Custom Module-Attachment

Hi All,
In the scenario Webservice to RFC synchronous, I need to use custom module in the RFC adapter to create a attachment in the response message
Whether I need to use the custom module before the RFC standard module or after the standard module.?
Also If I select "Keep Attachments" in the sender soap adapter, can we monitor this in XI ..?
Regards
Prakash

Hi
Before the default module .
chk this also
Custom Module
rgds
Arun

Similar Messages

Create a PDF as attachment in custom module in mail receiver adapter

I'm trying to create a PDF attachment to an email using a custom module with the following codes. The attachment was created and sent, but when I tried to open it, I got the following error message: the file cannot be read either because a invalid encoding or the file is damaged.
Anybody knew if I did anything wrong in the way I'm opening and creating the PDF attachment below?
// add a new pdf attachment to the message
FileInputStream fi = new FileInputStream("c:/ftmailxi.pdf");
byte[] attachmentContent = new byte[fi.available()];
Payload attachmentPDF = msg.createPayload();
attachmentPDF.setName("ftmailxi.pdf");
attachmentPDF.setContentType("application/pdf");
attachmentPDF.setContent(attachmentContent);
//adding our this pdf as an attachment
msg.addAttachment(attachmentPDF);
//provide the XI message for returning
inputModuleData.setPrincipalData(msg);

This will surly help u
/people/sravya.talanki2/blog/2006/11/28/e-mail-xml-messages-in-pdf-format-from-sap-xi
Check this out
Mail with attachment.
Regards,
Prateek

Custom Module

Hi All,
Is it possible to add custom module to RFC adapter..? Also using custom module is it possible to convert a payload into attachment in XI..?

Hi,
Generally The RfcAdapter will use one which is called 'localejbs/RfcAFBean'. This can be configured in the Integration Directory for each communication channel on the tab 'Module'. If the list is empty on this tab, it defaults to the EJB named above and nothing has to be done. So if no modules should be used, everything will work without a special configuration. If some custom modules are configured to be used, the last module always has to be the RfcAdapter module. This will establish the communication between the adapter and the Adapter Engine.
Can you go through the below urls which may help you in developing a new module processor:
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
/people/gowtham.kuchipudi2/blog/2006/01/04/testing-sample-adapter
Also go through the help which might answer your queries:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
Thanks
Swarup

Printing java layer error stack in a custom module!--Experts, please reply!

Hi to all OAF experts,
We are in a process of making a fully customized module, which is integrated with OM and other modules, and takes the place of Quoting module. There is beasically a custom module which takes the place Quoting module in Apps in Order to cash cycle. Now in the final page of this module where we submit the quote, we need to through the entire Java layer error stack, similar to what is done in stanadard quoting module. There they use AOLMessageManager class for this purpose. But since quoting module is in JTT/JTF framework and our custom module is in OAF , we were looking for alternatives.
I was going through oaf doc and i found a class called OAExceptionUtils, which contains a method called processAOLJErrorStack(ErrorStack)
As per the documentation it says --"Returns an OAException representing the error stack populated by the Oracle Applications user session context AppsContext. ", that is exactly what we need. But , when i use this method, i get error stack as null! Any idea y this is happening? Any alternative how to get this done!
--Mukul

Hi Mani,
What is the source (technology source) of the error?
This is OAF.In a way we have developed entire quoting module from scrath .I believe you would be embedding the Quoting (JTF) pages on to your custom OAF pages. This is similar to how it is implemented in the Standard Sales module.
We are using same quoting APis to create quote. Our code only goes in JTF tech only while entering in and of configurator.Is your requirement to read the java error stack (JTF Code) from the standard quoting application (embedded in your custom OAF Page) in your Custom page's controller (OAF Code)?
Yes, we can create quotes from quoting as well as from our custom table,the only difference is that if you create aquote from quoting, it does not updates our custom tables. We want to throw the same java error which quoting throws, while submitting a code in our oaf controller. It throws even Order management error messages!Any idea how we can go about this..!
--Mukul

Customer Module Deployment in PI 7.1

Hi All,
We have a custome adapter module developed in PI 7.0 and we have upgraded that to PI 7.1 based on the guidelines from SAP. Now we would like to deploy that upgraded module in new PI 7.1 server. Could any one please tell me how can i deploy the new custom module.
Please suggest me various methods of doing it.
Thanks in advance.
Best Regards,
Prasad Babu.

hi,
refer to:
http://help.sap.com/saphelp_nw70/helpdata/en/87/4797422930c56ae10000000a155106/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00838345-708c-2a10-1199-9514c0b0a91c
regards,
ujjwal kumar

