Custom winsxs in deployment project

Inherited a VS2008 ActiveX project whose installation fails regsvr32 because of "side by side" error. Have set of DLLs and manifest and catalog that I believe will resolve "side by side" error. But how to tell setup and deployment project
to install the set of DLLs and manifest and catalog into target system Windows/winsxs folder? Thanks.

Carl, thanks for your time. I had seen and read the "Deploy a Setup and Deployment Project" and while it describes something close to what I need, it's not quite what I need. That page shows how to install an EXE and/or DLL that is dependent on
a Microsoft Merge Module, the merge module being found in Windows\winsxs.
I actually need to install some DLLs into Windows\winsxs.
I inherited the DLLs and associated CAT and MANIFEST files as well as matching CAT and POLICY redirection files. I need to get my setup project to install the DLLs and the POLICY redirection in Windows\winsxs but cannot find any documentation describing
how to do that.
Thanks again for your time.
Hello,
For installing these dlls, we could not get that done except the way I have shared as below, did it work for you?
>>If you want tocopy these files to specific folder of target system, you could add that custom folder with the following way.
In the folder list of the File System Editor, select the
File System on Target Machine node.
On the Action menu, point to Add Special Folder, and then click
Custom Folder.
The new folder is highlighted in the folder list.
Type a name for the custom folder.
For example, to target the Temp folder, type "Temp Folder".
In the Properties window, select the
DefaultLocation property and enter the Windows Installer system folder property for the folder you wish to target.
For example, the property for the Temp folder is [TempFolder]. For a list of system folder properties supported by Windows Installer, see
System Folder Properties.
For more information, you could refer to the document and thread below.
1. # How to: Add a Custom Folder to Target a Predefined Windows Folder
http://msdn.microsoft.com/en-us/library/716bxh4e(v=vs.90).aspx
2.
how to copy files to C:\temp in VS 2008 setup project?
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to add a custom field to the "Projects" page "Group by" data menu list

Hi,
I'm deploying Project Online and I want to group projects by a custom field on the "Projects" page. Currently I can see options for group by Project Name, Start, Finish, % complete etc. I would like to group by a custom field of programme name
which is filled in on the Project Details form.
I can create the enterprise field etc, however I can't work out how to make the new enterprise field appear in this list. Or am I barking up the wrong tree and should be creating separate Project Types for each programme?
Any help an advise greatly appreciated.
Regards,
Conrad

Hello, add the programme field to the Project Center view then it will be available to group by. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Deployment projects with other installers inside?

Hello,
I'm developing application with Kinect and I want to create an installer to distribute it. Also, I need to install .NET Framework 4.0 if it is not installed. I'm working with VS 2012, so I had to install InstallShield LE but does not seem to have the option
to add an external installer. Do you know how can I do it? Maybe with WiX projects or Nullsoft?
Thank you!

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I did some search and find an article which may help you:
http://www.microsoft.com/en-us/kinectforwindows/faq.aspx
About deploying projects with Kinect, please reference ‘Can you provide some examples of recent Kinect for Windows
deployments?’ section on that article above. For detailed information and more support, please consult on Kinect for Windows SDK forum:
http://social.msdn.microsoft.com/Forums/en-US/home?category=kinectsdk
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Deploy project using sql query

hi
i am trying to deploy project in ssis catalog using below query.
Exec
catalog.deploy_project@folder_name
=@folder,@project_name
=@ProjectName,@Project_Stream
=@ProjectBinary,@operation_id
=@operation_id
out
getting error:
(1 row(s) affected)
Msg 27203, Level 16, State 1, Procedure deploy_project, Line 139
Failed to deploy project. For more information, query the operation_messages view for the operation identifier '51564'.
also when i m trying to opne ispac file , i am getting error :
TITLE: Failed to launch the wizard
To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or Business Intelligence Development Studio has to be installed by the SQL Server 2012 Standard, Enterprise, Developer, or Evaluation
Edition. To install a component, run SQL Server Setup and select the component name.
BUTTONS:
OK
is this 2 are related,how to solev it

