Custome Event for the Result Set iView
Hi,
does anybody know how to set up the Custom Event on the Result Set iView in order to trigger an event when a record is selected?
I know how to do it using an event Type = EPCF + Event Name + Namespace, but this creates an extra colum on the Result Set iView with the Custom Event name on it, that has to be click in order to trigger the event. I do not want click on this column, i just want to create the event when the record is selected.
Regards
Diego.
Hi Diego,
We are also implementing similar scenario.
We also want to open a window on the clik of any column of the result and if the result is zero we want to trigger some another iView.
So if u have found any solution can u just let me know.
OR else can u just elaborate on ur current scenario using EPCF and custom event.
Thanks in Advance.
Regards Shruti.
Similar Messages
-
Restricting the no. of entries in the result set iView
Hi,
Is there a way to restrict the no. of entries in the Result set iView.
Whenever I create a result set iView , it gets loaded with all the entries of the search table it is associated with.
Is there a way to restrict to say 5 or 6 entries.
Best Regards
Sidk
-
How can i display units only for the result set
hi
i do not want to display units (example: $ or %) for my key figure columns but i want to display units to the result.
how can i do thatHi Surya,
I don't think it is possible to have both non-unit and unit in the same kf.
One potential workaround to do this is to create a calculated key figure/ formula that use the NODIM function for single values. Example: NODIM(0AMOUNT). Then, create a calculated key figure/formula that computes overall result on the same kf and supresses individual values but does not use NODIM....perhaps this can help you work out a solution.
Hope this helps.
Regards,
Petter
Message was edited by: M Petter -
How can I use ONE Text search iView to event/affect mutliple Result Sets?
hello everyone,
i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID). when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
i don't want to have to build 6 different text search iViews (one for each table). i just want to use ONE text search iView for all the different result set tables. but, in the documentation and iView properties, the text search iView doesn't have any eventing.
if you have any suggestions, please help.
many thanks in advance,
mmhello Donna,
that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables. Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
-mm -
Sending an Event to Result Set iView
Hi,
in the standard MDM Result Set iView, there is a provision to generate an EPCF/URL Event. But is there a way to send an event into this standard result set iView?
I want to create a custom filter in web dynpro and filter the Result Set iView.
Please let me know if you know of a provision to do this.
Regards,
NitinThanks, issue was solved.
Ivan,
I am using the following code:
For Item Details
WDPortalEventing.fire(
"urn:com.sap.pct.mdm.appl.masteriviews",
"selectRecord",
"MDMSystemAlias=SAP_MDM_Repository_Customers&MDMTableName=CUSTOMERS&mdmId="
+ rec.getId() //RecordId.
+ "&RefreshSearch=true");
For resultset
WDPortalEventing.fire(
"urn:com.sap.pct.mdm.appl.masteriviews",
"getRecordByIds",
"MDMSystemAlias=SAP_MDM_Repository_Customers&MDMTableName=CUSTOMERS"
+ "&id="
+ rec.getId()) ; //recordId -
Reg: Removing duplicates in MDM result set Iview.
Hi All,
I am using a standard result set iview. Is it possible to remove the duplicates in this iview?
For eg: If i am displaying names in the result set iview, if the same name comes second time,that should not be considered or displayed on the result set iview.
Thanks,
Prasanthi.You might get better results asking in a MDM forum....
-
How do I set a recurring event for the last day of the month on iphone 4s calendar?
I want to set a recurring event for the last day of every month - regardless of the date/number of days in the month. I'd prefer not to have to use an app to do this.
Hi,
You can do this using the custom repeat in iCal. You'll need two events to cover the second and fourth Mondays.
Create the event on the second Monday of the month. In Repeat select Custom... > Frequency: Monthly > On the: second Monday.
Do the same for the Fourth Monday.
Best wishes
John M -
Getting message : The result set for this selection was empty on sm20
Hi,
I assigned below parameters in rz10 :
rsau/user_selection 1
rsau/max_diskspace/per_day 1950M
rsau/max_diskspace/per_file 650M
rsau/enable 1
I activated security audit profile in sm19 also.But when iam going to sm20 for analysis of security audit log iam not getting report iam getting this message : The result set for this selection was empty.
Gudie me for the same.
ThankuHi,
The result set for this selection was empty.
I think your configuration is OK except one thing...
Check in SM19, if you have selected "Filter Active" check box in "Filter 1 and Filter 2" screen and Also "Audit Classess".
Even though security audit is enabled in SM19, without selecting filter it will not log the events and give you the above message.