What will be input for custom module developed for JDBC adapter

Hi,
I have a scenario SQLDB -> Xi -> R3 .
Here I have added a custom module before callsapadapter module.
As I know the sequence of module calling will be as follows :
1. Standard jdbc adapter
2. custom module
3. callsapadapter
Standard jdbc adapter has a select query . After that what will be the input format for my custom module .Will it be the xml structure of my source Data type or will it be a resultset or will it be a inputstream(stream of xml fomat????).
And then in which format i need to generate the output format for CallSapAdapter.
Regards

Hello Moni,
SAP has a wonderful feature in ABAP. There are some Runtime Errors that you can catch. This is somewhat similar to the Exception Handling procedure in Java / C++. So here's how you go about it....
Sometimes there might some calculations that we do, multiplication , for example, where the result of the arithmetic operation is known only at run-time. And the recepient for this result may not always be of the right type to take the result. Consider the following code:
parameters a type i obligatory.
data : b type i,
 c type i.
b = 99999999.
** Assume that the user has entered 99999999 for the value of the parameter a.
c = a * b. " 99999999 * 99999999 "
write c.
This program will certainly give a short dump saying that there was an arithmetic overflow. But we can actually avoid this Shor Dump and handle the situation quite elegantly. consider the following.
parameters a type i obligatory.
data : b type i,
 c type i.
b = 99999999.
CATCH SYSTEM-EXCEPTIONS ARITHMETIC_ERRORS = 1.
** Assume that the user has entered 99999999 for the value of the parameter a.
 c = a * b. " 99999999 * 99999999 "
ENDCATCH.
if sy-subrc ne 0.
write: 'There was an arithmetic overflow in the calculation.'
else.
write c.
endif.
This way you can actually avoid the short dump and make the system set a value for sy-subrc. Based on the avlue of the sy-subrc, you can go ahead with further processing / error-handling, as the case may be.
Here, ARITHMETIC_EXCEPTIONS is called an exception group. For more information on what other run-time errors can be caught, and What the various exception groups contain, please refer to the online documentation for the CATCH statement.
Regards,
Anand Mandalika.

Runtime Error Custom Module Adapter 7.31

Hi experts.
We've developed a custom module adapter to be used in HTTP_AAE sender adapter. The deployement is successfull, the module is started but we are facing this error at runtime:
Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_IN_MODULECHAIN, null
¿Any idea what can be happening?
We are working with version 7.31 SP 10 Java only stack installation.
Thanks a lot.
Kind regards.
Christian.

Hi Amit.
Thank u so much but your response.
Regarding your quesion, yes I have done it.
Regards.
Christian.

How to collect debug logs for custom module only in EBS by AppsLog.write?

Hi,
Customer is trying to retrieve logs for their custom module (XXKCZ) and
put it to /log/kcz.log by using AppsLog.write() method. (refer to sample code below)
Customer has set these profile values in the application level and removed the values
in the site level. But the file /log/kcz.log is created but does not have any lines in it.
Is there something wrong to the coding of AppsLog.write?
Application Name "xxkcz"
　FND: Debug Log Enabled "Y"
　FND: Debug Log Module "xxkcz%"
　FND: Debug Log Level "UNEXPECTED"
　FND: Debug Log Filename "/log/kcz.log"
　---- [Sample Code starts] ----
　Package jp.kaikei.oracle.apps.xxkcz.util.server;
　import oracle.apps.fnd.common.AppsContext;
　import oracle.apps.fnd.common.AppsLog;
　import oracle.apps.fnd.common.Log;
　public class CommonLog{
　public void initLog() {
　AppsContext appsCtx = new AppsContext();
　AppsLog appsLog = appsCtx.getAppsLog();
　appShortname = "xxkcz"
　message ="Message started"
　CLASS_NAME = "jp.kaikei.oracle.apps.xxkcz.util.server.CommonLog";
　String moduleName = appShortName + "." + CLASS_NAME + ".initlLog;
　appsLog.write(moduleName, message, Log.UNEXPECTED)
　---- [Sample Code ends] ----
Any advise?
Thanks.

