Custom metadata properties give no results after upgrade from 2010

Hi,
Although I see my custom managed properties in my Search Schema in Central Admin, I am unable to find results using them e.g. 'VendorName:Marcel'. I have tried changing the column value in a document and performed a full crawl, but still no results. General
searches such as 'Marcel' work fine and even something like 'author:marcel' (which is a built in managed property) works too. What am I missing? How can I determine the issue? Nothing stands out in the ULS logs.
Background:
I recently upgraded my managed metadata service and search service from 2010 to 2013.
I then upgraded the content db holding my root site collection, and had to re-create my search service proxy to get searches to work. I then upgraded the content db which holds my content hub site collection. This includes site columns, many of which
are also Managed Properties.
Crawls are running with 8 errors - none of which are for the document I changed. Warnings are mainly about 'png' files.
In 2010 I had scopes, which I no longer see in Central Admin. Although I have converted the content database without error, I have not converted the Site Collection to 2013 yet.
macrel

I had to set each metadata property 'queryable' property and then run a full crawl after which the results were returned. I am surprised that this did not come over from the upgrade of the search service.
macrel

Similar Messages

  • Maxdb give Kernel error after upgrade from 7.3 to 7.5

    Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
    dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
    ERR
    -24994,ERR_RTE: runtime environment error
    1,Check knldiag! Kernel died before reaching ADMIN state
    The details of the error in knldiag are:
    2008-07-02 14:22:39    19     11554 COMMUNIC UKT8 attached big comseg at  0x700000060000000
    2008-07-02 14:22:39    19     11555 COMMUNIC UKT8 big comseg ends at      0x7000000601803F8
    2008-07-02 14:22:39    16 ERR 20152 RTE      UNIX change owner with chown(knltrace,964,202) failed: Not owner
    2008-07-02 14:22:39    16     11000 vdevsize 'knltrace', 666 failed
    2008-07-02 14:22:39    16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
    2008-07-02 14:22:39    16 ERR 11599 BTRACE   -
    > Emergency Stack Back Trace <----
    As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
    We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
    We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
    thanks

    Hello Thomas,
    -> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
         Please check the upgrade log in the /sapdb/data/wrk
    -> Please check the ownership of the files in the database RUNDIRECTORY.
    For example, if the database owner:group of your database is sdb:sdba, then
    -rw-rw----   1  sdb        sdba  u2026.     knltrace
    -> Please update the thread with the output of the following commands :
               sdbregview -l
               xinstinfo SD3
               id sdb
              ls -l <runditectory>
    < rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
            more /etc/opt/sdb
    Thank you and best regards, Natalia Khlopina

  • Excel file error after upgrade from 2010 to 2013

    Hi there,
    I did the upgrade from 2010 (Enterprise) to 2013. The excel files are not opening giving error.
    ULS Log: "Unexpected error when trying to access service settings in the configuration database. Make sure the proxy for this service application is a member of the default proxy group for the active web application. Error = ExcelServerWebServiceApplication.Local:
    Could not get the web application associated with this context. This indicates that the Excel Server service is not properly registered or provisioned.."
    Question : Do I need to create New Excel Service Application separately on SharePoint 2013 Server?
    I followed this link for upgrade
    http://technet.microsoft.com/en-us/library/jj839719.aspx but it doesn't say anything for Excel SA.
    Note: I have plan to configure separate Office APP Server to give user access the documents on iPad/iPhone. Should I need to do any configuration related to this error on Office App Server?
    Please advice.
    Thanks,
    Khushi

    Hi Khushi ,
    Yes, you need to create New Excel Service Application separately on SharePoint 2013 Server. Due to  only the following service applications have databases that can be upgraded when you upgrade from SharePoint
    Server 2010 to SharePoint Server 2013:
    Business Data Connectivity service application
    Managed Metadata service application
    PerformancePoint Services service application
    Search service application
    Secure Store Service application
    User Profile service application
    Attaching and upgrading these databases configures these service applications. Settings for other services will have to be reconfigured when you upgrade.
    Reference:
    Services upgrade overview for SharePoint Server 2013
    For configuring Office Web Apps Server , you can refer to the blog:
    http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • User metadata values is showing as plain text in Mysites after upgrading from 2010 to 2013

