Custom sort in Project problem

Hello,
I have a project of old family photo scans that I have custom sorted chronologically and on occasion the images will change from the order that I have them sorted. Any thoughts?
Thanks - Scrags

Personally the only times that I have seen something like this is:
One - inside smart albums with a custom sort order and then only on occasions when the content of the smart album changed dramatically.
Two - some sort of project/album corruption.
Try this - make a new album inside a new project and drag the images into it (the album not the project, so they don't actually move to the new project) custom sort the images in the album, not the project and see what happens over the course of your normal workflow)
RB

Similar Messages

Custom sort problem

Hi,
I have a merged dimension created by two queries and a variable which is again created with the measures of these two queries.
They all work fine. However when I apply a custom sort to the merged dimension, the value of the variable disappears in the table. (It's still same after refresh of queries). It's fine when ascending or descending sorts are applied.
Any ideas about this strange behaviour?
Thanks!

XI 3.1 + SP3 + FP3.5
I've found an exact matching note to the case but it's not solved yet (1604268).
The point is, same case works fine in one of my reports but fails in a copy of it. The only difference between these reports is only a few additional dimensions and they are not relevant with the table I'm trying to apply the custom sort. Eventhough I remove these additional dimensions and make same reports exactly same, copy version is still unable to show the values after custom sort.

Maintaining custom sort order when copying between albums

Is there any way that you folks have discovered to maintain the custom sort order of the images in an album when copying these images into a another album? Duping the album is not an answer, as I need to collate the contents of a number of albums into one.
I tried selecting the contents of the album that I had just done the custom sorting in, and making it into one big stack, to try to move that to keep the order. Aperture informed me that stacking only works on images from one project.
OK, since I now know this fact about stacking, is there any good way to merge projects? I have a ton of work on the images in the individual projects, and don't want to redo anything.
Anyway, hope you get the problem, any help will be appreciated.
PowerBook G4 1.67 2GB RAM 128MB ATI Video, External FW Drives for library Mac OS X (10.4.7)

ou must have an older iPod.
I believe the new sort order only works on the new iPods (Nano and Video)

Custom Sort Order (Re-ordering)?

I understand I can't drag and drop in smart collections or in folders with sub-folders. But I should be able to re-order photos in a normal collection by dragging and dropping. This feature has stopped working. Any ideas? Thank you (LR 4.1 with Windows 7, 64 bit)

Followup: I spoke to Andre with Aperture support. He could not confirm this, at first, using a small number of images dragged from project A to Project B. Using a larger number (99 in his case), he was able to confirm the loss of custom sort order. The Apple web site says this has been corrected for import/exports and that is also not fixed. He will refer the problem to engineering for correction in a future update.
I suspect (have no proof) the problem relates to the way Aperture divides each download (from card or camera) to a project into separate folders. To see this, export a project and open it (show package contents). Within the project package are separate folders for each of the downloads to the project. Aperture does not consolidate the images into a single folder. It appears that when a set of images are downloaded at one time is interposed between images taken previously, the sort order is not lost when the images are moved to another project or exported as a project.
I still would like to know if there is a work around for this.

Custom sort order still lost

This was not fixed as reported by Apple with Aperture version 2. When I move custom sorted images from one project to another, or export and import a project with custom sorted images, the sort order is lost. The order after the move, or import is either in file name order or sometimes in a completly random order. This occurs on both my MacBook Pro (late 2008) and my 8 core (16GB RAM) Mac Pro.
This makes it impossible to do efficient work in the field and export the work.

Followup: I spoke to Andre with Aperture support. He could not confirm this, at first, using a small number of images dragged from project A to Project B. Using a larger number (99 in his case), he was able to confirm the loss of custom sort order. The Apple web site says this has been corrected for import/exports and that is also not fixed. He will refer the problem to engineering for correction in a future update.
I suspect (have no proof) the problem relates to the way Aperture divides each download (from card or camera) to a project into separate folders. To see this, export a project and open it (show package contents). Within the project package are separate folders for each of the downloads to the project. Aperture does not consolidate the images into a single folder. It appears that when a set of images are downloaded at one time is interposed between images taken previously, the sort order is not lost when the images are moved to another project or exported as a project.
I still would like to know if there is a work around for this.

Custom sort order right after import

right after an import I start culling and basic editing. From here I will rename, keyword, and proof, than I file the images in the appropriate folder. But before renaming and proofing I may need to change the order of images.
LR does not allow you to change the order of images right after an import unless you have filed the images to a new folder..... Well I need to sort before filing.
Hope this can be done. I think it is simple enough.