Regards.
Rajesh Narkhede -
JdbcodbcDriver uses the wrong charSet for interpreting the result set data
Hi everyone,
I?m having trouble getting results from a MS Access database which uses Greek characters. All the characters in the range 0-127 are returned good but I get ??? for all above 127.
Here is some more details:
OS: win2k
Local setting for current user: Greek (not that it makes a difference)
Default Language setting for the System: English (Astralia). This uses charSet Cp1252 or ISO 8859-1 encoding.
Environment: JBuilder 7.0
JDK: 1.4.1
DB: MS Access
DB charSet: Cp1253 (Greek encoding or ISO 8859-7)
Connection method:
java.util.Properties prop = new java.util.Properties();
prop.put("user" , userName);
prop.put("password" , password);
//driver is "sun.jdbc.odbc.JdbcOdbcDriver";
//none of these work
//prop.put("charSet", "UTF-8");
//prop.put("charSet", "Greek");
prop.put("charSet", "Cp1253");
connection = DriverManager.getConnection(MY_ACCESS_DB,prop);
DataSet Access method:
// run query and get resultSet rs here
char[] cBuff= new char[1000];
// I have tried getString(), getBytes(), getBinaryStream also
Reader rReader = rs.getCharacterStream(3);
BufferedReader fIn = new BufferedReader(rReader);
int res = fIn.read(cBuff, 0, 999);
// contents of cBuff is incorrect here
I have also used -Dfile.encoding=Cp1253 in command line which seems to change the default charSet of the JVM. Tested
String en = new InputStreamReader(System.in).getEncoding();
System.out.println("Default encoding: " + en);
By enabling trace and looking at the content of the resultSet object it shows that
rs.OdbcApi.charSet = "Cp1253"
So I'm absolutely stumped. The only possible problems I can think of is either a bug in the jdbcodbcDriver or in my native ODBC driver. The latter is less likely since I connected to the same datasouce using a different application and get the right result.
One more thing that may be helpful, if I set up the default charSet under Win2K to "Greek" (that is setting default language setting in Regional Options under Control Panel)
Everything works fine.
Is there anyone out there with answer to my problem?
Thanks in advance.Tried your program and it does exactly as I expected. I get a whole lot of '?'s with my OS default language setting on English but it works fine as soon as I set it to Greek. It does not make a difference if I change the "input language" on the language bar (shift+ctrl) to Greek or not. Or if I change the charSet in your program to something else. Which bring up the question what do you use the charSet setting on your program for? If it is for byte conversion, I don't think you need it since the OS default charset is used by ResultSet.GetString and that needs to be set anyway.
Anyhow your program basically behaves exactly the same way as mine does. I am almost 100% sure that the problem is with the properties used (or not used) when creating the connections. There has got to be a (provider) property like "useUnicode" or "charSet" or something that is passed through jdbcodbc bridge to ODBC to MS Access to force it to return the result set in UTF-8 format. I confirmed this by using Visual C++ data access program that i wrote (which has the same sort of problem). All other MS Office products know about this property that why they work when i imort data from them.
This means I don't have a jdbc or even a java problem but my problem is MS Access related. So I�m going to post a question on an MS Access user group (if I find one) and see what I get). Thanks for your help with this.
By the way AOKabc crashed once and froze another time. I think it had more to do with the libraries you are using rather than your code. I have a trace log if you are interested.
Soheil -
Anyway to set an event for the fifth Monday of the month?
I have an event that happens rarely. Is there anyway to set an event for the fifth Monday of the month?
Hi Kevin,
This should be similar to behaviour in my response to this thread, but iCal seems a bit off on this one. If you attempt to set an event on the 5th Monday iCal adds events to the first Monday on the month after if the month only has four weeks. I'd say this is a bug in iCal.
Try the script below which should add an event to the 5th Monday only to see what I mean:
(Copy blue text into Script Editor (Applications > Applescript > Script Editor) , press Run and follow prompts.)
tell application "iCal"
set myCal to first calendar whose title is (item 1 of (choose from list (title of (every calendar) as list) with prompt "Choose calendar"))
set myName to text returned of (display dialog "What is the event's name?" default answer "5th Monday of month?")
set myStart to my date "Monday, January 30, 2006 10:00:00"
set myEnd to myStart + 1 * hours
make new event at the end of events of myCal with properties {summary:myName, start date:myStart, end date:myEnd, recurrence:"FREQ=MONTHLY;BYDAY=5MO"}
end tell
Best wishes
John M -
OBIEE 11g - Customized Message for No result On all Reports
Hi,
The default messages displayed is getting displayed when a report returns no data in OBIEE 11g. I am aware of that, we can overide the default message with our Custom message at "Analysis" level. but it is very painful to do.