    We have upgraded our Mysite from 2010 to 2013, after upgrading User metadata values is showing as plain text where
    as in 2010 it has shown as hyperlinks.
    In Mysite 2010 by clicking on user metadata for favorite sports, Favorite Movies etc...it will give the results from search containing same value for other user
    by going to search results page. After upgrading it to 2013 (with 2010 UI) and running full crawls, I am able to search by clicking on any user property.
    After upgrading look and feel to 2013 version  these fields showing as plain text. Can anyone suggest how can we get hyperlinks and how can we make user
    metadata searchable directly by clicking on Property value from Mysite. Below screen print explain you the difference clearly.
    Santosh

    Hi Inderjeet, thanks for the update.
    I am running with SP1 + july2014 CU.
    Search is working fine, I am able to get search results from search page, here the problem is I cannot go to search results by directly clicking on a property.
    In SP 2010, If I click on favourite sports team, (Chelsea football) it will open search results page with all users who have given this team name.
    Where as in SP 2013, this data is appearing as plain text in mysites(Please note before UI upgrade, I am able to search as in SP 2010). You can notice the difference in my above screenshot.
    Is this default behaviour in SP 2013? Has anything changed or am I missing something.
    Santosh

  • My custom protocol handler isn't working after upgrading from 3.0

    Redhat Enterprise Linux 4
    Firefox 3.6.7. Updated via RedHat Network.
    I'm trying to add a custom protocol handler (gdc) to Firefox. This worked in 3.0 and earlier. Now I'm getting "Firefox doesn't know how to open this address, because the protocol (gdc) isn't associated with any program." errors.
    Tried adding network.protocol-handler.app.gdc string with valid path. Didn't work. Went to #firefox irc.mozilla.org and was recommended that I add network.protocol-handler.expose.gdc and set it to false. I still get the error.

    Hi There,
    Yep I can confirm that I am having problems with wifi as well.
    My problem is that it is not re-joining known networks.
    Also the auto login feature designed for hotspots does not seem to work well either. The Log In Screen slides up then an error keeps repeating on the page...."Error Opening Page - The page could not be opened because an error occurred"

  • Impact on Custom / Std IDOC after upgrading from 4.7 to ECC 6.0

    I am in Upgrade project (4.7 to ECC 6.0).
    What will be the impact of the existing Custom and Std IDOC after upgrading from 4.7 to ECC 6.0 and if any impact, what are precautionary steps to be taken to work as it is.
    Will there be any Impact on ALE also ?
    Thanks & Regards
    Khaleel

    closed.

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

    Hi All,
    After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
    Thanks in advance
    Taj

    Hi,
    This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

  • ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

    After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
    2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
    2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
    2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
    2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
    2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
    2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
    2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
    2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
    I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
    TIA!

    I did not change password. It is not password issue.
    According to Oracle support,
    1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
    2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
    could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
    Thanks for your input!

  • After upgrading from FM 9 to 11, FM crashes when the Print Book command is used. Suggestions?

    After upgrading from FrameMaker 9 to 11, the program crashes when the Print Book command is selected to print files that were converted from FM 9 to FM11. (Resulting .pdf files are problematic, w/ broken links and non-functioning bookmarks.)  Has anyone encountered this issue, and can you suggest a workaround? Thank you!

    Known bug - already fixed - get the latest FM11 patch

  • No images in Lightroom 3.4 after upgrading from 3.3

    Hi all,
    after upgrading from 3.3 to 3.4 and registration process I can't see any images in Lightroom. All functions are there, but no images are seen. All images have a grey background. I rebooted the computer several times, no effect.
    I am completely confused with this. Can anybody give me a hint, please?
    Bernhard

    Sorry, here is my screenshot:
    Bernhard

  • Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini

    Hi all.
    After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
    Some explanation....
    I create HD MJPEG files on a PC with Blackmagic Decklink.
    I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
    On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
    Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
    If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
    I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
    Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
    So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......

