Customer reference has two identical primary site uses
This customer reference has two identical primary site uses
defined in RA_CUSTOMERS_INTERFACE. Please update the SITE_USE_CODE
field or the PRIMARY_SITE_USE_FLAG so that only one primary site use exists per customer and site use code.
Thanks in advance
Check Note: 181622.1 - Customer Interface Imports Multiple Shiptos For A Customer With No Site Use Code
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=181622.1
Similar Messages
-
My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?
I have the same problem. Right now my iPhone 5S shows 3 instances of the computer to which it is connected under Settings » General » iTunes WiFi Sync. I'm having problems connecting and syncing, and this is probably the cause: the phone chooses one of these connections, and it isn't the one that's actually in use. What's probably happening is that the phone and computer establish a connection using a dynamic IP address, the address becomes "disassociated" due to error, another address is associated, the phone retains each address/link, and each link is displayed as if it represents a separate computer (the fact that the name of the computer is identical is ignored, as the only thing that is considered important is the IP address). But that's all conjecture. More important, I'm not sure how to fix the problem. A network reset doesn't do it.
-
what is the difference between Safari 5.1.7 and 5.1.10?
I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)Might be the security fixes > Safari 5.1.10 for Snow Leopard
-
SCCM central site and primary site use the same SQL SERVER with two Instance.
Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community SupportAlthough you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa -
WLC in two different WAN sites using same DNS
I have two different wlc's that are located in different locations and WAN sites. I want them to use the same DNS for both sites since there is no need to add a specific server in the small areas. When adding a DNS entry for "cisco-capwap-controller" for AP discovery, is there a way to make it distinguish which local controller to use?
Hi,
We had a similar issue with different controllers in different sites, for different wireless networks. I got around the issue by creating wireless specific subdomains to hold the relevant dns records in.
For example:
Site A = siteA.rf.mycompany.com
A Record = cisco-capwap-controller 10.1.1.100
Site B = siteB.rf.mycompany.com
A Record = cisco-capwap-controller 10.2.2.100
Site C = siteC.rf.mycompany.com
A Record = cisco-capwap-controller 10.3.3.100
HTH
Paul -
Two primary sites in the same AD site
Can I have two separate Primary sites in a single AD? I've done it in the past in a lab, but never in production. How do clients lookup services in AD? Should I set command switches on the client install to force the clients to the correct
site? Any best practices in this area?It should work. Just make sure to use different site code, no overlapping boundaries and discoveries.
For client installation point the to the right site code.
I'm not sure if it's supported by Microsoft.
Benoit Lecours | Blog: System Center Dudes -
Upgrade OS of Primary Site (2008 R2 to 2012 R2)
Our org has a single primary site (SCCM 2012 R2 5.00.7958.1203) and is comprised of two site systems/servers and roughly 2500 clients.
Site System/Server 1 has the following site system roles installed:
Distribution Point
Management Point
Software Update Point
Site System/Server 2 has the following site system roles installed:
Site Database Server
Reporting Services Point
Both servers are currently running Windows Server 2008 R2. We'd like to upgrade the OS of these two site systems/servers to Windows Server 2012 R2 but as I understand it, Microsoft does not support this as an in place upgrade (Infrastructure
Upgrade for Configuration Manager).
Also, while it is not absolutely necessary, it would be nice to rename the site systems/servers in the process in order to better conform to our organization's naming conventions.
What is the best process to accomplish this without any downtime to existing clients? I was thinking something along these lines...
Build out a 2nd site/servers with Windows Server 2012 R2 and the correct server names running side-by-side with the current production SCCM site/servers.
Grant the new site's MP computer account permission to modify the System Management container in Active Directory. Will this have any impact on the production environment and existing clients?
Re-install the clients from the new site that is running 2012 R2 OS.
Decommission the old site that is running on 2008 R2 OS.Grant the new site's MP computer account permission to modify the System Management container in Active Directory. Will this have any impact on the production environment and existing clients?
That will allow the new site to write information to the AD, if configured. That will only have an impact when you've got an overlap in the configured boundaries and you're using site assignment boundaries in combination with auto site assignment
of clients.
Also, if there is anything in the old environment that you would need in the new environment you can look at migrating those objects. See for more information:
http://technet.microsoft.com/en-us/library/gg682006.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
OAM : Which identity server is used by Password Policy?
Hi,
The OAM setup has two identity servers (ois1, ois2), two webpass (wp1, wp2) on two web servers. wp1 is pointing to ois1 only and wp2 is pointing to ois2.
We have two sets of Policy manager, Access server and WebGate. wg1 is pointing to aaa1 and wg2 is pointing to aaa2.
Now, when a user tries to access a OAM webgate protected page and the password policy gets applied, do the identity server comes into picture? if yes, which identity server is used here, ois1 or ois2?
I want to use ois1 for all the requests coming to webserver with wg1. How do I do it?
Thanks in advance.Hi Colin,
Thanks for your reply.
