C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Similar Messages

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

Monitor HP w2338h area shrank after upgrade from vista 64 to 7

Monitor HP w2338h area shrank By 3/4in both sides &1/2in top & Bottom after upgrade from vista to 7 Tried settings to max resolution On HP Pavilion a6857c Please Advise, I also reloaded the drivers for my Video card a ATI Radoen 5450 HD and all updates for windows 7 home Premeium 64bit & HP updates
This question was solved.
View Solution.

Glad to help!
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

After upgrading from Vista 64 64 bit to Window7 64bit the DVD stopped working

After upgrading from Vista 64 64 bit to Window7 64bit the DVD at first worked just fine but after about 7 months it just stopped responding as if the hardware as in the DVD Dive it compatible with Windows 7. I have reinstalled the full Windows 7 that I got from HP but it still has the same problem and when I try a full recovery it will start to read the recovery DVD but it take way to long like 15 mins just to start reading and it stops reading with error's after about 2 min's into it.
Were is the errors that I get
This PC in not supported by the system recovery disc. you will not be able to continue to recover this system with these disks.
keep in mind that the problem lies with the DVD drive not working and like stated above it will work if Windows Vista 64 is installed so this error message is not the key to the problem just part of it.

Fixed the mic issue by running Windows Update and installing the latest audio drivers.
AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio
Installation date: ‎11/‎1/‎2009 8:35 AM
Installation status: Successful
Update type: Optional
AnalogDevices Audio software update released in June, 2009

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

HP p1006 won't print after upgrade to Mavericks

After upgrading from 10.8 to 10.9 my computer won't print anymore. It says "Pages not found!"
The printer is attached to a Mac server running 10.8 which is printing fine, but my computer (running 10.9) won't print unless I boot it from the 10.8 partition which still works.
What I've already tried: (on my computer & server)
Reset the printing system
updated drivers to HPPrinterDriver2.16.1
Repaired permissions

Hi zmogy,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to print on the 10.9.
I will be happy to help you.
The HPPrinterDriver2.16.1 is the latest HP printing and scanning software for OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
Plug the printer directly into the 10.9 computer and run the Apple Updates to install the Apple drivers.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Test the printing.
I can't guarantee it will print over the server.
Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

Firefox 13 or 14 won't print after upgrade

After upgrading from FF 13, I am no longer able to print from any website--the system print dialog box fails to open. This bug is also present in FF14 Beta as well.
I have already attempted to reset printer.printer (all of them) from about: config with no success. If I roll back to FF12, the bug is still occurring. The only solution that I have found is restoring a previous restore point.
Selecting print within print preview or control+p does not work as well.
I have also started FF in safe mode with no plugins/add on's with the same result.
Does anyone have any other suggestions?

Hi jscher2000 -- You're are correct, there is no error message, and no print dialog. I already tried changing the default printer on the system level and the same bug is occurring.
cor-el -- I have reset FF and created a new profile, sadly, nothing has changed.
I'm am thinking there may be a .dll change with the new update that is affecting the print dialog; but that is just one possible theory.
While researching this on Google, it appears that this has happened to others in the past with various version, however, there was no solution.
More ideas would be appreciated. In the meantime, it looks like I'm going to restore a restore point and use a previous version until there is a fix or workaround.

Cleanup after upgrading from Vista to Windows 7

I have installed (upgraded from Vista) Windows 7 on my X301 machine. I am wondering if thedata on the drives Q(lenovo) and S(Servicev003) is still needed?

only if you want to recover to vista the Q partition is used for creating recovery disc the s partition is used for recovering to factory state which would be vista
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

PDF files won't open after upgrade from 9 to 10 or 11

After upgrading from Reader 9 to Reader 10, I lost the ability to open PDF files on my Win 7 laptop. Even the icons became blank white blocks. I reinstalled Reader 9 and it all worked as usual. In trying Reader 11, it happened again. Any thoughts?

Thank you for your reply. Allow me to clarify.
After installing Reader 10 or 11, the icons for PDFs on my desktop changed from the typical PDF icon to a blank white icon like when the extension of a file has been changed or omitted. Double clicking the icon no longer opens the PDF file. Yes, Reader opens but I no longer was able to open any preexisting PDF files using the new version of Reader. I did try changing away from protected mode to no avail.
I do not have a screen shot as I have downgraded to Reader 9. I have scanned thoroughly for malware and viruses and none have been found.
Thank you again. I look forward to your further comments.
Sent from my iPhone.
Please pardon brevity, misspellings, and autocorrect hijinks.