I am looking for a file where we can override the default messages with our custom message at one place.
Also, I have gone through the below link for this but it has change at the language level. I tried to change it at language "l_en" level but it did not work.
can anyone suggest for 11g?
http://obiee10grevisited.blogspot.com/2012/02/customized-message-for-no-result-on-all.html
Edited by: Nagen on May 6, 2013 4:36 PMHi Nagen,
Using a custom message should also work in 11g. Refer to this link for setting up custom messages in 11g.
http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages/
Thanks,
Gaurav -
How to Colour the fields in the Result Set of the query
Hi all,
I am having a requirement wher the user want to view the queries results with some colour to the char in the result set.
suppose customer is the row he want to view some customers with one color and some with different color.
Is it possible in Bi.
If so Plz let me know
RegardsHi Priya,
for the macro thing, you will have to create a workbook and store your query into it, because macros are attached to only workbooks and not queries.
in the workbook screen (i.e. excel), go to tools --> Macro --> Visual Basic Editor. or simply press Alt + F11. this will take you to macro editor screen.
you can use code that may look something like below to color the columns, you can also give constant column if they are fixed.
sub ColorColumns(rngTarget As Range, _
intColor As Integer)
Dim c As Long
With rngTarget
.Interior.ColorIndex = intColour
Next c
End With
End Sub
You will find some easy and short snippets for this.
Regards,
Purvang -
How to send email using pl/sql containing the result set as the msg body
Hi.. im using Pl/SQL code to send emails to the users from a dataset that is obtained in a databse table. i have used utl_smtp commands to establish the connection with the smtp mail server. im stuck at the logic when i have to include the message body which is actually the result set of a table.. For instance
IF (p_message = 0) THEN
UTL_SMTP.write_data(l_mail_conn, 'There is no mismatch between the codes' || UTL_TCP.crlf);
ELSE
UTL_SMTP.write_data(l_mail_conn, 'The missing codes are ' || UTL_TCP.crlf);
for s in (select * from temp)
loop
UTL_SMTP.write_data(l_mail_conn, ' ' ||s || UTL_TCP.crlf);
end loop;
END IF;
UTL_SMTP.close_data(l_mail_conn);
UTL_SMTP.quit(l_mail_conn);
END;
***p_message is a prameter passed to this procedure..
Can i obtain the result in the form i have it in my table. which has three columns. I want to display the three columns as it is with teh records. ?this is not related about this forum but you can use below,
CREATE OR REPLACE PROCEDURE SEND_MAIL (subject varchar2,mail_from varchar2, mail_to varchar2,mail_msg varchar2)
IS
mail_host varchar2(30):='XXXXX';
mail_conn utl_smtp.connection;
tz_offset number:=0;
str varchar2(32000);
BEGIN
begin
select to_number(replace(dbtimezone,':00'))/24 into tz_offset from dual;
exception
when others then
null;
end;
mail_conn:=utl_smtp.open_connection(mail_host, 25);
utl_smtp.helo(mail_conn,mail_host);
utl_smtp.mail(mail_conn,'[email protected]');
utl_smtp.rcpt(mail_conn,mail_to);
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn,'Date: '||to_char(sysdate-tz_offset,'dd mon yy hh24:mi:ss')||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'From: '|| mail_from ||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'To: "'|| mail_to ||'" <'||mail_to||'>'||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'Subject: '||subject||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,utl_tcp.crlf);
utl_smtp.write_data(mail_conn,replace_turkish_chars(mail_msg)||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,utl_tcp.crlf);
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
END;
Edited by: odilibrary.com on Jun 12, 2012 5:26 PM -
Is there a way to get an alarm for my events for the iCal on the iPhone 4?
Is there a way to get an alarm for my events for the iCal on the iPhone 4?
Greetings,
See page 113 of the iPhone 4 user manual: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
When you add an event to the Calendar.app of the iPhone 4 there is an "Alert" option which should give you the desired result.
Cheers. -
How to add a dummy row in the result set of a SELECT statement.
Hello Everyone -
I have requirment to add a dummy row in the result set of a SELECT statement.