Followup: I spoke to Andre with Aperture support. He could not confirm this, at first, using a small number of images dragged from project A to Project B. Using a larger number (99 in his case), he was able to confirm the loss of custom sort order. The Apple web site says this has been corrected for import/exports and that is also not fixed. He will refer the problem to engineering for correction in a future update.
I suspect (have no proof) the problem relates to the way Aperture divides each download (from card or camera) to a project into separate folders. To see this, export a project and open it (show package contents). Within the project package are separate folders for each of the downloads to the project. Aperture does not consolidate the images into a single folder. It appears that when a set of images are downloaded at one time is interposed between images taken previously, the sort order is not lost when the images are moved to another project or exported as a project.
I still would like to know if there is a work around for this.

BUG TEST: Duplicate Stacks in Custom-Sorted Albums?

Before I submit this as an official bug report (through both the ADC site and the regular Feedback page), I’d be grateful to anyone who could take the time to try and replicate this strange behavior.
(I’ve been able to reproduce it on machines in two different Apple Stores, but I’d like to see if it’s as easy to reproduce on other people’s home systems as well.)
Here are the steps which seem to consistently work (i.e. which cause the problem) on my Mac Pro (running the latest version of Aperture under OS X 10.5.6):
1) Create a new Album (from any arbitrary selection of a few pics from any Project); the Album can be at any level in the Inspector’s Projects pane, either within a particular Project or off in a separate Folder;
2) Give that Album a name (don’t just leave as the default “Untitled”);
3) View the Album’s contents in “Browser Only” mode, so you can see all its thumbs (this step isn’t necessary; it just makes what’s about to happen easier to see);
4) The Album’s sorting order (the pull down list in the upper left) should be at the default setting of “Image Date”; change this option to “Custom” by dragging a few of the thumbs around to different positions. This step is critical.
5) Now that your Album’s initial contents have been moved around to create a Custom sort order, make some selections of images from other Projects and add them to the new Album by dragging the selection onto the new Album’s name in the Inspector’s Projects pane...
BUT FIRST... make sure these new selections include Stacks, and aren’t just single images only.
If you’ve done all of the above steps -- and it may take a couple of tries -- re-select the new Album in the Inspector and see if there are MULTIPLE COPIES of the Stacks which just got dragged into it. There may be two copies of each Stack, or sometimes even more. And if there are copies, you won’t be able to simply delete the extra ones from the Album. The only two options you have (short of an Undo) are:
a) Change the Album’s sort order to something other than “Custom” (which only helps until you switch it back to Custom again); or
b) Un-Stack then re-select and Re-Stack each unique Stack which now appears two or more times;
...neither of which is a particularly acceptable workaround.
If even just a couple of users can replicate this bug, I’ll at least know it isn’t just a bizarre coincidence between me and two separate Apple Stores when I write it up and submit it. Or if this is an already acknowledged and well-reported bug, please let me know that as well!
Many thanks,
John Bertram
Toronto

I'm afraid I have an additional twist. In addition to multiple stack (sometimes 5-6 extras) I have "blanks": dotted rectangles. These have no thumbs, and the thumbs won't re-build. Oddly, if I click on the blank, dotted rectangle, a preview does appear after several seconds of a blank gray screen. The files are managed, and if I search "show in finder," they files are found. But there seems to be no way to make the thumbs appear.
I have tried changing the sort order from "custom," but it doesn't affect the blanks.
I've copied these stacks to a new project, and (I think) isolated the problem, but there are 800 of them and I don't relish re-importing them all.
I have wasted days on this problem over the past months, and am very unhappy with this "professional" application.

Custom sorting in data grid

Sorting entire records
Problem:
Assume you have an array of 20 items (master array), and
first 5 items are pulled into another array (paged array),
Which is the dataprovider for the datagrid. And the datagrid
has 10 columns.
When the user sorts on the datagrid, sorting should happen on
the 20 records, and
Not on the 5 records.
What i tried:
Clicking on a datagrid column header will sort only the data
provider of the datagrid. i.e., the
5 records. In order to sort all 20 records, sorting should
take place on the master array,
and not on the paged array. Sorting on 20 items seems to be
impossible.
The only logic we could think of was that, on the
headerRelease of datagrid, capture the
column header clicked(not sure if you can capture it or not).
And write custom function
for sorting based on that column. Since there are 10 columns,
the number of functions
or number of blocks of code to be written will Be 10. So did
not feel to be feasible and optimal solution.
Please advice.