HP Solution Center doesn't work after upgrade from Vista to Win7 64b

Two problems. 1) Upgraded Dell 1737 Notebook from Vista Home Premium to Windows 7 64b. HP Solution Center no longer works. Have HP Officejet Pro 8500 A909a printer hardwired into router. Downloaded new printer drivers, still cannot print. 2) Cannot get Solution Center to execute. Message says can't find "SolutionCenter.msi". No Win7 upgrade for Solution Center on HP site.

Hello ReallyFreeBob,
Lets first try Uninstalling the existing printer software using the listed steps..
Press the keys Win + R, a RUN box would open. Type in the command %TEMP% in the box and hit OK button.
A temp folder would open, locate for the folder name begning with 7z..... , open it , then do the following ..
Locate for folder "UTILS" and double click to open it. Locate for folder "CCC" and double click to open it. Locate for file Uninstall_L3.bat and double click to Run it. Follow the onscreen instructions
After the uninstallation is done you may have to restart the PC.
Then download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Need to Re-activate CS4 after upgrade from Vista to Windows 7 (32 bit)

I have a laptop running Vista 32-bit with Lightroom 2.7 and Photoshop CS4 installed. I'm planning to upgrade the computer from Vista 32-bit to Windows 7 32-bit, upgrading in place to avoid having to reformat and reinstall all the software. Will Photoshop still be activated after the upgrade or will I need to re-activate it? If I need to reactivate, will the OS change make the activation process think the software has been moved to a new computer? It is currently activated on two machines (one of which is this laptop) as it is and don't want the activation wizard to think I'm putting it on third machine in violation of the license. Should I de-activate it before upgrading the OS and then re-activate once the system upgrade is complete? After the OS change I plan to upgrade the Adobe software to Lightroom 3 and PS CS5 - does the activation of CS4 even matter in that case? Anyone done a Vista->Win7 upgrade in place and offer any suggestions?

You are a brave man indeed, John.
An in-place upgrade is still a bad idea though.
-Noel

Pre7 after upgrade from Vista to Windows 7 (Ultimate 64bit)

I recently upgraded my Vista Ultimate (64bit) computer to Windows 7 Ultimate (64bit). This was an upgrade, not a clean, fresh install. Today is the first time I have tried to run PRE7 under Windows 7. Prior to the upgrade, I had no problems to speak of with PRE7 and the PhotoShop.com Plus account that I set up with it. Now whenever I start PRE7 under Windows 7, I get the "Install Full Content" dialog informing me that a reduced set of content has been installed and that I need to install the full set of content from the installation DVD. Now believe me when I say that the full set of content was installed under Vista and that I never got such a dialog box prior to Windows 7. In addition, after clicking OK to continue, the PhotoShop.com membership did not log on automatically as I am used to it doing. I don't remember exactly now what I had to do, but to the best of my recollection, after I logged on to my account it was telling me that I needed to verify my account, which I did. I subsequently received an email with a verification link in it. After clicking on the link my account was verified and now when I start PRE7, it automatically logs me on to my PhotoShop.com account, as I am used to it doing. I still get the "Install Full Content" dialog, though. I thought I would ask in this forum if anyone else has experienced these two anomalous behaviors after ungrading to Windows 7, before I attempt to go thorough the motions of actually reinstalling the full content, which should not actually be necessary.
Thank you,
Charles Lawrence

Why it's happening is a mystery. My guess would be that the upgrade in the OS is part of the problem, but that is just a guess. Some have reported that Win7 does the upgrade thing better than any previous OS, but others report all sorts of odd problems, when doing it this way.
If you have the DVD, then I'd try a Repair Install, to see if it picks up the Functional Content.
Otherwise, I am at a loss as to why, when you upgraded your OS, PrE 7 lost the link to that material.
Good luck,
Hunt

Ir remote does'not function after upgrading from Vista to Windows 7

I just upgraded to Windows 7 Pro from Vista Home Premium. I was able to get most of my drivers to work; however, I was not able to find th edrivers/software for my IR remote control. Has anyone else figured this issue out, or what drivers/software I should get fix the error? Thank you.

ArtAppreciator, I have the same problem. Installed Windows 7 and now my HP USB TV Tuner is not working. Worked fine on Vista. I can get passed the signal setup but get an error when Media Center tries to detect the IR receiver. Any thoughts?

G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
When I take a screen shot, the picture shows that both displays appear clear (and in color).
Am I missing something? Thanks in advance for any suggestions

so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
under 10.2 there were less stringent requirements for driving video.
OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
hopefully someone else will run by this topic and offer some insight aside from my own.

C6150 won't print after upgrade from Vista to Win 7

Similar Messages

Maybe you are looking for