Which version of SQL Server are you using? Are you deploying to a server with multiple instances of SQL Server installed? Are you deploying the packages to different server?
if so does the destination server has Integration services installed ?
Deploying from the command line. In most large organizations, deployments are done by a DBA or systems administrator. In such environments, it's a great practice to use deployment scripts as much as possible to make the deployments
more manageable as the number of SSIS packages increases. In SQL Server 2012, you can deploy SSIS packages using the command-line tool ISDeploymentWizard.exe. This tool works with the .ispac file, which is created in the project's BIN directory when you build
the project in SQL Server Data Tools. The .ispac file for a project typically contains the following:
The project's manifest
All the packages belonging to the project
The parameter file (Project.params)
If you want to see the file's contents, you can change the extension from .ispac to .zip, then open it in Windows Explorer.
To deploy the Test_Project project from the command line, you first need to copy the .ispac file to a shared folder. Then, in a Windows command shell, navigate to the folder containing the .ispac file and execute this ISDeploymentWizard command:
"%ProgramFiles%\Microsoft SQL Server\110\DTS\Binn
\isdeploymentwizard.exe" /S /ST:File
/SP:Test_Project.ispac /DS:<SQL Server Instance Name>
/DP:/SSISDB/MyTest/Test_Project

Customer Downpayment Update in Project Infosystems

Hi,
I am facing problems w.r.t. update of customer down payment in project info systems. As per standard SAP, after doing customer down payments, this will get updated in project info systems (CN41/CN41N).
Please suggest me to fix the issue.
Best Regards,
Ranjan

hi,
Downpayment request is used to create a billing request through
the t code DP 90.This DR can further be used to create a billing document
say invoice.
Actually you will be using these fundas in Resource Related Billing because that is
where the integration between PS and SD module take place with the help of
DR against actual resource utilized in the project.
I hope this clarifies your question and award points if it is so.
Do not hesitate to ask me if you have any further questions in this.
Thanking you,
Best Regards,
R.Srinivasan

How to get the list of deployed projects in OSB through commond line

How to get the list of deployed projects in OSB through commond line; as we are able to get in weblogic.

You can go with standard JMX API using WLST
http://www.oracle.com/technology/sample_code/products/osb/index.html
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e15033/index.html
or you can try a little bit tricky way like
ls $DOMAIN_HOME/osb/config/core/ | grep -v ^_:-)

VBA - Setting Custom Fields For Sub-Projects Using a Master File

Hello,
I was wondering if anyone had any experience or could provide some help with a Macro to set the Custom Fields in Sub-Project Files directly from the Macro. I had this macro working in the past with Project 2007, but it has been a couple years and I am struggling
to resolve an error. I am currently running Project 2010 with SP2. I intend to use this Macro in our Server 2010 environment, however at this time, I'm testing locally on my desktop.
Scenario.
I have a Master File with 2 sub-project (Project A, and Project B) inserted. While working in the Master File, I create a custom field title "TEAM Lookup". While in the Master File and without having to individually go and open, edit, save, and
close each sub-project, push the custom field down to the project files.
ERROR: Currently, the Macro will run and I can step through the lines of code until line 12 where I'm asking Project to use the organizer to shift the newly created custom field from the Master File to a sub-project. The line appears to
populate correctly, but instead of continuing through the loop, an error is caught (ID - 1101 - "The File (Master File) was not found")
Any ideas or suggestions would be greatly appreciated. Thanks
Sample Code
1. Sub CopyCustomFieldToSubprojects()
2. Dim MASTER, custfield, contin, AllDone
3. Dim SubProj As Subproject
4. Alerts False
5. MASTER = ActiveProject.Name
6. Application.EnableCancelKey = pjInterrupt
7. custfield = CustomFieldGetName(ActiveCell.FieldID) & ActiveCell.FieldName
8. On Error GoTo errhand
9. contin = MsgBox("This macro will copy the field " & "(" & custfield & ")" & " (the currently selected field) to all subprojects in this consolidated schedule." & vbCrLf & vbCrLf & "Be
patient, it may take more than 70 seconds to run. You will be notified when it's done. Continue?", vbOKCancel)
10.    If contin = vbCancel Then GoTo done
11.    For Each SubProj In ActiveProject.Subprojects
12.    OrganizerMoveItem Type:=pjFields, FileName:=MASTER, ToFileName:=SubProj.SourceProject.Name, Name:=custfield
13.    Next SubProj
14.     AllDone = MsgBox("The " & custfield & " field has been copied to all subprojects.", vbOKOnly)
15. GoTo done
16. errhand:
17. ret = err.Description
18. ret1 = err.Number
19. done:
20. End Sub

