fields
I need these fields at my selection screen.From which tables I find these things.I need this logic also.

I need help

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

How to validate a select-option field on the selection- screen

Hi,
   I need to validate a selection-option field in the selection-screen.
Requirement is : i need to read each of customer number one by one and validateCan you please me in achieving this.
Best Regards
Mamatha.B

hi,
chk this sample code.
SELECT-OPTIONS : s_kunnr for kna1-kunnr.
AT SELECTION-SCREEN.
     if 'S_KUNNR-HIGH' = "condition
    "put your required validation here
     endif.
rgds
Anver
Message was edited by:
        Anversha s

Additional custom field on mm01/mm02 screen

hi all,
I need to create an additional custom field on mm01/mm02 screen.
value entered in this field will be updated in the database.
Kindly give pointer to the user exit/ screen where i can create the custom field.
thanks in advance

Hi Manish,
Do the following process step by step as specified in the following link.[http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm]
But in this link while you are at the 11th step
select your required view.
and do the rest as usual.
This is at the configuration level u can add your customer fields.
I dont think there are any exits available that can fulfill your requirement as the same requirement is fulfilled at the customization level.
Thanks.

Logical database sdf in custom program not triggering selection screen?

I added logical Database SDF (screen 905) to a custom program - but the selection screen is not getting triggered.
Do I have to associate these somewhere?
Thanks,
Ven

HI,
Declare this statement after the Report Statement in the program.
TABLES : SKA1, SKB1.
You will get the selection screen now.

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

Custom field in Basic data screen of invoice entry screen

hello,
I want to add custom fields in basic data screen of Invoice entry in SRM 5.0.
As invoice Entry screen is divided into three parts:
1. Basic data Screen
2. Header data screen
3. Item data screen
Now according to OSS Note number 672960 we are able to add Custom fields in the header as well as item data screen of invoice entry without any difficulty.
but our requirement is to add custom fields in the basic data screen.
Is there way available to add custom fields in the basic data screen.
Thanks
Sarabjeet

hi
check this spro path
Financial Accounting (New) --> Travel Management --> Business Add-Ins and User Exits in Travel Management --> Entry --> Screen Modifications: Adjustment of "User Data" Screen

Adding field in the selection-screen of a zprogram

hi gurus,
i have to add field in the selection-screen of oppurtunities. in database i have a field salesvalues, some of oppurtunity guids have this field value. first i need to add in selection-screen in this alv report. and fetch the data from ztable into required field . if the input fields of the salesvalues field id filled, then filter the global guids(from global table which had the guid values already) with this guids related to salesvalues. and if one single guid mathes to 2 values of salesvalues then concatenate 2 values with comma and display in single field. if select-options are blank then fetch all opportunity guids which have salesvalues. pls give solution.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Functional area(FKBER( field in the selection screen))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

Hi,
How you have filled the values?
It is 16 CHAR long.

Custom field in COOIS selection screen

Similar Messages

Maybe you are looking for