    To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
    This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
    Blackmagic HD or SD to
    Matrox HD
    QT HD MP4
    QT SD DV25
    DV AVI SD
    Mpeg2 - DVD
    Every single encode is slow by 2x to 6x.
    Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
    Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon....

  • Graphics instability and crashing after upgrade from FF 32 to 33

    Soon after upgrading from 32.0.3 to 33 (Windows 7), I was seeing occasional flicker-like split-second black flashes. (I *think* this was mostly when opening new pages, but I don't recall for sure...maybe also when scrolling). Then a few minutes later I was scrolling a page with my laptop touchpad and the screen flashed completely black, stayed that way for about a second, and then came back up with a Windows message that Intel Graphics had recovered from a crash. (Which is doubly interesting given that FF set to use my discrete NVIDIA graphics on this computer.). I haven't seen anything like this happen in the nine months I've had this laptop, with or without FF open. There was also a message that FF had crashed.
    Then I restarted FF, and all was going OK, except that I believe I still saw a few split-second "in the blink of an eye" black screens as I opened new pages. But then I went to Google Maps, and was dragging a map upwards. But instead of the lower portion of the map moving into view, I only got a blank white screen. The further up I dragged the map, the more of the the screen that was blank white, until it was completely white. Then FF crashed again.
    I thought the new FF native H.264 might be causing the issue so I disabled it and restarted FF. But then I went back to Google Maps, tried the same thing and had the same issue (but no associated crash, although I closed FF very soon after I saw the odd graphics behavior recurring so maybe I didn't give it enough "time to crash").
    I re-installed 32.0.3 and all the issues went away. FWIW, I've had occasional crashes and slowdowns with 32 and other recent versions. (I could recover from the slowdowns just by restarting FF.) Most of those issues seemed to be associated with Adobe Flash. That behavior was an occasional annoyance but nothing of the magnitude of what happened when I tried FF 33. I don't know if this latter observation adds anything, but I just thought I'd throw it out there. Fyi, the laptop has 2.4 Ghz CPU (Intel i7) and 16GB memory.
    Any ideas? Thanks.

    Today when I noted that Lenovo still hadn't released an updated driver specifically for the Intel Graphics, I went back and installed a Lenovo NVIDIA Optimus update that I had tried 4 or 5 months ago but had subsequently reversed because it had created problems with Firefox. (Specifically, it was causing Firefox context menus to render slowly and incompletely.) Not only does the NVIDIA update no longer cause the FF context menu problem, it seems to have *solved* the problem I posted about here. It updated the NVIDIA driver ("GPU #2" above) from version 9.18.13.1269 to version 9.18.13.3302.
    This makes some intuitive sense, since -- as I said above -- I have Optimus set to use the NVIDIA graphics with Firefox instead of Intel. (I had thought that, based on what I read in Lenovo support, the NVIDIA Optimus update might install a new Intel Graphics driver as well, but the Intel driver is still shown as the same version listed above (8.15.10.2725). (I don't know whether or not these driver numbers might be Lenovo-specific.)
    Anyway, the NVIDIA Optimus update fixed my problem, so thanks for pointing me in the direction of graphics drivers. (I suppose there's also a small possibility that something had simply gone awry with my first update to FF 33, and that what really solved things was simply reinstallingl...)

  • C6150 won't print after upgrade from Vista to Win 7

    Hello.
    I have a C6150 AIO that worked fine under Vista.  Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print.  The HP Solution Center test print works fine.
    -  Printer is hooked up wirelessly
    -  I've installed the latest driver from HP that is supposed to be Win 7 ready
    -  I've also installed the patch they recommend after upgrading from Vista
    There is no error.  Print job shows up briefly in the print manager window, then disappears as though it printed.  I'm at a loss, any help would be appreciated.
    Paul
    This question was solved.
    View Solution.

    I hope I have now sorted this problem.....
    After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
    Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
    After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful  restore system and start again.  Most it took me was three attemps.
    Now allI have to do is hope that the windows updates dont mess it all up again!
    Hope this helps you......... Good luck

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

Maybe you are looking for