May be some initialization is missing,
I have created my own writetoFile method,
if you want you can try this,
* Method to write the debug messages into a File
public void writeFile(String debugMsg, String userName)
String logDir = (String)this.getOADBTransaction().getProfile("XXPO_OA_PDT_PDT_DEBUG_DIR");
BufferedWriter out;
//DateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy HH:mm:ss");
Date date = new Date();
// if(logDir ==null)
// logDir = "/ebsgld/ebsgldcomn/temp/";
String fileName = logDir+userName+"-pdt_log.log";
//createDiag(XXPO_APP_SHORT_NAME,"[AM]fileName "+fileName);
try
out = new BufferedWriter(new FileWriter(fileName,true));
out.write("\n\n" + debugMsg);
out.close();
} catch (IOException e)
//System.out.println("exception in Writing the log file "+e.toString());
//createDiag(XXPO_APP_SHORT_NAME,"[AM] Exception in Writing the log file "+e.toString());
//Only start and end file
if(debugMsg.indexOf("##########")!=-1)
String impFileName = logDir+userName+"-pdt_imp_log.log";
// System.out.println("File Name is "+fileName);
try
out = new BufferedWriter(new FileWriter(impFileName,true));
out.write("\n\n" + debugMsg);
out.close();
} catch (IOException e)
createDiag(XXPO_APP_SHORT_NAME,"[AM] exception in Writing the log imp file "+e.toString());
With regards,
Kali.
OSSI.

** JDBC Sender Adapter support custom module ...?

Hi friends,
Does JDBC Sender Adapter support custom module ? If it is how it wil work ?
Kind Regards,
Jeg P.

Hi Kulwinder,
We want to separte the records (1:n) returned by JDBC sender adapter XML. ie. Split/Parse the records in XML and then send to BPM (one by one) instead of whole message . For that purpose, we want to write an adapter module.
Is this possible ?
Kind Regards,
Jeg P.

How can I get the code of a Custom Module?

Hi guys.
I'm in a new client, and they have a problem in one of their interfaces. The PI version is 7.1.
The interface uses the Mail Adapter, and there is a Custom Module there. The company that did this module is no longer in this client, and they did´nt leave any document about this module.
So, how can I find the code of this Module?
Regards,
Eric Freitas

Hello,
Check Vadim's reply
Checking code in custom adapter module
Thanks
Amit Srivastava

FND_PRODUCT_INSTALLATIONS TEMPORARY_TABLESPACE IS NULL FOR CUSTOM MODULE

We have 11.5.10 ERP system for production use. But FND_PRODUCT_INSTALLATIONS TEMPORARY_TABLESPACE IS NULL FOR CUSTOM MODULE. All seeded modules are using TEMP.
What are the ramifications for this.
We have 'Change control' process in place. We can not update the table on fly. We need proper justification.
Please help me understand, how this table drives Oracle applications and its performance.
Thanks you all. in advance.
Gopala Medapuram

I agree with Hussein - we have several custom schemas that are registered in FND_PRODUCT_INSTALLATIONS, some of which have the tablespace info correctly filled out while others do not. All of our customizations in all these custom schemas are working as expected. So if your customizations are working as expected, I would not worry too much about it.
HTH
Srini

Decl J2EE auth and auth with JAAS with custom module

Hi Frank:
I have posted another msg where I was trying the non-custom Login module with no luck. In the meantime, I tried the custom module and still having problem. When I click on dlmtest.jsp it brings up the inbuilt login module and not the custom one. My db_schema is "SECURITYTESTER" and pwd = "oracle"
Hetre is my jazn-data.xml
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<jazn-data xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-data-10_0.xsd" filepath="" OC4J_INSTANCE_ID="">
<jazn-loginconfig>
<application>
<name>DBLMTest</name>
<login-modules>
<login-module>
<class>oracle.sample.dbloginmodule.DBProcLM.DBProcLoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>debug</name>
<value>true</value>
</option>
<option>
<name>jdbcDriver</name>
<value>oracle.jdbc.driver.OracleDriver</value>
</option>
<option>
<name>application_realm</name>
<value>Online Trainings</value>
</option>
<option>
<name>plsql_procedure</name>
<value>DBPROCLM.GET_USER_AUTHENTICATION</value>
</option>
<option>
<name>db_schema</name>
<value>SECURITYTESTER</value>
</option>
<option>
<name>jdbcUrl</name>
<value>jdbc:oracle:thin:@localhost:1521:xe</value>
</option>
<option>
<name>db_schema_pw</name>
<value>oracle</value>
</option>
<option>
<name>log_level</name>
<value>ALL</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
</jazn-data>
orien-app is here
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
<orion-application>

<jazn provider="XML" location="./jazn-data.xml">
<property name="custom.loginmodule.provider" value="true"/>
<property name="role.mapping.dynamic" value="true"/>
</jazn>
</orion-application>
My application.xml
has
<?xml version = '1.0' standalone = 'yes'?>
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd" autocreate-tables="true" default-data-source="jdbc/OracleDS" schema-major-version="10" schema-minor-version="0">
<web-module id="defaultWebApp" path="../default-web-app"/>
<library path="C:\jdevstudio10132/j2ee/home/lib/DBLoginModule.jar"/>
So, why is it not bringing up the custom login module. And, I can't authenticate in this case as well.
Thanks for your help (and on your help on the non-customized version of my post)