Hello chhavs,
If you listen to the DataGrid's headerRelease event, the event has a property columnIndex to let you know which column the user wanted to sort. So you don't need 10 functions, just one with a switch statement, which is reasonable.
private function handleHeaderRelease(event:DataGridEvent):void
var sort:Sort = new Sort();
var field:SortField;
switch (event.columnIndex)
case 0:
field = new SortField("fieldA");
break;
case 1:
field = new SortField("fieldB");
break;
case ...
sort.fields = [field];
masterRecords.sort = sort;
masterRecords.refresh();
Thanks,
Philip

Webi 4.0 Custom Sort for SSAS Hierarchy

Hi,
I'm using SSAS cube as a source for my webi report .Some report need custom sorting for hierarchy object , we are not able to apply sorting correctly in webi.
What do i need to do in order to apply the custom sorting for hierarchy object? Thanks.

Hi, I've written a post on this:
http://blog.davidg.com.au/2011/09/dynamic-measures-in-webi-on-any-data.html
...and a few people in the comments seemed to have the same problem as you, which seems to be a bug (clicking the ellipsis does not launch the custom values screen).
Perhaps you could try the solution offered by Gallin, which was to create a second input control, then retry the steps to create another input control and click the ellipsis to enter custom values.
Hope that helps.

LR - Creating Custom Sort Orders in Lightroom | The Complete Picture with Julieanne Kost | Adobe TV

Julieanne Kost shows the best ways to take advantage of Adobe Lightroom’s Custom Sort Order feature in this Lightroom 2 tutorial.
http://adobe.ly/y3dj94

This was helpful, Julieanne, however, I have one more question on custom sort order. I am trying to sort a Collection that is made up of photos from several different import files. It's a vacation collection where I have created a different file for each day of the vacation as well as by who took the photos. So i have a file for my daughter's shots, my shots, my son's, etc, to keep things organized. Now that i have selected the "best of" from each original import file, I have created a new User Collection where I am putting them all together. The problem is, my entire Collection won't sort. I want to sort them all by capture time, but LR keeps grouping them by the original file source, and only sorting by capture time within each group. Can you help?

Custom Sort

I have a wierd problem that has been causing me quite a few headaches and i think if there is a way to do a custom order by, it might get rid of this annoynce.
I have an existing script that is five scripts unioned together. When i run the script on it's own, i get the desired result in the desired order, but when i run it through a data window in powerbuilder it is bringing back a different order and i can't figure out why. It's the exact same script.
Anyways, i'm wondering if i can create a custom sort order by, so that i can specify what the first and second fields are and then let the rest fall as they are supposed to:
Here is a look at my Current results:
Equip_# - Read_Desc - Date ----------- Reading
12345 - Consumption - 10/05/2008 - 1101.88
12345 - Consumption - 10/05/2008 - 0000.00
12345 - Summer Peak- 10/05/2008 - 0000.00
12345 - Winter Peak - 10/05/2008 - 0000.00
12345 - Radio Device - 10/05/2008 - 0000.00
12345 - Demand ------- 10/05/2008 - 0000.00
I need the first two fields of the table to sorted as follows and then the rest can just fall into place:
Equip_# - Read_Desc - Date ----------- Reading
12345 - Consumption - 10/05/2008 - 1101.88
12345 - Demand ------- 10/05/2008 - 0000.00
...Doesn't matter how it sorts as long as they two come first
Hope someone can help, cause this really just doens't make a lot of sense and i'm now just trying to get this done and get it behind me.
thanks in advance

