Custom Oracle Report errored with Enter Password: REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error: REP-300: ORACLE error occurre

Hi Gurus
We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Can any one help us
Thanks in advance.
Kumar

Please see
REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
ApPsMaStI
sharing is Caring

Similar Messages

REP-0004: Warning: Unable to open user preference file.

Hi,
I am creating an invoice header in Payable through open interface in r12. I have inserted one line in ap_invoices_interface table.
When I run Payables Open Interface Import request, it completes normal but invoice does not create.
Please see below log file and provide your guidence.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXIIMPT module: Payables Open Interface Import
+---------------------------------------------------------------------------+
Current system time is 24-DEC-2013 12:39:46
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='MANUAL INVOICE ENTRY'
p_batch_name='test4'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='19334'
p_login_id='2499994'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 24 12:39:47 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Regards
Farooq

Please also see if the following docs help.
R12: Master Troubleshooting Guide for Supplier Contacts Open Interface Import Report (APXSCIMP) [Video] (Doc ID 1373699.1)
R12: REP-0004 Error While Running Supplier Contacts Open Interface Import Program (APXSCIMP) (Doc ID 1195815.1)
R12: APXSUIMP Ends With REP-0004 Error, But Output Does Not Display Reason for Rejection (Doc ID 1060824.1)
Thanks,
Hussein

REP-0004 warning: Unable to open user preferance files

Hi,
I am new to R12. This is the upgradation project 11.5.1.2 to R12. we are newly installed the R12 application and 10g database.
I am going to customize the standard report 'Printed Purchase Order Report', the rdf file is 'POXPRPOP'. but it is not getting any out put and xml tags also. even standard report also not getting any output and I noticed in logfile that the error like 'REP-0004 warning: Unable to open user preferance files'.
I have tested in backend, its getting the data. then I have added command MO_GLOBAL.SET_POLICY_CONTEXT('S'.org_id) in before report trigger also. but getting same issue.
Could you please help me wheather I need do any setups/modifications in RDF or Application. This is very urgency.
Thanks in Advance.
Regards,
Thirupathi

Hi Hussein,
Thank you for your valuable response.
I have followed the same steps for this customization what they are given in the metalink ID 374165.1.
And one more thing, I am not getting any output if i ran the standard program 'Printed Purchase Order Report (Portrait)' in R12. what it could be the problem.
Regards,
Thirupathi

REP-57054: In-process job terminated:Terminated with error:

Hi All,
I using R12 application and using 10g report devloper.
When i run the report it is giving the below errors, can any pls check and suggest me. I had one more parameter as customer From, To and its is not mandatory. So am not passing the value.
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='131'
P_DIVISION='100'
P_REPORT_DATE='2010/10/04 00:00:00'
P_CURR_TYPE='Local'
P_TYPE='Open'
P_BUCKET_TYPE='Month'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: 1:
MSG-00002: 2:
MSG-00003: 3:
MSG-00004: 4:
MSG-00005: 5:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.2.0 - Production on Mon Oct 4 12:46:23 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4301855.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 4301855 on node APPSPRD at 04-OCT-2010 12:46:25.
Post-processing of request 4301855 failed at 04-OCT-2010 12:46:25 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 04-OCT-2010 12:46:25
---------------------------------------------------------------------------

Please see
REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
ApPsMaStI
sharing is Caring

Active users report shows REP-0004: Warning

Hi,
Active users request logfile showing
Enter Password:
REP-0004: Warning: Unable to open user preference file.
How to solve this wraning?And actually what it means
Regards

Hi,
Have a look at the following documents and see if it helps.
Note: 742122.1 - Reports Fail With REP-0004 REP-3000 REP-0069 REP-57054 On a Cloned R12 (12.0.4) Instance
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=742122.1
Note: 210795.1 - Troubleshooting Guide for REP-4 error
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=210795.1
Regards,
Hussein

Error message: "Unable to open the physical file" when trying to attach AdventureWorks database

I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

[SQLSTATE 22001] (Error 8152)Unable to open Step output file.