Hi,
most likely the reason is that the deployed application name is not the same name you provided when configuring the LoginModule (DBLMTest). Its documented in the paper that comes with the LogiNmodules i wrote
Frank

What is the input structure of the custom module

Hi,
I have a scenario SQLDB -> Xi -> R3 .
Here I have added a custom module before callsapadapter module.
As I know the sequence of module calling will be as follows :
1. Standard jdbc adapter
2. custom module
3. callsapadapter
Standard jdbc adapter has a select query . After that what will be the input format for my custom module .Will it be the xml structure of my source Data type or will it be a resultset or will it be a inputstream(stream of xml fomat????).
And then in which format i need to generate the output format for CallSapAdapter.
Regards

See:
*[https://bugzilla.mozilla.org/show_bug.cgi?id=597224 Bug 597224] – HTTP Cache: use directory tree to store cache files
*[https://bugzilla.mozilla.org/show_bug.cgi?id=559729 Bug 559729] – Meta-bug: improve HTTP cache

Where to Store the value from custom Module?

Hi Experts,
I am having Custom Module for altering the payload .From that payload I need to store a particular value.where can i store that that vlaue ?.Custome module is inOutBound.
Regards,
Rajesh.D
Edited by: Rajesh Kumar on Sep 18, 2008 1:13 PM

Hi Bhavesh,
My scenario is Idoc to WebService.In custom module i had called webservice through http call it had returned connection id.Payload is passed with connectionID to Web Service for calling other methods.Next i have to close the connection with Same Conncetion ID in another Custome module.so i have to store some where and reterive in my module.pls help
Regards,
Rajesh.D

Save a variant in a custom module-pool.

Hi all,
i hope there is someone that can help me.
My problem is: i've to save a variant in a module-pool custom SAPMZ...ecc.
Is there a function module or a routine or some specific ABAP istruction to save a variant?
I ask this because in my custom module-pool i've insert input field in main dynpro.
Thanks a lot,
regards,
Alex.

Please use below code it works for me:
What I did was copy the function group SVAR. When it asked what function module to copy just select
'RS_VARIANT_SAVE_FROM_SELSCREEN' and renamed it to 'ZS_VARIANT_SAVE_FROM_SELSCR'.
DATA: lv_screen LIKE sy-dynnr.
CLEAR: t_rkey, t_screen.
REFRESH: t_rkey, t_screen.
t_rkey-report = sy-repid.
APPEND t_rkey.
t_screen-program   = sy-repid.
t_screen-dynnr     = '0101'.
t_screen-type      = 4.
APPEND t_screen.
lv_screen = '0101'.
EXPORT lv_screen TO MEMORY ID 'MZ_COMISSION_REPORT_F02_SCREEN'.
CALL FUNCTION 'ZS_VARIANT_SAVE_FROM_SELSCR'
    EXPORTING
      curr_report          = sy-repid
      vari_report          = sy-repid
    IMPORTING
      variant              = w_variant
    TABLES
       p_screens           = t_screen
     p_sscr               = t_selctab
     p_vari               = t_vari
    EXCEPTIONS
      illegal_variant_name = 1
      not_authorized       = 2
      no_report            = 3
      report_not_existent = 4
      report_not_supplied = 5
      OTHERS               = 6.
t_rkey-variant = w_variant.
MODIFY t_rkey INDEX 1.
CALL FUNCTION 'RS_RWSET_SAVE_VARIANT'
    EXPORTING
      rkey    = t_rkey
    TABLES
      selctab = t_selctab.
Then in program LZSVARF07 function save_as_variant find where it's transfering the screen.
READ TABLE variscreens WITH KEY dynnr = sy-dynnr.
IF sy-subrc NE 0.
    IMPORT lv_screen FROM MEMORY ID 'MZ_COMISSION_REPORT_F02_SCREEN'.
    IF lv_screen IS INITIAL.
      variscreens-dynnr = sy-dynnr.
    ENDIF.
ENDIF.
PERFORM fill_varidyn TABLES p_dynsfields
                       USING $rkey space. "Kein import von DYNSFIELDS
Good luck!
Edited by: Alex Nguyen on May 2, 2009 1:36 AM
Edited by: Alex Nguyen on May 5, 2009 5:26 PM

Custom Module-Attachment

Similar Messages

Maybe you are looking for