Custom inventory report not working using OITM token

We are running SAP Business One 8.82 (8.82.068) PL:06. I have created a custom report where I attempt to use the OITM token within Crystal Reports as the parameter, but it does not seem to work. The report will run when I run it within SAP B1, however, it does not take into affect any options I choose within the token. The example provided below shows how I use the parameter, how the report is run and what options are selected, and the results I get. As you will see, I select the check box to hide inventory items with zero stock, but clearly in the results pane you can see inventory items with no stock displayed. Is this a bug or am I doing something wrong? Thank you in advance for your help.

In Crystal Designer, under Report>Select Expert>Record
add a formula like Oitm.ItemCode = {?Your Paramater token}
This is what will filter the report results. You can add filters to your token eg MyParameter@SELECT * FROM OITM WHERE ONHAND >0 as well, which will help to filter, it depends where you want to do the filtering.

Similar Messages

Add column to custom inventory report

Please add a column that show the date a device was first collected into the inventory report.

I am using the Excel output to populate a database. We will be using that data in development of a Change Log site, we will need to have a complete inventory of all chassis in our network. I am asking for the "Date added" column so that I can easily keep track of any new or changed chassis in the Network to easily add those devices to the database.
I know the Delta report identifies any changes, but the format of that report is not the same as the inventory report. I would have to run the Delta report, then a new inventory report, use vlookup to identify the new items in the inventory report. It can be done, just looking for an easier way to keep my database current. If the "date added" column was in the Inventory report, keeping a current list of our network would be much easier. I could sort by data added, add those rows to my database.

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Custom inventory report

Hi,
If I give a user full rights to "Inventoried Device Rights" and "Reporting Rights" they are still unable to create Custom Reports, am I missing something?
Or is this working as designed or maybe a bug that only ZCC Administrators create Custom Inventory reports?
Thomas

Originally Posted by thsundel
Hi,
If I give a user full rights to "Inventoried Device Rights" and "Reporting Rights" they are still unable to create Custom Reports, am I missing something?
Or is this working as designed or maybe a bug that only ZCC Administrators create Custom Inventory reports?
Thomas
I would of thought reporting rights would cover this too.
Doco extract:
2.3.16 Reporting Rights
The Reporting Rights dialog box lets you allow or deny the administrator the rights to create, delete, execute, or publish reports.

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Safari 5.1 customized keyboard shortcut not working

I've just updated safari on snow leopard and my customized keyboard shortcut: go to next/previous panel (ctrl -> and ctrl <-) don't work anymore even if i set them in my system preferences

I'm also experiencing issues with custom keyboard shortcuts not working after the update to Safari 5.1. I had no problems with the previous version of Safari.... I wish I had not updated.

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

Custom rendering extensions not working in SSRS Report Designer (rsreportdesigner.config)

My custom rendering extension is working in Report Builder (in RSReportServer.config), but not in Report Designer (in RSReportDesigner.config): instead of adding a "TXT" export option, it's just adding a duplicate "CSV" option.
SUMMARY:
Is there a way to get these features working, with Report Designer?
DETAILS:
We are running SSRS (Reporting Services) under SQL Server 2008 R2.
Here's my rendering section:
    <Render>
      <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering" />
      <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering" />
      
      <Extension Name="TXT" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TXT(ASCII,NoColHds)</Name>
       </OverrideNames>
       <Configuration>
          <DeviceInfo>
              <FileExtension>txt</FileExtension>
               <FieldDelimiter>,</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <NoHeader>true</NoHeader>
           </DeviceInfo>
       </Configuration>
      </Extension>
      <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering" />
      <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering" />
      <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" />
      <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering" />
      <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" />
      <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering" />
      <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering" />
    </Render>
When I add the above "TXT" section to RSReportServer.config, then Report Builder (and production) both show an export option "TXT(ASCII,NoColHds)".
But when I add this "TXT" section to RSReportDesigner.config, and then (in Report Designer / BIDS) attempt to export from a "Preview" of the report, the export drop-down does not show a "CSV" option followed by a "TXT"
option, but instead shows the "CSV" option twice.
This simply limits testing of the export option, to Report Builder... or requires any reports be published from Report Designer before they can be tested with
this export option.
(FYI, why this export option: compliance in our industry requires sending data to government agencies, in text files, with fixed-length columns, and ASCII encoding. Also, we're attempting to give the production of these files to the *users* managing
communication with those agencies... so we're putting them into SSRS.
I worked around the fixed length columns (and no delimiters -- no commas), by writing a version of the report where all string columns are padded, and all columns are concatenated, to form ONE LONG COLUMN... but Reporting Services' CSV export format produces
a Unicode file (UTF-8, which the agency rejected, because it had a leading "ï»¿", or "EF BB BF" in hex), whereas the agency requires an ASCII file.)

Hi Doug_atMidway,
According to your description, you want to enable your custom render extension. Right?
In Reporting Services, if you want to deploy the custom extension, you just need to add the extension into rsreportserver.config file. The
RSReportDesigner.config file stores settings about the rendering extensions available to Report Designer. Since you still use the csv rendering extension in your assembly, we don't need to do any modification in rsreportdesigner.config file. Pleaes
refer to the links below:
Thanks for attempting to help, Simon.
As my question states, I've *already done* both the above: changed (1) rsreportserver.config and (2) rsreportdesigner.config. I added the same code, shown above, to both files. I did that so I could see the new "txt" extension
both (1) when exporting in production and Report Builder, and (2) when exporting in Report Designer's "preview".
The change in (2) is not working: I do not see the "TXT" extension in Report Designer, when I try to export from a preview. Instead, Report Designer shows the CSV extension repeated.
Thanks for the docs. I consulted them (well, I consulted the EQUIVALENT pages, for SQL Server 2008 R2), when creating my block of code above.
Do you see anything to correct, in my code?
Are the features I'm using actually working, with rsreportdesigner.config?
Thanks again,
-- Doug

CWA using customized portal does not work IPAD 2

Hi all,
I have another interesting case that I have been testing for more than a month but it is not working. Cisco provides templates to create the customized portals for LWA or CWA. However, Success Page HTML does not work on LWA and Cisco ISE uses internal default success page.
On my specific case, we need to move from LWA to CWA in order to minimize the number of redirections and the customized portal for login and AUP work fine BUT when the SUCCESS PAGE is presented on the IPAD, the button on the top right corner never changes from CANCEL to DONE even though the Authentication is successful. We modified multiple times the HTML Files following Cisco Templates and the following link (which looks like has an error) with the same incorrect behavior. Only works if I click the go back arrow on the IPAD so I move back to the AUP page (not an acceptable workaround).
Reference Link:
http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-42-Customize_ISE12_Web_Portals.pdf
In the link, Cisco mentions version 1.2.0.899 patch 8 as the version to be used on the ISE devices running the customized templates. However, we recently moved from 1.1.3.124 to 1.2.1.198 patch 3. I created a brand new VM running 1.2.1.198 patch 3, imported the cisco templates for login, AUP, success and error and I am still getting the same problem on IPAD 2 for SUCCESS PAGE even though I am using Cisco Templates.
I could give a try configuring another VM running 1.2.0.899 patch 8 and use the Cisco templates + IPAD 2 but that is not a good solution.
Have anyone experienced the same problem?
thanks

I opened a case with Cisco TAC, let's see what happens. In the meantime, I created a VM ISE which will be running 1.2.0.899 patch 8 so I will upload the Cisco HTML Files on it and see it this option works properly on IPAD 2, IPAD 4, Chromebook, Win 7 and Samsung Tablets.

Custom inventory report not working using OITM token

Similar Messages

Maybe you are looking for