SGBlaine,
Project VBA can get rather fussy about some things so you just have to find out what it wants and then adjust your code accordingly. The following will work:
Note the tweaks to the custfield variable and to the MASTER and source project names. Also when working with strings in VBA it is a good idea to eliminate at least one little gotcha, the need for exact capitalization. Therefore I always add the Option Compare
Text statement. In your macro it won't make any difference since you do not directly create a string value, but it's good practice to have the option.
Option Compare Text
Sub CopyCustomFieldToSubprojects()
Dim MASTER, custfield, contin, AllDone
Dim SubProj As Subproject
Alerts False
MASTER = ActiveProject.FullName 'FullName includes the path, now it can find it
Application.EnableCancelKey = pjInterrupt
custfield = CustomFieldGetName(ActiveCell.FieldID) & " (" & ActiveCell.FieldName & ")"
'strings are very fussy, it has to be exact
On Error GoTo errhand
contin = MsgBox("This macro will copy the field " & "(" & custfield & ")" & " (the currently selected field) to all subprojects in this consolidated schedule." & vbCrLf & vbCrLf & "Be
patient, it may take more than 70 seconds to run. You will be notified when it's done. Continue?", vbOKCancel)
If contin = vbCancel Then GoTo done
For Each SubProj In ActiveProject.Subprojects
OrganizerMoveItem Type:=pjFields, FileName:=MASTER, ToFileName:=SubProj.SourceProject.FullName, Name:=custfield
Next SubProj
AllDone = MsgBox("The " & custfield & " field has been copied to all subprojects.", vbOKOnly)
GoTo done
errhand:
ret = Err.Description
ret1 = Err.Number
done:
End Sub
John

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Deploy project using Jdeveloper with native library (dll)

hi
i need to deploy project using Jdeveloper but the generated jar dose not include native library dll file .

it is ok now
using deployment in properties of project and add new file group of type dependency analysis

Is there a BADI to call custom defined fields in Project Systems (PS)

Hi,
Is there a BADI to call custom defined fields in Project Systems (PS)
The business process is as under:
SRM MDM product catalog is called from PS applcation in ECC using transaction code CJ20N.
Standard fields like description, qty, price etc are displayed and transfered to the PS application.
The requirement is in addition to above mentioned fields, need to display
custom defined (CUST_FIELD1 to CUST_FIELD5) fields and subsequently to be transfered to the PS application.
Pls provide help or inputs.
Thanks,

Hi,
There is customizing in the PS side. PS -> Material-? *(OCI) -> Convert HTML to SAP Fields
Regards,
Masa

Changing the Customer no for unapproved project

Dear Dina,
A new project created with customer A and the project is in unapproved status...at this stage any possibilities to change the customer number to that project...for the same project number...
or
we need to end date the existing project and create new 1.
please advice.
thanks a lot n advance....

Hi
Using the form you could always add customers to the project with zero % of contribution.
If you have a wrong customer assigned to a project, and you have not allocated funds from that customer agreement to the project, you are in a safe place. If you had allocated fund, enter a negative fund line for the wrong customer agreement, and baseline the funding, so it become zero.
Now, even when the system does not allow you to update the customer percentage, you can do it directly on the database using TOOLS EXAMINE or SQL. Update the percentage of the wrong customer to zero, and the percentage of the correct customer to 100%. Since this is an intervention behind the forms, you should do it very carfully. Verify you are doing such update while no user is trying to baseline funding or revenue budget, and also that no one is running GDR or GDI on the same time.
Dina

Deploying Project Server 2013 to an Existing SharePoint 2013 Farm

We recently deployed the following for our new SharePoint 2013 farm:
2 SQL server (alwaysOn config)
2 application servers
2 WFE
1 SQL for Dedicated Search
2 WFE for Dedicated Search
2 Applications Servers for Dedicated Search.
After purchasing a company that uses Project 2013 heavily we are now looking at deploying Project 2013 using our new 2013 SharePoint farm. My question is what is the recommended additional servers that would needed to be deployed to the existing farm?
Thanks,
Ric

Ric,
It really depends on what your current dataset is, and what the load on your SharePoint Server/Project Server. Technically, Project Server can just sit on top of your WFE and App Servers for SharePoint. You do not need a complete separate server group
for Project Server alone, unless there is a special reason to do so.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Not deploying project successfully from bcc atg .