Hi,
I have configured the backups from our SQL Server instance to tape directly with out storing in the local drive, so that the disk space allocated for storing the backups in the local drive is saved.
but i end up with the below error.
Executed as user: CORP\devsqlservice. select DATABASE_NAME = db_name(sd.database_id) from sys.databases sd where -- ONLINE
sd.state = 0 and sd.is_read_only = 0 group by sd.database_id order by 1 [SQLSTATE 01000] (Message 0) String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)Unable
to open Step output file. The step failed.
I am clueless , why i face this error, Do any one of you face such problems in backup (scheduled backups) job.
hemadri

Hi Hemadribabu,
>>”string or binary data would be truncated”
As my research, the error above could occur in the case of passing string or binary data, whose length is larger than received object. So I recommend you to run the Transact-SQL script in SQL Server query window to check if this kind of issue exists, or
you can post your entire script for further analysis.
>> “unable to open step output file”
In addition, as for the error above, this issue can be caused by two reasons below.
1. The path of the output file is invalid. To fix the issue, please follow the steps below.
    a. Double click on the SQL Agent job.
    b. Switch to Steps tab, and click Edit.
    c. Click Advanced option.
    d. Change the path under Output file or delete the path. For a UNC path, you can
map a network drive and use the network drive instead.
2. Your account doesn’t have access to the folder. Transact-SQL job step runs as the owner of the job step, or as the SQL Server Agent service account. So please check the type of the job step and the account which your job step runs as, and make sure that
it has access to the folder. For more information about the process, please review the similar thread:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/7610b484-98b7-42dc-816f-dbc884e84c6d/backup-database-permission-problem
Regards,
Michelle Li

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

How can i protect a folder with a password so everytime i want to open it it requires my password?

how can i protect a folder or application in iPad with a password so everytime i want to open it it requires my password?

No way to do so at this time.

Numbers error msg: "Unable to open ' .' Unknown file type."

I last updated this doc 4 days ago, saving it every time I update it. I use it to track my children's school hours throughout the year. I have since restarted my Mac. I went to open this file today, and am getting the error message, "Unable to open ' (name of file)' Unknown file type.
When I search for the doc under the spotlight, the name of it appears & it is listed as a Numbers doc, but I can't open it.
Any ideas for a work around? I haven't backed it up in several weeks, so I'll be very sad if I can't retrieve it at all!
Thanks for your help.

Have a look here http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache
PS: Error 2 u 2

REP-0756: Warning: Unable to find PL/SQL library 'FARSV' and 'fadolif'

I would like to compile a modified report using Report Builder 6.0.8.11.3 for OFS ver 11.5.10.2, and I got this error message:
during load report
REP-0756: Warning: Unable to find PL/SQL library 'FARSV'
REP-0756: Warning: Unable to find PL/SQL library 'fadolif'
during compilation
identifier 'FA_RSVLDG' must be declared
identifier 'FADOLIF' must be declared.
Following this url: http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/oracle-reports-customisation-for-oracle-financials-11i-108537
i have tried:
download the FARSV.pll and fadolif.pll from $AU_TOP,
from regedit, it shows that the (the key: HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\HOME4, the report builder is executed from C:\OracleDeveloper\BIN\RWBLD60.EXE)
FORMS60_PATH=C:\OracleDeveloper\TOOLS\OPEN60\PLSQLLIB
REPORTS60_PATH="C:\OracleDeveloper\REPORT60\ADMIN\TEMPLATE\US;C:\OracleDeveloper\REPORT60"
i put the files in one of the above directory, the errors during load is no more, but errors during compilation still there..
i put the files in all three directories, the errors during load is no more, but errors during compilation still there..

Hi,
I would like to compile a modified report using Report Builder 6.0.8.11.3 for OFS ver 11.5.10.2, and I got this error message:Custom report or seeded one?
For the REP-0756 error, please see these docs.
Note: 837288.1 - REP-0756 unable to find PL/SQL Library when generating Oracle Application Reports
Note: 337302.1 - Error REP-0756 Unable to find PL/SQL library 'inv.pll' when Opening Report POXPRPOP in Reports Builder
For the ""must be declared", what kind of change in the code you have done?
Thanks,
Hussein

REP-1401: Warning: Unable to find PL/SQL library

Hello,
I am running a 10g report from web using rwservlet and i faced this problem when running a report that is attached to library. it displays the following message: REP-1401: Warning: Unable to find PL/SQL library.
Although i put the .pll and .plx in the same directory where the .rep files are located.
Please tell me what can I do to solve this problem.
Thanks.

i am using this url link in running a report
http://<servername>:7778/reports/rwservlet?report=<report_name>.rep&destype=cache
when i run a report without external library is attached to it, it works fine..
But when external library is attached.. it displays error message.
Please tell me what can i do?

Please help me solve--REP 1804 unable to open printer definition file 'dflt

Kindly help me solve this error.Im a novice and trying to generate a report but this error REP 1804 unable to open printer definition file 'dflt' comes up...

Good morning,
Reports is trying to open the default printer defined on the system. Are you running this in Report Designer? or is it running on the Report Server. If you are running in Report Designer on your own PC, check the default printer on your system. If you are running on the Report Server, check the default printer defined on the server.
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)

Custom Oracle Report errored with Enter Password: REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error: REP-300: ORACLE error occurre

Similar Messages

Maybe you are looking for