The reason I put this question was - in a scenario when I dont have Access Server (any access component), then also Password Polices work. So, I understand identity server is used here. When we have access side components, what makes OAM not to use identity server at all. Or is it the feature of OAM - when the accessed resource is ptotected by WebGate the Password policies are taken care of by Access Server, otherwise by identity server or is it because of the 'obReadPasswdMode' and 'obWritePasswdMode' in the authentication scheme?
I stopped my identity server and I saw the password policy working - so I know the behavior; still asking the above question for my better understanding of OAM.
Thanks for your help! -
Receiver File adapter : two choices "Directly" and "Use Temporarly file" ?
Hi All,
I am writing the file into a folder and I want to write the file completely into the folder.Once the file is placed , one tool will be keep on picking files every second from this folder.So I need to put the file after filling entire data.
In the File adapter, the put file option has two choices "Directly" and "Use Temporarly file".
"Directly" option will serve my purpose?
Which option I need to keep for Empty-Message Handling "Write Empty file" or "Ignore"?
Thanks
SeemaHi Mohamad,
>> You need to place in the some other folder and do the transfer completely and move the file to desired location using command line parameters as recommended in the previous answers.
I will be posting all the files as .txt files. Can we move the file by using command line parameters for FTP connection?
I heard that we can get do it only for NFS and we cannot do for FTP connection.?
Can you please suggest the command line how to use it.
Thanks
Seema -
Using a custom certificate store for SCCM 2012 clients and primary site server
I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion. -
How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?
Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support -
I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.
-
I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases. I have 4 devices and my wife has two. Right now they are all using the same mobile me account to sync just the calendar and address book.
1.) I want to add email syncing for my 4 devices and email syncing for my wife's two devices separately, but we want to sync and share the same calendar and address book. Is this possible?
2.) I also have 5 different calendars, one for work, one for home, one for... etc. Is there a way to have different devices only sync certain calendars and not others or is it an all or nothing deal?
Thanks in advance for any tips!
STo begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
Generally speaking it is not a good idea to share an iCloud account between different people, it often results in contracts, calendars et cetera being deleted by others. Saying that however you can add secondary iCloud accounts to your devices at settings> mail, contacts, calendars. Secondary accounts do not have all the features of a primary account, but are often very useful. Because you can enable or disable each individual feature of an iCloud account, you can cover almost any situation by using secondary accounts. -
One primary site with a remote DP/MP, or two with a CAS server?
Hi
For a new SCCM 2012 environment, we have the following setup:
- HQ site with 1500 PCs/users
- Branch office in a separate AD site, slow WAN link, 120 PCs/users
Now, I'd like to keep the setup simple so my first instinct is to deploy one primary site with a server in the branch office fulfilling the MP/DP/PXE/Update Point roles.
However, the site has a local technician who needs the ability to deploy images to the local machines. Running the console from the branch office to the HQ site is not an option, since consoles (such as ADUC) have very poor performance over the WAN.
This brings me to the option of either a primary HQ site with a branch secondary site (something I'd like to stay away from, since it requires SQL and the technician would still need to connect the console to the primary site anyway!), or 2 primary sites both
connected by a CAS server. For what the technician needs, I think this is overkill, and I don't like the idea of the added complexity, or keeping both sites in-step as far as replication is concerned.
Im leaning towards the 1 primary site, remote MP/DP option, but Im not sure how the technician would image machines without the console. I thought perhaps creating an optional advertisement to a dynamic collection that he could control another way (e.g.
using a registry key), giving him the option to trigger deployments.
Thoughts?Having a local DP will ensure that all deployments are made locally if the content is distributed.
You'll have to get your content there first, if possible build your DP in your main office and ship it to the remote location after. Otherwise use prestage content. Getting GB of stuff throught that link will otherwise take days.
For your deployment, why does the technician need access to the console ? Could you deploy to "unknown computers" ?
Benoit Lecours | Blog: System Center Dudes -
I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months each year. When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud? Does Icloud push all the new calendar and contact items over the old items?
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.
Maybe you are looking for
-
Unable to read Properties file from Java code
Hi, The directory structure of my application is as follows:- My App ++++++ src ++++++++com ++++++++++readProp.java ++++++++resource ++++++++++message.properties I am trying to read the file as follows:- <code> public Static final string FilePath="re
-
My iphone 4s says my sim kard isn't valid
my iphone 4s says my sim kard isn't valid
-
Thunderbolt HDMI adapter compatible with my DisplayPort?
I have a mid 2009 Macbook Pro, but may eventually get a newer one that has Thunderbolt instead of mini DisplayPort. For the time being, however, I need an HDMI adapter. If I purchased a Thunderbolt to HDMI adapter, would it at least transfer the vide
-
Cannot select multiple airports using remote app.
Why can't I select multiple airport express units using the remote app?
-
How to open a multitrack project recorded in Protools in Logic 9
Howdy folks - My band just recently recorded a multitrack project in Protools 10 that we'd like to import or open in Logic 9 for overdubs and the final mix and master. I haven't a clue how to do this. I've heard Protools will export or save to .omf w