Justin Cave wrote:
Can you post the actual SQL statement you are using (or at least the skeleton structure)? You want the ORDER BY to apply to the entire result, not to one individual subquery that is getting unioned with a number of other subqueries.
Is PowerBuilder trying to order the data before displaying it? Obviously, the GUI is free to disregard the order Oracle happens to return results if you've instructed it to sort the data differently.
JustinI don't believe powerbuilder is trying to order the data before displaying it. If it is, it's in a place not easily seen.
Here is my code:
SELECT equipment.equipment_number,
read_class.read_class_desc,
meter_read.effective_date,
meter_read.meter_read,' ',' ',' ',''seal_broken,'1'
FROM equipment,
meter_read,
meter_read_class,
               equipment_type,
               equipment_class,
               read_class
WHERE meter_read.meter_read_class_id = meter_read_class.meter_read_class_id and
meter_read.equipment_id = equipment.equipment_id and
               equipment.equipment_type_id = equipment_type.equipment_type_id and
               equipment_type.equipment_class= equipment_class. equipment_class and
               meter_read_class.read_class =read_class.read_class and
equipment_class.equipment_category = 'EMETER' AND
equipment.current_service_id = 32399 and
               meter_read_class.read_class = 'ECONSUME' and
               meter_read.effective_date=
               (select max(mr.effective_date)
                    from equipment e,
meter_read mr,
meter_read_class mrc,
               equipment_type et,
               equipment_class ec
WHERE mr.meter_read_class_id = mrc.meter_read_class_id and
mr.equipment_id = e.equipment_id and
               e.equipment_type_id = et.equipment_type_id and
               et.equipment_class= ec. equipment_class and
ec.equipment_category = 'EMETER' AND
e.current_service_id = 32399 and
               mrc.read_class = 'ECONSUME')
union SELECT equipment.equipment_number,
read_class.read_class_desc,
meter_read.effective_date,
meter_read.meter_read,' ',' ',' ',''seal_broken,'2'
FROM equipment,
meter_read,
meter_read_class,
               equipment_type,
               equipment_class,
               read_class
WHERE meter_read.meter_read_class_id = meter_read_class.meter_read_class_id and
meter_read.equipment_id = equipment.equipment_id and
               equipment.equipment_type_id = equipment_type.equipment_type_id and
               equipment_type.equipment_class= equipment_class.equipment_class and
equipment_class.equipment_category = 'EMETER' AND
equipment.current_service_id = 32399 and
               meter_read_class.read_class = 'DEMAND' and
--               read_class.read_class_desc not in ('Electrical Consumption', 'Electrical ERT Device') and
               meter_read.effective_date=
               (select max(mr.effective_date)
                    from equipment e,
meter_read mr,
meter_read_class mrc,
               equipment_type et,
               equipment_class ec
WHERE mr.meter_read_class_id = mrc.meter_read_class_id and
mr.equipment_id = e.equipment_id and
               e.equipment_type_id = et.equipment_type_id and
               et.equipment_class= ec. equipment_class and
ec.equipment_category = 'EMETER' AND
e.current_service_id = 32399 and
               mrc.read_class = 'DEMAND' )
order by meter_read, decode(read_class_desc,'Electrical Consumption',1,'Electrical Demand',2), read_class_desc
I've only recently tried entering in the decode in the order by, as someone else suggested and it works fine for individual queries, but when i use it against the whole query (including the Union's), i get the following error:
ORA-01785: ORDER BY item must be the number of a SELECT-list expression

Custom sort grayed out

Custom sort is grayed out on my Lightroom 5 menu. How do I change that so I can rearrange the images?

Something else I've noticed, my users are having intermittent problems with deleting recurring appointments: sometimes they'll try to delete single instances and they won't be deleted.

Custom Sort with a merged dimension in webi report

Hello,
I have a merged dimension (Year/Month - APR 2010, FEB 2010, MAR 2010, JAN 2010, ...), I need to apply a custom sort, but with a merged dimension this feature is disabled. Why? How can I solve this problem?
Thanks & Regards
SU

Hello,
This can be solved by creating a variable for the merged dimension object.
After you have done this you can apply a custom sort
Regards
Rim

Custom sort wierdness

I have an album that contains 57 stacks of images. I have been trying to manually drag the images into a 'custom sort' order while in grid view. When I try to drag a stack into either the bottom position or the next to the bottom last position the stack jumps to the second position from the top.
I can drag images into other locations, just not the last or next to last position. Is anyone seeing this behavior?

I've had this very problem. I took my dual 1.8 G5 to the "Studio" at the Apple store in San Francisco and they could not understand the behavior. So far only one album exhibits the behavior you describe. I've had to take a rest from working with this album (300 NEF files) because there have been so many sorting problems that I can't get the album in order.
PowerMac G5 Mac OS X (10.4.6) dual 1.8 w/4gb RAM

Custom Sort of Duplicated row walues in Webi based on SAP BW Universe

It is a duplicate thread i have already posted in Integration kits - SAP section.
This is regarding custom sorting of row value which are duplicated in Webi which is based on SAP BW Universe.
I have created Webi Report based on Characteristic structure. Using Alerter I provide some space for child node to notify it as child node below a parent node.
Please see a sample table below:
AAAA
onpeak
midpeak
offpeak
BBBB
onpeak
midpeak
offpeak.
If I enable Avoid duplicate row aggregation, i will be able to see duplicate rows for "onpeak" etc. Since Webi does a default sorting, I have to make a custom sort to replicate the structure followed. And in custom sort i dont see duplicated rows, and i see only one "onpeak". Accordingly if I try to sort using custom sort, then the result will be
AAAA
onpeak
onpeak
midpeak
midpeak
offpeak
offpeak
BBBB.
Please let me know if anyone has any solution for this.
I have already created report with modifying the row names in backend by adding letter before its value for example "1offpeak" for the duplicated row and then removing the letter "1" in webi using substring. But i know this is the crude way of doing it.

I have changed the naming convention in BI structure by introducing a white space before the name to avoid duplication and used it in report. Not a good solution anyway.

Custom sort in Project problem

Similar Messages

Maybe you are looking for