Custom pages - only one shows up on the summary page
hello, i have two custom pages, one allows the user to pick the site location and the other allows the user to pick the computer model. when i launch the udi preview only the choices from one page are shown on the summary page? how can i fix this
thank you.
Hello,
Thank you for your replay. Actually the page number is on the Page Foot. Is any one has the same problem ?
Your input is grate appreciated !
Lin
Similar Messages
-
Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?
One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me. -
I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'
I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'
-
Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.
-
When creating a comment summary, I want to end up with a pdf of comments only. In addition, I do not want author, date, time, or page number to show in my comments summary. How can I do this? I do a lot of reading, and when I summarize my comments, I like to save these comments in a larger document I compile over time. I typically create a comment summary, export it to a text editor and find myself having to delete author, date, time, page number, and anything else that is not the raw and net comment. It would save me some good time if someone showed me how to do this. The reason I do not want any additional information is because it simply adds stuff I do not need in my compilation of summaries for large amounts of papers over time.
What you're describing can't be achieved using the built-in comments summary function of Acrobat, but it can certainly be done if a custom-made script it used to generate the summary because then you're in full control of what's included in it and what's not.
-
Cross Farm: User Profile Custom Properties do not show up in the consumer farm web applications
I have a two SharePoint 2010 farms, one is the publishing farm and user profile service is running on this farm. I have defined a couple of new custom properties, and after a while these custom properties do not show up at the consumer farm end.
So, on the publishing farm, I can udpate the user profiles with values in these custom properties. However, neither the custom properties nor the values got synchronized to the consumer farm. What puzzled me further is that some of the existing custom properties
exist on the consumer farm, but not the new custom properties I recently added.
1. I have made sure the application pool accounts on both the farms being added to the administrators with full control permission in UPS on the publishing farm.
2. The User Profile Service proxy (connected to the publishing farm UPS application) is associated with all the web applications on the consumer farm.
3. When values in the user profiles on the publishing farm changed, these changes do not get replicated to the consuming farm user profiles. This symptom occurs on both custom and OOB user profile properties.
However, I cannot find any other related information on the web, nor from the ULS logs.Hi,
As I understand, it did not display the new custom properties you defined in the publishing farm at the consumer farm end.
1. Check if the topology Discovery Service Application runs well in consuming farm. In the Central Administration, it is the Application Discovery and load Balancer Service Application, check if it starts.
In the IIS, it is the topology, check if it starts.
2. Check the permissions have been established if you have established consumer farm permissions on Provider Farm before you publish the service application.
1. Go to Central Administration and going to “Manage Service Applications”.
2. Click on “Application Discovery and Load Balancer Service Application” and click “Permissions” from the ribbon.
Your farm GUID should be listed with full permissions.
The article is about Shared Service Architecture in a multi farm environment
http://blogs.msdn.com/b/russmax/archive/2010/05/06/sharepoint-2010-shared-service-architecture-part-2.aspx
Best regards
Sara Fan
TechNet Community Support -
I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?
That is not the issue.
Pages/OSX does not save files with crop marks and bleeds.
It also by default saves transparency, which is involved in a lot of Pages' better features, at a rubbishy 72 dpi resolution.
It also makes it extremely difficult to maintain mono-color like black only text, has no spot color and makes color management opaque.
It really is only meant for amateur publishing and printing to your desktop printer.
A commercial printer who is willing to use and print from Pages may have better results but at the cost of considerable micro-management which defeats the point of this "cheap" solution.
Peter -
Pages won't show up in the area of iTunes where files are transferred.
I want to pass Pages docs from my iMac to my iPad via iTunes and the sync cable but Pages doesn't show up in the bottom area. Only thing I'm thinking is that I have the box checked that allows the Cloud to sync with all my Pages documents. Could that be affecting my ability to pass documents to the iPad via iTunes and sync/transfer cable?
Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7 -
Can I set a password, so that I am the only one who can delete the viewing history?
I have a teenage boy, and he keeps browsing adult web pages; is there a way to set a password on the history content, so that I am the only one allowed to delete the content? I would like to know what my son is looking at before he erases the content.
To set a passcode for your iPad, go to General > Passcode Lock, then tap On or Off. Is that what you're looking for?
If you want to set access privileges for your whole network, OpenDNS allows you to customize that:
OpenDNS doesn't discriminate among your computers though, so its settings will apply to all iPods, iPads etc. using your network.
It's free! -
Imaqdx multiple cameras show as Local Area Connections in System tray, but only one shows up in MAX.
I have two GigE cameras (Pulnix 4200GE) in my system, each having it's own NI GigE Vision Adapter. The adapters show up in Network Connections and in the system tray as "Local Area Connection" (LAC) and "Local Area Connection 2" (LAC2). However, I can only see one camera at a time in MAX. If I start with both adapters disabled, then enable LAC followed by LAC2, I see one camera (cam0), then both (cam1 shows up) but about 6 seconds later the second camera (cam1) disappears! If I enable the adapters in the reverse order (LAC2 followed by LAC), only cam0 shows up. I can see each camera alone by disabling the other adapter but I cannot get them both to stick around.