Hi All,
I am trying to create project from bcc atg merchandising and adding one asset(product) in that .
but it stuck in second last step .
I removed cache as well from prod server.
So please atg bcc expert help me.
--Kakasaheb.

Hi kakasaheb,
A full deployment copies all assets from the asset management server to a target site. A full deployment comprises two steps:
All assets are deleted from the target site.
All assets from projects that are currently and previously deployed to the target site are written to that site.
An incremental deployment only updates the site with asset changes from the deployed projects; these changes include add, update, and/or remove operations. This type of deployment is more efficient than a full deployment, especially when few site assets changed since the previous deployment.
Each agent stores the snapshot ID (current installed agent snapshot) that was received during deployment. The Content Administration records the snapshot ID (current effective snapshot) of what it last deployed. The error occurs when the CA server's snapshot ID does not match the agent's snapshot ID.
Hope the information helps you.
Thanks & Regards
Suman Vasireddy
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates.

Problems adding a custom SSRS (PolygonsCRI demo project) control to Visual Studio 2012 toolbox

I've been trying to create a custom control in SSRS using the PolygonsCRI example. I've finally got the solution to compile in Dot Net 4.5 under Visual Studio 2012 targeting x86 architecture. (x86 seems to be the only way to compile without complaints
about architecture mismatch involving some of the key reporting DLLs.) I'm running VS2012 Premium, version 11.0.61030.00 Update 4.
I still can't use it in the Polygons demo reporting project.
I can add the DLL to the toolbox but all I get is a red rectangle and the message 'The custom report item type PolygonsDesigner is not installed'.
Suggestions? I'm out of ideas at this point.

Hello,
You have "add DLL to Toolbox"?
See Jazz Up Your Data Using Custom Report Items In SQL Server Reporting Services => Deploying CRI: You have to Register you CRI in "RSReportDesigner.config" file.
See also MSDN:
How to: Deploy a Custom Report Item
Olaf Helper
[ Blog] [ Xing] [ MVP]

How Do I Use a SINGLE Custom CSS for My Project?

How do I set a single CSS for a project?
Currently, I have linked (I checked, they are actually linked) FM files. The project is Responsive HTML 5 Single Source Layout. It is set up this way:
Project Files
Each FM file has a folder that contains a CSS, an FPJ, any baggage (PNG, for example) and an HTM.
So, for my project, I have 31 such folders.
Above them is RHStyleMapping.css.
That's it
To map my project to a custom CSS, I did this:
1) Created the custom CSS (let's call it TheSingleCSS-sb01.css) and put it in the same location as RHStyleMapping.css.
2) Right-clicked Responsive HTML5 (Primary Layout) in the Single Source Layouts pane.
3) Selected Properties. The Responsive HTML5 Properties dialog box opens.
4) Click Content, select the Apply to all Topics check box, select CSS, and choose my CSS, TheSingleCSS-sb01.css.
5) Click Save and Generate. Generating happens.
6) When prompted, click View Result.
7) Double-click one of the resulting topics, and choose the HTML tab.
8) Notice the following CSS files are referenced, NOT the one I want:
<link rel="stylesheet" href="Configuration_ChangeWorkflow.css" type="text/css" />
<link rel="stylesheet" href="..\..\RHStyleMapping.css" type="text/css" />
<image>
So:
1) How can I replace 32 individual CSSes with one single custom CSS?
2) Also note that Project Manager does not display my custom CSS, even though it is in the same location as RHStyleMapping.css and referenced in the Properties dialog box.
Thanks all,
Sean

Hi, so as I mentioned before, I have used Apply to all and this doesn't work. The resulting HTML still uses a specific CSS for that one HTML file.
1) I put the CSS I want to use, Sean01.css, in the top level of my project using Windows Explorer.
2) I Save and Generate.
3) But, my settings for styles in the CSS are not used. For example, FM_GlossaryDefinition is defined with a 0 left indent but actually uses a 144pt indent (that mirrors the print FM document and that I do not want).
4) And, you can see from the actual HTML, that the Sean01.css file that I applied to all topics (see the first image) is not referenced. What am I doing wrong?
What am I doing wrong? Again, these are imported FM files; this is not linked.
Thanks,
Sean

Custom winsxs in deployment project

Similar Messages

Maybe you are looking for