For e.g. lets say there is a table Payment having following colums:
Payment_id number
status varchar2(10)
amount number
payment_date date
so here is the data :-
Payment_id Status Amount payment_date
1 Applied 100 12/07/2008
2 Reversed 200 01/ 06/2009
3 Applied 300 01/ 07/2009
Here is my SQL
Select * form payment where payment_date >= 01/01/2009
Output will be
2 Reversed 200 01/ 06/2009
3 Applied 300 01/ 07/2009
My desired output is below
2 Reversed 200 01/ 06/2009
3 Applied 300 01/ 07/2009
2 Reversed -200 01/ 06/2009 ------(Dummy Row)
Thrid row here is the dummy row which I want to add when status is "Reversed"
I would be very thankful for any kind of help in this regard ...
Thanks,
GauravCartesion joining against a dummy table is a useful method of creating a dummy row:
with my_tab as (select 1 cust_id, 1 Payment_id, 'Applied' Status, 100 Amount, to_date('12/07/2008', 'mm/dd/yyyy') payment_date from dual union all
select 1 cust_id, 2 Payment_id, 'Reversed' Status, 200 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all
select 1 cust_id, 3 Payment_id, 'Applied' Status, 300 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all
select 2 cust_id, 1 Payment_id, 'Applied' Status, 100 Amount, to_date('12/07/2008', 'mm/dd/yyyy') payment_date from dual union all
select 2 cust_id, 2 Payment_id, 'Reversed' Status, 200 Amount, to_date('01/05/2009', 'mm/dd/yyyy') payment_date from dual union all
select 2 cust_id, 3 Payment_id, 'Applied' Status, 300 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all
select 2 cust_id, 4 Payment_id, 'Reversed' Status, -400 Amount, to_date('01/06/2009', 'mm/dd/yyyy') payment_date from dual union all
select 2 cust_id, 5 Payment_id, 'Applied' Status, 500 Amount, to_date('01/07/2009', 'mm/dd/yyyy') payment_date from dual),
--- end of mimicking your table
dummy as (select 'Reversed' col1, 1 rn from dual union all
select 'Reversed' col1, 2 rn from dual)
select mt.cust_id,
mt.payment_id,
mt.status,
decode(dummy.rn, 2, -1*mt.amount, mt.amount) amount,
mt.payment_date
from my_tab mt,
dummy
where mt.status = dummy.col1 (+)
order by mt.cust_id, mt.payment_id, dummy.rn nulls first;
CUST_ID PAYMENT_ID STATUS AMOUNT PAYMENT_DATE
1 1 Applied 100 07/12/2008
1 2 Reversed 200 06/01/2009
1 2 Reversed -200 06/01/2009
1 3 Applied 300 06/01/2009
2 1 Applied 100 07/12/2008
2 2 Reversed 200 05/01/2009
2 2 Reversed -200 05/01/2009
2 3 Applied 300 06/01/2009
2 4 Reversed -400 06/01/2009
2 4 Reversed 400 06/01/2009
2 5 Applied 500 07/01/2009Edited by: Boneist on 07-Jan-2009 23:10
NB. You may have to mess around with the ordering if that's not come back in the order you wanted. You didn't mention what the rules were for any expected ordering though, so I've made up my own *{;-)
Also, I added an identifier (cust_id) to differentiate between different sets of payments, since that's usually the case. Remove that if it's not applicable for your case.
Maybe you are looking for
-
Unique ID of an object instance
Is there a way to get a unique Id of an object at runtime? Once I have that, I would like to invoke methods (and access all memebers) on it via this ID. I do not want to utilize reflection if at all possible. Thanks -nat
-
Can I add a picture not as a smart object?, i need to move it.
Im working on a project in school and i had to make illustrations for a animation. The one to animate my illustration asked for all the parts of the girl in separate layers so he could make her move. I made the girl in Illustrator but when I tried to
-
Connecting Dual Monitors to my HP Laptop
I have a HP Envy dv7 Laptop. Windows 8.1 Inter Core i 7-3630QM [email protected] GHz 16GB Ram 64 bit 1 TB HD Intel HD Graphics Nvida GeForce GT 635m 2 monitors: HP w2207h W?: 1-HDMI; 1-VGA & 1- USBin. 2-USB out HNC LCD 27" Monitor HDMI 1 HDMI 2 VGA
-
I cant connect my ipad 2 to the wifi unless right next to the router
i cant connect my ipad 2 to the wifi unless right next to the router
-
Hello, everybody. I have a black MacBook, 2.4 GHz, and I ran a PA through it once while trying to mix audio and it blew out the sound card and the speakers. I would like to be able to use the headphone jack again, but it doesn't work; I was wondering