There is also an anomoly in the MAX display of the cameras. If I right-click the camera in the NI-IMAQdx folder the context menu has a 'Camera->' sub-menu which shows both cameras even if one has had its adapter disabled. And regardless of which camera I see (cam0 or cam1) the list shows the same camera is checked. This is in conflict with the data showed in the Camera Information tab of the attributes pane in MAX, which shows a different camera (ID'd from the serial number) based upon which one shows up in the folder list. And changing the selection check-marked in the 'Camera->' sub-menu has no effect on the information displayed in the attributes pane.
I have followed the troubleshooting guide and they are both DHCP-enabled and have Auto private addressing enabled. I have updated the Adapter drivers. This is a NI PXI system running Win XP.
Thanks in advance for any help!
JesseIf you are running Windows XP you need to go to the network settings tab in Windows and bridge the two "NI Gige Vision Adapter" ports together (select both, right click and select option to bridge network adapters). This is due to a deficiency in Windows XP where multiple adapters within the same logical subnet (the link local address space, in this case) are not able to be used independently for broadcast traffic. This workaround is not needed on Windows Vista or later.
The details you are seeing by right-clicking the camera in MAX is the list of camera files (saved settings) that can be associated with the camera. You probably have two because both were visible at one point or another to IMAQdx and so unique ones were created. They are probably both associated with the same camera file because if they are both the same model name we have some logic that assumes that if one is removed and a new one is attached, to use the previous camera file. This only happens in certain circumstances---normally if you start with one camera and add a second (or start with two) they will both get unique files created to store their settings. In your case you can use MAX to set the correct association as needed.
Eric -
my apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?
Restore.
-
How do I get the music icon to show up on the home page of the touch? Under the settings icon it shows the songs are downloaded.
- Move the Music app icon to the home page. It is usually easer to do it on the computer than on the iPod itself. The manual says how to move the apps.
iPod touch User Guide (For iOS 5.0 Software)
- I do not undersand what: "Under the settings icon it shows the songs are downloaded." means. -
can anyone tell me how to restore my itunes library and playlists? After I downloaded mountain lion my library is missing and my devices can be synced to only one library ...the missing one
That .itl file actually is the library -- at least the critical part of it although the library is actually many files and folders.
Try starting iTunes and immediately hold down the option key. When it asks, guide it to the .itl file.
It's really hard to say without being able to poke around your computer. Upgrading should not delete the old library, but still it happens to the very, very few which is why we make backups before updating. If the old library file is gone then so are your playlists. You can always see if the following is of any use:
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451 -
I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?
No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea. -
My new podcast episodes are not showing up on the main page
my podcast page hasn't updated in 2 weeks even though i've been adding new episodes to my feed:
http://www.cofc.edu/~hiottm/RSS.XML
When i click SUBSCRIBE, i see the newest episodes there, so iTunes is reading my feed correctly, but why aren't they showing up on the main page?
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=200063590
Does anyone know if there is a LIMIT to how many will show up on that main page? I have 45 being displayed, but my feed has 59 separate items. I've not read anything that indicates there is a limit.
any help would be appreciated!!
Windows XPmy podcast page hasn't updated in 2 weeks even though
i've been adding new episodes to my feed:
http://www.cofc.edu/~hiottm/RSS.XML
When i click SUBSCRIBE, i see the newest episodes
there, so iTunes is reading my feed correctly, but
why aren't they showing up on the main page?
http://phobos.apple.com/WebObjects/MZStore.woa/wa/view
Podcast?id=200063590
Does anyone know if there is a LIMIT to how many will
show up on that main page? I have 45 being
displayed, but my feed has 59 separate items. I've
not read anything that indicates there is a limit.
any help would be appreciated!!
Windows XP
I have exactly the same problem with the feed from my podcast at
http://angus_sessions.podOmatic.com/rss2.xml
My other podcast downloads fine.
The same problem is experience in iTunes on both my Mac and PC so it appears to be aniTunes issue, particularly since Juice has no problem updating using the same rss feed.
It would be great if the iTunes team would comment.
iMAc Mac OS X (10.4.3) Issue also on XP Pro
Maybe you are looking for
-
VPN users can't connect to a Site-To-Site branch office
I have an asa 5510 that allows people to VPN into it. they get a private IP address of 10.1.4.x when they connect. All of my sites (subnets) that are on my MPLS network were always accessible from a vpn connection. these include the subnets 192.168.0
-
Table for Inspection Lot status
Hi, In which table is the inspection lot status stored? Kindly suggest.
-
Hi everyone I need some help on sequencing an application. I am trying to sequence Business Objects 6.5 with all it's dependencies such as Oracle client, Java and MDAC. The application installs and runs with no issues on both Windows 7 SP1 and Window
-
When I print anything on my HP Officejet 8600, the printing is off the page on the right side. Does anyone know how to fix this? I have shut everything down, unplugged the printer,etc. and nothing works.
-
Does anyone have a checklist for supervisors or administrators to help them decide if a CUCM Hunt Group or UCCX is needed to service departmental call distribution? -Users can login/logout of line groups with the HLog softkey. -Calls can be sent off